Deployment with motion

Hi All,
I am deploying a system that uses the the NI 73xx pallete.
I have put together a VI called "Initialise Motion.vi" which contains the 73xx palette VI, "Initialize Controller.flx".
Whenever I deploy and attempt to run I get the attached error telling me that the "Initialise Motion.vi" is broken but I can run the vi on the development PC.
Does anyone know why this is happening?
Thanks,
Sean
Solved!
Go to Solution.

Hi,
You need the NI Motion Device Driver installed on your target system. You can get the depolyment tool to run the NI Motion installer at the need of the deployment?
Regards
Ray Farmer

Similar Messages

Java DC not deployed with WebDynPro DC

Hi,
I've been testing the DC functionality and I'm trying to create the following:
1) WebDynPro DC (DCA)
2) Java DC (DCB)
DCB has code for reading data from a database table (three classes, one is set as a public part). This code is functioning ok in another WebDynpro project where I've used it as an external jar file located in the lib directory and added to classpath.
DCA has a small table in the view that I'm filling (or trying to) with data from the database.
DCB has one java class as a Public Part. DCA has this PP defined in the Used DC's (DC Metadata --> DC definition --> Used DC's). I can see the DCB code fine from the DCA's view (I can use the methods from the class).
I see no code errors and everything compiles ok. I've built the DCA and DCB separately (Development Component --> Build) before doing the project build and deployment.
When I deploy, I'm getting java.lang.NoClassDefFoundError for the DCB class (User.class) when the program starts. So it seems that the DCB is not deployed with the DCA. I've tried to look at the properties and java classpath but nothing I've done has helped.
Purpose is set to compilation, and there is a
<at-build-time/>
tag in the .dcdef file.
Deployment of normal (no DC) Webdynpro projects works fine and the jars in the lib directory are deployed to the server OK.
Seems like I've tried everything but have found no solution yet. Refreshed every part, re-created everything, re-built, re-deployed etc...
Shortly: how to get DCB to deploy ?
Any help is appreciated here
Kind Regards,
Jari Pakarinen

Hi,
What is the Java DC for then ? If it cannot be used as a part of another DC (deployable unit) then how should it be used ? What is the use if it does not end up at the server with Webdynpro code ?
The scenario I'm looking for is to include Java classes in a Webdynpro project as a part of the project (not jars done somewhere else, I can do that already) deployed to the server with the Webdynpro.
Thank you for your help, I'm not blaming you or anything
Regards,
Jari

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

How do I make interactive DVD/Blu-Ray menus with motion?

So, adobe doesn't support Encore anymore which means I can't use dynamic link to AE to create interactive DVD/Blu-Ray menus with motion.... or can I? Is there something I'm doing wrong? While in Encore, I go to dynamic link and boom, dynamic link to AE is not highlighted. If I can't make an interactive menu with motion using adobe, then what can I use? This is causing a major problem for me and my clients. (if i over looked the answer to this in another post, my apologies)

You can use the "Create After Effects Composition." This prompts you to create an independent version of the Encore PSD menu file, and opens the layered file in AE CC and creates a new composition with appropriate settings. AE no longer has mpeg export, so you export from AE to AME.
There were some workflow options that I did not play with much, but they were never what I saw as the basics for using AE to create the motion background.
You need to understand these two help pages:
Adobe Encore * Menu timing and looping
http://help.adobe.com/en_US/encore/cs/using/WSF49EA5DB-3743-49c2-9831-F66328B192F8.html
Adobe Encore * Using After Effects to enhance menus
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
I'm not sure what you mean by "interactive" unless you just mean creating navigation.

Still image with motion has flicker pulsating problem

I use FCP 5.0.4
I have read the many threads about this subject and am still not able to succeed in getting rid of the flicker/pulsating in a still image with motion.
I would say about 25% of the stills with motion have the jitters; all the rest look great.
The first thing I tried was
Effects:Video Filters:Video:Field Shift:none
as well as
Effects:Video Filters:Video:Flicker Filter min, med, and max.
Maybe 5% were corrected with this, but the other 20% still had the jitters even after using a combination of the above or by themselves.
I just burned a test DVD using a variety of the persistently jittery stills from my current project and although the jitters change a bit, they were still there so all of these failed:
1. Effects:Video Filters:Video:De-interlace Upper (odd)
2. Effects:Video Filters:Video:De-interlace Flicker Filter minimal
3. Effects:Video Filters:Video:De-interlace Flicker Filter max
4. Effects:Video Filters:Color Correction:Broadcast Safe conservative 115
5. Effects:Video Filters:Video:Flicker Filter max
6. All the tricks together which means
Effects:Video Filters:Video:De-interlace set at Upper (odd)
Effects:Video Filters:Video:Flicker Filter max
Effects:Video Filters:Video:Shift Fields: none
Effects:Video Filters:Color Correction:Broadcast Safe conservative 115
I know this issue has been kicked around a lot and i know some folks are not happy that it has to be kicked around at all. But I am doing something wrong because my DVDs look very un-PRO. Would anyone like to talk me through this nightmare preferably with as many details as possible since I am obviously missing something critical.
Thanks in advance.

There is no 'secret formula'. It just takes thinking through the issues.
1. Set the image size for each image that makes sense within the context of your project. Going significantly larger than the displayed area of that image (including movement) is just asking FCP to do additional work to resize the image. FCP is less sophisticated at resizing images than Photoshop. Use Photoshop and your planning of the movie to get the images to the appropriate size.
2. Wasted effort and totally irrelevant- you could set it to 7200 dpi if it makes you feel better.
3. Good idea - be sure to knock down areas of pure or very bright white. These are the elements that will give you the most trouble.
4. Don't do this unless you want to throw away HALF the picture information. Deinterlace deletes half the picture and then photoshop recreates it through interpolation of the remaining half of the picture. Why do this?
5. Make your determination based on what works. If you have properly exposed and sized the material, the need to blur is greatly reduced. ONLY do it on the images that need it. Why degrade every image if you do not need to do so?
6. See number 5
7. Lay out your time line early, view the work on an external broadcast monitor and only mess about with the images that require it.
In the psycho business they have term for much of the referenced post - it's called superstitious behavior. Basically it comes down to "It worked before so we recommend it to everyone without regard to their situation" ... here's another example:
Many years ago in my architecture practice, we had one of the early 512k macs (upgraded from the 128k!) I needed to show one of the interns how to create a project budget spread sheet in Excel. Inadvertently I clicked on Word, said "oops", closed it and opened Excel and we went to work.
A week later I was walking by the computer and overheard the same intern explaining how to work with Excel to another architect. "First you open Word, close it, THEN you open Excel", she explained. When asked by her 'trainee', why do you have to open Word first, wouldn't it just be easier to simply open Excel? Her answer was just perfect, "Well, it works every time, what's wrong with that?" so it goes ...
good luck with your project.
∏

How to use MDS deploying with EAR file

Hi everybody.
I would to use MDS in my web application in order to use customization across the sessions. I've performed every step to do this on JDeveloper (11.1.1.3.1). I've tested my application deploying directly from JDeveloper using Application menu > Deploy > "myApp" to "myApplicationServer" (in this way I can choose the repository with a window like this: http://i.stack.imgur.com/Kci9c.png). The repository was prevoiusly registered on the server. In this way my application works fine and they all lived happily ever after.
My problem occurs when I perform the deployment with "myApp to EAR" mode. When I try to install my EAR file in weblogic, it reply me with this error message:
An error occurred during activation of changes, please see the log for details.
+:oracle.mds.config.MDSConfigurationException:MDS-01335: namespace "/xliffBundles" mapped to metadata-store-usage "MAR_TargetRepos" but its definition was not found in MDS configuration.+
I've looked for a solution around the web (included this forum) and I think that I should modify something in adf-config.xml file (below).
Which steps I have to perform in order to install my application correctly with an EAR file?
Thanks in advance.
<?xml version="1.0" encoding="windows-1252" ?>
<adf-config xmlns="http://xmlns.oracle.com/adf/config"
xmlns:adf="http://xmlns.oracle.com/adf/config/properties"
xmlns:sec="http://xmlns.oracle.com/adf/security/config"
xmlns:ads="http://xmlns.oracle.com/adf/activedata/config">
<adf:adf-properties-child xmlns="http://xmlns.oracle.com/adf/config/properties">
<adf-property name="adfAppUID" value="BDO_GC_WEBAPP.bdogc"/>
</adf:adf-properties-child>

<sec:adf-security-child xmlns="http://xmlns.oracle.com/adf/security/config">
<CredentialStoreContext credentialStoreClass="oracle.adf.share.security.providers.jps.CSFCredentialStore"
credentialStoreLocation="../../src/META-INF/jps-config.xml"/>
<sec:JaasSecurityContext initialContextFactoryClass="oracle.adf.share.security.JAASInitialContextFactory"
jaasProviderClass="oracle.adf.share.security.providers.jps.JpsSecurityContext"
authorizationEnforce="true"
authenticationRequire="true"/>
</sec:adf-security-child>
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/faces/config">
<persistent-change-manager>
<persistent-change-manager-class>
oracle.adf.view.rich.change.MDSDocumentChangeManager
</persistent-change-manager-class>
</persistent-change-manager>
<taglib-config>
<taglib uri="http://xmlns.oracle.com/adf/faces/rich">
<tag name="column">
<attribute name="displayIndex">
<persist-changes>
true
</persist-changes>
</attribute>
<attribute name="frozen">
<persist-changes>
true
</persist-changes>
</attribute>
<attribute name="noWrap">
<persist-changes>
true
</persist-changes>
</attribute>
<attribute name="selected">
<persist-changes>
true
</persist-changes>
</attribute>
<attribute name="visible">
<persist-changes>
true
</persist-changes>
</attribute>
<attribute name="width">
<persist-changes>
true
</persist-changes>
</attribute>
</tag>
<tag name="table">
<attribute name="filterVisible">
<persist-changes>
true
</persist-changes>
</attribute>
</tag>
</taglib>
</taglib-config>
</adf-faces-config>
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config" version="11.1.1.000">
<cust-config>
<match path="/">
<customization-class name="oracle.adf.share.config.UserCC"/>
</match>
</cust-config>
</mds-config>
</adf-mds-config>
</adf-config>

Any suggestion?

How do I select an image with motion blur so that I can put it onto a different background ?

How do I overlay a image with motion blur on a white background (like the first image) onto a different background (to look like the second image)? any help would be greatly appreciated, many thanks ,ed
Message was edited by: motoredd

I’m afraid you may have bitten off more than you might want to chew.
The resulting pixels of an in-camera-blur combine information about the color/brightness of back- and foreground (edit: the result of surface properties and lighting conditions) with motion (basically transparency for this task) in such a way that it seems exceedingly difficult (maybe even improssible) to isolate the foreground in a »pure« form.
One may get a halfway decent mask (as the backgound is at least almost uniform and brighter than the foreground elements) but you may have to manually decontaminate the transparent areas, otherwise the masked object in front of a dark background would have a bright edge.

EJB3.0 App deployed with warning:Object not found in lookup of JPA_DEFAULT

Hi All ,
 I am working on NWCE7.1. I am deploying Enterprise Application DC wich is having
1 . 3 EJB3.0 session DCs
2. 1 JPA DC
I am getting following warning in deployment. I have checked persistence.xml for jta-data-source , it is added. Still not working. I am getting this error after importing configuration(Track) for these DCs in my NWDS. Earlier build n deployment was working in other NWDS on other PC.
--- Deploying file(s):
 D:\NWDS7.1\workspace.jdi\4\DCs\asianpaints.com\erecapp\_comp\gen\default\deploy\asianpaints.com~erecapp.ear
--- Status:
 Deploy finished with warnings.
--- Description:
 S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed: 0
Deployed with warnings: 1
Failed deployments: 0
~~~~~~~~~~~~~~~~~~~
1. File:D:\NWDS7.1\workspace.jdi\4\DCs\asianpaints.com\erecapp\_comp\gen\default\deploy\asianpaints.com~erecapp.ear
 Name:erecapp
 Vendor:asianpaints.com
 Location:J2N_ERECTT_D
 Version:20090217100038
 Deploy status:Warning
 Version:HIGHER
 Description:
 1. Exception has been returned while the 'asianpaints.com/erecapp' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
 com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 6358450:com.sap.engine.services.orpersistence.container.deploy.ActionException: [ERROR CODE DPL.DS.5030] Clusterwide exception: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of JPA_DEFAULT.
 at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:584)
 at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:343)
 at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:637)
 at javax.naming.InitialContext.lookup(InitialContext.java:351)
 at javax.naming.InitialContext.lookup(InitialContext.java:351)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initDataSources(ComplexModuleCreator.java:344)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initRuntimeModels(ComplexModuleCreator.java:230)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.createModule(ComplexModuleCreator.java:154)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.execute(ComplexModuleCreator.java:84)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexActionAdapter.execute(ComplexActionAdapter.java:34)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ApplicationCreator.execute(ApplicationCreator.java:74)
 at com.sap.engine.services.orpersistence.container.deploy.impl.PersistenceContainer.prepareStart(PersistenceContainer.java:187)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:219)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
 at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
 at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
 at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
 at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
 at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
 at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
 at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
 at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
 at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
 at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
 at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:877)
 at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
 at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
 at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
 at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initDataSources(ComplexModuleCreator.java:360)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.initRuntimeModels(ComplexModuleCreator.java:230)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.createModule(ComplexModuleCreator.java:154)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexModuleCreator.execute(ComplexModuleCreator.java:84)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ComplexActionAdapter.execute(ComplexActionAdapter.java:34)
 at com.sap.engine.services.orpersistence.container.deploy.impl.ApplicationCreator.execute(ApplicationCreator.java:74)
 at com.sap.engine.services.orpersistence.container.deploy.impl.PersistenceContainer.prepareStart(PersistenceContainer.java:187)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:219)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
 at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
 at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
 at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
 at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
 at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
 at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
 at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
 at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
 at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
 at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
 at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:877)
 at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
 at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
 at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
 at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Result
Status:Warning

You have to give an explicit data source in your persistence.xml to solve this error normaly.
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
 <persistence-unit name="YOUR_UNIT">
 <jta-data-source>DSNAME</jta-data-source>
Frank

Problem with Motion

I am using motion since long time. But yesterday unexpectedly my Motion failed. Dont know what happened. But now i couldn't open any existing motion file. It shows error. "Could not open file." I tried to install motion again. But it could not solved my problem. What can i do now?

Welcome to the forums. FYI, a more descriptive title can help getting a response quicker... Nearly all posts are about a problem with Motion...
See if this helps...
http://support.apple.com/kb/TS3061
Patrick

SCCM: Application deployment vs Package deployment with requirements and prerequisits.

Hey,
My organization is in the process of implementing a new remote networking solution for all employees, however some employees require additional software vs others. What I am trying to find out is if there is a way to have one package with supersedes and
requirements that we can use to do a massive deployement.
Here are the different scenarios with order of installation:
Financial group Desktop:
1.Install New solution
2.Install Configuration
3.Install Token Authentication
(nothing crazy)
Financial Group Laptops
1.Install Token Authentication
2.Install New Solution
3.Install COnfiguration
4.Un-uninstall Old Solution
5.Un-install Tunnel Guard application (requires a reboot, that's why it's last). (this is the application that would be deployed with requirements to go back up the chain of supersedes (meaning, deploy 5, but do 4, when 4 is triggered, it does 3 first, etc...)
All other laptops
1.Install New Solution
2.Install COnfiguration
3.Un-uninstall Old Solution
4.Un-install Tunnel Guard application (requires a reboot, that's why it's last).(this is the application that would be deployed with requirements to go back up the chain of supersedes (meaning, deploy 4, but do 3, when 3 is triggered, it does 2 first, etc...)
Because of the different requirements, is there a way to have one deployment with multiple deployment types to say based off:
1. Computer types (we have a naming convention that identifies laptops and desktops.
2. Only install certain pieces of software (Token validator in this case if financial application is detected on the machine).
Or should I create different applications for each case with different collections or go with 3 different packages and collections with install this package first set in the package deployment
Thanks for your help.

The problem is the last uninstall, because it's not applicable to all machines. That means that if you would deploy that with all it's dependencies, it wouldn't do anything on the desktops as it's not applicable to them.
In this case, if you want to use one deployment, the easiest solution is a task sequence. That way you can target everything in one time and still build some logic to prevent some (un-)installs.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Patch deployment with status "Enforcement state unknown"

Hi All
I am pretty new to the patch deployment.
I generated a report and see there is Last State column with "Enforcement state unknown", not sure if it means failed for those hostnames or will be retried for the installation.
Kindly clarify.
Regards
Ramesh
Regards Ram

They will only start to install updates automatically when there is an active update deployment with a scheduled deadline that has past. See for a lot more information:
http://technet.microsoft.com/en-us/library/gg682168.aspx#BKMK_SUMCompliance
Also, when Days since last communication is more than 0, that's usually an indication that the client is not communicating any more. That can be caused by a lot of things including something simple as that the device is turned of, or not
connected with the network.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Acquire encoder position with Motion and DAQ

Hi,
I am trying to acquire an encoder position with Motion. It seems impossible to set the frequency of the acquisition with Motion and I must poll for the position in a do-while loop.
I have read in a lot of threads that one can use RTSI lines to retrieve encoder position with a DAQ Board though it is acquired with a Motion board. But there are no examples at all about this.
To sum up, I need to send Encoder Phase A to RTSI0, Encoder PhaseB to RTSI1 (which I already do), retrieve info with a DAQ device and then calculate rpm.
Christophe
PS: please don't answer with measure angular position.vi or explain me in what this Vi can help me

Hi Christophe,
I'm not sure I understood well what you need. You have the angular position and you need to know the timing, am I right? Can you use an other counter on your card to get the period (or the frequency) of your signal? From that, I think you should be able to calculate the velocity.
I hope this helps,
Charlotte F. | CLAD
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> "Du 11 octobre au 17 novembre, 2 sessions en parallèle : bien démarrer - approfondir vos connais...

ESS/MSS business packages "Deployed with Warning"

Hello All,
 We are on NW04s SP10 on MS SQL server and Windows server. The Database and portal installations or on different machines. I installed the business packages ESS 1.0, MSS 1.0 and the XSS components - 600 using the JSPM.
After I deploy, I get the message "Deployed with Warning"
When I opened the log files and checked for errors, I found errors in deployment on these SDAs
sap.com/essfiaddr - WEBDYNPRO
sap.com/essinaddr - WEBDYNPRO
sap.com/essinpdata - WEBDYNPRO
sap.com/mssexpdyn - WEBDYNPRO
sap.com/mssexpssa - WEBDYNPRO
sap.com/mssoprogeneraldescription - WEBDYNPRO
And I get the following exceptions for all the SDAs above.
07/01/11 09:54:10 - sap.com/essfiaddr - WEBDYNPRO
07/01/11 09:54:10 - ***********************************************************
Jan 11, 2007 9:54:11 AM Info: End of log messages of the target system.
Jan 11, 2007 9:54:11 AM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jan 11, 2007 9:54:11 AM Warning: Finished with warnings: development component 'ess/fi/addr'/'sap.com'/'MAIN_ERP05PAT_C'/'795293':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application sap.com/ess/fi/addr and wait.
Reason: Clusterwide exception: server ID 11376250:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''sap.com/essfiaddr'' for startup. Reason=
Clusterwide exception: Failed to start application ''sap.com/essfiaddr'': The referenced application ''sap.com/ess~per'' can''t be started. Check the causing exception for details. Hint: Is the referenced application deployed correctly on the server?
 at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:317)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:227)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4684)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4589)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4562)
 at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Now, after this, when I log into the portal and see the MSS role, the links are all missing. I see only Overview and its worksets and pages and Reports and its worksets. Everything else is missing. The warning that I see is "Linked object is unavailable"
Could anyone please suggest me what could be wrong?
Thanks,
Sunitha

Hi Sunitha,
First of all I was not able to find if your backend is ERP 2004 or ERP 2005. It should be ERP 2005 if you want to user ESS 1.0 and MSS 1.0 BP
Please check in Content Administrator if you can locate these applications and test the same. If yes then you can ignore this warning. If No, in that case you have to redeploy XSS, ESS and MSS using SDM again.
The links in portal comes from your backend Area Page Customizing. To verify if the problem is with your Portal Business Package or with your backend customizing run your ESS applications using
http://<portal>:<port>/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenuArea?sap.xss.menuhdr=SAPDEFAULT&sap.xss.menuargrp=SAPDEFAULTESS
and MSS using
http://<portal>:<port>/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenuArea?sap.xss.menuhdr=SAPDEFAULT&sap.xss.menuargrp=SAPDEFAULTMSS
If you can see all the links correctly here, your backend customization is fine and there is a problem with your BP of ESS and MSS. So you will have to import the same again in the portal. However if you are not able to view the links in the page, then there is a problem with you Area Page Customization. You will need to check your config with the Client 000 configuration to find out the missing config.
Hope this helps.
Regards,
Shubham

SAP Netweaver 04 SP16 deployed with Xalan 2.60 or Xalan 2.70

SAP Netweaver 04 SP16 deployed with Xalan 2.60 or Xalan 2.70
Have you tried to port and run (Sneak Preview) SAPNetWeaver java 04 SP16 or 04S SP7 with a later version on Xalan version 2.60 or Xalan version 2.70 along with jdk 1.4.2_(8 or greater)?
What specifically is failing? What patches or work around have you used to overcome compatibility issues with Xalan?
When we run Sneak Preview SAPNetWeaver java 04 SP16 SP7 with a version on Xalan version 2.60 or Xalan version 2.70 along with jdk 1.4.2_11, We get error 503 Service Unavailable, Application cannot be started
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Error while parsing file data-source-aliases.xml.

Hi
SAP does not allow usage of any other XML parsers with SAP web AS.
please have a look at this link
http://help.sap.com/saphelp_nw04/helpdata/en/36/ef353e39011a38e10000000a114084/frameset.htm
"Setting system properties in a system that supports more than one parser is prohibited".
The Error which you are getting is because one of the
java.system properties for parsing is
getting changed by xalan. These system properties are explictly set by the SAP XML implementation which it does not allow you to change.
Also can you please let me know where are you placing the xalan jar file ? is it deployed as a j2ee library or part of war ?
Hope this helps. please mark points for helpful answers
regards
rajesh kr

Deployment with motion

Similar Messages

Maybe you are looking for