Determine what release of Leopard OS X I have

How do I determine what release of Leopard OSX I have on our new iMac? Normally such info would be under the "Help" and "About" tabs at the top of the screen. I can't find this info ANYWHERE. What's the secret? Thanks.

have you tried clicking on the "about this mac" under the Apple (top menu bar)? The version should be right under Mac OSX in the resulting window.
If it's not, click on "more info" in that same window. This opens up System Profiler. Scroll down and click on Software; it should then tell you the system version.
Hope this helps.

Similar Messages

Unable to shut down imac. dialogue - The Finder can't quit because some operations are still in progress. How do I determine what operations are still running?

I have an iMac (Mid 2007) Intel with Mac OS Lion 10.7.4 For some reason I am unable to shut down my computer. The dialogue box says The Finder can’t quit because some operations are still in progress. How do I determine what operations are still running? I have no clue? Obviously not a sophisticated user.

Thank You! Solved my problem. Have a great week.

How do I determine what Mac OSX I have?

I downloaded the new firefox....it says my system will not support it BUT I cannot get the old firefox back and have lost the ability to use my old firefox.
I do not know how to determine what Mac OSX I have.....
I really want my old firefox back with all my bookmarks, tabs, etc.
Please help.
Laura

Another option to consider is to install the last Firefox 10.0.x ESR version as that version is more recent than the Firefox 16.0.2 version.
*http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/10.0.12esr/
*http://www.mozilla.org/en-US/firefox/10.0.12/system-requirements/
*http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/16.0.2/mac/

How can i determine what the most recent os my imac will run?

How can i determine what the most recent os my iMac will run?
Serial Number QP6*****VUW
Processor 2.16 GHz Intel Core 2 Duo
Currently running Version 10.5.8
<Edited by Host>

You CAN run 10.7, but I don't advise it, buy the 10.6.3 upgrade disk from the Apple Store online and then backup files off the machine and upgrade to 10.6.3., then Software Update to 10.6.8 would be the BEST option for your older hardware and it will run most all of your 10.5 software and be faster than 10.5 or 10.7.
If you go to 10.7 it won't run nearly any of your 10.5 software and you will have to buy all new ones for a machine that's getting a little bit dated, near it's end of life stage. 10.7 will slow your machine down, especially with low RAM.
http://roaringapps.com/apps:table
At your machines stage, the hard drive is getting old, the vents are clogged up with dust and it's going to cost a bit to get the drive etc upgraded. You can if you wish, but 10.7 really needs more RAM (4GB) and a faster hard drive.
But your still subjected to the video card going out etc.
IMO upgrade to 10.6.8 and stay there until the wheels fall off, then buy a new 10.8 machine being released after this summer or 10.9 machine.
Harden your Mac against malware attacks

Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

I agree with Grant. But to answer your question, that would be Word 2008. A quick search turns it up on sale at Amazon. You'll need to find it somewhere other than Microsoft itself, since MS stopped selling it when they released Word 2011.
http://www.amazon.com/Microsoft-Office-2008-Mac-Version/dp/B000WR2F2M

ADADMIN Relink Applications programs Unable to determine the release ...

Hi, Everyone -
Red Hat Enterprise Linux Server release 5.4 Beta (Tikanga)
ORACLE RDBMS Version 8.0.6.0.0
Oracle Reports Version 6.0
Oracle Applications Release 11
The Relink Application program process is erroring out ... Please assist
===================================================
OPTIONS:
Do you wish to proceed with the relink [Yes] ? Yes
Enter the name of your Oracle Applications environment file below.
File name [TSTERP2_dallindr187.env] : custom_TSTERP2.env
Reading product executable information...
Enter list of products to link ('all' for all products) [all] :
Generate specific executables for each selected product [No] ?
AD Administration can relink your Oracle Applications programs with debug
information. Oracle recommends that you do not relink your programs
with debug information unless asked to do so by Oracle Support Services.
Relink with debug information [No] ?
Relinking selected modules in Application Object Library.
You are running adrelink, version 115.28
==============================================================
Error:
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1409: grep: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1410: grep: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: which: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: file: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: grep: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1920: awk: command not found
ORACLE RDBMS Version 8.0.6.0.0
Oracle Reports Version 6.0
Oracle Applications Release
Unable to determine the release number.
Please make sure the file /tsterp2/appsvr/tsterp2appl/custom_TSTERP2.env is correct
adrelink is exiting with status 1
End of adrelink session
Date/time is Fri Apr 16 18:04:19 CDT 2010
Line-wrapping log file for readability ...
Done line-wrapping log file.
Original copy is /tsterp2/appsvr/tsterp2appl/admin/TSTERP2/log/adrelink.lsv
New copy is /tsterp2/appsvr/tsterp2appl/admin/TSTERP2/log/adrelink.log

Hi,
Error:
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1409: grep: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1410: grep: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: which: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: file: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: grep: command not found
/tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1920: awk: command not foundDid you source the correct application env file before starting the relinking (APPSORA<CONTEXT_NAME>.env file under $APPL_TOP)?
As applmgr user, what does the following return?
$ which gre
$ which awk
$ which file
Do you have the directory where those files are located in the PATH (issue "echo $PATH" to verify)?
Unable to determine the release number.
Please make sure the file /tsterp2/appsvr/tsterp2appl/custom_TSTERP2.env is correctDoes this custom env file exist? If yes, are all the entries correct in the file?
Regards,
Hussein

Is there a way of determining what element in an array is being clicked on?

Hi all. I would like to setup an event to determine what element in an array is being clicked on/hovered over. I think I tried this before and found it wasn't working due to limitations of LV 7.0. If this code already exists, it would be great if I don't have to do a scavenger hunt for the solution.
I think one possibility I nixed was to use the refnum of the elements to determine which one it is. IIRC, this is not possible because the refnum of the element is for the edit box only.
The second possiblity is to get the on click event, and somehow determine which element in the array it is. This doesn't sound too difficult as it should be a simple calculation, but may get in to some hairryness based on if the indicies are visible or not, and if I am using a new or old array with new or old control (calc would change based on boarder size of the controls). I might just simplify it by removing indicies and using older control set which has minimal boarder size.
And just for fun, can I force a tool tip to show up?
Thanks all,
A
Using LV7.0 on WinXP.

blawson wrote:
Been bitten by LabVIEW wrote:
I think one possibility I nixed was to use the refnum of the elements to determine which one it is. IIRC, this is not possible because the refnum of the element is for the edit box only.
Using LV7.0 on WinXP.
This is indeed possible, at least in the newer versions I use.
Take the array refnum from the click event data terminal and get a reference to the array element. This refers to the element that was clicked, but you do need to work out how to get the index. My method is to use property nodes to get the screen position and size of the element and the screen position and size of the array, as well as the array's Visible Index property. For each direction, take the quotient of the relative position of the element (account for padding!) over the size of an element.
I suspect that taking the mouse coords and comparing to the array's sizes in pixels is similar, although I trust my method for events that don't have mouseclicks (what coords does Array:shortcut menu selection(User) return if you used the keyboard?)
Here's an old version I happened to have open. I've posted about this before, I suspect I have a clearer version in my gallery. I use this method in my example code contest entry to work out which square of the chessboard is clicked.
Thank you for that one!
I am currently "locked up behind a down-rev fence" (working an old app in an old version) so I had not heard of that.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

How can I determine what computers are home sharing??

How can I determine what computers are home sharing??

Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing.

How Do I Determine What WUDFHost.exe is Doing and What It's Associated With?

Since around the time of the installation of Win 8.1 Update 1 I've had a couple of new WUDFHost.exe processes that run all the time. Today I saw one of them accessing data on a backup volume, which I assume was some kind of maintenance
activity - but I'm not sure.
My question is this:
How can I determine what these processes are doing, why they're here, and what they're associated with (i.e., what feature or device has caused them to be running). I don't suspect them of causing a specific problem - my system's running fine
- but I want to know why they're running.
Process Explorer shows them to have been started by these two command lines:
"C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-ae18c507-xxxx-xxxx-xxxx-ce7a84b73fb2 -SystemEventPortName:HostProcess-76f2d2b0-xxxx-xxxx-xxxx-25de41b0af65 -IoCancelEventPortName:HostProcess-52988628-xxxx-xxxx-xxxx-54018fc05bec
-NonStateChangingEventPortName:HostProcess-c981e37e-xxxx-xxxx-xxxx-a8bd344c5791 -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:8472fac1-xxxx-xxxx-xxxx-680353bbbc7f -DeviceGroupId:WpdFsGroup
"C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-af2e6f5b-xxxx-xxxx-xxxx-39a9cc13f6d4 -SystemEventPortName:HostProcess-45e89330-xxxx-xxxx-xxxx-9e76811e37aa -IoCancelEventPortName:HostProcess-3007f65c-xxxx-xxxx-xxxx-c6cdd5617944
-NonStateChangingEventPortName:HostProcess-efca4373-xxxx-xxxx-xxxx-cfc06fd83dee -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:f4aa6ef0-xxxx-xxxx-xxxx-d16f4eefddb2 -DeviceGroupId:WudfDefaultDevicePool
As you can see, their function isn't obvious from what's showing.
What tools can I used to delve further into what these are and why they're here?
Thanks for any help or wisdom you can offer.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

seems to me that you're about to dive down a rabbit hole for this one..
http://en.wikipedia.org/wiki/User_Mode_Driver_Framework
http://msdn.microsoft.com/en-us/Library/Windows/Hardware/ff557565(v=vs.85).aspx
http://blogs.msdn.com/b/iliast/archive/2009/06/09/umdf-debugging-videos.aspx
might need to ask more in the driver dev forums?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

What release level of code do you get when you download a disk image (ISO/IMG) of a click-to-run Office 2013 product?

I’ve asked a similar question to this on an Office Community Forum but nobody knows the answer. So
I was hoping that an IT professional responsible for installing and deploying Office 2013 might know.
If you download an installation disk image (ISO/IMG) of a click-to-run Office 2013 product from office.microsoft.com/myaccount (Account Options:
Install from a disc > I want to burn a disc), what release level of code do you get?
Now that Service Pack 1 is available, do you get a disk image with Service Pack 1 incorporated?
Or do you still get the RTM (Release to Manufacturing) level of code?

Diane, thank you for the reply.
I was hoping that someone who has downloaded a disk image since SP1 became available would be able to confirm that for a fact.
I have just found a good description of Click-to-Run on Technet that I didn't know existed. The link is: http://technet.microsoft.com/en-us/library/jj219427(v=office.15)
The article states:
"Click-to-Run products that you download and install from Microsoft are up-to-date from the start. You won’t have to download and apply any updates or service packs immediately after you install the Office product."
This statement is probably true if you click the Install button on office.microsoft.com/myaccount and install "in real-time" over the Internet. However, I know for a fact that it is not true if you order a backup disk (Account
Options: Install from a disc > I want to purchase a disc). All you get is RTM level code (15.0.4420.1017).
So I still feel uneasy about what release level you get if you download a disk image. I don't want to download what might be the better part of 1GB of code over the Internet only to discover it is back level.
Addendum (6 April 2014): I decided to perform an experiment. I looked at the size of the data on my backup disk which contains RTM level code. It is 2.04GB. I then went to office.microsoft.com/myaccount and clicked to download a disk
image of my Office 2013 product. The pop-up window that asks me whether I want to Run or Save the file informed me that the size of the file is 2.04GB!!! I cancelled the download. I strongly suspect that, if I had continued with the
download, I would have received the same RTM level code I already have dating back to October 2012. I think this is awful customer service. To some extent, I can understand the logistical problems of replacing backup disks lying in warehouses
waiting to be shipped. But I cannot understand why disk images on download servers cannot be refreshed quickly.

How can I determine what is the minimum SCN number I need to restore up to.

Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
For example: I do a database restore.
restore database ;
RMAN> sql 'alter database open read only';
sql statement: alter database open read only
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
I thought this query might provide the answer, but it doesn't
select max(checkpoint_change#)
from v$datafile_header
MAX(CHECKPOINT_CHANGE#)
7985876903
--It applies a bit more redo, but not enough to make my datafiles consistent.
recover database until SCN=7985876903 ;
Starting recover at 03/16/09 15:04:54
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
using channel ORA_DISK_5
using channel ORA_DISK_6
using channel ORA_DISK_7
using channel ORA_DISK_8
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=18436
channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
channel ORA_DISK_1: restored backup piece 1
piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
select file#
     , status
     , checkpoint_change#
     , checkpoint_time
     , FUZZY
     , RECOVER
,LAST_DEALLOC_SCN
from v$datafile_header
order by checkpoint_time
Thanks,
Jason

The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
Your alert.log should show the redo log sequence number at that time.
You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
A
LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
You can also query SCN_TO_TIMESTAMP -- eg
select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
Hemant K Chitale
http://hemantoracledba.blogspot.com
Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
added the LIST BACKUP command from RMAN.

Can I determine what clients are connected to my weblogic server?

Hi, is there anyway of determining what clients are connected to my Weblogic 8.1 server - I want this information to be generated for me, not by maintaining a list when clients login initially to the server.
Also is there any thing that gets fired when a client terminates prematurely - for example being killed by the task manager. I need to know this, so the server knows what users are currently logged in, to prevent a user logging in twice (via the same username login).
Cheers,
Ants.

Hi,
Cousld u send me a simple example to check my Weblogic server for EJB with client.
Iam struggling from last todays.
and also tell what software i should use for deployment of EJB of weblogic 8.1.
ur help highly appriciate by me
My mail ID: [email protected]
thanks,
AHOY

Could not determine BW release of logical system 'BWPCLNT100

after a BI systemcopy (production to development) we get the following
error when we run load jobs of type "delta load". full loads work fine
"Could not determine BW release of logical system 'BWPCLNT100'"
even if i start the deltaload from the R/3 system with transaction RSA3
with update mode "C" i get the same error . when i use update mode "F"
it works fine , but that's not the thing we want.
BWPCLNT100 is the logical system of the productive system .
we have changed all the logical system setting to BWDCLNT100 using
transaction BDLS and we have also changed all entries in RSBASIDOC,
RSISOSMAP, RSOSFIELDMAP,.... .
we have done several systemcopies in the past , they all worked fine
and without this error. this is the first copy in BI 7.00 .
are there any loadmodules which have to be regenerated with the new logical system name?
thank you for your help and kind regards hannes toefferl

Hi,
As you said you are getting error after system copy when you are doing the delta load and full load is working fine for you.
This mainly happens due to init disturbance in the source system.
I would suggest you to delete the init and rerun the Init from BW once again.
This should solve your problem.
Thanks
Mayank

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

Determine what release of Leopard OS X I have

Similar Messages

Maybe you are looking for