Design has no fields to display, but preview display blanks

I have deleted every field from the design window, and when i refresh the preview window behaves as is there are fields to
display, i.e 9330 records/213 pages. but no data is displayed
field explorer shows many "checked fields", yet report explorer does not show any fields ?
how do i find these fields that preview thinks are still on the report, why are they checked ?

Hi John,
First of all what version of Crystal Reports are you using?
What version of Crystal Reports was this report created in?
I've run into this as well and pulled my hair out a couple of times so I know your frustration.
If you have Crystal 2008, search for the field in all formulas as I mentioned before. The formula may be used in a conditional or formatting formula that isn't in the Field Explorer. The search will check the entire report, including formatting and conditional formulas.
You can also go to export the report to Report Definition. This will create a text file with a verbose description of all objects in the report. It will list all the sections and what objects are in them.
Good luck,
Brian
Edited by: Brian Dong on Sep 16, 2010 8:25 PM

Similar Messages

Transactions TBB1 TPM44 - the portfolio field is displayed blanked

Hi Gurus.
We are using the portfolio field on our financial transactions created through FTR_CREATE. However, when we analyze the output reports of TPM44, TBB1 transactions the portfolio field is displayed blanked.
Has anyone faced this situation?
Thanks in advance for your help.
Regards,
ZucoGuti.

HI ZucoGuti,
portfolio field in TBB4 and TPM44 is for portfolio used in position determination and will only be displayed, if it is used as differentiation criterium. The same is valid for reports like TPM12 and TPM13.
BR,
Tomislav

Photos has many instances of displaying blank photos, thumbnails?

My recently setup photos library has a lot of blank images. They show a blank thumbnail and when I open it sometime a picture will load which is something I have already deleted. I am not under "show recently deleted" rather this is happening under the section "Photos" which should only be showing active items. This is a serious bug.

Thanks for this, I let it run to completion while my Mac was idle but the blank thumbnails are unchanged.
Oddly, if clicked the pic opens and if I close immediately it goes back to a blank thumbnail. However, if I open a pic and then move forward or back with either arrow keys or trackpad when minimised again the thumbnail is a pic i.e. not blank.

I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed. Is there an adapter available so that I can use it?

I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed. Is there an adapter available so that I can use it?

Welcome to the Apple Support Communities
Use the MagSafe to MagSafe 2 Converter > http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter?fnode =51 However, note that the MacBook Air doesn't provide enough energy to charge the MacBook Pro with Retina display, so it could not work

3.5 Query Designer has 'row' in the footer of results but 7.0 has 'page'

3.5 Query Designer has 'row' in the footer of results but 7.0 has 'page' is there a way to change 7.0 to have 'row' instead of 'page'? We would prefer to see how many rows of data we have. I didn't know if this was a parameter they may be able to be changed.
Thanks,
Diane

I donot think there is way to display Row instead of Page.
Also in 7.0. It is based on cells.

Hi, i am using SAP by Design in india. I am trying to get GL entry report in which i require a field "Approved by" but unable to find - please suggest.

Hi, i am using SAP by Design in india. I am trying to get GL entry report in which i require a field "Approved by" but unable to find - please suggest.

Hi hanmant,
You could find GL Line item report under General ledger WOC => Reports => List=> G/L Line Item Report, but this report does not have filter parameter "Approved by".
May I know what was the use case behind "Approved by" field?
BR, Rakesh

QA: Designer's operation to Add one more Field to display in Query Result Web Part

QUESTION ABOUT Query Result Web Part presentation +1 Field
I'd be looking at a property of Web Part to look up Discussion Board through Query Result Web Part. Currently it displays 'Title' column of Discussion Board, and my caring requirement is presentation customization to hold double
columns of 'Title'+'Updated Date'. How could I add one more field 'Updated Date' to display in addition to that preexisting 'Title' field?
Any procedural steps to realize how to add Filed to display in Query Result Web Part?

Hi Yoshihiro,
As I understand, you want to add the field to display in Query Result Web Part in SharePoint 2013.
Which web part does you use? Content query web part or search results web part?
If you use search results web part, you could edit the discussion board result template and add the updated field in the template.
You could go to Design Manager: Edit Display Templates (site setting-> look and feel->design manager->edit display template), download the Discussion Item.htm file, and edit the file.
After editing, upload the file.
The articles below are about how to modify an existing Display Template in SharePoint 2013.
http://www.learningsharepoint.com/2012/09/17/sharepoint-2013-the-new-display-templates-for-styling-your-content/
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/01/sharepoint-2013-customize-display-template-for-content-by-search-web-part-cswp-part-1.aspx
If you use content query web part, you could edit the content query web part, in the Property Mappings section select the “Change the mapping of managed”, and add the “modifiedOWSDATE” (it means the last modified date) in the line, after
that you could see the update date under the title.
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I have a form that has multiple fields but has 5 sections. I have used mail merge to insert information but I can't get Excel to recognize that I need different names and addresses for each section. Please help.

I have a form that has multiple fields but has 5 sections. I have used mail merge to insert information but I can't get Excel to recognize that I need different names and addresses for each section. Please help.

Thanks for your response. I do believe I have the information needed for each form on a separate line in Excel. There is a first name, middle name, last name, city, and zip column. And field is entered on a different line for all the information. I'm really stuck.

Field not displaying in ALV but going in column-set...

Hello Gurus,
I am facing a strange issue in ALV. I am specifying the column position when I create the field list.
But when I execute the ALV, that field goes out of ALV. I have to goto ALV layout setting to move that feild from column set to be dispalyed on ALV. I am not sure why this is happening ? Can someone please help ?
Regards,
Tushar.

Hi, Please check the how the fieldcatalouge is built.
Also check whether there is any default layout assigned in alv layout management.

Designer refuses to use Acrobat Pro for Preview

every now and then, Designer (9.002) stops using Acrobat Pro as its preview engine and wants to use Acrobat Reader. I have no idea what causes this. So when you try to preview your document, Designer tries to launch a thread using AcroRd32.exe and since Acrobat.exe is running, it refuses to display anything.
This means you cant use the JavaScript debugger in Acrobat Pro to debug your scripts.
This is getting incredibly frustrating because there doesnt seem to be a way to tell Designer to play nicely with Acrobat Pro again.
I'm running Windows 7 64-bit, but this has been working for a while now and only does this sometimes.
Anyone else getting this or know how to fix it?

Well it seems that you can actually (or used to be able to) debug Acrobat JavaScript from within Designer itself using Acrobat Pro as the Preview renderer. As it actually spawns a real instance of Acrobat.exe, the JavaScript editor can be brought up during Preview mode (or used to be able to)
I have noticed the Debugger blink up a window that disappears whenever I deliberately force an exception.
Now my question is: Is this a known bug (Adobe?) and if so when is a likely fix going to be released? Or has one?
If it is NOT a bug, then how can I report it as a bug (Adobe?)
LC Designer 9 SP2 / Acrobat Pro 9.4.1 / Windows 7 x64

Custom fields not display in SRM5.5 Basic Data Frame

Hello Everybody,
      I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
     No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
    I added these fields by help of 672960 OSS notes..
   Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.

Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance...

Custom module pool + Amount field decimals display same as standard screen display

Hi All,
Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
Both the data elements have 2 decimal places.
For currency USD two decimal places are displayed - in TCURX - decimal places are two.
For currency JPY or CLP - zero decimal places are displayed - in TCURX - decimal places are zero.
i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
I would like to know how this is happening on standard screen fields.
Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
I would like to get a solution for this one.
Thanks in advance.
Goutham.

Thank you all for taking time to take a look at this query.
This issue has been resolved.
Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
Do repond to this thread if the resolution is not clear.
Thank you all once again.
Goutham.

CR on BW Query : Query fields not displayed properly

Hi Experts,
I am using Crystal reports 2008 with SAP Integration Kit for BO Enterprise XI 3.0
I want to create a CR based on SAP BI 7.0 Query. But I add BI query as a datasource from SAP BW Query, it doesn't bring in all the fields correctly.
All the Characteristics are displayed as D~ [0sold-to]~ K or D~ [0Material] ~K
All KFs are displayed as M~ [Measures].[D4NXLFXS1ULO50FAO05ZCM9DN] ~ M or M ~ [Measures].[D4NXLFXS1ULO50FAO05ZCM9DN] ~ U
Please help me how to see the proper description of Char or KF?
Thanks,
Smruti
Edited by: Smruti Pattani on Dec 11, 2008 8:12 PM

Hi,
I built a Crystal Report on BI query using SAP BW MDX Query.I have Crystal Reports 2008 and BO Integration kit for sap XI 3.1. I am able to bring in all the query fields into report but when i try to see preview, system fails to retrieve data and it gives me error
Database Connector Error: "BAPI Error # :0"
Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Please help me how to resolve this issue.
Thanks,
Smruti

How to compare two currency form fields and display a message if the fields do not equal?

My form has 2 fields named Total_1 and Total_2. If one of the fields does not equal the other, a hidden field will display a message in red on the form alerting the user. Otherwise, the message does not display. Looks like a validation script but I would greatly appreciate help in getting it started. Any ideas?
Thanks, Charlie
charlie6067

Since the field values that you want to compare are the results of calculations, you should not normally compare their string values, but rather their numeric values when rounded appropriately (and perhaps then converted to a string). For example, if you have two values that display as 3.14, one could be 3.1400000001 and the other could be 3.13999999999991234. When you get the field values as strings and compare them, they won't be equal though they appear to be. Even some values that are numerically identical won't be equal when compared as strings ("0.0" != "0.00") So the code could be changed to:
// Get the two field values, rounded to two decimals
var v1 = util.printf("%.2f", getField("Total_1").value);
var v2 = util.printf("%.2f", getField("Total_2").value);
// Hide/Show the error message
event.value = (v1 === v2 || (+v1 === 0 && +v2 === 0)) ? "" : "Error message here.";

Mail merge fields not displaying properly - Dollar signs and percentages

Hi folks,
I don't know much about mail merging, so I have a question. I have most things working on my merge, but need help with a couple of minor items (I hope). I have an Excel 2010 spreadsheet that we use for merging to a Word 2010 document.
It has various fields such as name, address, city, etc. It also has a field for a dollar amount formatted to two decimal places and showing the $ sign in Excel (ex. $67,000.00), but when it gets merged into the Word document, it displays as 67000.
It doesn't pull the $ nor the decimal point and cents.
I also have the same thing with a percentage (Ex. 6.00%), displays in the Word document as .006.
I think I have everything else working, but can't figure out how to format these items in the Word document to display properly. Any advice?
Mike

If you insert the fields
{ MERGEFIELD Total_NB_Premium_away_from_Plan }
and
{ MERGEFIELD Total_Premium_of_Team_Sales_Target }
directly in your mail merge main document, outside an IF field, not nested in an { = } field, with no formatting switches, what results do you see?
Word will only apply a numeric format to things that it decides are numeric (broadly speaking, that includes numeric and currency amounts that it can recognise). It will leave anything else unformatted. So if you have something that looks a bit like a number
like "$-164,209.00", the chances are that Word will leave it exactly as it is.
When Word does not recognise something as being a number or a valid numeric expression, it will generally display one error or another when you try to put it in an { = } field. So, e.g.
{ =$-164,209.00 } would give you the syntax error that you are seeing. (Assuming "$" is set up as the currency symbol in your COntrol Panel's regional options. If the regional currency symbol was £, you would see a different syntax error.)
The problem in this case probably originates in something that has happened in Excel. Normally, things that are numeric/currency in Excel come through as things that Word treats as numeric. But if for example, someone has entered a number formatted as text
in a column that has texts rather than numbers above it, Word may receive something that it does not think is numeric. You may have to fix your sheet before Word will "see" the numbers correctly.
When you have got to the point where WOrd sees the numbers correctly, you should be able to use
{ MERGEFIELD
Total_NB_Premium_away_from_Plan} \#$,0.00 }
(and the negative numbering formats if you want) without nesting the { MERGEFIELD } inside an { = }
Peter Jamieson

Design has no fields to display, but preview display blanks

Similar Messages

Maybe you are looking for