Determine number of cached credential logins remaining?

Is it possible to determine how many cached credential logons have been used? (or are remaining?)
i.e. AD joined Windows 7 Pro laptop, configured for use whilst disconnected from the network.
Cached logon information is controlled by the following key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\Current Version\Winlogon\
ValueName: CachedLogonsCount
Data Type: REG_SZ
Values: 0 - 50
So, this is set to the value we require. We want a way of determining how many remain...
Quite happy to run a utility or script
Grateful for any methods or suggestions
Thanks
David

Hi,
Like you post above, that registry can change the number of previous logon attempts that will cache.
The valid  range of values for this parameter is 0 to 50. A value of 0 turns off logon caching and any value above 50 will only cache 50 logon attempts. By default, all versions of Windows remember 10 cached logons except Windows Server 2008.
For more information, read this reference:
Cached domain logon information
http://support.microsoft.com/kb/172931
Karen Hu
TechNet Community Support

Similar Messages

  • I am trying to locate an email that I deleted and assume should be in the trash.  However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for

    I am trying to locate an email that I deleted and assume should be in the trash.  However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.

    StevieJ wrote:
    I am trying to locate an email that I deleted and assume should be in the trash.  However my trash now only goes back a few days - how can I increase the number of days the trash remains accessible for.
    Check Mail Preferences, Accounts tab. Select the account, then the Mailbox Behaviors tab. See if you have it set to Permanently erase deleted messages when: One week old. (or less)

  • Determining number of teenagers living in a street

    I'm creating a java program to determine how many people are in a street, and how many of those people are teenagers. The information is gathered from an input file which is featured below.
    INPUT FILE*
    12 20 13 19 34 80 0 14 75 17 50 1 11 11 30 90 15 16 70 50 -2
    CODE*
    /* Session7A07.java */
    /* Determines number of teenagers living in a street */
    import java.util.*;
    import java.io.*;
    public class Session7A07
      public static void main (String[] args) throws FileNotFoundException
       /* variable declarations */
       int    age,
              people_count,
              teenage_count ;
       File age_file = new File("Session7A07.txt");
       Scanner age_data = new Scanner(age_file);
       age = age_data.nextInt();
       while (age >= 0)
          ++ people_count ;
          if (age >= 13 && age <= 19)
                  ++ teenage_count;     
          age = age_data.nextInt();
       System.out.printf ("Teenage Count = %d%n", teenage_count) ;
       System.out.printf ("People Count = %d%n", people_count) ;
    ERRORS_
    M:\>javac Session7A07.java
    Session7A07.java:23: variable people_count might not have been initialized
          ++ people_count ;
             ^
    Session7A07.java:25: variable teenage_count might not have been initialized
                     ++ teenage_count;
                        ^
    Session7A07.java:29: variable teenage_count might not have been initialized
       System.out.printf ("Teenage Count = %d%n", teenage_count) ;
                                                  ^
    Session7A07.java:30: variable people_count might not have been initialized
       System.out.printf ("People Count = %d%n", people_count) ;
                                                 ^
    4 errorsCurrently have 4 errors and would greatly appreciate the help.
    Thanks in advance.

    redfalconf35 wrote:
    int age,
    people_count,
    teenage_count ;the compiler doesn't like that you declared your variables but didn't initialize them to a valueTo expand on that: Member variables (those declared in the class, but outside of a method) are initialized with a default value if you don't explicitly initialize them. Variables declared in a method aren't given a default value, so if you use them without first setting their value, the compiler complains. Your while loop's body isn't guaranteed to be entered, so there's no guarantee that your variables will be set before use.

  • Adobe Document Service UsageRights Credential login error -Alias not found

    Hi all,
    I'm having exceptions while running my Adobe form as a web dynpro component. In the exception, it was stated that there was a credential login error, alias was not found. However, I followed the configuration guide and included the Alias "Reader Rights" and password given by SAP while applying the .pfx in the Visual Administrator->Document Services Configuration->credential tab
    I'm able to see my .pfx file with alias "ReaderRights" and my password entered in the tab. Does anyone know why am I still getting this error ??? I have restarted service PDF Manipulation Module and also the system.
    Root Cause
    The initial exception that caused the request to fail, was:
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Processing exception during a "UsageRights" operation. Request start time: Fri Jan 19 17:55:47 GMT+08:00 2007 com.adobe.ProcessingError: Credential login error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_EP0_16345250\DM-7099310722481871278.dir\DM7638611721496852750.tmp Specific error information: $$$/PDF/PDFCredentialLoginFailure3=alias ^0 was not found ReaderRights

    Thanks! The problem has been solved! I had to restart the whole system(including server and J2EE engine) in order to fix the problem. Restarting the server alone doesnt help enough.

  • To determine number of months

    Is there any function module to determine number of months ,when i give two dates ,ie startdate and enddate .
    thanks in advance.
    ravi.s

    Hi,
    Check this.
    MONTHS_BETWEEN_TWO_DATES
    Laxman

  • Determine Number of Decimal Place using BigDecimal

    I was interested to have the following getNumberOfDecimalPlace function :
    System.out.println("0 = " + Utils.getNumberOfDecimalPlace(0)); // 0
    System.out.println("1.0 = " + Utils.getNumberOfDecimalPlace(1.0)); // 0
    System.out.println("1.01 = " + Utils.getNumberOfDecimalPlace(1.01)); // 2
    System.out.println("1.012 = " + Utils.getNumberOfDecimalPlace(1.012)); // 3
    System.out.println("0.01 = " + Utils.getNumberOfDecimalPlace(0.01)); // 2
    System.out.println("0.012 = " + Utils.getNumberOfDecimalPlace(0.012)); // 3
    I use the following code
        public static int getNumberOfDecimalPlace(double value) {
            final BigDecimal bigDecimal = new BigDecimal("" + value);
            final String s = bigDecimal.toPlainString();
            System.out.println(s);
            final int index = s.indexOf('.');
            if (index < 0) {
                return 0;
            return s.length() - 1 - index;
        }However, for case 0, 1.0, it doesn't work well. I expect, "0" as result. But they turned out to be "0.0" and "1.0". This will return "1" as result.
    0.0
    0 = 1
    1.0
    1.0 = 1
    1.01
    1.01 = 2
    1.012
    1.012 = 3
    0.01
    0.01 = 2
    0.012
    0.012 = 3
    Any solution?

    Please [don't cross-post!|http://stackoverflow.com/questions/2296110/determine-number-of-decimal-place-using-bigdecimal], it's considered rude. If you must do it, then at least link each post so that people can find out which answers you've already got in order to avoid duplicate work on our part.
    Please read [_How To Ask Questions The Smart Way_|http://www.catb.org/~esr/faqs/smart-questions.html].

  • Using MASSG to determine number ranges in NUMKR

    Hi,
    I am trying to get NUMKR to determine number ranges using reason for action(MASSG).  A new business unit is coming onboard and need to keep their existing staff numbers. Therefore two number ranges were set up. 01 for external and 02 for internal.
    A reason for hire action exists with the reason 99 - Data migration.
    NUMKR is set as follows.
    If MASSG = 99 and employee group = 1 then choose number range 01 otherwise if MASSG <> 99 and employee group = 1 then choose number range 02.
    However when running PA40. This does not work and it ends up always picking the otherwise option.
    Has anybody else experienced this?
    Thanks in advance

    Hi David
    There seem to be an error while setting the feature. You are adding another condition of EG=1 in the otherwise & that is probably causing an error. Can you set the feature as follows:
    Country Code = 99 > EG =1> MASSG = 99 --> 01 otherwise 02. And the otherwise that you get at the country code level =02 unless you have other country Molga's defined. Please check that all the employees that you are trying to get into the system initially are EG =1 else it will not work. After creating the feature & ensuring that the feature is error free, activate it.
    Regards
    UR

  • How to determine number of photos I have?

    I cannot find anywhere in Photoshop Elements where it tells the total of photographs I have in my collection.  The old version told this number in the lower right hand corner.  Is there somewhere in this newer version where I can find how many photos I have without having to count them?  Please help.  Thanks.

    Thanks so much Neale!!!
    In a message dated 2/19/2014 7:05:52 P.M. Eastern Standard Time, 
    [email protected] writes:
    Re:  How to determine number of photos I have?
    created by nealeh (http://forums.adobe.com/people/nealeh)  in Photoshop 
    Elements - View the full  discussion
    (http://forums.adobe.com/message/6137888#6137888)

  • How to determine number range for billing document based on company code ..

    Hi Friends!!
    can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
    Amit...plz help me!!

    Hi Amit,
    1. Define different Billing Document number ranges in  SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
    e.g.
    NO.  From number To Number    Current number  Ext
    A1   0930000000    0930999999
    A2   0940000000    0940999999
    A3   0950000000    0950999999
    2. Define a Ztable ZNUMB_RANGE as follows
    Comp. Code | Tax departure country | Billing Doc Type | Number Range
    100                IN                               F2                      A1
    200                IN                               F2                      A2
    200                US                              F2                     A3
    3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
    Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
    If found pass this number range value to us_range_intern.
    us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
    Let me know if you are clear.
    Thanks,
    Mandar

  • What is the difference between partition-count and the number of caches?

    What is the difference between partition-count and the number of caches in Coherence? Are they same?

    Those are totally orthogonal concepts.
    For more, look at this thread where I answered your other related questions and explain this, too:
    Where can I find the accurate definitions of these terms?
    Best regards,
    Robert

  • Determining Report Server Cache Size

    Hello all,
    I would like to know how we should determine the cache size of our report server. We're using Oracle Reports 9i.
    The default is 50 MB and we set it currently at 500MB. Most of our reports have less than 50 pages but may reach more than 100 pages.
    Thanks!
    Aleks

    Hello,
    In : Oracle® Application Server Reports Services Publishing Reports to the Web
    10g Release 2 (10.1.2)
    B14048-02
    3 Configuring OracleAS Reports Services
    engLife number Default: 50
    The number of jobs the engine can run before the engine is terminated, and, if necessary, a new engine is started. This feature is available to thwart memory leaks.
    By default, keep the default value (50).
    engLife=1 may be used in some special cases, where an error occurs after the first execution by an engine .
    Regards

  • How to determine number of records in recordset returned by stored procedure?

    In TestStand 3.0 I am calling an SQL stored procedure where the stored
    procedure returns a recordset. Everything appears to work (I can
    iterate through the recordset and see that the data is valid).
    However, I can not figure out how to easilly determine how many
    records are actually in the recordset. Unlike the 'Open SQL
    Statement' step, in the 'Data Operation' step that actually invokes
    the stored procedure, there is no 'Number of Records Selected' option
    to specify a TestStand variable to accept this value. I know I could
    iterate through the returned recordset incrementing a counter until a
    Fetch fails, but for larger recordsets, traversing the table multiple
    times would be quite time consuming
    . I am hoping to avoid this if
    possible. Is there an easier way to get the number of records in a
    recordset returned from a stored procedure call?
    Bob

    Bob -
    The cursor type of the ADO Recordset object affects whether the number of records can be determined. The Recordset.RecordCount property will return -1 for a forward-only cursor; the actual count for a static or keyset cursor; and either -1 or the actual count for a dynamic cursor, depending on the data source.
    Because ADO does not let me set the cursor type for command objects which is what a stored procedure requires, it is up to the data source to determine the type of cursor and the support for record count.
    Scott Richardson (NI)
    Scott Richardson
    National Instruments

  • Caching AD login credentials not working with 10.5.5

    Hello all,
    We are trying to add our Mac clients running OSX 10.5.5 as workstations in our Windows Domain (we are running AD in Windows 2003 native mode). I can add the Mac workstation to authenticate against the domain but login will only work if the Mac client is connected to our network.
    On a Windows laptop that is a member of the domain, if you are off the network and it can't reach a domain controller it will used cached credentials.
    I read that this should work in chapter 6 titled "Active Directory Integration" in the document linked off of Apple's site named "Leveraging Active Directory on a Mac OS X".
    Here is the link to that doc http://www.bombich.com/mactips/activedir.html
    Here are the steps I followed to add the Mac client to the domain.
    1. On the Mac go to "Applications" --> "Utilities"
    --> "Directory Utility".
    2. Click on "Services" and check off the Active Directory
    plugin.
    3. Double click the Active Directory plugin and enter in the
    following
    "Active Directory Forest:" Leave as default
    "Active Directory Domain:" wheatonma.edu
    "Computer ID:" computername_here
    View the Advanced Options and enter in the following.
    Under "User Experience" check the "force local home directory on startup disk" option.
    I selected the Create mobile account at logon field so that Mac users can logon
    with cached credentials when they can't reach a domain controller or are away from the network.
    I deselected the Require Confirmation field, because I want all the Mac users on this machine
    to use mobile accounts.
    Also uncheck the next option "Use UNC path from Active Directory to derive network home location"
    Also uncheck the "Default user shell".
    Under the "Mappings" tab check off "Map UID to attribute" and change the attribute to "sAMAccountName".
    Under the "Administrative" tab uncheck the option "Prefer this domain server".
    Also under this tab make sure the "Allow Administration by:" option is checked
    off and the following 3 entries should be added (along with the new owner of the mac)
    WC\domain admins
    WC\enterprise admins
    WC\bgibson
    Click "Bind" and it will ask you for the local admin's password, enter it.
    It will then ask you for the following
    Username: Enter in the domain admin username
    Password: Active Directory password for the user above.
    Computer OU: ou=wheatonmacintoshclients,dc=wheatonma,dc=edu
    Check off the option named "use for authentication" and uncheck the "use for contacts". Hit "OK".
    4. Exit out of the Directory Utility and reboot the computer. Login using the "other" name
    and enter in your domain username and Active Directory password.
    We do not want to setup an Open Directory and sync data from our domain controllers. All we really need is the ability for the Mac client to authenticate into the system.
    Thanks

    Hi Templeton, thanks for the suggestion. I had been on that site before. I had called Apple as part of our school's support package and they had suggested that we look at that site... I should have mentioned it earlier. I have the new 10.5.5 laptop binding to AD okay but only when it is plugged into the network. It still will not cache the credentials for when I am offline and trying to login.

  • Determining Number of Rows in a ResultSet

    Hi,
    Is there an easy way to determine the number of rows in a result set with TYPE_FORWARD_ONLY?

    > > Try ResultSet rs = statment.executeQuery(...);
    if(rs
    == null){ //result set is empty}That is incorrect... it should have read:
    ResultSet rs = statment.executeQuery(...);
    if( ! rs.next() )
    //result set is empty
    you're right!! copy/paste from executeUpdate( ) api documentation about statements....
    "a ResultSet object that contains the data produced by the given query; never null"
    here's the catch though: that will advance your result set, which will throw off your cursor in a while loop (used to parse the results). requires you to reset the cursor before processing the result set.

  • Without looping: Determine number of unique values in a set

    Hi all,
    I was wondering if anyone has any advice on determining the
    number of unique items in a set. For example:
    If I have an ArrayCollection
    public var someData:ArrayCollection = new ArrayCollection([
    {id:"1", color:"Red", value:5"},
    {id:"2", color:"Red", value:"4"},
    {id:"3", color:"Green", value:"17"},
    {id:"4", color:"Red", value:"3"},
    {id:"5", color:"Blue", value:"4"}]);
    What I want returned is just Red, Green, Blue
    but not Red, Red, Green, Red, Blue. Or even better would
    just be a number telling me how many unique values are in the set.
    I've spent hours digging through the asdocs but have not found
    anything that performs this type of analysis and I've typically had
    to resort to endless loops (which can affect performance when the
    data set is large).
    I would appreciate any words of wisdom.

    "shawn.yale" <[email protected]> wrote in message
    news:ghs5lo$fkb$[email protected]..
    > Hi all,
    > I was wondering if anyone has any advice on determining
    the number of
    > unique
    > items in a set. For example:
    >
    > If I have an ArrayCollection
    > public var someData:ArrayCollection = new
    ArrayCollection([
    > {id="1", color="Red", value="5"},
    > {id="2", color="Red", value="4"},
    > {id="3", color="Green", value="17"},
    > {id="4", color="Red", value="3"},
    > {id="5", color="Blue", value="4"}]);
    >
    > What I want returned is just Red, Green, Blue
    but not Red, Red,
    > Green,
    > Red, Blue. Or even better would just be a number telling
    me how many
    > unique
    > values are in the set. I've spent hours digging through
    the asdocs but
    > have
    > not found anything that performs this type of analysis
    and I've typically
    > had
    > to resort to endless loops (which can affect performance
    when the data set
    > is
    > large).
    >
    > I would appreciate any words of wisdom.
    You could use a GroupingCollection with a SummaryRow.
    HTH;
    Amy

Maybe you are looking for

  • Iogear multilink BT keyboard (Model: GKM611B) not working with my Mac's

    I purchased the iogear keyboard to work with both my iOS and OSX devices.  iOS devices work perfectly, but none of the computers I've  tried (Mac Pro and iMac's) 'discover' the keyboard.  Anyone got this keyboard working with their Mac computers?

  • Cant get cim to recognize jboss version

    I am baffled with this one as I've done this many times before n older versions of atg. This is with ATG 10.0.3 as I am trying to test some things with installation. When selecting application server JBoss, it tells me my version is invalid. -------E

  • App using Location Services

    I am having a problem with my iPad Mini Retina NOT using location services in my local weather app.  I have 2 iPads, the mini and an iPad 4 and the 4 uses location services just fine.  I have checked all the settings and they are exactly the same on

  • Help Error in RSQL module of database interface

    I have my RFC using OO. I can excute it in the ECC System, but when i using java to call the function , the error 'Error in RSQL module of database interface' return. I don't know why? If any help,  that will be great. in SM21 , there is it: BV5 Conv

  • One user split into two?

    A week ago, everything from my PowerBook seemingly vanished. But today, when I ran DiskWarrior, I discovered that everything from my user account was still preserved in the Users folder, but now I have two users in my Users folder. Just before it hap