Detecting the SAVE of the data to the planning buffer

Hi,
When the user has saved the planning buffer data after executing the planning function that has the Exit FM, how can I detect that the data from the planning buffer has been saved from my Exit FM?
Is there a way to detect that he user has clicked on the SAVE button to save the data in the planning buffer?
Thanks,
RT

Hi Rob,
A non standard functionality may be to create a custom FM that is called in the exit. Then, you will notice the save inside the custom FM and do what you want and then call the SAP Standard FM to save data.
Hope it helps.
Regards,
Diego Lombardini

Similar Messages

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can't complete the operation because some data in the folder can't be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics

The Save as PDF option in the Printer dialog is not supported.

My client is asking me to save a separations PDF file. But whenever I save it to PDF, a this message pops out: The Save as PDF option in the Printer dialog is not supported. I'm using InDesign cs5 and Adobe PDF 9.0. I'm on Mac OS X 10.6.6.

What it says is correct, have a look at this post here.

How to hide the Save Results Layout checkbox on the Create Saved Search pop

I need to hide the Save Results Layout checkbox on the Create Saved Search popup. Can anyone tell me how to do it?
This popup is used when the user is on a query (rendered by the af:query component) and they select click the "Save..." button. The have three options, Set as Default, Run Automatically, and Save Results Layout. I have an implementation that supports everything except saving the layout. So I need to hide that checkbox.
Thanks,
Mike

For anybody else who needs to do this, here is how I did it.
Add this to your css
/* This hides the Save Results Layout checkbox on the Create Saved Search screen */
span[id$='saveLayout'] {
visibility: hidden;
}

Anyone know why since May 18th I get this when checking my POP3 mail from Mail? 'The server returned the error: The attempt to send data to the server "(null)" failed.' Looked at all the debates on here, nothing works. APPLE?!

<rant>I have seen many people complaining about this. I've seen lots of suggestions; change your POP3 SSL number, twist your knee backwards whilst standing on just your little finger. Nothing works. I'd like to not have to migrate to a new Mail software.
</rant>
I thank you.
<Edited by Host>

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

How to process data in the past based from data in the present

hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi ‏16 KB
weight.txt ‏1 KB
data .txt ‏1 KB

Hi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir.

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

How to get the ep user information data in the web dynpro?

Hi all
I want to create a web dynpro application on EP.I want to get the ep user information data in the web dynpro.How can I do?Thanks.

Lin,
Two steps to achieve this:-
Step 1: Add the following code in your view Controller:-
IWDClientUser user = WDClientUser.getCurrentUser();
IUser objUser = user.getSAPUser();
wdContext.currentContextElement().setXXXX(objUser.getUniqueName());
wdContext.currentContextElement().setYYYY(objUser.getFirstName());
wdContext.currentContextElement().setZZZZ(objUser.getLastName());
where XXXX, YYYY , ZZZZ are the context names.
getUniqueName : Gives Login id of Portal user.
getFirstName : Gives First Name of the Portal user.
getLastname : Gives Last Name of the Portal user.
Step 2 : Use "Organize imports" and make sure that you have the following two libraries added in the build path of your project. You can do these by right clicking on your project name ==> Properties ==> Java Build Path ==> Libraries ==> Add External jars.
The external jars are :
com.sap.security.api.jar
com.sap.security.api.perm.jar
Finally rebuild your project and deploy.
Regards,
Chintan Virani.

Why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.

why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening?
Any help would be very appreciated.

It looks that way..
"When LabVIEW starts it contacts the service
locator to removes all services for itself. This request is triggering
the firewall.This is done in case there were services that were not
unregistered the last time LabVIEW executed- for example from VIs that
didn't clean up after themselves"
This is not yet fixed in LV2009.
Message Edited by Ray.R on 11-04-2009 12:25 PM

Is it possible to hide the save function and only use the save as function in teststand

Hi,
When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
Is it somehow possible to "hide" the save button and only use the save as function?
Or is there another possiblity to solve my problem.
The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
What would even be great if there could be a log of what the changes were
Thx!!!

1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
Hope this helps,
-Doug

The attempt to read data from the server failed

Today I was looking into an error with several IMAP accounts in Apple Mail:
+The attempt to read data from the server "<<servername.tld>>" failed.+
At first I thought this was an Apple Mail problem, as the accounts in question seemed to work just fine when not used in combination. One possible answer to this problem is rather short:
Apple Mail uses IMAP caching, which uses more than 4 connections at the same time to the mail server. Some mail servers (like courier-imap in its default configuration) do not allow that much connections from the same IP address. The more accounts you are trying to connect to at the same time raises this number of connections. Meaning while you could probably check one account for new mails, the second will ultimately fail for no obvious reasons. The only solution to this problem is to raise the connections allowed by your IMAP server software. this solution only applies to people who have root access to their mail server.
in courier-imap you have to edit /etc/courier-imap/imapd
and change MAXPERIP=4 to a higher number (5 to 10 times the number of accounts you want to check simultaneously)
and change MAXDAEMONS=40 to a higher number (with only one user 200 might work, whereas if you serve multiple users, something like 500 or higher might be better suited).
of course increasing the numbers increases load on your server. this is why there are these restrictions in place.

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Adding a summary column in a table which contains the start and end dates in the week

Hi,
I've got a DIMENSION DATE table and want to add in another column which shows the start and end date of the week.
See below, the new column is WEEKOFYEARTEXT.
Does anybody know how i may generate this column using SQL and using the existing columns?
Umar Javed

See: http://www.sqlusa.com/bestpractices/datetimeconversion/
DECLARE @Year INT = '2015';
WITH cteDays AS (SELECT DayOfYear=Dateadd(dd, number,
CONVERT(DATE, CONVERT(char(4),@Year)+'0101'))
FROM master.dbo.spt_values WHERE type='P'),
CTE AS (SELECT DayOfYear, WeekOfYear=DATEPART(week,DayOfYear)
FROM cteDays WHERE YEAR(DayOfYear)= @YEAR)
SELECT WeekOfYear, StartOfWeek=MIN(DayOfYear), EndOfWeek=MAX(DayOfYear)
FROM CTE GROUP BY WeekOfYear ORDER BY WeekOfYear;
WeekOfYear StartOfWeek EndOfWeek
1 2015-01-01 2015-01-03
2 2015-01-04 2015-01-10
3 2015-01-11 2015-01-17
4 2015-01-18 2015-01-24
5 2015-01-25 2015-01-31
6 2015-02-01 2015-02-07
7 2015-02-08 2015-02-14
8 2015-02-15 2015-02-21
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

I have a new computer. I've installed iTunes. I don't want to lose the calendar and contact data nor the apps currently on my iPod Touch. Will that happen when I sync?

I have a new computer. I've installed iTunes. I don't want to lose the calendar and contact data nor the apps currently on my iPod Touch. Will that happen when I sync?

I don't think so. When you open iTunes, go to "Store" on the top and click "Authorize this Computer." Type in your email and pass, and click authorize. Then, when you connect you iPod for the first time, it should tell you "this iPod is synced with another computer, blah blah." It should give you the option to either "Erase and Sync," or "Transfer Purchases." Click "Transfer Purchases and your content should go into your new iTunes.
If this doesn't work and you still have your old computer there's another thing you can do. I know this works on windows, but I'm not sure how to do it on a Mac, maybe someone can offer some help. Assuming you have Windows, go to Start>Music>iTunes Media and you should see Music, Apps, Movies, etc. This is all the stuff in your iTunes. If you have an external hard drive or your iTunes library is small in terms of file size, you can do this in one go. Transfer the content (as much as you can fit at one time) onto the external storage. Then, put that content on your new computer on the desktop or somewhere where you can find it again. Open iTunes, and folder by folder highlight everything in the folder and drag it into the iTunes library. It should say "importing (content)" or something and then it should be in your library. If you look in your Music folder again, there should now be another "iTunes" folder there with all of your content back in it.
Hope one if these options works for you. Best of luck!

Server error: "The attempt to read data from the server '(null)' failed"

Multiple times during each day my client (Mail.app) puts up a little exclamation mark "!" next to the mail account hosted on our Leopard Server. Clicking on this little alert icon pops up a message that reads:
+There may be a problem with the mail server or network. Verify the settings for account “Leopard Server Account” or try again.+
+The server returned the error: The attempt to read data from the server “(null)” failed.+
I can make the "!" go away by choosing Mailbox>Synchronize>Leopard Server Account. And everything seems peachy but it inevitably pops up again in another hour or two. It's annoying because I'm not sure if mail is getting through or not when the "!" is up.
Any ideas why this is happening?

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Detecting the SAVE of the data to the planning buffer

Similar Messages

Maybe you are looking for