"Developer Error. The following errors were found in your file:
I reinstalled my OS and I am trying to install ?LabVIEW properly for the past two days and whenever I run the setup I am getting this error
""Developer Error. The following errors were found in your file:
1. Specified file not found: [Utilities] UpgradeManagerPostProcessor = Bin\niPie.exe
Correct the ini file and try again.""
Mathan Suggested me this thread .
In that thread Brain.T had given a zip file i put it in my bin folder and I am now able to install LabVIEW.But I am not able to install device drivers,vision,vision assistant.Help Please
So you are intentionally creating duplicate posts. You know as well as I do the difficulty in following threads when people post in several different places the same question, and not knowing which one to follow and respond to. In your case you posted the same question in 3 places.
Similar Messages
-
The following packages were added to your selection to satisfy dependencies
I'm going to install Oracle R12 and a few other things. I've applied all the required linux packages by hand previously and wanted to try the ULN to use the oracle validate package. I bought a network subscriiption, registered my server after installing OEL 5.5. It's a Dell R410.
Using the oracle_validate package does not apply all the dependent packages. What am I missing or doing wrong? I get the message I am missing dependencies no matter what I do. I thought that was the entire point of the packge to not have to apply all these packages by hand.
[root@vicr410 sysconfig]# up2date nox show-channels
el5_x86_64_addons
el5_x86_64_latest
el5_u5_x86_64_patch
ol5_x86_64_latest
el5_x86_64_oracle
I tried: up2date --install oracle-validated to install the required database packages. The resulting message is "The following packages were added to your selection to satisfy dependencies".
Testing package set / solving RPM inter-dependencies...
There was a package dependency problem. The message was:
Unresolvable chain of dependencies:
glibc-headers 2.5-49.el5_5.7 requires kernel-headers
glibc-headers-2.5-49.el5_5.7 requires kernel-headers >= 2.2.1
oracle-validated 1.1.0-6.el5 requires kernel-headers
The following packages were added to your selection to satisfy dependencies:
Package Required by
elfutils-libelf-devel-0.137-3.el5.x86_64oracle-validated-1.1.0-6.el5 elfutils-libelf-devel
gcc-4.1.2-48.el5.x86_64 oracle-validated-1.1.0-6.el5 gcc
gcc-c++-4.1.2-48.el5.x86_64 oracle-validated-1.1.0-6.el5 gcc-c++
gdb-7.0.1-23.el5_5.2.x86_64 oracle-validated-1.1.0-6.el5 gdb
glibc-devel-2.5-49.el5_5.7.i386 oracle-validated-1.1.0-6.el5 /usr/lib/libc.so
glibc-devel-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 /usr/lib/libc.so
glibc-devel-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 /usr/lib64/libc.so
glibc-headers-2.5-49.el5_5.7.x86_64 oracle-validated-1.1.0-6.el5 glibc-headers
libaio-devel-0.3.106-5.x86_64 oracle-validated-1.1.0-6.el5 libaio-devel
libgomp-4.4.0-6.el5.x86_64 gcc-4.1.2-48.el5 libgomp
sysstat-7.0.2-3.el5_5.1.x86_64 oracle-validated-1.1.0-6.el5 sysstat
unixODBC-devel-2.2.11-7.1.x86_64 oracle-validated-1.1.0-6.el5 unixODBC-devel
I tried to add the rpm oracle-validated-1.0.0-22.el5.x86_64.rpm using
rpm -ivh oracle-validated-1.0.0-22.el5.x86_64.rpm.
[root@vicr410 Server]# rpm -ivh oracle-validated-1.0.0-22.el5.x86_64.rpm
error: Failed dependencies:
/usr/lib/gcc/x86_64-redhat-linux/4.1.1/libstdc++.a is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libaio.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libc.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libodbc.so.1 is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib/libodbccr.so is needed by oracle-validated-1.0.0-22.el5.x86_64
/usr/lib64/libc.so is needed by oracle-validated-1.0.0-22.el5.x86_64
compat-gcc-34 is needed by oracle-validated-1.0.0-22.el5.x86_64
compat-gcc-34-c++ is needed by oracle-validated-1.0.0-22.el5.x86_64
elfutils-libelf-devel is needed by oracle-validated-1.0.0-22.el5.x86_64
gcc is needed by oracle-validated-1.0.0-22.el5.x86_64
gcc-c++ is needed by oracle-validated-1.0.0-22.el5.x86_64
gdb is needed by oracle-validated-1.0.0-22.el5.x86_64
glibc-headers is needed by oracle-validated-1.0.0-22.el5.x86_64
kernel-headers is needed by oracle-validated-1.0.0-22.el5.x86_64
libXp.so.6 is needed by oracle-validated-1.0.0-22.el5.x86_64
libaio-devel is needed by oracle-validated-1.0.0-22.el5.x86_64
libdb-4.2.so()(64bit) is needed by oracle-validated-1.0.0-22.el5.x86_64
libodbc.so.1()(64bit) is needed by oracle-validated-1.0.0-22.el5.x86_64
sysstat is needed by oracle-validated-1.0.0-22.el5.x86_64
unixODBC-devel is needed by oracle-validated-1.0.0-22.el5.x86_64Cool. That worked. All the missing packages were installed
[root@vicr410 ~]# up2date nox show-channels
el5_ia64_latest
el5_i386_latest
[root@vicr410 ~]# up2date --install oracle-validated
Fetching Obsoletes list for channel: el5_ia64_latest...
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching rpm headers...
Name Version Rel
oracle-validated 1.0.0 24.el5 i386
Testing package set / solving RPM inter-dependencies...
compat-db-4.2.52-5.1.i386.r ########################## Done.
compat-gcc-34-3.4.6-4.i386. ########################## Done.
compat-gcc-34-c++-3.4.6-4.i ########################## Done.
elfutils-libelf-0.137-3.el5 ########################## Done.
elfutils-libelf-devel-0.137 ########################## Done.
elfutils-libelf-devel-stati ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-4.1.2-48.el5.i386.rpm: ########################## Done.
gcc-c++-4.1.2-48.el5.i386.r ########################## Done.
gdb-7.0.1-23.el5_5.2.i386.r ########################## Done.
glibc-devel-2.5-49.el5_5.7. ########################## Done.
glibc-headers-2.5-49.el5_5. ########################## Done.
libXp-1.0.0-8.1.el5.i386.rp ########################## Done.
libaio-devel-0.3.106-5.i386 ########################## Done.
libstdc++-devel-4.1.2-48.el ########################## Done.
oracle-validated-1.0.0-24.e ########################## Done.
sysstat-7.0.2-3.el5_5.1.i38 ########################## Done.
unixODBC-2.2.11-7.1.i386.rp ########################## Done.
unixODBC-devel-2.2.11-7.1.i ########################## Done.
libgomp-4.4.0-6.el5.i386.rp ########################## Done.
Preparing ########################################### [100%]
Installing...
1:unixODBC ########################################### [100%]
2:libgomp ########################################### [100%]
3:sysstat ########################################### [100%]
4:libXp ########################################### [100%]
5:gdb ########################################### [100%]
6:elfutils-libelf ########################################### [100%]
7:compat-db ########################################### [100%]
8:libstdc++-devel ########################################### [100%]
9:glibc-headers ########################################### [100%]
10:glibc-devel ########################################### [100%]
11:unixODBC-devel ########################################### [100%]
12:libaio-devel ########################################### [100%]
13:compat-gcc-34 ########################################### [100%]
14:gcc ########################################### [100%]
15:gcc-c++ ########################################### [100%]
16:compat-gcc-34-c++ ########################################### [100%]
17:elfutils-libelf-devel ########################################### [100%]
18:elfutils-libelf-devel-s########################################### [100%]
19:oracle-validated ########################################### [100%]
The following packages were added to your selection to satisfy dependencies:
Name Version Release
compat-db 4.2.52 5.1
compat-gcc-34 3.4.6 4
compat-gcc-34-c++ 3.4.6 4
elfutils-libelf 0.137 3.el5
elfutils-libelf-devel 0.137 3.el5
elfutils-libelf-devel-static 0.137 3.el5
gcc 4.1.2 48.el5
gcc 4.1.2 48.el5
gcc 4.1.2 48.el5
gcc-c++ 4.1.2 48.el5
gdb 7.0.1 23.el5_5.2
glibc-devel 2.5 49.el5_5.7
glibc-headers 2.5 49.el5_5.7
libXp 1.0.0 8.1.el5
libaio-devel 0.3.106 5
libstdc++-devel 4.1.2 48.el5
sysstat 7.0.2 3.el5_5.1
unixODBC 2.2.11 7.1
unixODBC-devel 2.2.11 7.1
libgomp 4.4.0 6.el5 -
Error: The following translators were not loaded due to errors: ASP.htm has information duplicated b
Hi,
Recently my computer had problems, I had to install Windows7 instead of Windows Vista. I made a clean installation of Dreamvers CS4. I was able to Export all the sites from my old computer. But whenever I try to open any file for editing I have this pop-up error message:
The following translators were not loaded due to errors: ASP.htm has information duplicated by another translator.
Same error for ASP.Net.htm, ColdFusion.htm, Date.htm, FlashObject.htm, ICERegions.htm, JSP.htm, PHP_MySQL.htm, Server Model SSH.htm, Spry.htm, SpryWidget.htm, XSLT.htm and XSLTransform.htm
I saw several threads with similar error message, where the translators were invalid, while mine are duplicated by another translator. But I tried the fixes anyway.
I tried removing Configure folder, and WinFileCache folder. Didn't help. I also tried to create a new site and get all the files from the remote. Same problem.
Any help will be greatly appreciated.
ValentinaSorry for the bump, but this post helped me solve a simmiliar issue: "The following translators were not loaded due to errors: ColdFusion.htm: has configuration information that is invalid" everytime I try open any document in dreamweaver. As I don't program in cold fusion, I renamed the file to ColdFusion.bck and everything works for me again. I'm not sure what caused the issue, but thanks for pointing out where I can find translator files.
-Dreamweaver CS5.5, Windows7-64 -
Standard AGENT_IC fails to open with the following error
We have upgraded our crm system from crm 4.0 sp6 to CRM 2007. When i configured the default role in our development system we are getiing the following error
The following error text was processed in the system CRD : Syntax error in program CL_CRM_BOL_TX_MANAGER=========CP .
The error occurred on the application server BRGCRD01_CRD_10 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: START_UP of program CL_CRM_BOL_CORE===============CP
Method: INITIALIZE of program CL_BSP_WD_APPLICATION=========CP
Method: INITIALIZE of program CL_CRM_UI_FRAME===============CP
Method: DO_INIT of program CL_BSP_WD_APPL_CONTROLLER=====CP
Method: DO_INIT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Strangely in our sandpit system we didn't get this error. Authorisations are ok and all services are active
Look forward to your response on this
Thanks
EddieI have the same issue on Windows Server 2008 R2 SP1
>will fix it
in future release
What is the next release for my Windows Server? When will it be released? -
Hi Guys,
When I try to Brows Cube (SSAS 2005), I get below error (Sometimes):
TITLE: Microsoft SQL Server 2005 Analysis Services
Server: The operation has been cancelled.
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\674.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q23.0.prt\385.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
BUTTONS:
OK
and I think due to above Error, Index on a Particular Attribute (EMP_ID) of a DIMENSION DIM_EMP is getting dropped from FEW of the Partitions (Folders) and started getting new error:
TITLE: Microsoft SQL Server 2005 Analysis Services
File system error: The following error occurred while opening the file '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\688.DIM_EMO.EMP_ID.fact.map'.
BUTTONS:
OK
I followed the above path and did not find file 688.DIM_EMO.EMP_ID.fact.map in folder PARTITION_2013Q31.0.prt. Once I rebuild the Index (ProcessIndex) for this partition, I am able to See file 688.DIM_EMO.EMP_ID.fact.map.
But again when next time I get error "Insufficient system resources exist to complete the requested service", Then 688.DIM_EMO.EMP_ID.fact.map will be dropped and will not be available in folder PARTITION_2013Q31.0.prt.
Anyone had similar issue. Could you please share your experience and resolution if any.
Thanks Shiven:) If Answer is Helpful, Please VoteHi Shiven,
In your scenario, the issue occur at sometimes, right? Base on my research, the issue can be caused by that calculation estimate exceeded available memory. Possibly due to possible number of dimension members and sizes of keys. And 32bit environment didn’t
allow for any expansion to the SSAS memory space.
To avoid this issue, please try to use userva to fine tune the 3GB setting down to 2900 since /3GB is the likely
cause (has been for most other customers who encountered the same problem before). The KB Articles below discuss that setting in detail.
How to use the /userva switch with the /3GB switch to tune the User-mode space to a value between 2 GB and 3 GB
Regards,
Charlie Liao
TechNet Community Support -
I am getting the following error when I'm setting up the mailbox server as I'm currently doing a test virtual machine throughHyper-V, it seems to happen during the transport service phase of the installation which is 7/12
Do i know need a D:\ drive for the mailbox server to work? as in my test i only have a c:\ drive but no d:\ drive
Error:
The following error was generated when "$error.Clear();
if ($RoleProductPlatform -eq "amd64")
$useAttachMode = $false;
$fastInstallConfigPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\Installer";
$command = Join-Path -Path $fastInstallConfigPath -ChildPath "InstallConfig.ps1";
$fastDefaultDataFolderPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\HostController\Data";
$dataFolderPath = $fastDefaultDataFolderPath;
if ([System.IO.Directory]::Exists($fastDefaultDataFolderPath))
$useAttachMode = $true;
else
if ($RoleIsDatacenter -eq $true)
$preferredDataFolderPathRoot = "D:\";
if ([System.IO.Directory]::Exists($preferredDataFolderPathRoot))
$dataFolderPath = Join-Path -Path $preferredDataFolderPathRoot -ChildPath "ExchangeSearchData";
if ([System.IO.Directory]::Exists($dataFolderPath))
$useAttachMode = $true;
if ($useAttachMode -eq $true)
&$command -action a -dataFolder $dataFolderPath -silent;
else
try
&$command -action i -dataFolder $dataFolderPath -silent;
catch
$errorMsg = "Failure running SearchFoundation installconfig.ps1 - " + $_.Exception.Message;
Write-ExchangeSetupLog -Error $errorMsg;
&$command -action u -silent;
try
if ([System.IO.Directory]::Exists($dataFolderPath))
[System.IO.Directory]::Delete($dataFolderPath, $true);
catch
$deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath
+ " - " + $_.Exception.Message;
Write-ExchangeSetupLog -Error $deleteErrorMsg;
" was run: "Couldnít attach the data folder 'C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data'. Path doesnít contain old nodes belonging to the system 'Fsis'.".
Warning:
An unexpected error has occurred and a Watson dump is being generated: The following error was generated when "$error.Clear();
if ($RoleProductPlatform -eq "amd64")
$useAttachMode = $false;
$fastInstallConfigPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\Installer";
$command = Join-Path -Path $fastInstallConfigPath -ChildPath "InstallConfig.ps1";
$fastDefaultDataFolderPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\HostController\Data";
$dataFolderPath = $fastDefaultDataFolderPath;
if ([System.IO.Directory]::Exists($fastDefaultDataFolderPath))
$useAttachMode = $true;
else
if ($RoleIsDatacenter -eq $true)
$preferredDataFolderPathRoot = "D:\";
if ([System.IO.Directory]::Exists($preferredDataFolderPathRoot))
$dataFolderPath = Join-Path -Path $preferredDataFolderPathRoot -ChildPath "ExchangeSearchData";
if ([System.IO.Directory]::Exists($dataFolderPath))
$useAttachMode = $true;
if ($useAttachMode -eq $true)
&$command -action a -dataFolder $dataFolderPath -silent;
else
try
&$command -action i -dataFolder $dataFolderPath -silent;
catch
$errorMsg = "Failure running SearchFoundation installconfig.ps1 - " + $_.Exception.Message;
Write-ExchangeSetupLog -Error $errorMsg;
&$command -action u -silent;
try
if ([System.IO.Directory]::Exists($dataFolderPath))
[System.IO.Directory]::Delete($dataFolderPath, $true);
catch
$deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath
+ " - " + $_.Exception.Message;
Write-ExchangeSetupLog -Error $deleteErrorMsg;
" was run: "Couldnít attach the data folder 'C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data'. Path doesnít contain old nodes belonging to the system 'Fsis'.".
Hi
Most likely for these kind of issues its better you can delete the hyper-v machine and create a new os , ensure all the prerequisite are met and install the Exchange since this is a new installation.
But as a try you can try giving full access to the admin account to the data folder 'C:\Program
Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data'. which is giving the error and rerun the setup
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Sap Interface Issues - SM58- the following errors were found
Hi Experts,
Could you please tell me...why are the following errors coming in SAP EDI .
Caller Function Module Target System Date Time Status Text Transaction ID
C10IBBITSN IDOC_INBOUND_ASYNCHRONOUS SAPBC4X-LOG_L 16.09.2011 08:14:28 com.wm.lang.flow.FlowException: SQL0803 - Duplicat 0ADE2828A6C64E73055FAD
C10IBBITSN IDOC_INBOUND_ASYNCHRONOUS SAPBC4X-LOG_L 16.09.2011 08:14:29 com.wm.lang.flow.FlowException: SQL0803 - Duplicat 0ADE2828A6C64E73055FAD
C10IBBITSN IDOC_INBOUND_ASYNCHRONOUS SAPBC4X-LOG_L 16.09.2011 08:14:29 com.wm.lang.flow.FlowException: SQL0803 - Duplicat 0ADE2828A6C64E73055FAD
C10IBBITSN IDOC_INBOUND_ASYNCHRONOUS SAPBC4X-LOG_L 16.09.2011 08:14:30 com.wm.lang.flow.FlowException: SQL0803 - Duplicat 0ADE2828A6C64E73055FADSo you are intentionally creating duplicate posts. You know as well as I do the difficulty in following threads when people post in several different places the same question, and not knowing which one to follow and respond to. In your case you posted the same question in 3 places.
-
I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain -
After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server".
Anyone have any ideas?You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
6. I then rebooted the phone and launched the Photo Library.
7. The Library rebuilt it's self again and recreated the thumbnails.
8. The problem was fixed!!! Thank you M Bentley!
I hope this helps - this has been bugging me for 2 weeks.
Regards
Alijm23 -
I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.
Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.
-
I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG 36 KBother PNG
Attachments:
Broken Arrow on EXE.PNG 179 KB -
When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2 -
When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?
Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L -
After updating to iTunes version 10.5, every time I start the computer the following error message appears: AppleSyncNotifier.exe - Entry Point Not Found. Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? Please help
Thank you Allan123.
I have used iTunes 10.5.1 for a while without any problem but the other day I installed an application that wanted to restart my computer and iTunes did probably not shut down properly which probably caused the problems. I had to search for libxml2.dll though. Two other programs on my PC used a with the same name but I copied the one from the an Apple folder of course and pasted it where u suggested and after that everything was fine. I have no idea why this problem really occured without any real reason. But thanks for the solution! -
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
Maybe you are looking for
-
Change download columns from report
Hi! I have a report, with some columns and I'd like to change the columns when downloading as csv file. Let's say that I have a report with col1,col2, col3,col4 and some hidden columns: col5, col6, col7. When I download the file I'd like to have only
-
My Itunes freezes when I plug in my ipod and wont verify or sync
My Itunes freezes every time I try to plug in my ipod classic. It wont verify my ipod so it can't sync or update it. I have to shut down and restart my computer to get it to function at all. I have had my ipod for awhile and have had no problems with
-
File Download links on ADF pages
Hi All, My requirement is to display no. of document links in pages. I am trying to use <af:fileDownloadActionListener> . I am getting list of files/document while loading the page from backing bean and looping through it using <af:forEach>.. when i
-
Executing Oracle DB Procedure from JACL Script
May I know if JACL DBAdmin class has method to call stored procedures? I am able to call prepareCall() method from my jacl, however when I call preparecall() method by passing the procedure name as argument it is giving me below error may I know usag
-
Can I transfer pictures & video from an Android telephone to a Apple iMac or MacBook Pro? Thanks for any help!!