Detect closed buttons and vi from VIs inside subpanel

Hi I have a problem regarding the closed buttons and frontpanel from vis inside the subpanel.
I am using Labview 7.1. Pls see the attached. Inside the attached, they are main, first, second and subpanel.
First, second and main are supposed to be inside the subpanel. First and second vis are closed by means
of their own close buttons while the main vi is closed by means of delay.
I thought of using the F.P.state property to tell the states of Vi inside the subpanel. But it does not seem to work.
Please help.
And secondly as a thoughts on separate issue , building the main.vi that would be reponsible for opening first and second vi, by means of open vi property and open vi function.
When it works, then I run subpanel to open main vi inside . But somehow first and second vi open outside subpanel. Do do you think putting all vis in the subpanel would be better than putting the main inside the subpanel, where the main vi would later open other vis?
Thanks
Clement
Attachments:
subpanel.zip ‏23 KB

Hi Clement,
For VIs in subpanels the value of Front Panel Windowtate is always Hidden. I modified your code to use the Executiontate VI property. Hopefully you'll find the attached subpanel.vi useful.
Jennifer R.
National Instruments
Applications Engineer
Attachments:
subpanel.vi ‏33 KB

Similar Messages

HT4623 i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting

i am updating to ios 6.1 but i dont want immediatly i have shut down my iphone by holding sleep wake button and home button and cracks from that time and its not restarting

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

Help with email buttons, and uploading from a webpage you created

Would anyone know how to create a 'contact us' page for a website, so people can send you their contact info and files?
The GoLive book says your provider does this, but my large hosting provider said you do it in GoLive.
Most sites have a 'contact us' page, where you can fill in your name and address, and send a PDF or file, just by clicking a 'send' button.
If someone could help me with this, I'd appreciate it.
Thank you.

If your provided provided PHP scripting you can use NateMail from MindPalette (NateMail 3.0.15), and it's free. It's a forms fill-in email contact that can be built in GoLive. I've used it with great success on my site.
Here is a link to my page:
http://www.redshift.com/~lorac/Mail/mail.php
Here's a link to NateMail:
http://www.mindpalette.com/scripts/index.php#NMAnchor
Hope this helps.
Carol

Lost Highlight Execution button and more from tool bar

So this is probably a dumb...but I've somehow "lost" the highlight execution, pause, probe and stepping buttons from my block diagram window toolbar. I'm Struggling a little bit trying to figure out how to bring them back, probably something dumb but not knowing where to look I need help. The "View Toolbars" option under the View menu is disabled, if that means anything.
Thanks.

Hey, It seems somebody won me this race , I'll be faster next time
Regards.
Robst
Robst - CLD
Using LabVIEW since version 7.0

Detecting column name and value from a xml

Dear all,
I need to create a procedure to get a xml file. The xml file may contain a table data or procedure parameter value. Off course it will also contain a flag if the data is of a procedure or table nnd then it's table or procedure name, column name(in case of table), and value. The procedure will receive the xml file and it does not know the column name in case of table or parameter name in case of procedure and then its value. i.e i have to parse the xml file without knowing the column name for table or parameter for procedure. Then i may populate data to my need. How can i do that? Please help me.
BR.
Tarik
Edited by: Tarik_kuet on Sep 23, 2008 2:32 PM
Edited by: Tarik_kuet on Sep 23, 2008 2:32 PM

You need to cast your data into an xmltype and look for the existence of nodes for tables, proceduresm etc
with xmldata
as
(select xmltype('<?xml version="1.0" encoding="UTF-8"?>
<Sample UniqueID="KWID_AP" >
     <Description>Sample Application</Description>
     <Table Name="SampleTable" />
     <Procedure Name="SampleProc" />
</Sample>') xml
from dual)
select * from xmldata
where existsnode(xml,'/Sample/Procedure')=1

Detecting OS version and architecture from deployment wizard in WinPE

I have a custom wizard page that is displayed after the user chooses task sequence. I'm trying to add some logic to this custom page and I need to be able to detect the OS version and architecture that the task sequence is going to install.
First I tried using "oEnvironmentItem("OSVersion")" but because we are in WinPE this returns as "WinPE", not the OS that is configured to task sequence.
Is there a built-in function already that I can use?

Oenvironment.item("imageprocessor")
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

SCSM 2012 - Portal - Is it possible to exclude Closed Requests and Incidents from the My Requests view

Some users have complained that they see to many in the My requests view and there isn't a requirement to see closed requests.
Ideally I would like them to be Listed by Status as default rather than Type and then be able to order the status as I wish - i.e. I want active alerts first, In Progress next, then resolved and lastly closed.

As far as I know this is not possible with the built-in SCSM portal. Neither the Silverlight webpart can be modified nor are there any settings to configure the webpart for requirements like you described.
Andreas Baumgarten | H&D International Group

SSIS Not Detecting Input Service or Method from WSDL File

I have a WSDL file saved locally (first downloaded from a developer kit, which instructs to save it locally and NOT download it from a public URL), and I'm trying to use it in a Web Service Task in SSIS (2008 R2 Enterprise Edition). I'm pointing to the local
file in the Web Service Task Editor (General tab). The HTTP Connection is pointing to a URL that has had a successful test connection in the HTTP Connection Manager.
However, the Input tab dropdown menus for selecting Service and Method are blank. I'm not getting any errors about the WSDL file itself. It looks to be well-formed and valid. I'm not sure why SSIS isn't detecting the services and methods from the WSDL document.
I tried saving a different WSDL document locally from
http://graphical.weather.gov, and that worked in a different Web Service Task. I'm guessing there's something wrong with the structure of the WSDL. I saw this
similar post that makes me think this is indeed the case.
The WSDL was accessed with account credentials, so I've redacted identifying information in the code below:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="Service" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:error="http://www.[redacted].com/error" xmlns:co="http://www.[redacted].com/co" xmlns:srv="http://www.[redacted].com/srv" xmlns:tns="http://www.[redacted].com/tns" targetNamespace="http://www.[redacted].com/tns">
<wsdl:types>
<xsd:schema>
<xsd:import namespace="http://www.[redacted].com/XMLSchema/1" schemaLocation="1.xsd"/>
<xsd:import namespace="http://www.[redacted].com/XMLSchema/2" schemaLocation="2.xsd"/>
<xsd:import namespace="http://www.[redacted].com/XMLSchema/3" schemaLocation="3.xsd"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ServiceRequestMessage">
<wsdl:part name="Body" element="srv:ServiceRequest"/>
<wsdl:part name="security" element="co:security"/>
</wsdl:message>
<wsdl:message name="ServiceResponseMessage">
<wsdl:part name="Body" element="srv:ServiceResponse"/>
</wsdl:message>
<wsdl:message name="ServiceErrorMessage">
<wsdl:part name="ServiceError" element="error:Errors"/>
</wsdl:message>
<wsdl:portType name="ServicePortType">
<wsdl:operation name="ProcessService">
<wsdl:input name="ServiceRequest" message="tns:ServiceRequestMessage"/>
<wsdl:output name="ServiceResponse" message="tns:ServiceResponseMessage"/>
<wsdl:fault name="ServiceError" message="tns:ServiceErrorMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="ServiceBinding" type="tns:ServicePortType">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="ProcessService">
<soap:operation soapAction="http://soap.[redacted].com/binding" style="document"/>
<wsdl:input name="ServiceRequest">
<soap:body parts="Body" use="literal"/>
<soap:header message="tns:ServiceRequestMessage" part="security" use="literal">
<soap:headerfault message="tns:ServiceErrorMessage" part="ServiceError" use="literal"/>
</soap:header>
</wsdl:input>
<wsdl:output name="ServiceResponse">
<soap:body parts="Body" use="literal"/>
</wsdl:output>
<wsdl:fault name="ServiceError">
<soap:fault name="ServiceError" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="ServiceService">
<wsdl:port name="ServicePort" binding="tns:ServiceBinding">
<soap:address location="https://ws.[redacted].com/service"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Is there anything in this WSDL that SSIS does not support? Or am I just missing something simple? Thanks.

Hi, you may want to walk through the following threads:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/01/28/consuming-web-services-in-ssis-script-task.aspx
http://stackoverflow.com/questions/21596429/using-https-wsdl-in-visual-studio-ssis
http://www.bidn.com/blogs/BillBrannen/bidn-blog/619/ssis-web-service-task-step-by-step
Regards, Leo

Question about Button and TextBox positions

Hello everybody,
I just started using Borland Together 6.1 extended with Java and I want to design a UserForm (an Application), especially a Online Bank terminal, where u can input and output different data. My problem is that when I add buttons and textboxes from the toolbox menu, I cannot put then on the place I want, I'm restricted to some positions (center, right, left, west, east and so on). My question is how can I create my elements on the position I want, how can I resize them. Could someone tell me some specific functions, which I should use.
Thankx

You should try to find a LayoutManager that suits you. If you can't find one, you can set the Layout to null, then use absolute positioning.
setLayout(null);
yourComponent.setLocation(50, 50);
yourComponent.setSize(40, 20);You need to set both the location and size of components when the layout is null.

I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!

I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!!!!!!!!!!!!!!!!!!!

Look her and it may give insite on what is missing. Otherwise:
Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Repair it yourself if you are up to it
iPod Touch Repair – iFixit

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

I want to have all my tabs return after closing. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked, but it does not work. When I open FF again none of my formerly open Tabs show... FF v.4.

When I open FF up again after I have closed it, I want all tabs to return. In Tools/Options/General/ I have' Show my Windows and Tabs from last time' checked-does not work. In addition, the feedback window fails to 'Submit...!'

Some things to check:
#'''Browsing history must be saved'''
#*Firefox button: Firefox button > Options > Options > Privacy > [X] Remember my browsing history
#*Menu Bar: Tools > Options > Privacy > [X] Remember my browsing history
#'''Also make sure you do not clear "Browsing History" when using Clear Recent History or when closing Firefox'''
#*Using Clear Recent History
#**Firefox button: Firefox button > History >Clear Recent History
#**Menu Bar: Tools > Clear Recent History
#*When closing Firefox
#**Firefox button: Firefox button > Options > Options > Privacy (checked) > Settings
#**Menu Bar: Tools > Options > Privacy (checked) > Settings
#**See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
#'''Make sure you are not in Private Browsing mode''' or '''in permanent Private Browsing mode''':
#*See: https://support.mozilla.com/en-US/kb/Private%20Browsing
#'''If you have the'''Tab Mix Plus'''extension''', then disable the built-in session restore.

My screen continually freezes up. I've tried closing all apps that are openfreezby double clicking on the home button and closing them. I have held down on the home button and start button simultaneously and it still freezes. Can someone out the help me?

MY screen continually freezes up. I've tried closing all apps that are open and have held down the home button and start button simultaneously but neither helped. Can someone out there help me?

Well the next couple of things to try would be to reset all settings, and if that doesn't help, it's probably time to restore the iOS software.
Settings>General>Reset>Reset all settings. That will take all settings on the iPad back to factory defaults. It will not delete anything and you will not lose any data, but you will have to enter all settings again ...WiFi passwords, enable Siri, select your wallpaper, adjust brightness, turn on location services and set privacy settings, etc, etc.
You can read about restoring the software here.
iTunes: Restoring iOS software - Support - Apple
Should you decide to restore the iOS, it is extremely important that you back up first so that you can restore from the backup and then sync with iTunes afterward in order to restore all content back to the iPad. It is all covered in the kb article.
If you do not sync with iTunes, then I assume that you backup with iCloud. In that case you can erase the device in Settings>General>Reset>Erase all content and settings. Once again, backing up with I loud is I,operative before you do this so that you can restore from the iCloud backup after you erase the iPad and start over again with activation.
You should read this first before you restore from either backup.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
This is a must read before you erase the iPad should you decide to go that route.
iOS: Understanding 'Erase All Content and Settings' - Support - Apple

HT1349 hi Mmm ive been told that installing linux on mac book pro retina 15 and even others and using it as my first sofware will make the mac heaqt up and burn from inside!!!!! true??????????

hi Mmm ive been told that installing linux on mac book pro retina 15 and even others and using it as my first sofware will make the mac heaqt up and burn from inside!!!!! true??????????

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

My iphone is showing the apple pic so i Pressed both home and sleep/wake buttons until the Apple logo appears, then release the sleep/wake button and continue pressing the home button alone until iTunes detects and Recoveys but it is gives an error 1051

my phone was showing the apple pic when i eraseed all content and settings so i did Pressed both home and sleep/wake buttons until the Apple logo appeared, then released the sleep/wake button and continued pressing the home button alone until iTunes detected the phone in Recovery Mode but an error is coming (1015) plz help me!!!!

plug into itunes and take it from there
http://support.apple.com/kb/HT1808

Detect closed buttons and vi from VIs inside subpanel

Similar Messages

Maybe you are looking for