Design for Hosted SCCM
Thinking about setting up an hosted SCCM 2012 with no trusts.
What would be the limitations? What site server roles are not available in this scenario?
How about Application Catalog?
What ports are needed to be open for SCCM to be able to discover the AD off the other forests/domains?
Planning for Communications Across Forests in Configuration Manager
http://technet.microsoft.com/en-us/library/gg712701.aspx#Plan_Com_X_Forest
Technical Reference for Ports Used in Configuration Manager
http://technet.microsoft.com/en-us/library/hh427328.aspx
Torsten Meringer | http://www.mssccmfaq.de
Similar Messages
-
Why am I getting a "Adobe Creative Cloud Membership has reached its limit for hosted sites" message?
I just tried to push my FIRST "free" Creative Cloud site live and got the message "Your Adobe Creative Cloud Membership has reached its limit for hosted sites. To push this site live you will need to purchase an additional hosting plan." I thought CC membership was supposed to give you 5 free hosted web basics sites?
I am a premium BC partner and so far have my partner site and a paid Webcommerce site . In addition to the site I'm trying to put live I have 2 other trial sites (think they are designated as WebMarketing sites) of which one is expired. So where does the limit come in as this is so far my only WebBasics site?
Please help as I need this live urgently (without additional expense).Hi Judy
Appologies for this un-answered post, if any related issue is still active please reach out to our support directly. -
Issue with cisco ONS 15310. Slot with Ethernet ports, designed for bridging.
Hi, guys. I’ve got an issue with cisco ONS 15310 sdh optical network. I’ve got a special slot with Ethernet ports, designed for bridging. Assume, we’ve got to multiplexers, named A and B with ports A0 and B0 respectively. The ios console of these slots says, the configuration is as follows:
no ip address set on these ports
Ports are administratively up
Auto mdix
Bridge groups are the same on these ports.
Dot1q tunnel.
I’m trying to monitor a device with an ip-address connected to port B0. It answers ping if I connect the notebook directly to a device. But if I connect the notebook to port A0 and ping the device pluged in port B0 through the optical network, it doesn’t answer. I tried connections with straight and cross cable.
Guys, who set the network said, it should work as a point to point bridge with no extra configuration. But it doesn’t. I used wireshark sniffer to lookup what’s happening on port A0. All I see is cdp-s from port A0 and self-announcements of the notebook.
Any suggestions? Thank you in advance.B
Building configuration...
Current configuration : 3712 bytes
! Last configuration change at
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname B
boot-start-marker
boot-end-marker
enable password -
clock timezone -
ip subnet-zero
no ip domain-lookup
no mpls traffic-eng auto-bw timers frequency 0
bridge 100 protocol ieee
bridge 140 protocol ieee
bridge 141 protocol ieee
bridge 142 protocol ieee
bridge 143 protocol ieee
bridge 144 protocol ieee
interface Loopback0
ip address 192.x.0.x 255.255.255.255
interface FastEthernet0
description -
no ip address
mode dot1q-tunnel
bridge-group 140
bridge-group 140 spanning-disabled
interface FastEthernet1
description --- B0 ---
no ip address
mode dot1q-tunnel
bridge-group 141
bridge-group 141 spanning-disabled
interface FastEthernet2
description -
no ip address
mode dot1q-tunnel
bridge-group 142
bridge-group 142 spanning-disabled
interface FastEthernet3
description -
no ip address
mode dot1q-tunnel
bridge-group 143
bridge-group 143 spanning-disabled
interface FastEthernet4
description -
no ip address
mode dot1q-tunnel
bridge-group 144
bridge-group 144 spanning-disabled
interface FastEthernet5
no ip address
shutdown
interface FastEthernet6
no ip address
shutdown
interface FastEthernet7
description -
no ip address
shutdown
mode dot1q-tunnel
bridge-group 100
bridge-group 100 spanning-disabled
interface POS0
description -
no ip address
crc 32
interface POS0.1
encapsulation dot1Q 141
no snmp trap link-status
bridge-group 141
interface POS0.2
encapsulation dot1Q 142
no snmp trap link-status
bridge-group 142
interface POS0.3
encapsulation dot1Q 143
no snmp trap link-status
bridge-group 143
interface POS0.4
encapsulation dot1Q 144
no snmp trap link-status
bridge-group 144
interface POS0.5
description -
encapsulation dot1Q 140
no snmp trap link-status
bridge-group 140
interface POS1
no ip address
crc 32
interface POS1.1
encapsulation dot1Q 100
no snmp trap link-status
bridge-group 100
router ospf 100
log-adjacency-changes
network 192.x.0.x 0.0.0.0 area 0
ip default-gateway [x.x.x.x]
ip classless
no ip http server
snmp-server community public RO
snmp-server ifindex persist
snmp-server trap link ietf
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps config
snmp-server enable traps cpu threshold
snmp-server enable traps entity
snmp-server enable traps syslog
snmp-server enable traps hsrp
snmp-server enable traps config-copy
snmp-server enable traps bridge
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps bgp
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps ipmulticast
snmp-server enable traps rtr
snmp-server enable traps mpls traffic-eng
snmp-server enable traps mpls ldp
snmp-server enable traps rsvp
snmp-server enable traps l2tun session
snmp-server enable traps mpls vpn
snmp-server host x.x.x.x public
control-plane
line con 0
line vty 0 4
password -
logging synchronous level 4
login
end -
I really just need some advice. I'm an atrist/musician/DJ, self employed. Origonally I had found iWeb and really enjoyed it's simplicity and how user friendly it was. I was still content with iWeb as it was free and incredibly easy to post and update from. Now that it is gone, I am at a bit of a loss. What is the best way to redesign a website as a beginner?
I already pay for hosting and have a temp site up so I would really not want to use any third party design website. I want my files and everything organized on my HD not on a server. I have the entire adobe creative suite; according to people I should use every single one of these programs, but I'm having trouble finding a consistent opinion as to what to do with all that Adobe software.
Everryone seems to favor their own adobe solution but no one seems to agree. Which program (or combination of programs) would be best for a novice in web design?I have wordpress, I still have the last version of iweb. I just don't know where to begin or what programs to use. I can read a (very) small amount of HTML and CSS; definitely willing to learn more as I am by no means proficient. But I would like something that would allow me to quickly get my site at least up and running in a few hours but with the potential for more intricate animations and design elements later. Getting back to having an active site is priority, but really any guidance with this would be much appreciated.
Thanks!!!I'm somewhat in the same boat - I'm just two months into learning web design (I have over 30 years of experience in print design) and have the Adobe Creative Cloud membership - everything at my disposal. I started out with Dreamweaver (using the Adobe CIB series) as well as a book teaching HTML5, CSS3 and JavaScript - this book from Amazon.
I've found that there are no shortcuts to learning web design. Two months into it and I can only create the most basic of sites. I've not yet touched Adobe Muse, just continuing on with learning more about the languages, etc., using, primarily, Dreamweaver.
There are a number of WYSISYG 'editors' out there, but to me they do a poor job of actually teaching web design. So my suggestion is to start with Dreamweaver, using the CIB book for it, and buying the book that I link to - it's great.
Good luck,
Clinton -
SQL server 2012 with SP2 for hosting VMM 2012 R2 DB server
Hi,
I would like to implement System Center 2012 R2 Operation Manager, VMM and Configuration Manager.
I have proposed to my customer two MSSQL Server 2012 Box, one for SCOM/VMM DB server and another one for SCCM (SCCM DB and SCVMM DB cannot be on the same computer).
But I read on Microsoft web site that only SQL Server 2012 SP1 are supported for VMM DB server and SQL Server 2012 SP2 is supported for SCOM DB server.
So my question is: Can I deploy one box SQL server 2012 with SP2 for hosting VMM 2012 R2 DB server ? if not, When SQL Server 2012 SP2 will be supported for VMM 2012 R2 DB server ?
Regards.
BrahimH.
BrahimHHi,
As per the link this seems to me a known issue. I cannot 100 % say because I have seen/faced this issue with
SP1 and you mentioned SP2. I would always suggest to install RTM only there is option to un select SP2 during installing.
Well thank you for reporting I guess Microsoft would take this as feedback.
Can you share setup log files please just for analysis
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Design for redundancy of access switch
hello all,
I have the following design for a site:
Provider delivers channel with HSRP redundant routers, but access level in not redundant and represented by one switch.
Am I correct that there is no way no provide redundancy on access level only with access switches or there are any design proposals?!Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
As Reza describes, many hosts only have a single connection to network, so that single connection is always a possible point of failure. But there's a couple of things you can do to minimize the impact of a network infrastructure device failure.
When working with small appliance type switches, you might have multiple smaller switches rather than one large switch. For example, instead of having one 48 port switch, you might have two 24 ports switches, or six 8 port switches, etc.. If a switch fails, not all hosts lose connectivity.
You can also have additional ports, ideally enough to handle lost of any one unit of hardware, So, for example, if you have seven 8 port switches, when you only need 48 ports, if a switch fails, you only lose 1/7 of your hosts until they can be repatched into available ports on the other switches.
If some of your hosts have multiple NICs, then there are various method to use the two NICs to avoid a single network unit failure from dropping the host. Usually only shared servers merit that level of redundancy. -
Design for "featured providers"
I don't know what the feature is called but when you click in the itunes store on podcast and then on "featured providers" then you can see that big podcast providers with more than one podcast seem to have their own "chapter" "section" or whatever it is called. (so what is it called?). Just take a look at BBC for example. It is defined by a distinct design with a huge space on top with their logo and image material and a text block. Further down you have a box with all their podcasts.
My question is: how do I provide a design for this. Where do I upload the background design files and when, do I do that when I register the podcasts? Can anyone tell me how this feature is called at all? I have noticed that providers that aren't even on the "featured providers" list have their own chapters.Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
As Reza describes, many hosts only have a single connection to network, so that single connection is always a possible point of failure. But there's a couple of things you can do to minimize the impact of a network infrastructure device failure.
When working with small appliance type switches, you might have multiple smaller switches rather than one large switch. For example, instead of having one 48 port switch, you might have two 24 ports switches, or six 8 port switches, etc.. If a switch fails, not all hosts lose connectivity.
You can also have additional ports, ideally enough to handle lost of any one unit of hardware, So, for example, if you have seven 8 port switches, when you only need 48 ports, if a switch fails, you only lose 1/7 of your hosts until they can be repatched into available ports on the other switches.
If some of your hosts have multiple NICs, then there are various method to use the two NICs to avoid a single network unit failure from dropping the host. Usually only shared servers merit that level of redundancy. -
I am asking this because I want the G-Tech Hard drive says that it is designed for the macbook pro. Yet, I want to back up faster with by using my firewire 400 which is not an option on the one designed for the white macbook that does not have a firewire (only a USB port.) The G-Tech Hard drive comes with the 800 to 400 compatible cable and has 5400 RPM with 750 GB. Also, I've heard that laptops with low battery (mine all the time) won't have the power for a bus powered Hard drive (as in no ac plug in adaptor.) Can I just plug in my laptop? Any one know the answers from experience with this hard drive?
As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first. -
I am asking for feedback on this design. Here is an example user story:
As a group admin on the website I want to be notified when a user in my group uploads a file to the group.
Easiest solution would be that in the code handling the upload, we just directly create an email message in there and send it. However, this seems like it isn't really the appropriate level of separation of concerns, so instead we are thinking to have a separate
worker process which does nothing but send notifications. So, the website in the upload code handles receiving the file, extracting some metadata from it (like filename) and writing this to the database. As soon as it is done handling the file upload it then
does two things: Writes the details of the notification to be sent (such as subject, filename, etc...) to a dedicated "notification" table and also creates a message in a queue which the notification sending worker process monitors. The entire sequence
is shown in the diagram below.
My questions are: Do you see any drawbacks in this design? Is there a better design? The team wants to use Azure Worker Roles, Queues and Table storage. Is it the right call to use these components or is this design unnecessarily complex? Quality attribute
requirements are that it is easy to code, easy to maintain, easy to debug at runtime, auditable (history is available of when notifications were sent, etc...), monitor-able. Any other quality attributes you think we should be designing for?
More info:
We are creating a cloud application (in Azure) in which there are at least 2 components. The first is the "source" component (for example a UI / website) in which some action happens or some condition is met that triggers a second component or "worker"
to perform some job. These jobs have details or metadata associated with them which we plan to store in Azure Table Storage. Here is the pattern we are considering:
Steps:
Condition for job met.
Source writes job details to table.
Source puts job in queue.
Asynchronously:
Worker accepts job from queue.
Worker Records DateTimeStarted in table.
Queue marks job marked as "in progress".
Worker performs job.
Worker updates table with details (including DateTimeCompleted).
Worker reports completion to queue.
Job deleted from queue.
Please comment and let me know if I have this right, or if there is some better pattern. For example sake, consider the work to be "sending a notification" such as an email whose template fields are filled from the "details" mentioned in
the pattern.Hi,
Thanks for your posting.
This development mode can exclude some errors, such as the file upload complete at the same time... from my experience, this is a good choice to achieve the goal.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
Can we design report with print layout designer for UDO forms?
If yes, how do we accomplish this?
If not, is there any other alternative?
I am using 2004B. Thanks.I use the iTextSharp project to create PDF's (http://itextsharp.sourceforge.net/)... its free and it works (A little hard to use, but it works). A more simple PDF-project are SharpPDF (http://sharppdf.sourceforge.net/). This is also free and very easy to use, but not that many features.
-
How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?
If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards -
Creative Cloud Membership has reached its limit for hosted sites
I have had a paid Adobe Muse Creative Cloud membership for about 2 years now, and only used one website. I understand I can host up to 5. But for some reason when I try to launch a new site, I am told my membership has reached its limit for hosted sites. Can someone please tell me if I have some test pages I'm hosting (or something) and how I can erase them so I can make room for my new site. These are only personal sites so I do not need a business catalyst url for testing. I have the two domains active now and just need to be able to have both go live.
My email is [email protected]
The web page I'm trying to launch is www.ninetiesband.com. The only site that should be active right now is www.wearenightsbridge.com.
Thank you for any help you can provide.
-MickeyHello Mickey,
I checked your subscription details, and it looks like you're subscribed to Adobe Muse single app subscription, and not Creative Cloud subscription. When you sign up for Muse single app subscription (yearly), you get one free site to host with Business Catalyst. You only get 5 sites when you have a full Creative cloud subscription.
Cheers
Parikshit -
Getting error while publishing workflow using SP designer for SharePoint 2013
Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
This workflow cannot be imported because it was created in SharePoint Designer for a different Site
Hello everyone. I am getting this error when attempting to move minor workflow changes from mirror SharePoint development / production environments and hoping someone can help me.
"This workflow cannot be imported because it was created in SharePoint Designer for a different site, or the original workflow has been moved or deleted. To move a workflow between sites, use Save as Template (.wsp file) instead of a Visio workflow
drawing."
So basically I have taken an image of our single SharePoint server, Domain Controller, and a client and restored them to an OFFLINE development environment for the testing of workflow changes prior to production. I've put quite a bit of time into one
particularly and would like to export/import rather than re-created from scratch.
I've successfully created the form template and imported. This created the necessary list items nicely and the form appears to work as expected. However, when attempting to import the .VWI file exported from dev SharePoint, I am getting the above
error. If I change the .VWI to .zip and remove the "workflow.xoml.wfconfig.xml" file, then re-zip and change the file extension back to .VWI I get a dialog that allows me to import, but I have to choose a new name and much of the related content
is lost. I need to be able to overwrite/merge the existing workflow with the import. Any suggestions?
One strange thing I ran into was during a test of an export/import from and to the exact same environment. If I simply export to .VWI, then import from .VWI with no changes, SAME everything I still get this error. Very weird. Hoping someone can shed some
light on the subject. Thank you.
Adam TylerHi Adam,
Here is a blog talk about the same issue would be helpful:
http://techiescode.blogspot.com/2014/09/copymove-sharepoint-2010-designer.html
Best Regards
Dennis Guo
TechNet Community Support -
I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014
I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.
Maybe you are looking for
-
The wifi option on my iPhone 3GS is greyed out, what do I do?
I need an answer quickly as tomorrow I am travelling and I put my phone in the washing machine by mistake, I needed a replacement phone quickly so I only had a iPhone 3GS as a spare phone. I set it up and wiped it's Setting and Contents, when I did I
-
Keep getting "Account Locked" message every time I try to access iTunes.
Every time I attempt to access iTunes from my iPod Touch, I get a box popup telling me my account has been locked. This is getting really annoying. I have a Droid 2 and never have account problems like this. What is up with Apples ignorance on this
-
I use the tab slideshow add-on because I need to see many "sites" to monitor activities so the slideshow provides that at this time. When I saw the tab group feature, I wanted to try that because that would allow me to see all the sites on one page.
-
Failed to create a temporary file in directory C:\PROGRA~2\: Method GetTempFileName
I have Mcafee anti-virus and currently purchased a new package, so I decided to reinstall the software as it would not verify through the other product package. So I unistalled and tried to reinstall the software and now everytime I try to install an
-
HP PSC 1350 All-In-One won't install on Macbook Pro, PLEASE HELP!! :(
Hi all I know this has been covered before, but I've done SO many Google searches I just can't think of any other keyword combinations so I'm hoping someone can advise. I'm running the latest version of OS X, and when I first plugged in the printer v