Determine if program are in the same Unit of Work

Hi ,
I am currently determining if the EXPORT/IMPORT to memory id will work in 2 separate user exits. Is there a way to determine if 2 programs are in the same Logical Unit of Work ?
Thanks.

I tested in our sandbox and apparently, it did not work.
When I placed a break point in the first user exit, it does the EXPORT successfully.
As for the 2nd user exit (I placed a break point and activated the "Update Debugging" because the system will not stop at the break point without doing this), the IMPORT statement returned a sy-subrc = 4. It is not a case of a wrong IMPORT syntax because I also tested placing the IMPORT statement on the first user exit and it returned a SY-SUBRC = 0.
When a break point stops during "Update Debbuging On" , what does this mean ? Does this imply that they belong to a different LUW ?
Thanks/

Similar Messages

I have two iPod touch games trying to connect on mine craft. the one trying to join the game just keeps "searching for wifi games", we are in the same house, wifi working. HELP

I have two ipod touch. When trying to join game the second keeps "searching wifi games", we have connected with a friend before here. can't seem to connect HELP

Thanks, Bob! You are correct. And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE). One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind. Only with the Security Mode set to DISABLED, could we gain access.
2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers. Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

Hi,i need to upgrade my 13"late 2011macbook pro with an ssd drive.i have noticed there is a system hard drive for booting up and a data storage hard drive that my computer uses,are these the same hard drive i can see inside my laptop?

hi,i use logic pro 9 and cubase to record,produce and master audio recordings and have bought a mac as recommended.have upgraded to 8gig memory (which i was told was the maximum you could upgrade a macbook pro)and still my recordin is slightley behind plauback.i need to replace my hard drive with a solid state drive to solve the problem.i have seen on youtube how to replace the hard drive but have noticed on the disk partition information that there is a 500gig harddrive for the system(booting up ect)and a 500gig harddrive for data storage,are these the same unit?i need to be sure im upgrading what the system uses to an ssd as well as the data storage or the problem wont be solved.i have an external hard drive so i have been looking at a smaller,faster ssd. hope you can help!

DaisyMay wrote:
Firewire 400/USB 2.0/1.1
I would recommend not settling for less then USB 3 or hold out for Thunderbolt, if your machine is capable. Firewire 800 minimum.
MacBook Pro, Mac OS X (10.7), 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop6.0

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

Can multiple LabVIEW programs simultaneously access the same NI-DAQmx hardware?

I am developing a test station system that, in essence, runs several
seperate LabVIEW programs simultaneously on the same computer, each
controlling a different set of I/O channels on one shared set of NI
DAQ hardware (analog and digital I/O PCI boards with external signal
conditioning).
I have already gotten a system like this running almost flawlessly
using LabVIEW 6.1, NI-DAQmx 7.1 with traditional channels, and older
E-series DAQ hardware. So long as two programs do not try to write to
the same output channel simultaneously, everything works exactly as
expected--I can even read from the same (named) channel simultaneously
from more than one program. The only issue I have had is that if
one
of the compiled applications is closed (not just stopped, but closed)
while others are still running, Windows XP (SP1) will bluescreen on a
driver error. This is undesireable, but acceptable (though if there's
a fix/workaround, I'd love to hear it).
I am now building a similar system using mostly the same software
(with an upgrade to LabVIEW 7.1), and I've noticed that the new
M-series DAQ hardware seems to offer much more bang for the buck than
old E-series hardware and its kin.
My question is this: It appears that I/O on M-series hardware must be
performed with new mx channels, with traditional channels not being an
option. I am therefore wondering if I will be able to do this kind of
multiple simultaneous access with mx channels, or if I must purchase
the classic hardware and use traditional channels for this somewhat
unorthodox application.
(Incidentally, the multiple simultaneous program thing is a
requirement for this system, as it is the only clean way to run
multiple
identical copies of the same complete program that only
operate on different I/O channels, and re-doing the program from
scratch is not an option.)

Dear Anonymous,
Thank you for contacting National Instruments.
To address your question, I don't know if multiple simultaneous access with mx channels is possible, but I do not see why it wouldn't be. The best way to find out would be to test it. I don't have your program or hardware, so I'm pointing you to some Compatibility VIs. These are VIs that look exactly like Traditional DAQ VIs except that underneath they call the DAQmx driver instead of the Traditional DAQ driver. If your device works when you substitute these Compatibility VIs in for the Traditional DAQ VIs, then you'll know the M Series boards will work for you.
Here is the link for information about the Compatibility VIs:
http://digital.ni.com/softlib.nsf/954feaeea92d90918625674b00658b
83/9d67f671bcc6850586256e630059308b?OpenDocument
Let me know if you have any further questions or if this does not resolve your issue.
Thanks again and have a great day!
Chad AE
Applications Engineer - National Instruments

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

We are trying to determine why alert boxes are not modal
The fix states it's for Firefox 2.0 - 3.7a1pre
We are using 3.0.6 not the current version of 3.6.13.
Add-on release notes 2.16.1
https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
with respect to the window/dialog that issued the alert.

Program not behaving the same after making it a JAR

Hello,
I'm developing a program using Eclipse and wanted to export a JAR file to test out. I was able to successfully make the JAR file and it does run, but not as expected. For example, I have the following code which opens up a JFileChooser and lets the user select multiple files to be stored in a JList (via a list model). When I run this from the IDE during development, it works as it should, allowing me to select multiple files from the JFileChooser and adds all of the files to the JList. However, when I run the JAR, it lets the user select multiple files but only adds ONE file to the list. Not only that, but it doesn't seem to be running my "loadComparePaper()" method after adding the item to the list model.
JFileChooser fileChooser = new JFileChooser(); // New JFileChooser
fileChooser.setMultiSelectionEnabled( true );     // Allow multiple files to be selected
FileFilter docFilter = new ExtensionFileFilter( null, acceptableFiles ); // "acceptableFiles" is an array of allowable extensions (not shown in this snippet)
fileChooser.addChoosableFileFilter( docFilter ); // Tell the JFileChooser to use my filter
int returnValue = fileChooser.showOpenDialog( null ); // Open the dialog; store result
if ( returnValue == JFileChooser.APPROVE_OPTION ) {
    File[] selectedFiles = fileChooser.getSelectedFiles(); // Get selected files; store in array
    for ( int i = 0; i < selectedFiles.length; i++ ) { // For each selected file..
     compareListModel.addElement( selectedFiles[ i ].getName() ); // Add file name to list -- getting stuck here!
     loadComparePaper( selectedFiles[ i ] ); // Call method to load this file (read it)
}It seems like it's not running the whole for loop, because only one item is being added to the list and it never reaches "loadComparePaper()". Again, it works during development in the IDE and I've tried exporting the JAR quite a few times to see if that was the problem, but the JAR itself is executing.
Any ideas? I'm baffled as to why it works while I'm testing it out in the IDE, but after I export the JAR it's not working properly. Do you think this has something to do with Eclipse? Has anyone else experienced a problem like this?
Thanks

ThomYork:
Thank you for the advice. I'm new to using JARs and foolishly forgot or didn't realize that I should run it from the console to check for errors. Well, it seems this is the problem: I'm using Apache's POI package and have it stored in the directory +/my_project/lib/poi/+. Within the +/poi/+ folder are 3 JAR files that my program references. When I run my app from within the IDE, I don't get any errors because I've included them in the build path. However, when I run my JAR, it can't find the classes -- it doesn't seem to be looking in the +/lib/poi/+ folder even though my JAR file is in the same root directory as the main class when I run it within the IDE (i.e., both my_main_class and my_main_jar are in the same level directory, and would need to look in the +/lib/poi/+ folder for the other packages).
So I guess my problem is... my JAR file doesn't "see" the path of the other packages I'm using. In Eclipse, I've configured my project to include these other packages in the build path (and also the "Order and Export" build path) so I thought it would include them, but that doesn't seem to be working.
Am I missing something? How do I include JARs in other packages / folders so that they work in my JAR?
Thanks again
EDIT: I see some other people on this forum experiencing similar issues and I noticed you've helped them out. I tried creating a manifest file, but that didn't work, either... just to be more specific, this is the error message I'm getting:
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: org/apache/poi/poifs/filesystem/POIFSFileSystem
        at OneToOne.loadSourcePaper(OneToOne.java:907)Edited by: ibanezplayer85 on Aug 14, 2008 10:19 PM

I have taken a 12 month membership for cc and photoshop. I now see that adobe are offering the same product for only $9.99 per month including lightroom, whereas I am paying $19.99 a month. Is it possible to change plans without any penility payments.

I have a monthly membership to Photoshop CS6 costing $19.99 per month on a 12 month membership. I now see that Adobe are offering the same product for only $9.99 per month. Is it possible to change plans with any extra costs to me. Thankyou

Hi rjmo
Yes, you can switch to the Creative Cloud Photography Plan without penalty.
Please check this doc for the differences between this plan and the Photoshop single app plan you have currently: Photoshop Help | Differences between Photoshop and Creative Cloud Photography Programs
Let me know if you wish to proceed with the switch and I can arrange it.
Thanks
Bev

Personal area and EE subgroup of Infotype 01 and 77 are not the same. Help!

Hi All,
Good day.
I read your thread here and I guess we have a common problem. Can I ask for your help?
I run the program RPURACU0 to update the new race and ethnicity data in infotype 77. But why it changed the Personnel Area and Employee Subgroup. Only the race and ethnicity codes should have been changed and not the Personnel Area and Employee Subgroup.
Please help me what causes these discrepancies in data.
Example:
In PA20, enter personnel number 7600634. Personal area = US81 and EE Subgroup = U0. But when displaying infotype 77 the Personal area = US02 and EE Subgroup = U1.
The personal area and EE subgroup of infotype 01 and 77 should be the same. In this example, they are not the same. Please help me to find out what causes this problem.
Please reply asap because this problem should be solved immediately.
Thanks in advance.
Carina

Hi GRM,
Thanks for your reply.
I checked the date from the table and I found out that:
P0001-ENDDA not equal P0077-ENDDA
P0001-BEGDA not equal P0077-BEGDA
Please reply asap.
Thanks,
Carina

Hello can someone help me I have an iphone 4 and my daughter has an ipod touch we are on the same email address but somehow with in the last 25hrs all of my contacts are gone and only hers on on my phone is there a way for me to get all my contacts back?

Hello can someone help me I have an iphone 4 and my daughter has an ipod touch we are on the same email address but somehow with in the last 25hrs all of my contacts are gone and only hers on on my phone is there a way for me to get all my contacts back?

If you need assistance with finding any of your restores or attempting to restore from any that happened prior to his incident follow this article
http://support.apple.com/kb/ht1766
IF you do find a backup that has your contacts; I'd /highly/ recommand turning off your wifi network after the restore is finished because if the issue is with your iCloud your contacts may merge back with her's.
With iCloud you DO NOT want to share the account; bad things happen Evil evil thigns...
But in all seriousness; if two devices have the same iCloud; iCloud is told to merge and sync infomation between hte two and can't tell that it doesn't belong to the same person

Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5

co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5

Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down.

Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down instead of returning to video playlist.
Restarting videos works and looks like video is getting deleted.
Just a bug report

You might want to report that to Apple instead of to the other users in this forum.
http://www.apple.com/feedback/iphone.html

I loaded in Lion - but my time capsule will not back up. I get an message: couldn't complete backup due to a network prolem. Also it says "make sure your computer and back up disk are on the same network, and that the backup disk is turned on.

I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the backup disk is turned on. Then try again to back up. I have time capsul turned on. bill

I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.

After upgrading to 5.01, songs in my playlist no longer are in the same order as on itunes. I want to at least list them by the most played first not some random Apple order.

After upgrading to 5.01, songs in my playlist is no longer are in the same order as on itunes. I want to at least list them by the most played first not some random Apple order.

Not sure why this is happening and it is a pain. Once the Purchased list sorted by 'date added' go to the left most column and select the top - in my Purchased list the new items go to the bottom and I drag them back up to the top position.
MJ

My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

you can change the accounts of different apps in the phone's settings menu.

Determine if program are in the same Unit of Work

Similar Messages

Maybe you are looking for