Dev Days Tutorials : Can't log into Apex and Can't connect to Ora server

Hello All,
I downloaded the pre-built Oracle VM from Developer Days. The setup works fine. I am now trying to follow hands on labs. There are a couple of things I am stuck at (at the very beginning).
1. The link to http://localhost:8080/apex does not work. Browser failes to connect. I suppose this is a required step continue labs.
2. In SQL Developer (I am familiar with this app), I can't create a connection. I tried using SYSDBA, SYSOPER as user names with oracle as password, but can't go anywhere. One of the items in lab is to unlock the account 'hr'. SQL Developer and sqlplus won't let me log in.
One of the things I noticed when the VM boots is a message saying Oracle Listener is not set up and (probably) won't be starting.
I would appreciate if anyone would help with items above. Thanks in Advance.
Ravi

I think the link is actually http://localhost:8888/apex well this one works for me anyway, using the Developer Day "Database App Development" downloadable VM

Similar Messages

Can't log into PowerShell and EAC on Exchange 2013 Server

I'm not sure why but I my Exchange PowerShell can't log into my Exchange server and I can't access the EAC
via localhost or the URL.
I did notice that I enabled HTTP Proxy in IIS and that I used Application Route Requesting with it but I went ahead
and reversed all those changes. I also noticed that the physical path for each sub-site in Default Web Site goes to the HTTP Proxy version of that folder instead of the ClientAccess one. I changed each folder to the clientaccess one but that didn't help. I
did some research on this and I saw that I had to enable the kerbauth in the modules area and I did that to. I restarted IIS and WebRM and that still didn't help.
The Exchange Management Shell error:
New-PSSession : [exchangeserver.domain.net] Connecting to remote server exchangeserver.domain.net failed with the
following
error message : The client cannot connect to the destination specified in the request. Verify that the service
on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more
information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
On the web when I try to access EAC on our URL and not localhost, I get this error:
400
Bad Request :(
The request sent by your browser was not valid
On localhost, I just get a page cannot be found.

Hello
tip:
Check Get-owavirtualdirectory | fl and Get-ECPVirtualDirectory | fl and make sure that you using “Form based Authentication” and “Basic Authentication”
and check Control Panel\All Control Panel Items\Credential Manager for saved password.
and http://goo.gl/IC5P4S
sorry my english

XISUPER can't log into IB and ID but log into SLD ok

XI 3.0 SR1 is up and running, I can log into RWB and SLD with user XISUPER and password, however when I attempt to log in with XISUPER and password after the webstart kickoff it says "Authorization error username or password incorrect"...however i have proven that it is correct because I can log into SLD and RWB with said user...
Has anyone seen this before?
Thanks
John Ryan

Hi John,
pls check the XIsuper has same pswd in SU01(abap stack)
and exchangeProfile(java stack) for IR and ID services. It you have changed the pswd at any said places you will face this kind of problem. First set the pswd in su01 and than in exchangeProfile.
have a great time
Satish

Can't log into iMessages and it tells me to go and check my internet connection after checking it and turning it on and off it still doesn't work for iMessage but when I go into safari and other apps it works please help!

Cant log into iMessage on myI ipad air and get the message " please check your internet connection and try again" and my internet is on and I can connect to it in other applications.

1. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
2. Make sure phone number or email address is correct
3. Restart iPad
4. Reset iPad. Hold the Sleep and Home button down (together) until you see the Apple Logo

I can't log into my account, can I contact a customer service rep at ee?

I'm unable to log into my ee account and I am abroad wanting to add roaming options (text and calls) asap.

Do you have an admin account on that Mac?

I can't log into iMessage and face time on my iPod touch.

I have tried to log in to it multiply times, but it never let's me log in. What can I do to fix this?

Try:
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting FaceTime
iOS: Troubleshooting Messages

Can't log into iMessage and FaceTime

Hi there.
I seem to be having a similar problem to a lot of people here where I get an error from both of these applications telling me to check my network and try again.
I have spent countless hours trawling the support forums and even spent an hour on the phone to apple support and nothing is working!!
I have a 2008 macbook alauminium unibody. 2.4ghz intel core 2 duo and 4gb ram, 250gb harddrive. It should be working! My brother has the exact same macbook as me and his facetime and imessage works perfectly well. I also have an iphone and ipod touch and both of these applications work on those on my wifi network. My flatmate has an imac running leopard which I can sign into facetime with but not on my mac.
Apple support put it down to my wifi provider but that can't be the problem if I can facetime and imessage from my iphone and ipod and the imac in the flat can use facetime!!!! Somebody please help!
Apple have been totally useless which i am very dissapointed with and I just can't sus it out!!!
Thank you!

HI,
On the cost I would have no idea.
It is supposed to be part of the process in replacing any of the main boards such as Graphics card or main Logic board (Or Motherboard in some older towers).
If you were the one that had the work done then you should have receipts and proof of what the Serial Number is and what work was done.
If the Mac is a refurb then who ever did that refurb should have "replaced" the Serial Number.
Failing you having any of those details you would just have to ask a Store or Apple Authorised Service Provider.
7:59 PM Friday; December 7, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IWeb says I'm not logged into iWeb and can't upload my website

Has anyone else had this problem? I recently reinstalled iWeb, and it says I'm logged out of MobileMe. When I click to login, my computer says I'm logged in to MobileMe, but iWeb still says I'm not. Any suggestions?
Message was edited by: charlesspinks

*(i do not have mobile me under the apple menu-maybe cuz of 10.4.11 so I went to sys pref>.mac>account and removed my password and user name and replaced it with a bogus one)*
Correct. MobileMe was still .Mac when 10.4 was released.
_Go to the Finder and go to Go > Utilities > Keychain Access
*(same here do not have keychain access under finder but found it under application>utilities>keychain access--- )*
Correct. It won't be under Finder. Rather when you are in the Finder (says Finder next to the Apple) you will see a "Go" menu. This has Utilities as a choice within it.
__Delete the MobileMe keychain (it has a little blue / white cloud next to it) and close the window
*( there were no mobile me or .mac keychain whatsoever-- hence nothing to delete)*
This is unusual. Sign in to the .Mac Pref Pane with your correct .Mac name / password. Then open Keychain access. You should have a entry here with the little blue .Mac globe. Delete it.
Then return to the .Mac Pref Pane and sign out.
Remove the following to the trash and restart the computer:
Your User > Library > Caches > com.apple.iWeb
In your case remove the entire "Caches" folder from this location. It will be re-generated upon restart.
Your User > Library > Preferences > com.apple.iWeb (There may be more than one of these. Remove them all.)
Now remove the plist.
Once the computer is restarted Go to Apple Menu > MobileMe and sign back in to your account.
Now do this.
If the same issue happens in iWeb at this point try the following:
_Go to your iWeb domain in Your User > Library > Application Support > iWeb.
_Duplicate your Domain by clicking on it and going to File > Duplicate.
_Right click / ctrl + click on the domain file (not the Domain Copy) and choose "Show Package Contents"
_Remove the file inside called something like "com.apple.Your .Mac Username.plist"
_Close the window and attempt to publish again.

HT201342 My company laptop is a dell. What website can I log into so I can access my mail.

I need help accessing my email account from a PC and I can't find the website that allows me access.

You can access your iCloud email at http://www.icloud.com and go to the Mail page there. Or you can set your Mail application up using the settings given here:
http://support.apple.com/kb/HT4864

Can't log into game center, Can't log into game center

My son has updated his game center and now it won't let him sign back in - when he puts in his apple id it asks him to create a new account and when he adds his nickname it says it's already associated with another account - this is driving me crazy can someone please help or he'll lose all his dragon vale progress - thank you

I had this problem when I recently upgraded my iPhone to iOS6. I had somehow ended up with two AppleIDs, and the one that I hadn't been using previously was asking for a nickname. I finally figured out that I was using the wrong account, changed it in the iTunes store settings for my phone (I assume there's an equivalent with the touch?) and was then able to access the Game Center and see all my dragons again. I managed NOT to have my blood pressure shoot through the roof at the loss of my little pixels.

Suddenly can't sign into Twitter and can't see answer on forum.

I was prompted to update Firefox and problem seemed to start then.
Used safe mode - worked once but not now.
Done reset but no difference.
Tried all suggestions I can find (cache, firewall, etc.) and none seem to make any difference.

Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Can't log into server after 10.5.5 update

After running the 10.5.5 update on our Intel Xserve, it keeps getting stuck at the login window. I typed in the correct admin login info, the window would go away as if it was going to the next step, then it came back again. All services are running fine and I can get on via SA and WGM (from another computer) but not to the Desktop (via Remote Desktop). I noticed every time I try to log on (correctly) as admin, the whole service would restart. I get this from the Terminal window while I ssh and logged in from another computer after hit the Log In button: Sep 16 11:23:17 server1 loginwindow[2249]: Unable to load Info.plist exceptions.
Any ideas? I am afraid to update the other Xserve now..... Thanks!

I have a similar problem, although with 10.5.4 rather than 10.5.5... Seems all services work, however, I can't log into the Finder.
I just set this server up 2 weeks ago, so was able to give the users back their previous server for the time being. However, after an hour on the phone with Apple, their techs have exhausted all ideas. Here's what I've tried so far with prompting from Apple...
1. boot from dvd, run permissions and disk repair
reboot. no difference
2. from a remote machine, access WGM, add new user, check home folders of existing users, check permissions, create another administrator user with a new home, try again with new user, no difference.
3. wipe preferences via Terminal: boot single user, mount -uw /, run mv /Library/Preferences /Library/Prefencesold
reboot. no difference
4. changed preferences back to where they were by removing new (rm), and renaming old (mv) - still no access to finder
5. suggested remotely installing 10.5.5 as last resort - this is the last idea the Apple technician had. I haven't done it yet.
It seems to be a corrupt finder or login issue more than a server issue as all services are running fine
6. In single user mode again, I tried a rm .AppleSetupDone which allowed me to recreate the server user and settings, but still did not allow access to the Finder.
7. One of the other techs here suggested safe mode, hadn't tried that. - still wouldn't allow me to log into the Finder
8. Tried boot from Disk Warrior DVD (latest version) - wouldn't boot
sigh...
Ideas anyone? I'm close to wiping and rebuilding this server, however the user permissions are a little bit intricate so it would sure be nice to get it running again.
thanks, Dave

HT4859 How do I log into icloud and see what is on it?

I can't log into icloud and see what I have on it

Go to icloud.com on your computer and sign into your iCloud account. (You can't do this on your iPad.)

I can't log into my iTunes account. I logger out a few days ago to trouble shoot because I was trying to redeem some iTunes cards but when i pressed redeem nothing happened. Now when i press sign in and then choose existing Apple ID, nothing happens

I can't log into my iTunes account on my iPhone 5s. I logged out a few days ago to trouble shoot because I was trying to redeem some iTunes cards but when i pressed redeem nothing happened. I then tried to log back in immediately afterwards. I was unable to do so. After clicking "sign in" at the bottom of the apps main page, it brought up another menu where I clicked "Choose existing Apple ID". After pressing this the menu disappeared and nothing happened. I tried this multiple times and received the same result each time. I tried the other available option of creating a new AP ID to log in with and that one worked perfectly fine. I am clueless as to why the log in for me is either not able to load or just completely blocking me from getting back into my iTunes account on my phone. Not only can I not listen to the music I currently have, but I cannot log in to purchase the new music that I wanted to with my unused iTunes gift cards

I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3

Exchange 2013 - Admins can only log into one ECP server

Simple run down of my environment:
• Two AD sites (Site1 and Site2)
• One 2008 R2 domain controller at each site (DC1 w/ FSMOs and DC2) running AD forest function level 2008 R2
• One 2012 Std server with Exchange 2012 Std CU3 at each site (EX1 and EX2) – CAS/MBX on both, No DAG
• Half of mailboxes on each server
Using https://webmail.domain.com for all of our internal and external virtual directories. Adding /OWA or /ECP will get you into the respective site from either internal or external.
All Domain Admin/Exchange Admin (Organization Management) do NOT have mailboxes. Those individuals can log into ECP from https://webmail.domain.com/ecp, or FQDN or IP of EX2 only. If John Smith has no mailbox then he must use:
https://webmail.domain.com/ecp
or
https://ex2.domain.com/ecp
or
https://10.16.109.31/ecp
If EX2 goes offline or they use https://ex1.domain.com/ecp or https://10.16.108.31/ecp then none of the admins can login and they get the following:
Use the following link to open this mailbox with the best performance:
https://webmail.domain.com/owa/auth.owa
X-FEServer: EX2
Date: 2/18/2014 10:37:42 PM
s ECP or the https://webamil.domain.com/ecps ECP.
They can access EMS from either server and run Get-ECPVirtualDirectory and it shows what we would expect:
– https://webmail.domain.com/ecp
– https://webmail.domain.com/ecp
Why can an admin with no mailbox only log into the ECP on EX2? What is forcing the login to EX2 only? How can I move that “forced login” to EX1 if we ever get into a situation where EX2 is having problems? What happened in Active Directory or Exchange that
made EX2 the primary login server for ECP and OWA? My FSMOs are located at Site 1…the same location where EX1 is located. The same server that I cannot log into ECP directly.
~Rick

Any admin that is mail enabled can then only log into the server that hosts his mailbox. Admins without mailboxes can only log into EX2. And again, all admins can log into https://webmail.domain.com/ecp unless one of the servers goes offline
and that's when the problems occur. Nothing obvious or unusual regarding mail flow. Done various internal and external tests and have not seen anything obvious or in the logs.
Yesterday's change that MS Support had me do was to delete the ExternalURL for the ECP virtual directories. No difference. So, my latest update from MS Support that requested me to try today's change...
set-owavirtualdirectory “owa (default web site)” -RedirectToOptimalOWAServer $false
After performing an IIS reset and making sure replication had completed there was no difference. So, I am now forced to wait till Monday for MS to respond if the pattern stays at one email per day.
Has anyone with multiple servers at different AD sites been able to log directly into the either server like I'm trying? I get this problem in my labs and I even had MS, while on the phone, remote in to make sure I was setting it up properly.
The guy on the phone never said if their labs do the same thing cause they don't have multiple AD sites in their labs. In my lab if I have two servers at each site then I can log into both servers at the site, but not the other site. It appears it becomes
site dependent then.
MS has taken numerous logs and they are acting like this is the first time they've seen this. Yet I can reproduce it with no problem time after time. I'll create new VMs and start all over from scratch and make this happen every time I create a new AD/Exchange
environment (it does take me a while to build all those VMs from scratch). No fancy GPOs to AD and no radical changes to the Exchange servers. Other than obvious config changes to make sure email can flow internally and externally, this is pretty much out
of the box.
~Rick

Dev Days Tutorials : Can't log into Apex and Can't connect to Ora server

Similar Messages

Maybe you are looking for