Description for field process_type in table crmc_proc_type

Hi All,
In which table can i get the description for the field process_type in table crmc_proc_type.I need to fetch the description.
Thanks in advance

hi anindya,
the description of transaction type you can get it from table CRMC_PROC_TYPE_T
just query to this table by the transaction type
hopes it helps
cheers

Similar Messages

  • Create search helps for fields of custom tables

    Hi,
    Could any one please provide me the step by step process to create search helps for fields in custom tables?
    Thanks in advance,
    Nobin.

    Hello Nobin
    There is basically no difference between a search help for standard vs. customer tables.
    An important choise is the selection method for your search help:
    Either you use your custom table, a view or a search help user-exit if you need to implement very specific requirements.
    Assuming that you can use your DB table as selection method the further implementation of the search help is quite straightforward:
    (1) Define the parameters you would like to have a selection criteria (SPos = SPos) and which should appear on the result list (= LPos).
    (2) Define the parameters that can be used as input for the selection (flag IMP) and are returned by the search help (flag EXP)
    Regards
      Uwe

  • Need a function module for fetching description of fields in a table

    Hi experts,
    I have a requirement where i need to fetch the descriptions of all the fields of a given database table.
    I am looking for a function module that gives the descriptions of a field. Please suggest a way.
    Points will be rewarded.
    Thanks in advance.

    Use FM DDIF_FIELDINFO_GET to get information about a field. Pass table name and Fieldname.
    Use FM DDIF_FIELDLABEL_GET if you need only the field label.
    Use FM DDIF_TABL_GET for getting information of all fields of a particular table.
    Regards,
    Lakshmi.
    Edited by: Santhanalakshmi V on Jun 11, 2008 5:26 PM

  • Which table stored  description for field name

    hi,
    for example,
    field name is  LIFNR , description (vendor number),
    which table stored this description (vendor number)  for that field name(LIFNR) ?

    1. From table DD03L, give your tablename and get all of its field names and corresponding data element names. 
    2. From table DD03T, get the description of each data element you have got in step 1. 
    3. Then Use Function Module DDIF_FIELDINFO_GET 
    DD02L : ALL SAP TABLE NAMES
    DD02T : DESCRIPTION OF TABLE NAMES
    DD03L : FIELDS IN A TABLE.
    Check the below link for more information.
    http://www.sap-img.com/abap/how-to-get-the-field-descriptions-of-a-table.htm
    Thanks,
    Balaji

  • Search help for fields in custom table..

    hi,
    in my custom table i have two fields - table name and field name. when user selects table name as VBAP , for field names i need all the fields in VBAP to be displayed and for that I set the check table as DD03L and I am able to see all the fields. But i am not able to see the description of the fields rather seeing field name , other key fields of DD03L.
    How do i get to display something like
    field name - description - length (length of the field as defined in DDIC)
    If search help will help then can u pl tell me how to create one ? or any standard can be used ?
    thanks

    Yes, you need to create search help and assign it to the field 'field name'
    Please search SDN for how to create search help. There are 100's of threads with this
    By the way the texts can be found in table DD03T  for tables as well as for fields

  • How to see the dropdown option for field of a table during selection

    Hello,
    I am adding a new custom field in the table. Now when user goes to the screen after clicking the content button icon in se11, he sees all fields for selection.
    That custom field is one character field. I want the user to see P and S option when he hits F4 (Dropdown).
    How can I achieve this ?
    Regards,
    Rajesh.

    hi check this..
    report .
    TYPE-POOLS : vrm.
    TABLES:vbak,vbap.
    DATA : v(80) TYPE c.
    DATA: wa_vbak TYPE vbak,
          it_vbak TYPE vbak OCCURS 0 WITH HEADER LINE,
          wa_vbap TYPE vbap,
          it_vbap TYPE vbap OCCURS 0 WITH HEADER LINE.
      DATA: l_name TYPE vrm_id,
            li_list TYPE vrm_values ,
            v_count  TYPE i,
            l_value LIKE LINE OF li_list.
    PARAMETERS: p_test(20) AS LISTBOX VISIBLE LENGTH 60 MODIF ID DAT.
    INITIALIZATION.
    AT SELECTION-SCREEN OUTPUT.
      PERFORM get_data.
      LOOP AT it_vbak.
        l_value-key =  it_vbak-vbeln .
        l_value-text = it_vbak-vbeln .
        APPEND l_value TO li_list.
      ENDLOOP.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = 'P_TEST'
          values          = li_list
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
    AT SELECTION-SCREEN ON P_TEST.
      clear : li_list , li_list[].
      SELECT vbeln
             matnr
             meins
             FROM vbap
             INTO CORRESPONDING FIELDS OF TABLE it_vbap
             WHERE vbeln = p_test.
    START-OF-SELECTION.
      SELECT vbeln
             matnr
             meins
             FROM vbap
             INTO CORRESPONDING FIELDS OF TABLE it_vbap
             WHERE vbeln = p_test.
      LOOP AT it_vbap.
        WRITE :/ it_vbap-vbeln, it_vbap-matnr,it_vbap-meins.
      ENDLOOP.
    *&      Form  get_Data
          text
    -->  p1        text
    <--  p2        text
    FORM get_data .
      SELECT  vbeln
              FROM vbak
              INTO  CORRESPONDING FIELDS OF TABLE it_vbak.
    ENDFORM.                    " get_Data
    regards,
    venkat

  • F4 help for field placed in table control

    Hi,
    I have place one field in table control.When I call POV for this field and return back , I found no value in that field.
    Is there any other way like to specify row index of selected field or any thing else?
    Pls tell me ...
    Thanks in advance..

    HI
    First check for standard search help is available for that particular field or not, if standard search help is available then assign to that field , if not use this
    FM :   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
             retfield        =  <FIELD NAME>
             dynpprog        = sy-repid
             dynpnr          = sy-dynnr
             dynprofield     = <screen field name>
             value_org       = 'S'
           TABLES
             value_tab       = t_vkbur
         EXCEPTIONS
           PARAMETER_ERROR = 1
           NO_VALUES_FOUND = 2
           OTHERS          = 3.

  • ALV for fields from multiple tables and make them editable

    Hi,
    I am working on a forecasting report. We have created few custom table e.g. store forcaset detail for whole year month wise. tables are say sales data, budget data, forcast data etc.
    Now i need to make a report based on monthwise based on above mention table.
    eg.o/p looks like:
    column name                     type desc monthapr monthmay .......
    table forcast                      Qty  sales    100          150
    table budget/sales             amt   amou    20.50    130.50
    table sales vs forcast       amt   amount  3000     50000
    -Now i don't know how to display data from multiple table in single ALV list that to with different field type.
    -2nd issue is i need to make only perticuler row editable so that user can chage data.
    -3rd when user change data and press calulate button - it should calculate data for future month - i got formula for that and disply the calulated data.
    - 4th if user like the forcast data then when press save - change data should update dbtable.
    Is this all possible with simple abap FM Or need to use ABAPOO.
    I will appericiate all expert help.
    Many thanks in advance.
    KDE.
    Edited by: kde_test on Jun 4, 2010 5:44 PM

    Hi,
    Solutions :
    1. You can use  FM REUSE_ALV_HIERSEQ_LIST_DISPLAY as guided by Ashutosh.
    You can also check out this
    [http://www.sap technical.com/Tutorials/ABAP/3DGraph/demo.htm]  change link to saptechnical without space
    2. [How to make certain rows in ALV grid editable...;
    3 & 4. Use two importing paramaters 'PF_STATUS_SET' 'USER_COMMAND' of  REUSE_ALV_GRID_DISPLAY.
    create two function codes 'CALC and 'SAVE' in pf-status and provide your required functionality to these function codes using User-Command.
    Sorry am unable to provide you with supporting code, but you can search for it and It can solve your problem
    Regards,
    Rohit

  • How to create F1 help for fields of a table in SM30

    I have a z-table which is being maintained using SM30. while creating new entries for the z-table using this SM30 i want to create F1 help which will be useful for the user to create new entries. can anyone pls help we this requirement?

    Hi Lalitha,
    To have F1 help documentation, you need to create Documentation by pressing Documentation button in the Change Data Element screen (SE11)
    If you need certain values for the field through F4 help then you need to specify the values in the Domain of this Data element (SE11)
    Jogeswara Rao K

  • Need to read all entris  for field prtxt from table /sapsll/prt

    hi
    i need to read all entries from table /sapsll/prt field prtxt but only one is coming
    pls see below seelct statement
    if not gt_sagmeld[] is initial.
                SELECT /sapsll/cuit~guid_cuit         " PK
                       /sapsll/cuit~QUANT_FLT         " to be displayed
                       /sapsll/cuit~QUAUM             " to be displayed
                       /sapsll/cuit~RPTDT             " to be displayed
                       /sapsll/cuit~guid_cuhd
                       /sapsll/cuit~guid_pr           " needed for gt_prt inttab
                      /sapsll/corref~refno
                       /sapsll/corref~guid_pobj
                INTO corresponding fields of table gt_sapsllcuit
                FROM ( ( /sapsll/cuit
                inner join /sapsll/cuhd on /sapsll/cuit~guid_cuhd = /sapsll/cuhd~guid_cuhd )
                inner join /sapsll/corref on /sapsll/corref~guid_pobj = /sapsll/cuhd~guid_cuhd )
                FOR all entries in gt_sagmeld
                WHERE /sapsll/cuit~guid_cuit = gt_sagmeld-guid_pobj.
             endif.
            if not gt_sapsllcuit[] is initial.
             select /sapsll/prt~prtxt
                    /sapsll/prt~guid_pr       
             into corresponding fields of table gt_prt
             from /sapsll/prt
             for all entries in gt_sapsllcuit
             where /sapsll/prt~guid_pr = gt_sapsllcuit-guid_pr.
    loop at gt_sagmeld into wa_sagmeld.
    read table gt_sapsllcuit into wa_sapsllcuit
    with key guid_cuit = wa_sagmeld-guid_pobj
    binary search.
    Read table gt_prcon into wa_prcon with key
    guid_pr = wa_sapsllcuit-guid_pr.
    if sy-subrc = 0.
    *wa_sagmeld_outtab-guid_pr  = wa_prt-guid_pr. 
    here i am facing problem as multiple entries from table  /sapsll/prt is not being displayed only one.....but i have checked in table it is having two enteries
    pls suggest
    reagards
    Nishant

    Hi Nishant!
    When you use 'for all entries' SAP (or database?) does a 'delete adjacent duplicates' on the result. This is necessary because of the special selection technique in this case.
    You need to select enough columns from /sapsll/prt, so that your two entries will differ in the result.
    Regards,
    Christian

  • Search Help for field of standard table used on non standar report

    Hi all.
    I need to know whether is posible to set up a "Search Help" / "Matchcode" for one standard field (LFBK-BKTVP) of a standard table (LFBK) that is going to be used on the selection screen of one new non standard report ZFK01.
    I was wondering if this could be posible under any special attributes, set up, ... for this field in the corresponding screen, but do not really know nor if that would work neither what to set up. Any other workaround would also be welcome.
    Could somebodly help?
    Thanks in advance. Regards,
    Abdali

    Hi ,
    Please try this code .It is working as per your requirement.
    *& Report  ZTESTPRO4                                      *
    REPORT  ztestpro4.
    TYPES:BEGIN OF ty_lfbk,
          bvtyp TYPE lfbk-bvtyp,
          END OF ty_lfbk.
    DATA:gt_lfbk TYPE STANDARD TABLE OF ty_lfbk,
         gs_lfbk TYPE ty_lfbk.
    PARAMETERS:bank TYPE lfbk-bvtyp.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR bank.
      SELECT bvtyp
         FROM lfbk
         INTO TABLE gt_lfbk.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield    = 'BVTYP'
          dynpprog    = sy-repid
          dynpnr      = sy-dynnr
          dynprofield = 'bank'
          value_org   = 'S'
        TABLES
          value_tab   = gt_lfbk.

  • Description for field value

    Hi All,
    I have created a screen field with F4 help.
    If i select an entry from the F4 list i need the description to be displayed in next to the field. How can we do this.
    Thanks
    Partha.

    Hiii Partha,
    You need to define one field for descripion...
    Then You must fire query which takes out description and fill that description into that field....
    Like For example :
    i want vendor's descritpion.....
    so
    select single name1 from lfa1
              into v-1
              where lifnr = v-2.
    where v-1 is varible which going to store ur descrioption
    and v-2 is variable which has already store value which u r going to use....
    (Here v-2 is LIFNR - vendor's name)
    I hope it may help you...
    Regards,
    Nirav Parekh

  • Event For Field Validation in Table maintenance generator

    Hi Friends,
    i need to validate the filed in my ztable , when the value is entered in to that field i,e if the value of that field is > 100 its should give error message. I already wrote code in the event  "Creating A New Entry" of event nor 5 as follows.
    FORM F_VALIDATE_BONUSRT.
      IF ZPRM_BONUS_RATE-BRATE > 100.
        MESSAGE 'Bonus Rate Should not exceed 100' TYPE 'S' DISPLAY LIKE 'E'.
      ENDIF.
    ENDFORM  .
    But this form is not triggering. pleas help me out.
    regards,
    linchon.

    Hi,
    Place a breakpoint in form.
    I tried doing same. Form gets triggered but your message will not get displayed.
    Use this format of message, then it will work -
    MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
    Regards,
    Harsh Bansal

  • F4 help for a field in item table in a view cluster

    Hi All,
    I have a view cluster with two tables. I should provide F4 help for field in item table based on the selected row of the header table.
    F4 should have only values fetched based on the header table entry.
    How can i achieve this. Please suggest.
    Regards,
    Kusuma K.

    Hi amar_war,
    use screen painter to edit the screen layout where the field VKBUR is on. Double click the field to get the details screen. Here you can attach a search help to the field.
    H_TVBUR has no more parameters, it will display a list of al sales offices with description text
    H_TVBVK will also show the sales group, if VKGRP is a screen field, it will restrict the result list automatically on matching VKGRP.
    H_TVKBZ has also VKORG VTWEG SPART - it will take those values from screen if filled.
    If you are not satisfied with the results, you can easily create your own search help using own selection method and own search help exits if required.
    Try standard search help for standard field first.
    You can create a copy of VKBUR as ZVKBUR and attach search help there, you can create your own screen structure and attach the search help there - 50 ways to get your search help...
    Regards,
    Clemens

  • FLEET Table, Possible Values For Field IS SI UNIT

    Dear experts,
    While doing analysis on fleet data I realized that for field IS_SI_UNIT (PM: Vehicle Data in SI Unit (e.g. Dimensions)) in table FLEET in two separate systems we have vehicle records set with different entries for this field.
    In one system vehicles are stored with value F: DB Unit set individually (new) 
    and in other one with value Y: DB Unit set through (new)
    Systems are SAP ECC 6.0
    Does anyone know what does it mean and what influence this has? In both systems vehicles are created by end users using standard PM creation transaction and those indicators are set in background while equipment is saved so there is not influence by end user.
    I could not find much information on SAP support portal about meaning behind possible values for field IS_SI_UNIT in table FLEET so was wondering if anyone knows more here?
    Thanks,
    Ivo

    Dear,
    There will not be any impact.Finally system will consider only SI units for fleet equipment consumption calculation.
    Kindly read note:366733 - Equipment/fleet: SI units in table FLEET and  372736 - Equipmt/vehicle:rounding error because of SI units
    It may help you.
    But in my system i can view only "Y"
    Regards,
    Pardhu

Maybe you are looking for