Detecting OS version and architecture from deployment wizard in WinPE

I have a custom wizard page that is displayed after the user chooses task sequence. I'm trying to add some logic to this custom page and I need to be able to detect the OS version and architecture that the task sequence is going to install.
First I tried using "oEnvironmentItem("OSVersion")" but because we are in WinPE this returns as "WinPE", not the OS that is configured to task sequence.
Is there a built-in function already that I can use?

Oenvironment.item("imageprocessor")
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

How to detect full version and patch version for planning 9.3

Hi,
I'd like to detect full version name and applied patch (fix) version for planning 9.3?
And other products of EPM too.
Please help me.

For AAS, APS and HBR, log on to the AAS Console and go to Help - About
For Essbase, right click the Analytic Server in the AAS Console and go to Edit - Properties
For FR, log on to the FR Studio and go to Help - About
For the Workspace, log on to the Workspace and go to Help - About Workspace. Click Version Details to get the Web Analysis version.
Hope this helps.
Seb
www.capiotech.com

Detect closed buttons and vi from VIs inside subpanel

Hi I have a problem regarding the closed buttons and frontpanel from vis inside the subpanel.
I am using Labview 7.1. Pls see the attached. Inside the attached, they are main, first, second and subpanel.
First, second and main are supposed to be inside the subpanel. First and second vis are closed by means
of their own close buttons while the main vi is closed by means of delay.
I thought of using the F.P.state property to tell the states of Vi inside the subpanel. But it does not seem to work.
Please help.
And secondly as a thoughts on separate issue , building the main.vi that would be reponsible for opening first and second vi, by means of open vi property and open vi function.
When it works, then I run subpanel to open main vi inside . But somehow first and second vi open outside subpanel. Do do you think putting all vis in the subpanel would be better than putting the main inside the subpanel, where the main vi would later open other vis?
Thanks
Clement
Attachments:
subpanel.zip ‏23 KB

Hi Clement,
For VIs in subpanels the value of Front Panel Windowtate is always Hidden. I modified your code to use the Executiontate VI property. Hopefully you'll find the attached subpanel.vi useful.
Jennifer R.
National Instruments
Applications Engineer
Attachments:
subpanel.vi ‏33 KB

Detecting column name and value from a xml

Dear all,
I need to create a procedure to get a xml file. The xml file may contain a table data or procedure parameter value. Off course it will also contain a flag if the data is of a procedure or table nnd then it's table or procedure name, column name(in case of table), and value. The procedure will receive the xml file and it does not know the column name in case of table or parameter name in case of procedure and then its value. i.e i have to parse the xml file without knowing the column name for table or parameter for procedure. Then i may populate data to my need. How can i do that? Please help me.
BR.
Tarik
Edited by: Tarik_kuet on Sep 23, 2008 2:32 PM
Edited by: Tarik_kuet on Sep 23, 2008 2:32 PM

You need to cast your data into an xmltype and look for the existence of nodes for tables, proceduresm etc
with xmldata
as
(select xmltype('<?xml version="1.0" encoding="UTF-8"?>
<Sample UniqueID="KWID_AP" >
     <Description>Sample Application</Description>
     <Table Name="SampleTable" />
     <Procedure Name="SampleProc" />
</Sample>') xml
from dual)
select * from xmldata
where existsnode(xml,'/Sample/Procedure')=1

Detecting JVM version, and prompting an install

Hello folks:
I'm a CRM administrator, and I know enough Java to be Dangerous. Our CRM currently uses a Java based client to initiate chats. The problem is there is a queue before hand, and if the customer has MS VM or an older version of JVM, then they get kicked out and prompted to install. I want to do this before they start waiting. Is there a quick bit of HTML or JS that I can use with PHP that will re-direct the customer based upon their JVM version?

Basically the chat system works as follows:
Customer submits a request.
They are put into a holding pattern (queue).
When there is an available agent, the customer is pushed to a Java base chat applet. If they do not the appropriate version of Java installed, then they are kicked out and prompted to install Java. This means that the customer will have waited x minutes, and then when they're about to get help, they are told to install a program to use our chat program. Not very helpful!
Thus, I would like to run a check before they even submit their chat session. Ideally it would run a check, and either have a pop up or display a message advising the customer to install.

How to detect the OS version and the hardware info??

Hi all, according to the project needs, I to know how to detect OS version and the hardware info.
The point is to detect client's OS version, weather Win98, 2000, XP, Vista.
I have been search the information for several days already.
But can not really found a example which returns the OS version like"Windows XP Version 2002 *****".
And also could not find the CPU type such as"Core 2 due, or pentium D".
Is there anyone have done this before?
Thanks.
The Info I need looks like the photo below.
Message Edited by EricLu on 07-21-2009 08:09 PM

Well, in fact I have the VI and also read the topics as well...... The searching tag is OS info , system info......... After reading your post, now I understand the relation between the version number and the real OS version now, tks. And another problem is, the processor type returned within the VI have only 4 type:"INTEL 386, INTEL 486, PENTIUM, Unknown".
It can not really return my CPU TYPE. For example the desktop I’m using now is a Pentium, D , 2.80G, 2.80G.. and it only returns type "Pentium". That's why I'm asking is there any other way to do this...... (( Please forgive me if you can not really know what I'm talking about in my first post, now I know how bad my english is....... )) I guess I can only try to find out the solution from the registry then... Thanks for your information and reply.
Message Edited by EricLu on 07-21-2009 09:25 PM
Message Edited by EricLu on 07-21-2009 09:26 PM

SSIS Not Detecting Input Service or Method from WSDL File

I have a WSDL file saved locally (first downloaded from a developer kit, which instructs to save it locally and NOT download it from a public URL), and I'm trying to use it in a Web Service Task in SSIS (2008 R2 Enterprise Edition). I'm pointing to the local
file in the Web Service Task Editor (General tab). The HTTP Connection is pointing to a URL that has had a successful test connection in the HTTP Connection Manager.
However, the Input tab dropdown menus for selecting Service and Method are blank. I'm not getting any errors about the WSDL file itself. It looks to be well-formed and valid. I'm not sure why SSIS isn't detecting the services and methods from the WSDL document.
I tried saving a different WSDL document locally from
http://graphical.weather.gov, and that worked in a different Web Service Task. I'm guessing there's something wrong with the structure of the WSDL. I saw this
similar post that makes me think this is indeed the case.
The WSDL was accessed with account credentials, so I've redacted identifying information in the code below:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="Service" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:error="http://www.[redacted].com/error" xmlns:co="http://www.[redacted].com/co" xmlns:srv="http://www.[redacted].com/srv" xmlns:tns="http://www.[redacted].com/tns" targetNamespace="http://www.[redacted].com/tns">
<wsdl:types>
<xsd:schema>
<xsd:import namespace="http://www.[redacted].com/XMLSchema/1" schemaLocation="1.xsd"/>
<xsd:import namespace="http://www.[redacted].com/XMLSchema/2" schemaLocation="2.xsd"/>
<xsd:import namespace="http://www.[redacted].com/XMLSchema/3" schemaLocation="3.xsd"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ServiceRequestMessage">
<wsdl:part name="Body" element="srv:ServiceRequest"/>
<wsdl:part name="security" element="co:security"/>
</wsdl:message>
<wsdl:message name="ServiceResponseMessage">
<wsdl:part name="Body" element="srv:ServiceResponse"/>
</wsdl:message>
<wsdl:message name="ServiceErrorMessage">
<wsdl:part name="ServiceError" element="error:Errors"/>
</wsdl:message>
<wsdl:portType name="ServicePortType">
<wsdl:operation name="ProcessService">
<wsdl:input name="ServiceRequest" message="tns:ServiceRequestMessage"/>
<wsdl:output name="ServiceResponse" message="tns:ServiceResponseMessage"/>
<wsdl:fault name="ServiceError" message="tns:ServiceErrorMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="ServiceBinding" type="tns:ServicePortType">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="ProcessService">
<soap:operation soapAction="http://soap.[redacted].com/binding" style="document"/>
<wsdl:input name="ServiceRequest">
<soap:body parts="Body" use="literal"/>
<soap:header message="tns:ServiceRequestMessage" part="security" use="literal">
<soap:headerfault message="tns:ServiceErrorMessage" part="ServiceError" use="literal"/>
</soap:header>
</wsdl:input>
<wsdl:output name="ServiceResponse">
<soap:body parts="Body" use="literal"/>
</wsdl:output>
<wsdl:fault name="ServiceError">
<soap:fault name="ServiceError" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="ServiceService">
<wsdl:port name="ServicePort" binding="tns:ServiceBinding">
<soap:address location="https://ws.[redacted].com/service"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Is there anything in this WSDL that SSIS does not support? Or am I just missing something simple? Thanks.

Hi, you may want to walk through the following threads:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/01/28/consuming-web-services-in-ssis-script-task.aspx
http://stackoverflow.com/questions/21596429/using-https-wsdl-in-visual-studio-ssis
http://www.bidn.com/blogs/BillBrannen/bidn-blog/619/ssis-web-service-task-step-by-step
Regards, Leo

JDev 3.2 Deployment wizard failed to show public static methods in step #3.

JDeveloper 3.2 and 3.1 Deployment Wizard ( step #3) does not show any public static methods being deployed as Java stored procedures. The "settings" button is disabled.
Is this a demo version of the tool ?

It's probably easier to add them all and remove the ones you don't want. Admittedly this is a bit cumbersome, because the 3.2 navigator doesn't allow multiple selection..
(one area that's much better in 9i :) )
Brian

Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.

I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
per my business requirement.
The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
"Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
same version and product ID."
Please assist me anyone. It will be so kind of you.....
Naveen Kumar
Steria India Ltd.

Did you updated the AppManifest.xml file
and change the version.
If this helped you resolve your issue, please mark it Answered

When I was updating I Phone version 4 from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

What is the correct way to use Version Information from the sequence and from the deployment tool

I seem to be missing something in how the various version numbers are supposed to be used. My end goal is to log and possibly display in the UI the version of the sequence and which installer version was used to inspect a UUT. I have gotten most of the way there using:
How Can I Programmatically Query the Sequence File Version of My TestStand Sequence?
and logging this into the report with a function which contains:
Parameters.UUT.AdditionalData.SetValString("Test Version",1,RunState.SequenceFile.Data.Version),
Parameters.UUT.AdditionalData.SetFlags("",0,PropFlags_IncludeInReport)
The "Deployment Version" in the TestStand Deployment Utility auto incrementing the 3rd position of a version number while the sequence auto increment is working on the 4th.
My first question is are these 2 version numbers in anyway supposed to be related to each other? As it seems to me you would want those 2 reversed, I can make several installers based on sequence version X, making changes to what supporting files are also installed.
If they are not related as I suspect that they are not. How do I programatically grabed the installer version and also log that into the result report?
is there an option to perform a custom deployment build step to log the deployment version before it builds and then reference that log at runtime of the test?

Hi,
The sequence file version and deployment versions are not related.
You can build the installer with whatever version you want using the command line :
https://decibel.ni.com/content/docs/DOC-38947
Hope this helps,
Ravi

SharePoint 365 Deploy App -- "another App with the same version and product ID."

Hi all
When I want to deploy App I got this message:
2>Active Deployment Configuration: Deploy App for SharePoint
2> Skipping deployment step because a pre-deployment command is not specified.
2> Skipping the uninstall step because the app for SharePoint is not installed on the server.
2> Install app for SharePoint:
2> Uploading the app for SharePoint...
2>Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.
If the App exist why it doesn't uninstall it. And also its not possible to Retract:
Skipping the uninstall step because the app for SharePoint is not installed on the server.
I solved my problem by changing ProductID manually but I don't want to make the server with dirty small apps.
Any idea?
Thanks

Hi,
Check the Site URL in project properties to which the app is installed.
You have to choose the right path first where the app is installed and then Build>Retract.
Then change the path to new one and try build. It looks like you are trying to retract from wrong Site URL.
Thanks
Jashandeep K

I updated iTunes to 10.4 version and now it doesn't start and sen a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regard

I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards

Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver!

MDT Deployment Wizard doesn't start after booting from the LiteTouchPE.iso

Hello Experts,
I'm using the MDT 2013. When I boot the Physical machine or VM with the LiteTouchPEx86 or x64, I'm not getting the Deployment Wizard. It just stops with a command prompt X:\Windows\System32>. Anyone faced this problem earlier. I searched the Technet, but
I couldn't find any solutions.
I've done all the possible things which I know. Please help.
Regards,
Sukumar. R.

You are getting some kind of crash, or your variables are not setup correctly.
From the command prompt (X:\Windows\System32 ) Run the following command and let us know what the error message is (exactly):
cscript x:\deploy\scripts\litetouch.wsf /debug:true /debugcapture
It should crash or exit with error error. If it does not crash with a specific line number, then please copy the bdd.log file to a public site like OneDrive and copy the link here.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Detect new version from a JWS app

Hello to everyboy,
I have a JavaWebStart app that lives for long time (the user has the ugly idea to not close it).
Sometimes I have need to change the version on the web server. So I have the chance that the app will be updated only when the user closes it.
Instead, do you know a method to detect that a new version is available from the application itself (while it's running) ? In this way I could force a shutdown...
Thanks

this seemed like needed functionality, so I have been proposing an "updateAvalable()" and a "restart()" API as extensions to the DownloadService
for a future release.
In the mean time you might try putting a version string resource in the main jar file, and putting a version file at the codebase.
Then your code could download the version file and compare the version string to the resource periodically to see if an update is needed.
/Andy

Detecting OS version and architecture from deployment wizard in WinPE

Similar Messages

Maybe you are looking for