Desgin browser: Invalid HTTP server information

Hi,
when i try to view my design reporsitory using the design browser, i get a "Invalid Oracle HTTP Server information"
My inputs are
Oracle HTTP Server Host     : localhost
Oracle HTTP Server Port     : 7777 -- appears by default.
Oracle HTTP Server DAD     : desrep -- my design repository.
This is on owb 10g & DB 10g. The Design repository and the HTTP server are on the same m/c. I have done the installation and config as said in the install and config guide and am able to see my runtime repository reports.
Any pointers as to wats missing?
TIA
Aananth

I get the same issue, did you ever get a resolution?

Similar Messages

Invalid Oracle HTTP Server information

I am having problems with the Design Repository Report in Warehouse Builder Browser. When I try to logon I receive the message: Invalid Oracle HTTP Server information. This is the same database server that the client uses to logon to the repository. I can logon to the HTTP Server using a browser with the same host and port information. I set up the DAD with Mod plsql Configuration Menu using this information. What do I need to change?
OWB Client 9.0.3.33.0
OWB Repository 9.0.3.0.1

Did you already do this: Project menu -> Preferences -> Browser tab, set the HTTP Server port for the first option.
It's hard to make a mistake in setting the DAD, but just in case take a look at the instructions in the Hands-on Demo document, Prerequisites section, step 8. The Hands-on Demo is linked from Self-Service Education http://otn.oracle.com/products/warehouse/selfserv_edu/installation.html
Nikolai Rochnik

Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405

Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>

<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>


</system.serviceModel>
<system.webServer>

<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>


</system.webServer>
</configuration>
Thanks,
Swathi

Right on - I have done that a number of times.

Displaying a jpg on the browser using a simple http server.....

Hi
I've written a simple server which responds by sending a jpg file .
BROWSER ---request---> SERVER ( reads a jpg file, converts to byte[] and writes to browser )
^
|
|
<----response ----------
So I connect from the browser and the server sends a jpg and I'd to display that. Everything is thru sockets. There is no webserver as such.
The problem is, I'm getting the text fine, but instead of the picture, I get lots of characters...probably the browser is unable to interpret the jpg . How to I display the jpg ? Do I have to convert the characters in the server code before sending it ?
Anything to do with Base64 encoding ??
Thanks !!

All answers to this question including mine disappeared ??????
In order to serve an image or any other type of data over the HTTP protocol you have to supply the correct HTTP response header with the data.
The stream of bytes written to the client should be structured like this:
A status code followed by several lines of key/value pairs with header information, a blank line and finally the bytes of the image.
All lines in the header should end with \r\n no matter what OS the server is running.
HTTP/1.1 200 OK
Date: Wed, 07 Nov 2001 18:37:47 GMT
Server: MyServer/0.1
Content-Type: image/jpeg
Content-Length: 4321The Content-Length field must have the length of the image data in bytes. The Content-Type field must be the correct mime type for the image data.
Read RFC 2068 if you want or need more information.

Firefox Sync custom server fails - invalid HTTPS certificate

Windows XP SP3, Firefox 3.6.8.
Using a custom Sync server, the Weave minimal server written by Toby Elliot. Firefox Sync 1.4.4 extension is crapping out at the setup stage.
I've got a self-signed SSL certificate behind my web server, since it's for my personal use. I have the Sync extension on a couple of other Firefox installations, grandfathered through a few versions since Weave. Those extensions work and I can sync, no problem.
So the problem is not with my server itself, or with my username, or with my password. As I said, all three work fine with other Firefox installs.
This new setup process won't let me get past the "invalid HTTPS cert" error. Must I sign my cert with a certificate authority of my own, or will even that be marked as invalid?
Any guidance would be appreciated.

This can be fixed by browsing to the site and accepting the cert first but on my HTC incredible the buttons are off the screen and I can't scroll to them.....MOZILLA Please help!
Thanks and keep up the good work,
Peter

Nessus report says: Apache HTTP Server httpOnly Cookie Information Disclosu

Hi all,
Security area ran a Nessus script in the network and it found a known vulnerability over Oracle HTTP Server. Nessus gives a recomendation and I think is not the best recomendation because Oracle Application Server 10g R2 doesn't supports Apache 2.2.22 (only 1.3).
The question is:
What other action plan can I execute in order to solve the vulnerability issue?
This is the Nessus report:
Apache HTTP Server httpOnly Cookie Information Disclosure
Synopsis:
The web server running on the remote host has an information disclosure vulnerability.
Description:
The version of Apache HTTP Server running on the remote host has an information disclosure vulnerability. Sending a request with HTTP headers long enough to exceed the server limit causes the web server to respond with an HTTP 400. By default, the offending HTTP header and value are displayed on the 400 error page. When used in conjunction with other attacks (e.g., cross-site scripting), this could result in the compromise of httpOnly cookies.
Risk factor:
Medium
CVSS Base Score:4.3
CVSS2#AV:N/AC:M/Au:N/C:P/I:N/A:N
See also:
http://fd.the-wildcat.de/apache_e36a9cf46c.php
See also:
http://httpd.apache.org/security/vulnerabilities_22.html
See also:
http://svn.apache.org/viewvc?view=revision&revision=1235454
Solution:
Upgrade to Apache version 2.2.22 or later.
Plugin output:
Nessus verified this by sending a request with a long Cookie header : GET / HTTP/1.1 Host: ntoracolp01.intrallianz.es:7202 Accept-Language: en Accept-Charset: iso-8859-1,utf-8;q=0.9,*;q=0.1 Connection: Close Cookie: z9=AAAAAAAAAAAAAAAAAAAAA......
Pragma: no-cache User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0) Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, image/png, */* Which caused the Cookie header to be displayed in the default error page (the response shown below has been truncated) : <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <HTML><HEAD> <TITLE>400 Bad Request</TITLE> </HEAD><BODY> <H1>Bad Request</H1> Your browser sent a request that this server could not understand.<P> Size of a request header field exceeds server limit.<P> <PRE> Cookie: z9=AAAAAAAAAAAAAAA.......
Plugin ID:
57792
CVE:
CVE-2012-0053
BID:
51706
Other references:
OSVDB:78556, EDB-ID:18442, IAVA:2012-A-0017
Thanks

Thanks for reply
I've added read access to developer directory:
drwxr--r-x 11 developer users 4096 03-18 21:03 developer
Nothing changed.
error_log
[Tue Mar 18 22:42:47.462658 2014] [authz_core:error] [pid 2150:tid 2941197120] [client 192.168.1.100:56103] AH01630: client denied by server configuration: /home/developer/public_html
No idea how "public_html" get there?!
access_log
192.168.1.100 - - [18/Mar/2014:22:38:34 +0100] "GET /~developer HTTP/1.1" 403 1081
192.168.1.100 - - [18/Mar/2014:22:38:45 +0100] "GET /~developer/www HTTP/1.1" 403 1081
192.168.1.100 - - [18/Mar/2014:22:42:47 +0100] "GET /~developer/www HTTP/1.1" 403 1081
192.168.1.100 - - [18/Mar/2014:22:42:47 +0100] "GET /favicon.ico HTTP/1.1" 404 1099
192.168.1.100 - - [18/Mar/2014:22:42:47 +0100] "GET /favicon.ico HTTP/1.1" 404 1099
EDIT
Ok, I've found the solution for that. In file httpd-userdir.conf UserDir was "public_html" instead of "www".
Now I'm getting error 500
error_log
[Tue Mar 18 22:48:36.841443 2014] [mpm_event:notice] [pid 2803:tid 3074947456] AH00489: Apache/2.4.7 (Unix) mod_python/3.5.0- Python/3.3.5 configured -- resuming normal operations
[Tue Mar 18 22:48:36.841528 2014] [core:notice] [pid 2803:tid 3074947456] AH00094: Command line: '/usr/bin/httpd'
[Tue Mar 18 22:48:45.873329 2014] [:error] [pid 2805:tid 3033516864] make_obcallback: could not import mod_python.apache.\n
[Tue Mar 18 22:48:45.874559 2014] [:error] [pid 2805:tid 3033516864] make_obcallback: Python path being used "['/usr/lib/python33.zip', '/usr/lib/python3.3', '/usr/lib/python3.3/plat-linux', '/usr/lib/python3.3/lib-dynload', '/usr/lib/python3.3/site-packages']".
[Tue Mar 18 22:48:45.874589 2014] [:error] [pid 2805:tid 3033516864] get_interpreter: no interpreter callback found.
[Tue Mar 18 22:48:45.874612 2014] [:error] [pid 2805:tid 3033516864] [client 192.168.1.100:56122] python_handler: Can't get/create interpreter., referer: http://192.168.1.108/~developer/
Last edited by maci3k (2014-03-18 22:37:32)

How to delete server information in http header?

Hello,
how could i delete the server information in the http-header?
HTTP/1.1 500 Internal Server Error
connection: close
server: SAP J2EE Engine/7.00 <--- this here
date: Tue, 11 Nov 2008 08:27:08 GMT
pragma: no-cache
content-type: text/html;charset=ISO-8859-1
content-length: 2046
set-cookie: saplb_*=(icdus445_PA3_03)39216850; Version=1; Path=/
Best regards,
Dennis

Hi,
the solution is to set the value for UseServerHeader to false.
This can be done from the VisualAdmin for the HTTP service of all servers + dispatcher.
Thanks for the support
Christian Birkle

Invalid WSDL - Certificate not trusted - Exception while publishing WSDL in OSR from HTTPS Server

Hi,
I am publishing a Web Service in OSR from an HTTPS Server. I am getting exception as
Error message:
WSDLException: faultCode=INVALID_WSDL: java.io.IOException: java.security.cert.CertificateException: Server certificate ....... is not trusted!
To remove this exception I have done following steps
a) Added Certificate from remote server in Identity Store of WebLogic Server using keytool utilitity
keytool -import -alias devCertificate -file c:/certificates/okdsoa.cer -truststore demoIdentityStore.jks
b) Added Certificate from remote server in the trust store of weblogic server using keytool utility
keytool -import -alias devCertificate -file c:/certificates/okdsoa.cer -truststore demoTrust.jks
This didnot help.
Then I imported certificate to OSR using PStoreTool command as
PStoreTool.bat add -config C:/OSRHome/registry111/conf/clientconf.xml -certFile c:/certificates/okdsoa.cer
Bounced the servers but that also didnot help.
Can you please suggest?
Thanks,
Parshant

I found the fix from Oracle Support Knowlededge Base
sslTool serverInfo --url https://HOST:9043 --certFile newcert.cer
PStoreTool located in REGISTRY_HOME/bin/PStoreTool add -config
WEBLOGIC_HOME/user_projects/domains/[osr_domain_name]/servers/[osr_server_name]/tmp/_WL_user/registry/[unique id]/public/conf/pstore.xml -certFile newcert.cer
I was updating wrong file with the certificate. It had to be pstore.xml. This solved my issue.
Thanks & Regards,
Parshant

Apex SSL from HTTP server - err 29040

Have apex environment (originally 3.1.2 now 3.2) workiing fine under http server 10.1.3. regular http port 7777.
After going thru the ssl and wallet documentation steps to apply certificates supplied to me, and scouring all the blogs, I'm still failing under https 4443 with:
SSL call to NZ function nzos_Handshake failed with error 29040
The default oracle ewallet.p12 lets me in after first complaining about the certificates. I made a new wallet, with owm, and added in the trusted certs that are suppsoed to match our internal browsers. Thats when things go wrong.
I've tried, and of course bounced opmnctl with stopall, startall after changing each one:
(1) in opmn.xml verified <ssl enabled="true"
(2) auto-logon checked in the wallet with cwallet.sso,
(3) left it off, regen'd wallet and set SSLWalletPassword to it's value,
(4) tried and verified different wallet locations and the right settings in ssl.conf. (feel confident the ssl.conf settings work cause I can cause other errors by commenting out SSLWalletPassword in ssl.conf with auto-logon=off),
(5) SSLVerifyClient set to none
(6) in opmn.xml verified <data id="start-mode" value="ssl-enabled"/>
(7) set LogLevel in httpd.conf to Debug (more output but nothing obviously usefull)
(8) set SSLLogLevel in ssl.conf to debug (more output but nothing obviously usefull)
any ideas would be much appreciated. AND especially does anyone know what the default password is for that default ewallet.p12 ?
if it told me during install I must have missed it. first born for that cause maybe I can modify it and add in my certs ?

Srini, thanks so much for helping. Sorry I didn't reply right off hand. To be honest I couldn't find doc id 473047 in metalink and then I finally got hold of our Certificate group and have been busy with them and just now got things resolved. Thanks again for replying. Really appreciate it.
If anyone else stumbles across this in the future, after having installed just the http server and not knowing much about it, the default pwd to the default wallet is welcome. (be sure and make a copy of this ewallet.p12 in conf/ssl.wlt/default before playing with it). The invalid cipher clues of the 29040 msg were not the direct problem in my case. For me it ended up being incomplete wallet information as the root cause under 10.1.3.
At first we had been just inserting trusted certificates into the wallet thinking that should match our inhouse browser images. Instead the "Warning, this is a development" msg kept showing. Finally we went thru the steps outlined in the documentation, using owm xwindows (or orapki) to create a new wallet from scratch, add a user certificate request, save the wallet, then export the user cert req to a flat file. You can then send that to your internal security group (assuming you have one) or whoever your Cert Authority is. They then send you back a new certificate that should constitute your User Certificate. You must first load in your trusted certificates (usually a Root and Issuing type trusted certs to constitute your "chain"). Then you can do a Import User Cert under owm and load in the afiorementioned fiel recvd from you security group. Also note the ON= value on your request must equal your DNS name as in server.xyz.com Also, I was being sent .key files that I could never import in. They then sent me pem files that had the key info blended in from what I understand and those worked.
I was able to get variations of the 29040 error (290xx) by trying different values within the HTTPD.conf -> ssl.conf file for the various SSL variables. In the end I've ended up with the modified settings of
SSLCipherSuite ALL
SSLProxyCipherSuite ALL
SSLVerifyClient none
SSLProtocol ALL
SSLProxyProtocol ALL
although I suspect other combinations would be fine as well.
The opmn/conf settings were set to the various values as seen in other postings and blogs but in the end did nto seem to be the issue for me. Other than modifying those <port local="6xxx" remote="6xxx" request="6xxx"/> to prevent the opmn logs from filling up fast. To do that I had to try different values that the ones found in some of the main google postings.

Invalid streaming server destination.

I'm getting this error:
Player error:
Invalid streaming server destination.
Please try again later.
Occurred with userGUID:
8fd2977f-cb33-zzzz-xxxxxxxxxxx
Clip ID: 78d46377-27fb-4b08-yyyy-xxxxxxxxxxx
Flash Player Version: WIN 9,0,124,0
Please include as much additional information about your
computer as possible by filling in the following information:
Web Browser and Version #: Avant Browser Version 11.6 Build
13 (basically runs as a skin utilizing most of IE 7)
Operating System and Version #: XP SP3
Total System RAM Installed: 1GB
Free Hard Drive Space Available: 2GB
Any help please?

Hello
ECDS , is a system which consists of service routers , service engines ,etc . When user sends a request for video the service router will be responsibe with integration (DNS) will hendle the requests from user after that will send these requests to service engines and so on , for more details . Please find the below links which will help
http://www.cisco.com/en/US/products/ps11281/Products_Sub_Category_Home.html
http://www.cisco.com/en/US/prod/collateral/video/ps11281/solution_overview_c25-677672_ps11854_Product_Solution_Overview.html
Thank you

Weblogic certificate is not being authenticated in Oracle HTTP Server

I am using Oracle HTTP Server with SSL and mod_proxy set up trying to pass a url through to the weblogic server. I start with my OHS url in the browser and the proxy is switches to the url to weblogic but I get the following error on the OHS side:
[2011-12-22T18:40:09.4683-07:00] [OHS] [INCIDENT_ERROR:32] [OHS-2077] [core.c] [host_id: denovm11-6] [host_addr: 10.139.164.196] [tid: 1155799360] [user: root] [ecid: 004hBXzInYHEOPb_THt1ic0007DM000002] [rid: 0] [VirtualHost: social.us.oracle.com:443] nzos proxy handshake error, nzos_Handshake returned 29024(server social.us.oracle.com:443, client 10.139.164.191)
[2011-12-22T18:40:09.4683-07:00] [OHS] [INCIDENT_ERROR:32] [OHS-2171] [core.c] [host_id: denovm11-6] [host_addr: 10.139.164.196] [tid: 1155799360] [user: root] [ecid: 004hBXzInYHEOPb_THt1ic0007DM000002] [rid: 0] [VirtualHost: social.us.oracle.com:443] NZ Library Error: Invalid X509 certificate chain [Hint: the client probably doesn't provide a valid client certificate]
[2011-12-22T18:40:09.4685-07:00] [OHS] [INCIDENT_ERROR:32] [OHS-9999] [core.c] [host_id: denovm11-6] [host_addr: 10.139.164.196] [tid: 1155799360] [user: root] [ecid: 004hBXzInYHEOPb_THt1ic0007DM000002] [rid: 0] [VirtualHost: social.us.oracle.com:443] (20014)Internal error: proxy: pass request body failed to 10.139.164.191:7001 (denovm11-1.us.oracle.com)
[2011-12-22T18:40:09.4685-07:00] [OHS] [INCIDENT_ERROR:32] [OHS-9999] [core.c] [host_id: denovm11-6] [host_addr: 10.139.164.196] [tid: 1155799360] [user: root] [ecid: 004hBXzInYHEOPb_THt1ic0007DM000002] [rid: 0] [VirtualHost: social.us.oracle.com:443] proxy: pass request body failed to 10.139.164.191:7001 (denovm11-1.us.oracle.com) from 10.139.164.196 ()
And the following error on the weblogic side:
####<Dec 22, 2011 6:40:10 PM MST> <Warning> <Security> <denovm11-1> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <8e6c6502a1af117a:4eeee51e:13466bb040d:-8000-000000000000a764> <1324604410502> <BEA-090482> <BAD_CERTIFICATE alert was received from denovm11-6.us.oracle.com - 10.139.164.196. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.>
Here is my ssl.conf from OHS:
# Oracle HTTP Server mod_ossl configuration file: ssl.conf #
# OHS Listen Port
Listen 443
<IfModule ossl_module>
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
SSLSessionCache "shmcb:${ORACLE_INSTANCE}/diagnostics/logs/${COMPONENT_TYPE}/${COMPONENT_NAME}/ssl_scache(512000)"
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
<IfModule mpm_winnt_module>
SSLMutex "none"
</IfModule>
<IfModule !mpm_winnt_module>
SSLMutex pthread
</IfModule>
## SSL Virtual Host Context
<VirtualHost *:443>
<IfModule ossl_module>
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional and require.
SSLVerifyClient none
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
SSLCipherSuite SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_DES_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA
# SSL Certificate Revocation List Check
# Valid values are On and Off
SSLCRLCheck Off
#Path to the wallet
SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/default"
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
BrowserMatch ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
</IfModule>
<IfModule proxy_module>
ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
# Path to the wallet
SSLProxyWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/default"
SSLProxyEngine on
SSLProxyVerify none
# ottest : denovm11-1
ProxyPass /test https://abc.us.oracle.com:7001/test
ProxyPassReverse /test https://abc.us.oracle.com:7001/test
</IfModule>
</VirtualHost>
</IfModule>
On the OHS side I have all the certificates needed so SSL is working properly. The weblogic environment is currently working fine with other webgates, but those are apache and we are trying to switch to OHS.
Can OHS use mod_proxy to connect to weblogic or do I need to use mod_wl_ohs?
Does anyone see anything wrong in my ssl.conf file in regards to the proxy section.
Thanks in advance.

In summary:
You need to create a new wallet with CSR (certificate signing req)
Send this to your certificate authority and get the signed server certificate.
Now import the signed server cert and the trusted root cert in to the wallet that you created newly.
Modify ssl.conf to point to the new wallet location.
To create wallet refer to : http://docs.oracle.com/cd/E25054_01/core.1111/e10105/wallets.htm#CHDGIJDC
Further reference: http://docs.oracle.com/cd/E25054_01/core.1111/e10105/sslconfig.htm#CBDGIJDF
Dont mind if this doc is 500 pages ;)

Error starting HTTP Server in Oracle9iAS 9.0.2 Infrastructure

Hi,
I have installed Oracle9iAS Infrastructure 9.0.2 on Windows 2000 Professional. Most of the components are working and I am also able to browse OEM at 1810 port.
The problem is with the HTTP server, it starts and after a while shutsdown automatically. I have tried both the methods to start HTTP Server:-
via windows start menu HTTP Server Startup link
via command: C:\Ora9iAS\dcm\bin\dcmctl start -ct ohs
In both the cases it fails, When using the command dcmctl start -ct ohs. The error code is ADMN-906025.
Can anyone tell me what could the problem be?
Bharat

With the command dcmctl geterror 906025 you will see the contents of the error (without a number dcmctl geterror gives the last error). You seem to have a problem with opmn. Check the log files in the $ORACLE_HOME/opmn/logs directory. The log file HTTP Server.1 (as it is called on linux) will probably contain more information as why the HTTP server fails to start.
Regards,
Andre

How can we debug Oracle Http Server on AIX.

Our requirement is to attach a debugger (dbx) to oracle http server on AIX.
For that purpose we need to start the OHS webserver service that is opmn in a single process mode the way we start Apache webserver by -X option.
Can anyone help how can we start OHS in single thread.

user9201760 wrote:
Hi,Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you've updated your profile with a real handle instead of "user9201760".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This would normally include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
Thanks for having included most of the information that is relevent to your question.
I have installed Oracle Apex 4.1 on Oracle 10g database but I want to configure Oracle HTTP Server on another Server(Microsoft Windows 2008 R2). Here I have placed Apache Tomcat 6.0 version already. Can anyone please tell me how is it possible to install and configure Oracle HTTP Server on Windows 2008 along with Apache Tomcat?Why? Installing OHS and the DB on separate servers will incur additional licensing costs.
More common confugrations would be to use Apache as a reverse proxy to an OHS+DB server, or Tomcat+APEX Listener with a DB server and not using OHS at all. (Although I understand Tomcat is not an Oracle-supported platform for the APEX Listener. For any questions on this or other Listener-related topics use the {forum:id=858} forum.)

Do we need Oracle HTTP server to host Oracle Apex ?

We are completely new to this Oracle Apex.
Wanted to know the licensing part of it , before we get into it.
I guess Oracle Apex is free as it comes with the Oracle database license.
1) Do we need some kind of HTTP server to host the Apex on the browser ?
2) Does any HTTP server will work with Oracle Apex ?
3) Any other free Oracle tool which we can use instead of licensing Oracle HTTP server for this Apex ?
Correct me if I am wrong.
Thanks in advance for the gurus out here.

johnpau2013 wrote:
We are completely new to this Oracle Apex.
Wanted to know the licensing part of it , before we get into it.
I guess Oracle Apex is free as it comes with the Oracle database license.
1) Do we need some kind of HTTP server to host the Apex on the browser ?Yes.
2) Does any HTTP server will work with Oracle Apex ?No.
3) Any other free Oracle tool which we can use instead of licensing Oracle HTTP server for this Apex ?
Correct me if I am wrong.OHS is covered by the DB license if OHS is run on the same server. See Joel's post and the document he links to: +{message:id=9256804}+.
For information about APEX HTTP server options, see:
<li>+About Oracle Application Express Architecture+
<li>+About Choosing an HTTP Server+
<li>+HTTP Server Requirements+
<li>APEX Listener

I configure the JServ , but Oracle HTTP Server doesn't work agian

my Oracle HTTP Server doesn't work after i've configured the JServ by Oracle Enterprise Manager.
when i run flowing command :
D:\oraias\dcm\bin>dcmctl getstate -v
and Error message : "ADMN-100999 Base Exception:
java.lang.ClassCastException:java.lang.Boolean" has shown.
and i navigate Enterprise Manager web site these Error Message showing:
"Your browser or operating system is not a supported client configuration for this version of Enterprise Manager. Using Enterprise Manager with your current client configuration may result in incorrect display of data or incorrect updates to configuration settings. See the release notes for information on supported client configurations. Root Cause: java.lang.Boolean. java.lang.Boolean"
how can i do? please help me.
THX

The key message -
mod_plsql: /pls/htmldb/htmldb_login HTTP-503 ORA-12541
Looking up that error gives -
[jes@spdb1 ~]$ oerr ora 12541
12541, 00000, "TNS:no listener"
// *Cause: The connection request could not be completed because the listener
// is not running.
// *Action: Ensure that the supplied destination address matches one of
// the addresses used by the listener - compare the TNSNAMES.ORA entry with
// the appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to
// go by way of an Interchange). Start the listener on the remote machine.So it looks like the listener isn't running for your database to me (i.e. "lsnrctl start")

Desgin browser: Invalid HTTP server information

Similar Messages

Maybe you are looking for