Designer generating CG_REF_CODES inserts without the table name.

We have upgraded our repository from 9i to 10g and now when we generate DDL we get our insert statements for the CG_REF_CODES table without a table name. I am sure that this must be a setting somewhere but I can't find any reference to it in the help. The following is an example of the generated .avt file from our 10g installation.
Thanks in advance,
Chris S.
DELETE FROM
WHERE RV_DOMAIN = 'DURATION_VALUE'
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'D', NULL, 'Days', 'Days')
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'M', NULL, 'Months', 'Months')
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'Y', NULL, 'Years', 'Years')
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'B', NULL, 'Business Days', 'Business Days')
INSERT INTO (RV_DOMAIN, RV_LOW_VALUE, RV_HIGH_VALUE, RV_ABBREVIATION, RV_MEANING)
VALUES ('DURATION_VALUE', 'I', NULL, 'Indefinite', 'Indefinite')
COMMIT
/

Sounds like a bug to me, but one thing you can check is the generator options that affect the reference code table. In the Design Editor select your application in the navigator, then the Options menu. Select "Generator Options...", then "General..."
One thing you might fool with is the File Name Length restriction - mine is blank, but then I tend not to use CG_REF_CODES, so I haven't generated them for quite a while. Try setting it to 30, which would be the right number for Oracle, or to 0, which is supposed to mean "no restriction".

Similar Messages

How to get the table name and bind columns names in an INSERT statement ?

I have an INSERT statement with input parameters (for example
INSERT INTO my_table VALUES (:a, :a, :a)) and I want to know
without parsing the statement which is the name of table to
insert to and the corresponding columns.
This is needed to generate the SELECT FOR UPDATE statement to
refetch a BLOB before actually writing to it. The code does not
know in advance the schema (generic code).
Thanks in advance,
Joseph Canedo

Once you have prepared your statement, you can execute the
statement with the OCI_DESCRIBE_ONLY mode before binding any
columns. Then you can use OCIParamGet to find out about each
column (column index is 1-based). You should get OCI_NO_DATA or
ORA-24334 if there are no more columns in the statement. Note
that the parameter descriptor from OCIParamGet is
allocated/freed internally by OCI; you do not need to manage it
explicitly. The parameter descriptor is passed to OCIAttrGet in
order to obtain for instance the maximum size of data in the
column OCI_ATTR_DATA_SIZE. You can also get the column name in
this way, although I do not remember the #define off the top of
my head. Getting the table name appears to be much more
difficult; I have never had to do that yet. Good luck. -Ralph

How to get the table name in the trigger definition without hard coding.

CREATE TRIGGER db.mytablename
AFTER UPDATE,INSERT
AS
    INSERT INTO table1(col1)
    SELECT InsRec.col1
    FROM
    INSERTED Ins
   --Below i am calling one sp for which i have to pass the table name
   EXEC myspname 'tablename'
In the above trigger,presently i am hard coding the tablename
but is it possible to get the table name dynamically on which the trigger is defined in order to avoid hard coding the table name

I really liked your audit table concept. You inspired me to modify it so that, the entire recordset gets captured and added a couple of other fields. Wanted to share my end result.
USE [YourDB]
GO
/****** Object: Trigger [dbo].[iudt_AutoAuditChanges] Script Date: 10/18/2013 12:49:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER TRIGGER [dbo].[iudt_AutoAuditChanges]
ON [dbo].[YourTable]
AFTER INSERT,DELETE,UPDATE
AS
BEGIN
SET NOCOUNT ON;
Declare @v_AuditID bigint
IF OBJECT_ID('dbo.AutoAudit','U') IS NULL BEGIN
CREATE TABLE [dbo].[AutoAudit]
( [AuditID] bigint identity,
[AuditDate] DateTime,
[AuditUserName] varchar(128),
[TableName] varchar(128) NULL,
[OldContent] XML NULL,
[NewContent] XML NULL
ALTER TABLE dbo.AutoAudit ADD CONSTRAINT
PK_AutoAudit PRIMARY KEY CLUSTERED
[AuditID]
) WITH( STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
CREATE NONCLUSTERED INDEX [idx_AutoAudit_TableName_AuditDate] ON [dbo].[AutoAudit]
( [TableName] ASC,
[AuditDate] ASC
)WITH (STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
END
Select * Into #AuditDeleted from deleted
Select * Into #AuditInserted from inserted
While (Select COUNT(*) from #AuditDeleted) > 0 OR (Select COUNT(*) from #AuditInserted) > 0
Begin
INSERT INTO [dbo].[AutoAudit]
( [AuditDate], [AuditUserName], [TableName], [OldContent], [NewContent])
SELECT
GETDATE(),
SUSER_NAME(),
[TableName]=object_name([parent_obj]),
[OldContent]=CAST((SELECT TOP 1 * FROM #AuditDeleted D FOR XML RAW) AS XML),
[NewContent]=CAST((SELECT TOP 1 * FROM #AuditInserted I FOR XML RAW) AS XML)
FROM sysobjects
WHERE
[xtype] = 'tr'
and [name] = OBJECT_NAME(@@PROCID)
Set @v_AuditID = SCOPE_IDENTITY()
Delete from AutoAudit
Where AuditID = @v_AuditID
AND Convert(varchar(max),oldContent) = Convert(varchar(max),NewContent)
Delete top(1) from #AuditDeleted
Delete top(1) from #AuditInserted
End
END

How to pass the table name dynamically in xml parsing

Hi All,
I have created one procedure for parsing xml file which is working perfectly.
FORALL i IN t_tab.first .. t_tab.last
         INSERT INTO Test_AP VALUES t_tab(i);Now I want to put the table name dynamically+. For that I have added one query and modify above code as follow:-
I have already declare dml_str varchar2(800) in declaration part.
Query is as follows:-
select table_name into tab_name from VERSION_DETAILS where SUBVERSION_NO=abc; -- here abc is variable name which contains values.
FORALL i IN t_tab.first .. t_tab.last
          dml_str := 'INSERT INTO ' || tab_name || ' values :vals';
          EXECUTE IMMEDIATE dml_str USING t_tab(i);But it's not working. How I will resolve this or through which way I achieved the intended results. Anyone can guide me on this matter.
Thanks in advance for your help...

Hi,
But it's not working.Don't you think it would help to give the error message?
Put the assignment before FORALL.
FORALL only accepts one subsequent DML statement (static or dynamic SQL) :
dml_str := 'INSERT INTO ' || tab_name || ' values :vals';
FORALL i IN t_tab.first .. t_tab.last
EXECUTE IMMEDIATE dml_str USING t_tab(i);

Creating a Mat View having the same name with that of the table name

Hi everyone,
After dropping the mat view name "QQ.TRDLN_DIM_MV", I'm trying to re-create it by having the same name as that of the table but I got an error stating that "name is already used by an existing object". How can create a mat view to look like the object owned by schema "GQ", having a name that is the same as that of the table name, without dropping the table?
OWNER_O OBJECT_TYPE CREATED LAST_DDL_ TIMESTAMP STATUS OBJECT_NAME
===
GQ MATERIALIZED VIEW 05-NOV-08 13-DEC-08 2008-11-05:06:31:46 VALID TRDLN_DIM_MV
GQ TABLE 05-NOV-08 15-DEC-08 2008-11-05:06:31:00 VALID TRDLN_DIM_MV
QQ TABLE 17-AUG-07 16-MAR-09 2007-08-17:17:05:21 VALID TRDLN_DIM_MV
SQL>CREATE MATERIALIZED VIEW QQ.TRDLN_DIM_MV
2 TABLESPACE FPLC01S
3 NOCACHE
4 NOLOGGING
5 COMPRESS
6 PARALLEL ( DEGREE 2 INSTANCES 1 )
7 BUILD IMMEDIATE
8 REFRESH FORCE ON DEMAND
9 WITH PRIMARY KEY
10 AS
11 select /*+ NO_REWRITE */ trdln_id,
12 trdln_skid,
13 trdln_end_date,
14 first_value(trdln_end_date) over (partition by trdln_id order by trdln_end_date DESC) as MaxDate
15 from QQ.trdln_dim;
from QQ.trdln_dim
ERROR at line 15:
ORA-00955: name is already used by an existing object
I appreciate your help. Many thanks in advance!
Regards,
Radic

You'd have to rename the table (using ALTER TABLE tablename RENAME TO othername; ) before you create the MV.
You can't have both existing with the same name in the same schema.
What you see in the GQ schema is that the "table" is the underlying table for the Materialized View.
When you do a CREATE MATERIALIZED VIEW MY_MV AS ...
Oracle creates two objects with the same name, one being the Materialized View MY_MV and the other being the table MY_MV which is the physical storage. {Remember that a Materialized View is a means of getting a physical representation of a View}.
In the QQ schema what you have is either
a. a real Table
or
b. an improperly dropped MV, resulting in the underlying Table still present.

How can I insert in the table detail of a master/detail form??

Hello, I have created a master/detail form from the assistant, and with the code generated by APEX I do not manage to insert a row in the table detail, I press the button 'Add Row' and refill information, when I press the button ' to apply changes ' me the following mistake appears:
'Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "C85B64D53C8D63E9D3EE83B82728DFA3", item checksum = "244B1FED90DF5CC5B0DDB6728F4D02DD"., update "CRM_ADMIN"."ASIGNACIONES_AM_CONTACTOS" set "SECUENCIA" = :b1, "CODIGO" = :b2, "NOMBRE_CLIENTE" = :b3, "NOMBRE" = :b4, "COMENTARIOS" = :b5, "CODIGO_COMERCIAL" = :b6'
How I can solve and be able to insert in the table it detail?
Thanks

Hi Law,
Text in a shape or a text box will not feature in the table of contents.
To get a colour behind your titles, type them into your document (not a shape). Format as Heading or some other paragraph style the TOC will recognise.
Select the title text and Format Panel > Text > Font > Gearwheel > Advanced Options.
Choose Character Fill Color and choose a colour from the palette (left) or colour circle (right).
Example Titles (all on the same page for a smaller screen shot).
Chapter 3 (in a coloured Text Box or Shape) does not appear in the TOC:
Hint for cheats :
To give the titles a wider Character Fill Colour, add some Tab characters before and after.
Regards,
Ian.

Can the table name in a cursor be parameterized?

I would like to do the following in pl/sql
Procedure my_proc ( varchar2 table_name) is
CURSOR my_cursor ( table_name VARCHAR2 ) IS SELECT some_column FROM table_name ;
i.e. parameterize the table name. I know it is possible to parameterize the SELECT cause by doing the above but, as written, my example will not compile. So, I'm wondering if it is even possible to create a cursor like this.
Thanks for any help/advice,
-=beeky

I wanted to add that I have no control over the database design. The reason I want to parameterize a cursor is to allow a single procedure to do exactly the same thing to six tables. These tables contain data for different geographic regions and are supplied by an outside party. My script essentially merges these tables into our relational model.
Thanks again to all who replied,
-=beeky

Select data from all the table names in the view

Hi,
"I have some tables with names T_SRI_MMYYYY in my database.
I created a view ,Say "Summary_View" for all the table names
with "T_SRI_%".
Now i want to select data from all the tables in the view
Summary_View.
How can i do that ? Please throw some light on the same?
Thanks and Regards
Srinivas Chebolu

Srinivas,
There are a couple of things that I am unsure of here.
Firstly, does your view definition say something like ...
Select ...
From "T_SRI_%"
If so, it is not valid. Oracle won't allow this.
The second thing is that your naming convention for the
tables suggests to me that each table is the same except
that they store data for different time periods. This would be
a very bad design methodology. You should have a single
table with an extra column to state what period is referred to,
although you can partition it into segments for each period if
appropriate.
Apologies if i am misinterpreting your question, but perhaps
you could post your view definition and table definitions
here.

To Get all the Table Names

Hi All
I have nearly 70 procedures in my database.
I want to get all the distinct table names used in the 70 procedures.
Is it possible?
Note:
All the table names are prefixed by schema name like DEVSRC.table_name.
Please advice
Thanks
Jo

Johney wrote:
Hi VT
One doubt.
This query will give the table names of only select stmt used in the procedure
or
List of table names that are with in any DML operations inside the procedure?
Thanks
JoIt will give all the table either used in select or in any DML..
You can also check by creating a temp proc
SQL> drop procedure proc_test;
Procedure dropped.
SQL> select name, referenced_name, dependency_type from user_dependencies
2 where type = 'PROCEDURE' and referenced_type = 'TABLE' and name='PROC_TEST';
no rows selected
SQL> create or replace
2 PROCEDURE proc_test
3 IS
4 v_ID    number;
5 v_PRID number;
6 v_PRLID number;
7 v_DATERECEIVED date;
8 Cursor C1 is
9 select * from table_c;
10   BEGIN
11   open c1;
12     LOOP
13      FETCH c1 INTO v_ID,v_PRID,v_PRLID,v_DATERECEIVED;
14      EXIT WHEN c1%NOTFOUND;
15      insert into table_b values(v_ID,v_PRID,v_PRLID,v_DATERECEIVED);
16      Commit;
17     END LOOP;
18   CLOSE C1;
19   END;
20 /
Procedure created.
SQL> select name, referenced_name, dependency_type from user_dependencies
2 where type = 'PROCEDURE' and referenced_type = 'TABLE' and name='PROC_TEST';
NAME
REFERENCED_NAME                                                  DEPE
PROC_TEST
TABLE_B                                                          HARD
PROC_TEST
TABLE_C                                                          HARD
SQL> Regards
Umesh

The table name or tcode to count the number of Dimensions and Key Figures

Hi all,
Do you have an idea about the table name or tcode to count the number of Dimensions and Key Figures of an Infocube WITHOUT installing the cube from Business Content?
Thanks in adv.
Ajay

Hi,
You can't do that because there's no active table in the system for the Business Content since it hasn't been installed yet...
One thing you could do is go to the Business Content Tab, select "Infoproviders by InfoArea" on the left side, look for the Cube or DSO you want to check, right click on it and select "Display Description".
On the window that opens you'll have a list of all InfoObjects and Key Figures. You also have the option to Display it as Start Schema, where you can see the Dimensions, etc.
Hope this helps.
Luis

If Records of different list items are entered, then the data is not getting inserted in the table.

Hi Everyone,
A Very Very Happy, Fun-filled, Awesome New Year to You All.
Now coming to the discussion of my problem in Oracle Forms 6i:
I have created a form in which the data is entered & saved in the database.
CREATE TABLE MATURED_FD_DTL
ACCT_FD_NO    VARCHAR2(17 BYTE)               NOT NULL,
CUST_CODE     NUMBER(9),
FD_AMT        NUMBER(15),
FD_INT_BAL    NUMBER(15),
TDS           NUMBER(15),
CHQ_NO        NUMBER(10),
CREATED_DATE DATE,
CREATED_BY    VARCHAR2(15 BYTE),
PREV_YR_TDS   NUMBER(15),
ADD_FD_AMT    NUMBER(15),
DESCRIPTION   VARCHAR2(100 BYTE),
P_SAP_CODE    NUMBER(10),
P_TYPE        VARCHAR2(1 BYTE)
The form looks like below:
ENTER_QUERY     EXECUTE_QUERY     SAVE     CLEAR     EXIT
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
R
W
P
List Item
There are 5 push buttons namely ENTER_QUERY, EXECUTE_QUERY, SAVE, CLEAR, EXIT.
The table above is same as in the form. All the fields are text_item, except the P_TYPE which is a List_Item ( Elements in List Item are R, W & P).
The user will enter the data & save it.
So all this will get updated in the table MATURED_FD_DTL .
I am updating one column in another table named as KEC_FDACCT_MSTR.
and
I want this details to get updated in another table named as KEC_FDACCT_DTL only if the P_TYPE='P'
CREATE TABLE KEC_FDACCT_DTL
FD_SR_NO                NUMBER(8)             NOT NULL,
FD_DTL_SL_NO            NUMBER(5),
ACCT_FD_NO              VARCHAR2(17 BYTE)     NOT NULL,
FD_AMT                  NUMBER(15,2),
INT_RATE                NUMBER(15,2),
SAP_GLCODE              NUMBER(10),
CATOGY_NAME             VARCHAR2(30 BYTE),
PROCESS_YR_MON          NUMBER(6),
INT_AMT                 NUMBER(16,2),
QUTERLY_FD_AMT          NUMBER(16,2),
ITAX                    NUMBER(9,2),
MATURITY_DT             DATE,
FDR_STAUS               VARCHAR2(2 BYTE),
PAY_ACC_CODE            VARCHAR2(85 BYTE),
BANK_CODE               VARCHAR2(150 BYTE),
NET_AMOUNT_PAYABLE      NUMBER,
QUATERLY_PAY_DT         DATE,
CHEQUE_ON               VARCHAR2(150 BYTE),
CHEQUE_NUMBER           VARCHAR2(10 BYTE),
CHEQUE_DATE             DATE,
MICR_NUMBER             VARCHAR2(10 BYTE),
PAY_TYPE                VARCHAR2(3 BYTE),
ADD_INT_AMT             NUMBER(16,2),
ADD_QUTERLY_FD_AMT      NUMBER(16,2),
ADD_ITAX                NUMBER(16,2),
ECS_ADD_INT_AMT         NUMBER(16),
ECS_ADD_QUTERLY_FD_AMT NUMBER(16),
ECS_ADD_ITAX            NUMBER(16)
So for the push button 'Save' , i have put in the following code in the Trigger : WHEN BUTTON PRESSED,
BEGIN
     Commit_form;
          UPDATE KEC_FDACCT_MSTR SET PAY_STATUS='P' WHERE ACCT_FD_NO IN (SELECT ACCT_FD_NO FROM MATURED_FD_DTL);
          UPDATE MATURED_FD_DTL SET CREATED_DATE=sysdate, CREATED_BY = :GLOBAL.USER_ID WHERE ACCT_FD_NO = :acct_fd_NO;
IF :P_TYPE='P' THEN
     INSERT INTO KEC_FDACCT_DTL
          SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
               GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
               FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
               MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
               NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
          FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
     WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
COMMIT;
     MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
     MESSAGE(' ',no_acknowledge);
END;
If P_TYPE='P' , then the data must get saved in KEC_FDACCT_DTL table.
The problem what is happening is,
If i enter the details with all the records as 'P' , the record gets inserted into the table KEC_FDACCT_DTL
If i enter the details with records of 'P' and 'R' , then nothing gets inserted into the table KEC_FDACCT_DTL.
Even the records with 'P' is not getting updated.
I want the records of 'P' , to be inserted into table KEC_FDACCT_DTL, even when multiple records of all types of 'P_Type' (R, w & P) are entered.
So, can you please help me with this.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle Forms Builder 6i.

Its not working properly.
At Form_level_Trigger: POST_INSERT, I have put in the following code.
IF :P_TYPE='P'THEN
INSERT INTO KEC_FDACCT_DTL
SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
MESSAGE(' ',no_acknowledge);
It worked properly when i executed first time, but second time , in database duplicate values were stored.
Example: First I entered the following in the form & saved it.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
250398
52
50000
6000
0
600
0
45415
P
5678
int1
320107
56
100000
22478
3456
2247
0
45215
R
456
320108
87
50000
6500
0
650
0
21545
W
0
In the database, in table KEC_FDACCT_DTL, the ACCT_FD_NO:250398 with P_TYPE='P' record was inserted.
ACCT_FD_NO
P_TYPE
250398
P
But second time, when i entered the following in the form & saved.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
260189
82
50000
6000
0
600
0
45415
P
5678
interest567
120011
46
200000
44478
0
4447
0
45215
R
456
30191
86
50000
6500
0
650
0
21545
W
56
In the database, in the table KEC_FDACCT_DTL, the following rows were inserted.
ACCT_FD_NO
P_TYPE
250398
P
250398
P
260189
P
320107
R
320108
W
There was duplicate of 250398 which i dint enter in the form second time,
All the other P_TYPE was also inserted , but i want only the P_TYPE='P' to be inserted into the database.
I want only those records to be inserted into the form where P_TYPE='P' and duplicate rows must not be entered.
How do i do this???

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

Error generating report job with the task name 'FSRM_Report_Task

Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
We get the following in the event logs:
Log Name: Application
Source: SRMREPORTS
Date: 09/06/2014 08:09:55
Event ID: 752
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: FILESERVER2.curriculum.riddlesdown.local
Description:
Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SRMREPORTS" />
<EventID Qualifiers="0">752</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
<EventRecordID>42920</EventRecordID>
<Channel>Application</Channel>
<Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
<Security />
</System>
<EventData>
<Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
</Data>
</EventData>
</Event>
We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
Anybody have any ideas?

Hi,
From the error message, it failed because of "invalid argument: storagetype = '101' ".
101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
FsrmStorageModuleType enumeration
http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
If you have any feedback on our support, please send to [email protected]

How can I get the table name of a field..

Hi,
If we know the table name we can find all the fileds from it
using desc <tablename>.
But, I would like to find table name of a known field's name.
Where all these fields are storing in the database.
THanks in Advance,
Srinivasulu.

ALL_TAB_COLUMNS
rgds, APC

Is there a way to view all the table names in a certain schema?

Is there a way to view all the table names in a certain schema?

SELECT table_name FROM user_tablesThat won't do much good given this piece of information:
i am trying to finish a lab for school but i don't know what tables are in my
professor's schema. The appropriate solution is
SELECT table_name
FROM all_tables
WHERE owner = 'PROFESSOR_YAFFLE'
/This will show the names of the tables which Prof. Yaffle has granted to us.
Cheers, APC

Designer generating CG_REF_CODES inserts without the table name.

Similar Messages

Maybe you are looking for