Destination 'DefaultHTTP' either does not exist or the destination has no channels defined
Okay, I'm pretty new to Flex, so go easy on me. I had a trial of Flex Builder several months ago, but the project I was going to use it on never happened and my employer won't spring for the $250 license. Alas...
Now I have a real project for which I need to learn. It's a form that will send data to a C# app that will put that data in a text file or XML file. At this point I just have a tiny app for figuring it out. My C# app works fine and my Flex app is almost working fine except for the transferring of the data. I've attached my MXML file. When I compile and run the app and then click the Submit button, I'm told "Destination 'DefaultHTTP' either does not exist or the destination has no channels defined". Bummer. I've tried to read up on channels, but I don't understand what I'm reading very well. Where am I going wrong?
Bonus for Adobe folks: if I can figure this out, there's a stronger chance I can convince my boss that Flex Builder is a good investment.
By the way, if I change useProxy to false, I get: Error #2148: SWF file file:////WWW2/docs/dev/flex/data%5Ftest/test1.swf cannot access local resource file:////WWW2/docs/dev/flex/data%5Ftest/WriteTextFromFlex/Default.aspx. Only local-with-filesystem and trusted local SWF files may access local resources.
Jeremy
Similar Messages
-
'Destination 'orgFilterService' either does not exist or the destination has no channels defined
Hi,
My code connects to remote object using the destination id as 'orgFilterService'. This was working fine, but all of a sudden it has started giving the below mentioned fault message.
fault--> [MessagingError message='Destination 'orgFilterService' either does not exist or the destination has no channels defined (and the application does not define any default channels.)']...detail : Couldn't establish a connection to 'orgFilterService'...errorID : 0...faultCode : InvokeFailed
I am creating the build in Flash builder, and it works fine in my local machine when run from flash builder; whereas, when moved to a UNIX box, it starts giving this error. Again, this was working fine in the UNIX box also before this build.
I have verified the entries in remoting-config and servivecs config - both are fine, and are untouched since from the last time it was working. Also, it is able to connect to other destination id, but not to this!!
Entry in remoting-config:
<default-channels>
<channel ref="my-amf"/>
</default-channels>
<destination id="orgFilterService">
<properties>
<source>com.jpmorganchase.pfitr.boreport.DrillOrganizationReport</source>
</properties>
</destination>
Entry in services-config:
<channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
<endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
</channel-definition>
Changing the build doesnt resolve this error.Please let me know if any kind of refresh needs to be done or any temp files/cache needs to be removed.
Thanks,
Vipul SharmaOk, I'll get that a shot. I know the docs talk about using the project creation wizard, but I really would like to be able to just drop in Blaze as some jars and config files. So doing this by hand is my preferred method. Is there any docs talking about setting up Flex Builder projects to work with Blaze? Like the way you're telling me or is what you're showing me it. Because up to this point I've just added stuff to web.xml, create /flex/configs.xml files, and now this compiler param. I have not replaced the {server.context} etc tokens or anything in the configs. Do I need to change that? I saw some posts talking about using full paths instead of tokens, but that would make it a pain to deploy. However when I tried to set those like the post said, the compiler complained about setting those params twice. I'm guessing that means they're already set? However I would think those url prams would need to be relative so I can move my application from localhost to my domain.com server, right?
-
LifeCycle Manager: The kind 'Note' does not exist in the CMS
Hi there,
I'm trying to promote a Crystal Report from one relatively fresh XI 3.1 environment to another fresh XI 3.1 environment (TEST to PROD) using LifeCycle Manager, and for this report, which has no dependencies, I get the following error when I do a Test Promote or actual Promote:
Commit Status=Commit attempted and failed, Promotion Status=Failure : com.businessobjects.lcm.utilities.LCMException: com.businessobjects.sdk.biar.exception.XSDException$UnknownKindException: The kind 'Note' does not exist in the CMS. (FWM 04030)
Has anyone encountered anything similar to this? I can't find any InfoObject that logically relates to the type/kind 'Note'. Perhaps it has to do with discussions?
Thanks,
AllanHi,
Can you try promoting it with the security option enabled.
Based on the error condition it seems that the discussion plugin does not exist in the destination system. -
The build directory of the test run either does not exist or access permission is required.
i am trying to run automated tests
i follow the steps in the web but when i have 2 issues that does not solve
1. i created console project and add build definition without drop folder and queue builds that success.
2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
5. when i try to associate the builds for the test plan i have a PROBLEM(1):
this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
and than when i try to run the automated tests i have this PROBLEM(2):
The build directory of the test run either does not exist or access permission is required. and the test failed.
Please Help
RoeyHi Rory,
Thank you for posting in MSDN forum.
According to the error message:
(1) a pop up shown with error : " The build that you selected for this plan no longer exist "
I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
with yours like the following screen shot.
However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
I know that the error message occur in either of the following conditions:
1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.)
2. The build directory itself does not exist.
So please refer the following blog to check this issue:
http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry THi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki -
Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
PraveenHello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan -
"the specified domain either does not exist or could not be contacted"
Dear Experts,
I made an installation of BPC 7.0 MS SP04 in a multiserver environment. Installation process terminated correctly. My installation user is a domain user, and he's also local Administrator on my Web/Application Server.
I simply want to add a domain user to my ApShell: so I log on to ApShell with my installation user, then I click to "add a new user".
When I try to click on "Available domain [domain name]" to see domain resources, popup appears with the following message: "the specified domain either does not exists or could not be contacted".
I cannot browse in to the domain!
Additional information:
1.The domain has been added from BPC server manager ->define system user group->domain
2.The BPC server are in the same domain to which this domain user belongs .
3. I can browse the domain resources with installation user from Appl/Web server using start->control panel-> Administrative tools-> Component Services->Active directory.
4. It's possible also add another domain user on the security of any folder.
5. I restarted COM+ application "OSoftUserManage"
6. We have another multi server installation in the same domain, the installation user is the same, there is no problem about AD browsing.
Any help would be appreciated.
Regards,
Dario
Edited by: DARIO CUPPARI on Nov 3, 2009 3:23 PMI opened a case with Microsoft and this problem has been fixed!
The issue was that I had both a Preferred DNS server (my local DNS server) and an Alternate DNS server (8.8.8.8, which I added for "good measure" in my ignorance) listed on the server. Removing the Alternate DNS server fixed the problem.
(Control panel/Network and Sharing Center/Change Adapter settings
Right click on your connection, choose properties.
Click on TCP/IPv4 (unless you are using IPv6...) and choose properties
Make sure there is only a Preferred DNS server listed.)
Why redundancy is not a good idea is a mystery to me, but in this case it isn't.
Peggy Thrasher -
Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'
App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\). -
Tutorial - Create a blog reader Store app (C++) - Error:The name does not exist in the namespace!
I'm trying to create my first store app based on msdn's sample.
Link to the sample:
https://msdn.microsoft.com/pl-PL/library/windows/apps/hh465045.aspx
I have problem doing last step (number 3) of part 3.
In code below in file App.xaml the compiler get the error "The name 'FeedDataSource' does not exist in the namespace 'using:SimpleBlogReader'"
<Application
x:Class="SimpleBlogReader.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:SimpleBlogReader">
<Application.Resources>
<local:FeedDataSource x:Key="feedDataSource"/>
</Application.Resources>
</Application>
In the file App.xaml.h I added line #include "FeedData.h", and FeedData.h looks like:
//feeddata.h
#pragma once
#include "pch.h"
namespace SimpleBlogReader
namespace WFC = Windows::Foundation::Collections;
namespace WF = Windows::Foundation;
namespace WUIXD = Windows::UI::Xaml::Documents;
namespace WWS = Windows::Web::Syndication;
/// <summary>
/// A FeedDataSource represents a collection of FeedData objects
/// and provides the methods to retrieve the stores URLs and download
/// the source data from which FeedData and FeedItem objects are constructed.
/// This class is instantiated at startup by this declaration in the
/// ResourceDictionary in app.xaml: <local:FeedDataSource x:Key="feedDataSource" />
/// </summary>
[Windows::UI::Xaml::Data::Bindable]
public ref class FeedDataSource sealed
private:
Platform::Collections::Vector<FeedData^>^ m_feeds;
FeedData^ GetFeedData(Platform::String^ feedUri, WWS::SyndicationFeed^ feed);
void DeleteBadFeedHandler(Windows::UI::Popups::UICommand^ command);
public:
FeedDataSource();
property Windows::Foundation::Collections::IObservableVector<FeedData^>^ Feeds
Windows::Foundation::Collections::IObservableVector<FeedData^>^ get()
return this->m_feeds;
property Platform::String^ CurrentFeedUri;
void InitDataSource();
void RetrieveFeedAndInitData(Platform::String^ url, WWS::SyndicationClient^ client);
How to solve this problem?You're testing this too early. You haven't yet finished writing code that your current code depends on. Feeddata.cpp won't build, so you can't use the data object that hasn't yet been created.
In particular, feeddata.cpp doesn't build since it has many references to items which get added in later steps.
For example, TextHelper is added in part 5 and App::RemoveFeed is added in part 10.
You'll need to either wait until you've implemented those before you test or comment out the calls to the unimplemented features until they're done. TextHelper looks like it adds quite a bit and you're almost there, but you can probably get away with commenting
out the calls to RemoveFeed and GetTitlesFromUri for now. -
DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3
Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
ABAP Program SAPLCLVF
Application Component CA-CL-CL
Date and Time 11.06.2014 12:08:28
Short text
A table is unknown or does not exist.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLVF" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104 if dupl = kreuz.
105 insert auspc_v2 client specified from table auspcv2
106 accepting duplicate keys.
107 else.
108 insert auspc_v2 client specified from table auspcv2.
109 if syst-subrc ne 0.
110 message a585 with tabausp.
111 endif.
112 endif.
113 refresh auspcv2.
114 endif.
115 read table auspcv3 index 1.
116 if syst-subrc = 0.
117 if dupl = kreuz.
118 insert auspc_v3 client specified from table auspcv3
119 accepting duplicate keys.
120 else.
121 insert auspc_v3 client specified from table auspcv3.
122 if syst-subrc ne 0.
123 message a585 with tabausp.
124 endif.
125 endif.
126 refresh auspcv3.
127 endif.
128 read table auspnv1 index 1.
129 if syst-subrc = 0.
130 if dupl = kreuz.
131 insert auspn_v1 client specified from table auspnv1
132 accepting duplicate keys.
133 else.
>>>>> insert auspn_v1 client specified from table auspnv1.
135 if syst-subrc ne 0.
136 message a585 with tabausp.
137 endif.
138 endif.
139 refresh auspnv1.
140 endif.
141 read table auspnv2 index 1.
142 if syst-subrc = 0.
143 if dupl = kreuz.
144 insert auspn_v2 client specified from table auspnv2
145 accepting duplicate keys.
146 else.
147 insert auspn_v2 client specified from table auspnv2.
148 if syst-subrc ne 0.
149 message a585 with tabausp.
150 endif.
151 endif.
152 refresh auspnv2.
153 endif.Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano -
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:
Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun -
Error: This application required an Xtra (ActiveX...) that either does not exist or failed
Hi All,
im having trouble few days now , i hope someone can give me a lead here.
i have a director mx file written in arabic, i open it in Director 11.5, the file behave strangely, very slow publishing process, very slow access to the xtra list.
after publishing (shockwave and html), i open the html, the preloaded start to run but i can see its not reaching 100%, after a while i get the error massage:
"This application required an Xtra (ActiveX...) that either does not exist or failed..." and firebox or IE crashes.
In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
things i try with no success:
uninstall and reinstall shockwave player
check the same file in another machine
exclude and include xtras in Publish Settings > Files
add activex.x32 from other places
Hope for good news
Win Xp sp3
Thanks
ShayIn the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
Because AX controls aren't SW-safe. You will have to redesign your file to remove the ActiveX control if you want it to run in a browser. -
ipad air 2 there's no silent mode like the other iPads ?? the button that does it does not exist on the iPad air 2 what does replace it??
hi the older button could be set to either "force portrait mode" or "silent mode". now you can do both in the iOS control center (swipe from the bottom of the screen), so the need for a button isn't needed anymore.
-
REP-52005: The specified key userlogin does not exist in the key map file.
Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
; OracleAS Reports Services ;
; CGICMD.DAT ;
; Example CGICMD.DAT Mapping file ;
; Syntax:
; KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case sensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
; 1. Parameter on command line to the reports servlet
; e.g. http://machine/servlet/rwservlet?KEY
; 2. Parameter on command line to a reports jsp
; e.g. http://machine/mydir/myreport.jsp?KEY
; 3. Within a reports jsp - in the rw:report custom tag
; e.g. <rw:report parameters="KEY">
; In addition to the Reports Server command line parameters, VALUE can include special parameters
; represented as "%X", where X identifies the parameter. Currently recognized special
; parameters:
; %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
; %* - entire contents (all arguments) of original rwservlet URL request.
; %D - request users to input database userid everytime they run the report.
; %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
; construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
; CGICMD.DAT Usage Notes
; 1. Multiple keys in this file MUST be separated by an EXTRA empty line.
; 2. Extra spaces are ignored. Multi-line entries allowed.
; 3. Lines starting with ";" character are treated as a comments.
; 4. Comments within a key or key value are NOT allowed.
; 5. NLS language support is provided and can be used (encoding should match the one
; used in HTML request - no language conversion of any kind is attempted.
; 6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
; The HTML format in the future may be mapped to the HTMLCSS format.
;;;;;;;;;;;; Example Key Entries
; Example 1: Run a simple breakb report and output to HTML
orqa: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 3: use %D to require user authentication every time
report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
; Example 4: Take all arguments from URL and send it to the reports server
run: %*
; Example 5: Run breakb report with HTML parameter form.
breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
; Example 6: take all URL arguments, and also generate a HTML parameter form
runp: %* %P
; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
;;;;;;;;;;;; Keys for Reports Demos
; Using default/in-process server.
; JSPs
;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
;charthyperlink_ids: userid=scott/tiger@ %*
;barcodeweb: userid=oe
;parmformjsp: userid=oe
;tutorial: userid=oe
; Paper Reports
;xmldata: userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
;barcodepaper: userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
;distributionpaper: userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
;pdfenhancements: userid=oe report=utf8test.rdf destype=cache desformat=pdf
userlogin : userid=SYMFINBTOTEST@fin10r21 %*
As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
Parsed Map File Entries
Return to Top
Key Name
Value
runp
%* %P
breakbparam
report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
report_defaultid
report=breakb.rdf destype=cache desformat=html server=repserver
run
report_secure
report=breakb.rdf destype=cache desformat=html server=repserver %D
express
report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
orqa
report=breakb.rdf destype=cache desformat=html server=repserver
Please help me to to make the key being populated here and being used by the reports server.
Thanks,
Priyauncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------
Maybe you are looking for
-
I have 2 icloud accounts - how do I combine them?
I currently have 2 icloud accounts and I am looking for a way to combine them into one account. Can anyone help me with this?
-
I can not print from my mac laptop. I have the airport extreme for wireless. I can print from my Mac using wireless but not my laptop. Laptop see the printer but says its offline when I attempt to print. Help!
-
NHL GameCenter audio sync issues
NHL GameCenter audio is slower than the video on Apple TV. I even swiched to connecting the AppleTV to my Airport via Ethernet to eliminate any transfer issues. NOTE - if I watch the game on my XBox or MB Pro - no issues. Thoughts?
-
My iPhone screen went black. Is there anything I can do to make operational?
-
Message error-50 on movie downloads
I down loaded a movie or purchased a movie on itunes and while it was downloading I lost or might have lost internet services but I got a error-50 message and now i can't get the movie to down load do i have to repurchase the movie or what?? I tried