Determination of TAX Code from Tax Percent

Hello Gurus,
I have a requirement wherein, i need the VAT Code(Tax code) based on the tax percentage which I have.
I have with me the following information only:
1. Total amount(net + tax)
2. Tax Amount
3. country
4. company code.
5. Tax Percentage
Can you please let me know as to how will i get MWSKZ field based on above information. i.e TAX code.
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Oct 28, 2011 9:20 AM

Hi Manoj,
Go through the below tables .
<div class="jive-quote">T007A                       " Tax Code and Country
A003                        " Condition Code
KONP                     " Tax percentage
</div>
Regards,
Maruthi
Edited by: Rob Burbank on Oct 28, 2011 9:21 AM

Similar Messages

Determine of Tax Code for Country/Product Category - Table handling

Dear Experts,
in SRM 7.0, CS, i am facing the following requirement regarding tax codes:
We have users from different countries using SRM. These different countries have different tax codes that are to be used for legal reasons.
My question is, how i can achieve a system behaviour, by which in the shopping cart, the correct tax codes gets selected automatically, based on the country of the user, who is creating the shopping cart.
Question 1:
Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
Q2:
What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
Q3:
Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
Q4:
From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
Thank you very much for your help in understanding the topic.

Hi
Here are my responses to your questions:
Question 1:
Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
Answer - If you have a requirement where different countries have different tax codes, then you do need this confiugration. Otherwise Configuraiton in Enter Tax Code are sufficient.
Q2:
What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
Answer - Sometimes you have different codes for International and Domestic purchases for a product Category. IN those situations you can select Domestic/International field to differentiate btw tax codes. Otherwise this field can be left blank
Q3:
Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
Answer - No, if you enter country, then Category Id field is mandatory. You may enter * in case you dont have multiple backend systems. otherwise you will ve to ve individual entries for each category and backend system.
Q4:
From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
Answer - It is picked up from the address of the user where is will receive goods. and Domestic/International will be decided based on Vendor address with reference to thta address.
I hope my responses clarify your doubts.
Regards
Virender Singh

Get Tax Code from PO to service entry sheet in ML81N

Hello,
I am looking for a suitable user exit/Badi, which would get the Tax code from Purchase Order to Service Entry Sheet (ML81N). Currently user changing the tax code manually in service number line item (ML81N). Here is the process we are following.
1. Create the PO with service number in ME21N.
2. Goto ML81N and selecting Other POs.
3. enter the PO and Service number . At this stage this line item should pull Tax code form PO. But it is defaulting with some value.
I tried with all ML81N exits and could not find the solution.
Please let me know the suitable Exit /Badi.
Appreciate your suggestions and Points will be rewarded.
Thanks in Advance.
Lakshmi

Hi,
I think maintaining suitable Data Entry Profile will solve your problem. Take help from HR consultant.
SPRO->Cross Application Component->Timesheet->Specific Settings for CATS Classic->Setup Data Entry Profiles.
Regards

Input Tax code from logical partner LS but not from indiv vendor partner LI

Hi,
Find that tax code at vendor invoice is being taken from logical partner (LS) , but not from the individual vendor partner number (LI) . Bothe the partners are maintained in WE20 , OBCA , OBCD & OMRY.
Like to know the reason / setting to pick up tax code from logical partner (tax rates are same in both cases).
With regards,
Mrinal

Hi Dove,
I think you can use a substitution for field Bank Type at Item Level (TCODE OBBH). This would fill your bank type when you post the document in FI, then you won't have problems in F110.
Hope that helps.Cheers.
Ignacio.

Tax code from billing

Hai gurus,
I am making a report from account assignment group of customer and material to fetch the vat/cst amount.
Here i want the user to enter tax code since iam using tax inj procedure
can any one suggest me a field name for tac code from billing.
i tried with VBRP and VBRK tables. MSKWZ is there but it is not showing the tax codes which i meant to see is there any other field
With regards

Hai gurus
we have checked as per the reply and found out in VBRP with respect to the billing document(MWSK1) is not reflecting and it is showing blank. How can i fetch it?
With regards

Tax Code from ECC Contract or Info Record not picking in SRM7.0 SC

Hi Experts,
We are configuring SRM7.0 with ECC6 (Ehp4) having Classic Scenario.
In SRM Tax setting, we set as u201CTax calculation in backend systemu201D, we created and mapped Tax code with ECC and it is working fine.
In our case, Tax Rate varies as per Mat. Code & Country, irrelevant to Supplier.
Tax code will be maintained in the ECC Contract /Info Record & we are going to use it as a SoS.
However, while creating Shopping Cart, we must have to assign the Tax code at item level. If users makes any mistake and enter the different tax code, system does not validate it and create the classic PO with this tax code, which is different than maintained in ECC Contract /Info Record, which will be totally wrong and will create mess !
In tax code Config setting, we have option to default the Tax code, but it is on Country and Product Category basis .
Can someone confirm /suggest me , whether anyhow can we pull the Tax code from the selected SoS i.e. ECC Contract /Info Record, by using some BADi?
Thanks
NAP

Hi Experts ,
Any news on this please ?
Regards
NAP

Capturing Tax code from info record into shopping cart

We have a requirement where in we need to capture the tax code from the info record into the shopping cart in SRM .
If anyone has worked on a similar requirement , could you kindly share the details related to the solution.

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Cannot change Tax Code from the referenced sales order line

hi,
Has anyone ever got this error when creating Sales Order(SO): "*cannot change Tax Code from the referenced sales order line*"?
The error occur with order type Return.
This SO is created by copying from another SO.
Please help.
Regards & thanks,
eRie

hi,
Has anyone ever got this error when creating Sales Order(SO): "*cannot change Tax Code from the referenced sales order line*"?
The error occur with order type Return.
This SO is created by copying from another SO.
Please help.
Regards & thanks,
eRie

FTXP - Tax Percent.Rate

Hi - Is it possible to view the Tax Percent.Rate for several Tax Codes at the same time, is there Table? This is not included in T007A ot T030K........
Thanks in advance........

Use table T007V. The field amount is either the rate condition amount or percentage.
Elias

Tax percent rate

hi all.
In my project, i m maintaining A0( 0 % ),A1(10 % ),A2(15%) output tax codes..
In FXTP, under output tax type for MWS transaction, how can i change the tax percent rate....?For A1 its showing 7.00...but i want 2 change as 10.00...how can i change?
can anyone help me reg dis...
regards,
divya.s

Ok...the config is in
1. Check cal procedure
IMG\Financial Accounting <new for ECC> \Tax on sales and purchases\Basic settings\Check calculation procedure
2.Assign country to calc procedure
IMG\Financial Accounting <new for ECC> \Tax on sales and purchases\Basic settings\Assign country to calc procedure
3.Define Tax jurisdiction code
IMG\Financial Accounting <new for ECC> \Tax on sales and purchases\Basic settings\Define Tax jurisdiction code
4.Define tax codes <FTXP>
IMG\Financial Accounting <new for ECC> \Tax on sales and purchases\Calculation\Define Tax Codes for Sales and Purchases
5. Define Tax accounts
IMG\Financial Accounting <new for ECC> \Tax on sales and purchases\Posting\Define Tax accounts <OB40>
Hope this helps
Rgds
Rajendra
Points?!!

You cannot enter -0% in tax percent rate transaction FTXP

I cannot enter -0% in tax percent rate. The system deletes the negative sing and leaves 0%

I may be wrong but I don't know if we have anything called negative 0% (-0%). What effect do you really think -0% would have on any tax calculation?
Elias

Pass Plant Code from SD Billing Doc to FI Doc

For one of our company codes, it is necessary to produce financial reporting by plant. For this reason, we are in the process of implementing the use of business areas to reflect the plant value. We would like to ensure that the plant value is transferred from the SD billing document to the revenue line on the FI documents.
We have attempted the following technical user exit development:
1. Logic was placed in EXIT_SAPLV60B_004 to move the Plant Code from VBRP-WERKS into XACCIT-WERKS for select accounts.
2. Logic was placed in EXIT_SAPLV60B_008 to populate field WERKS in table XACCIT with the Plant Code for select accounts.
The above user exits were activated and we could verify by debugging that the XACCIT-WERKS field did in fact contain the Plant Code value, but this value was not properly transferred on to BSEG as we were informed it would be. These efforts have not properly filled the BSEG value resulting in an error during the billing process due to plant being required on certain accounts.
If possible, please direct us to the appropriate user exit that can be used to successfully transfer the plant value from the SD billing document to the revenue line on the FI documents.
Thank you.

Use Process BTE 1120. However, i'm confused as to whether you want plant or business area? I'm assuming you have a business area that corresponds to each plant value, so don't you want to set the business area value if it's not assigned from the master record?
BTE Example:
LOOP AT T_BKPF WHERE ...
      LOOP AT T_BSEG WHERE BUKRS EQ T_BKPF-BUKRS
                       AND BELNR EQ T_BKPF-BELNR
                       AND GJAHR EQ T_BKPF-GJAHR
                       AND KOART EQ 'D'
                       AND GSBER EQ SPACE.
* some determination code here
        READ TABLE T_BSEGSUB WITH KEY TABIX = SY-TABIX.
        CHECK SY-SUBRC EQ 0.
        T_BSEGSUB-GSBER = LS_DIVINFO-GSBER.
        MODIFY T_BSEGSUB INDEX SY-TABIX.
      ENDLOOP.
ENDLOOP.

How to determine the Support Team from Reported-by?

Hi All,
We need to determine the support team based on reported-by.
I have concluded it is only possible by customization of developing ZBADI from these threads:
Re: How to determine the Support Team from the Reported by?
Automatic determination support team based on own specs?
Re: Route tickets based on Message creaters's location
So we have created ztable which has relation between SAP component, Reported-by and Support Team.
Now i need to develope a ZBADI and assign to the action definition SLFN0001_ADVANCED_FIND_PARTNER(i hope).
Can anyone help me out with the piece of code. Because i don't which FMs to be called for read and update the support desk message.
Note: Action definition SLFN0001_ADVANCED_FIND_PARTNER uses method call Z_CRM_DNO_PARTNER_1(which is a copy of CRM_DNO_PARTNER_1 and applied some correction as per note: 1041455).
Thanks in advance.
Regards
Sanjai

closing this thread.

Delete transaction codes from a role

Hi,
I want to delete 20 percent of the transaction codes from a role and I have to carry out this exercise for 20 to 30 roles, please let me know how to go about it.
I know that I can go to the each role and delete each transaction by transaction but this process appears to be very tedious and time consuming, kindly let me know if there is any other alternative for this.
Please help.
Thanks
Suresh

Hello Suresh,
First create single column internal table, for example ROLES which will hold all the ROLES for which you want to delete transaction codes. Read all the required ROLES into ROLES table.
Now, You can create internal table, for example ITAB1 for ROLES and TRANSACTION CODES and read required roles and transactikon code from AGR_TCODES table.
Now loop at ROLES.
Move all the records from ITAB1 to ITAB2 where AGR_NAME = ROLES. --> as ROLES is single column table.
     DESCRIBE TABLE ITAB2 LINES <count>.
    Now find 20 % of the total <count>.
    Now use delete table with from 1 to <result after %age>
..... Go for next ROLE.
endloop.
For example:
If total transaction cod efor particular ROLE are 10 then
20% of 10 will be 2 transaciton codes.
so you can delete table <table> name from 1 to 2.
Hope this helps.
Thanks,
Augustin.

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How can i get the source code from java concurrent program in R12

Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
Zulqarnain

user570667 wrote:
Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Determination of TAX Code from Tax Percent

Similar Messages

Maybe you are looking for