Develop Apps on Windows

Today I wanted to do some research into developing apps for the IPad.
So I went to the apple site to look what kind of development tools there where available.
Before using the SDK I needed to create a apple development account to become a registered developer.
To my dismay I discovered that these development tools can only be used if you have mac os x snow leopard.
I find a little bit absurd that i need to buy mac os x just to learn and start developing some application for the ipad.
So my question is: Is there any way to develop these apps under windows ??

No. The SDK is for Intel-based Macs only. The kit requires the frameworks only available in Mac OS X, among other reasons, for the simulator so you can test your app.
If you want to develop for any of the iOS devices, you'll need a Mac running Mac OS X. If you shop around, you can find an early Intel iMac or Mac mini quite inexpensively. It won't be the fastest, but it would be sufficient for developing iOS apps.
Message was edited by: Dave Sawyer

Similar Messages

Make a flashlight App for Windows Phone 8.1 (TorchControl not supported)

I want to develop a simple flashlight app for Windows Phone 8.1 (non Silverlight). I used the TorchControl but it returns a false when i tried to run on my Device
Here is the code i Used
private async void SwitchOn(object sender, RoutedEventArgs e)
var mediaDev = new MediaCapture();
await mediaDev.InitializeAsync();
var videoDev = mediaDev.VideoDeviceController;
var tc = videoDev.TorchControl;
if (tc.Supported)
if (tc.PowerSupported)
tc.PowerPercent = 100;
tc.Enabled = true;
else
res.Text = "not Supported";
Is there any other way to do that..
Thanks In Advance.
Gopal Kandoi

Hi Gopal,
I would also suggest you to try the solution from this post:
https://social.msdn.microsoft.com/Forums/en-US/329c40e7-fa9a-4a27-8347-b4a80100842e/cant-turn-on-lumia-1520-wp-81-flashlight-use-videodevicecontrollertorchcontrol?forum=wpdevelop
Start the video capture first and then start the torch control.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Telstra Air App For Windows 8.1 Phone

When will Telstra be providing an Air App for WIndows 8.1 phone?

I, for one, support this request - especially with the universal app situation and the developer tools available to help convert iOS and Android code to Windows, there really shouldn't be much blocking this app being released. By all means say you're not going to write a Windows Phone 8.1 app from scratch, but how about a Windows 10 Mobile universal app? This would run not only on phones, but also 3G/4G enabled Windows tablets. If your developers are not aware of these tools, please get them to take a look at developer.windows.com to be enlightened! Here's a link to the actual iOS and Android 'bridges' that can help migrate an app easily: https://developer.windows.com/en-us/uwp-bridges

How to make backward compatibility of windows phone 8.1 app for windows phone 7?

I developed windows phone 8.1 app which is in windows phone store. Now, i want to make this app compatible for windows 7 also. Is it possible, if yes then how?

It may be that you are using non-backward compatible capabilities in your Windows Phone 8.1 app(s).
Developers that want to develop for different OS's usually have platforms with the different OS's on them for developing applications so they work on each platform.
I suppose you developed for Windows phone 8.1 rather than Windows phone 7. Therefore your app runs on a different framework than a Windows phone 7 has as well as probably newer hardware with greater capabilities.
So you will probably need to purchase an older phone that came with Windows phone 7 in order to develop for. I couldn't find documentation like the last link below (App capabilities and hardware requirements for Windows Phone 8) for Windows phone 7
from Microsoft but maybe you can.
Windows Phone OS 7.1 - Developing a Windows Phone Application from Start to Finish
Types of Applications
The Windows Phone application platform provides two frameworks for developing applications:
Silverlight
The Silverlight framework supports event-driven, XAML-based application development.
XNA
The XNA Framework supports loop-based games.
Silverlight and XNA can also be combined in a single application.
The following table lists some of the criteria that you can use to determine whether you should use Silverlight or the XNA Framework for your Windows Phone application. With Windows Phone OS 7.1, you can combine Silverlight and XNA into one application.
For more information about Silverlight and XNA, see
The Silverlight and XNA Frameworks for Windows Phone. For more information about the application platform, see
Application Platform Overview for Windows Phone.
What's New in Windows Phone 8.1
Platform convergence with Windows Store apps
Windows Phone 8.1 introduces an important change in the Windows Phone developer ecosystem. In this release, Windows Phone converges with the Windows Store apps platform into a single developer platform that runs the same types of apps—Windows Runtime apps.
Platform convergence began in Windows Phone 8, which supports a small subset of Windows Runtime APIs, but which differs from Windows in many core areas. In Windows Phone 8.1, there’s so much more in common—a much larger API set, a similar app model
and life cycle, a shared toolset, a common UI framework—Windows Phone and Windows Store app developer platforms truly have become one, single development platform.
Of course there are still some small differences in behavior and supported features between Windows Phone and Windows Store apps. Some of these are the result of timing of the different product cycles, and they may not appear in future releases. Some differences
are the result of the different natures of phones and computers, their sizes, and the way people use them. We encourage developers to think in terms of Windows app development—developing for a single Windows Runtime, but targeting two different platforms on
phones and computers.
Required Tools for Windows Phone Development
App capabilities and hardware requirements for Windows Phone
8
La vida loca

VS2013 - I cannot deploy and debug windows phone 8.1 store app to windows phone device

Hello, I create a project from C#-> Store Apps -> Windows Phone Apps, but I cannot deploy my apps to my blue device. There was a error message show "Element not found". I can run the app from Blend, and found Blend package the app to Appx
file. Is any method that we can deploy store app into windows phone blue device directly and how to debug it on VS 2013?

Hi,
Welcome to MSDN.
I am afraid that this is not the proper forum for this issue, since this forum is to discuss and ask questions about the Visual Studio Debugging tools, Visual Studio Profiler tools, and Visual Studio Ultimate IntelliTrace.
Since your issue needs professional windows phone knowledge, and there is dedicated forums for windows phone development issues
Windows Phone Development forums, you could choose one of its sub forums depends on your issue like Tools
for Windows Phone development or
Developing for Windows Phone .
In addition, I did a research, you could check whether the following links help.
http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff402565(v=vs.105).aspx
http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff402523(v=vs.105).aspx#BKMK_Runanddebug
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do i download apple developer apps, specifically xcode

Hello,
I am trying to download a software developer's application called xcode (version 5) to a PC so that I can run it using OS X in a virtual machine (Oracle Virtual Box should work) and learn how to develop apps for iphones.   This is a free apple application. The problem I am having is that I cannot find a download link or button.   Yes, I have an apple id and I also am registered as an apple developer. I have tried using firefox 26.0 and IE 9. The OS on the PC from where I am attempting to download is windows vista basic 32 bit.
First, I went to http://store.apple.com/us and typed xcode in the search bar at the upper right of the screen. I did not see a link for logging in anywhere.
That search took me here: https://developer.apple.com/technologies/ and I see "download xcode" in the left panel.
I click it and it takes me here:   https://developer.apple.com/xcode/    It says "Download Xcode 5 for free."   Great, that's what I want. What do I click on to do it?   I see no dowload link so I clicked on the Downloading and Installation FAQs link and it took me here:   https://developer.apple.com/support/xcode/
Now I see "The latest version of Xcode is available as a free download from the Mac App Store. " ok lets click there ... and guess what? I'm back to square one again!!!     https://itunes.apple.com/us/app/xcode/id497799835?ls=1&mt=12
I also tried using itunes.   That only showed xcode BOOKS!
Can't somebody please explain to me the thought process in using the apple website correctly?   This seems to be the most convoluted and user-unfriendly site I've ever been on.   Full to the brim with marketing and promos but very little to guide the user.   I have an apple id and I did register as a member of the iOS Developer Program. I am a software engineer with 15+ years experience... not a rookie to download and use software! What am I missing here?
Thanks a lot for any help!
Randall
[email protected]

I found the answer which someone posted for an earlier version of xcode. Apparently, going to the "app store" per the instructions, will not work.
Instead, use the link below to the developer downloads page, click on the little white right arrow next to the app and it will expand. The download link (not obvious) is a very small blue link over to the right.   Tricky, apple, tricky.
https://developer.apple.com/downloads/index.action

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

How to distribute my windows phone 8 app and windows store app without publishing in the store

How to distribute my windows phone 8 app and windows store app without publishing in the store
any business license or enterprise license needed..
I am a windows developer talking behalf of my company i.e wipro
I have a question about the enterprise license and we are building an app for the limited users i.e our company employees and users and we do not want to publish in the store
How to release the app?
what are licenses etc needed?

Hi,
for developers distributing apps without Publishing in the Store, the sideloding Enterprise key license through volume licensing is required.
Starting May 1, 2014, customers who want to enable sideloading will be able to purchase an Enterprise Sideloading key for $100 through the Open License program.
An unlimited number of devices can be enabled for sideloading using this key.
thanks
diramoh

Developer Error: invalid window block name passed to set_window_position

Hi
I had Registered a Form in Oracle apps
After that i'm trying to open the form,then this message will be displayed
Developer Error: invalid window block name passed to set_window_position
in the PreForm Trigger I had written the code as apps.set_window_position('MY block name(MAIN_BLOCK)','MY window(MAIN_WINDOW)')
i had wriiten like that
but
After click on that Ok Button of the error message my form is Open
and My form is Also not having any Minimize,Maximize and Close Buttons
Please Tel me How should i resolve that Error and also how can i Get that buttons for the Form

I agree with Francios, you should ask your question in the General EBS Discussion forum.
in the PreForm Trigger I had written the code as apps.set_window_position('MY block name(MAIN_BLOCK)','MY window(MAIN_WINDOW)')You are using a Oracle E-Business Suite (EBS) framework procedure to set the window position, not the Forms standard Set_Window_Property built-in.
and My form is Also not having any Minimize,Maximize and Close ButtonsThese could be controlled by the APPS.Set_Window_Position procedure, but I'm not sure. It could simply be that you set (or neglected to set) the default properties of your Form's window the enable these buttons. More than likely, the APPS procedure is setting them. It's been too long since I worked with the EBS to say for certain. You really should ask your question in the General EBS Discussion forum.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to sideload a windows 8 app from Windows server 2012

Hi
I am developing a windows 8 app for my organization and we want to sideload form the server without installing on each client PC. The Client's PC are in a specific Organization Unit. Can Anybody assist me in getting this done please.
dotdazzle

you can sideload by using powershell, (e.g. Add-AppxPackage) which you can script, is that what you mean?
http://technet.microsoft.com/en-us/library/hh852635.aspx
http://technet.microsoft.com/en-US/windows/jj874388.aspx?ocid=wc-nl-insider
http://www.howtogeek.com/129535/how-to-sideload-modern-apps-on-windows-8/
You can use any method you like, to deploy/execute these powershell scripts, or there are other solutions like ConfigMgr or Intune (in case you might already have those available)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

App's windows exist but not visible

(No, this isn't a hidden app, or minimized window, or window on different screen (Mission Control))
About a month ago, windows in Microsoft Word (Office 2011) stopped being visible on the desktop, but are listed under the app's Window menu item.
This affects all windows in that app that I can generate (the initial choice window (sorta an Open File dialog), a window created by opening a Word document, & the app's preference window, Page Setup, Print, Properties, etc.).
If I choose to use the app's Minimize Window menu item, I see the window morph into the dock. If I then click on the window in the dock, it again visibly morphs onto the desktop only to disappear when it would normally show the full window.
The morphing window & minimized window appear to have the correct content.
Based on the morphing, the size of the invisible window easily fits on the monitor (either built-in or external).
The window does not show up in Application Windows (F10) or related window pickers.
This does not happen to Powerpoint or Excel, nor to any other app that I've noticed.
I logged in as another user on my computer and the Word windows work properly for that user.
Nothing relevant appears in any logs when I open a window in Word (Only log message is "Microsoft Word[2296]: GetScaledBatteryInfo is unimplemented and will be removed soon. Please stop using it.")
I know of nothing special that happened at the time I first noticed this, but I don't run Word daily. (Since the problem arose, I've been using Pages to view Word files.)
I've tried repairing permissions. I've also done a complete removal of Office 2011 (http://support.microsoft.com/kb/2398768), which includes deleting all the ~/Library/Preferences/com.microsoft* files, ~/Documents/Microsoft User Data directory, the /Application/Office 2011/ directory, the /Library/Application Support/Microsoft directory, Microsoft fonts, and more, with multiple reboots. After a full reinstall, the problem remains. This would seem to rule out Word itself or its preferences.
As a s/w developer (non-Mac usually), I'm pretty good at chasing down similar bugs, but I've not been able to find anything similar by searching here or by Googling.
Since it works for the other user, the problem likely is in my preferences somewhere, but not in the MS Word or Office preferences (since those were completely removed & replaced).
Any help would be appreciated.

Hi William,
Did you eventually find a solution to this issue, because I'm pretty sure I'm encountering exactly the same problem since a couple of days!

Is it possible to run labview app on windows embedded compact 7?

Hi,
I have a low cost single board computer from ICOP, running embedded compact 7 from windows. The board has all the features such as ethernet, usb, serial, vga etc. Is it possible to install labview runtime and run the labview developed apps on this platform?? If so please provide me the links to any related resources.
Thanks in advance
More details on the board here...
http://www.icoptech.com/SPARK
Regards,
Vipul

Thanks so much Gene. I really appreciate your time and suggestions.
Btw, should have been clearer as one couldn't imagine I meant that 5.5 (i.e. ancient one). The adobe website also has this info: Windows 8.1 compatibility for Adobe Photoshop version 5 which just says version 5.5 under compatibility. So it does seem possible indeed to run this but perhaps for someone more techie. Had a look at the thread re: 6.0 and tried to run it as admin. Tried copying the contents on the desktop and change the compatibility under properties (even ran compatibility trouble shooter under properties) - but in vain. Must be doing something wrong. Prolly easier to return the CD (:/)
If anyone could drop an idea in relation to how/where to buy a genuine and legal copy of a CS5/CS6 I woudl greatly appreciate. I bought the 5.5 off eBay and probably will search for the right version this time on there again. But it's a bit of a question mark for me in regards to how do I make sure that I buy a genuine licenced version which I can register with the Adobe.

How to run windows store app in windows tablet

Hi,
I am developing an windows store app I can run my app in local machine.How can i run my app on windows tablets. I am using ASUS windows 8 tablet .How can I connect tab to my pc and run myapp in tablet.
Thanks,
Alok

1) In Visual Studio, create an appx package (Project -> Store ->Create App packages -> Not for upload)
2) Zip up the folder of the app package
3) Send to target machine
4) Unzip app package
5) Right-click Add-AppDecPackage.ps1 -> Run with Powershell (must be an admin)
6) Follow prompts for install
7) Enjoy
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

How to run a jar app on windows start up

what classes can i use in java..
to run a java app when windows xp starts up and even to shut windows down...
what name are these classes under in the java libary..if there is any..

LeeHarvey wrote:
so i have to learn C# and C every thing.. to do any thing out side java...what about visual basic...Lee, VB6 ended support 4 years ago. Do you want to be a programmer or a burger flipper?
You could go with VB.NET except it is succinctly, SH1T! Even the poeple who wrote hate it so much they'd tell you to use C# instead. [reference required] Seriously, it's got none of the advantages of VB6, and all of the disadvantages. I think it was designed to fail.
C# is just like Java, except different ;-)
Actually Java and C# are match racing... That is the longer they are developed the more alike they become... ergo they're suffering the wind-tunnel effect... they're copying each others weaknesses. This is a car. This is a lunch box.
Java is still winning, which works for me, for now... when Java stops winning I'll swap boats quick as look at ya.
Cheers. Keith.

How to create android app from windows app ?

i have windows 8.1 app and windows phone app created by app studio. i want to use these app in android or ios. how can i convert them ?

Hi,
I think there is no way to do this without the effort of programming.
Ether you use a cross-platform tools like Xamarin or you implement your app seperatly for each platform.
http://appindex.com/blog/ten-best-cross-platform-development-mobile-enterprises/
Regards,
Markus

Develop Apps on Windows

Similar Messages

Maybe you are looking for