Developer roles in PI 7.3 Java only stack

Hi All,
Can anybody help me to findout what are the standard roles a Pi developer would need in Java stack?
What are the generic roles available?
What are the display only roles?
How to know what roles we need to give when we create a user in PI java stack? (I know it depends on thier need or what action they perform)
But is there anyway to find list of roles for developer, Administrator?
I'm okay with ABAP stack but Java roles are bit confusing.
Thanks for your help.

Hi,
You can refer the below links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2061257f-970c-2c10-3783-9821abb59991?overridelayout=t…
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Regards
Bhargava Krishna

Similar Messages

How to find Traces in SAP PI 7.3 java only stack

Hello Experts,
How to find the trace logs and pipeline steps in sap pi 7.31 java only stack, which we will get in below areas,
1. In sap pi dual stack , SXMB_MONI (abap stack) in window 1
2. In sap pi dual stack , monitoring--->integration engine--->message monitoring----> xml messages(data base)
I already found some blog related to the logging but i doesn't help to find the traces which we get in SXMB_MONI (window 1, trace)
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/09/18/tracing-in-sap-pi-731-single-stack
Your suggestions are highly appreciated.
Thanks & Regards,
Venkat

Hi,
In Single stack we go for ICO instead of classical configurations(Pipe line steps(SA,RA,RD,ID)).
Link you are referring is to find the display of traces that you put in your UDF or Java mapping or XSLT mapping .
If you want to see the traces/payloads of end to end flow ,then you can see the same either in your communication channel monitoring/receiver channel or via message monitoring/adapter engine-->message log
If you want to see payloads in the below steps .you can also do so by following the below link.
Message Staging and Logging Options in Advanced Adapter Engine of PI 7.3x
Processing Step
Description
AM
After mapping step, but before outbound schema validation
VO
After outbound schema validation
BI
After sender adapter processing, but before inbound schema validation
MS
Before mapping step
VI
Before scenario look-up step (check if scenario is local Advanced Adapter Engine based or dual-stack based involving Integration Engine)
Regards
Venkat

PI 7.31 Java only stack (PI and Orchestration package) post installation

Hi,
Recently we installed PI 7.31 server, i searched in sdn but i couldn't get any post installation steps.
Could you please provide PI 7.31 Java only stack (PI and Orchestration package) post installation steps.
Thanks,
Venkata Ramesh

HI Venkata Ramesh,
Ref: UPGRADE TO SAP NETWEAVER PROCESS INTEGRATION 7.3
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/505374f4-9cbe-2e10-a6b9-c74a22924d26
Regards,

Brtools - JAVA only stack

Do brtools work correctly with a JAVA only stack instance?
When I run brtools as ora<sid> it works okay.
If I run it as <sid>adm I get this error....
BR0801I BRCONNECT 7.20 (15)
BR0805I Start of BRCONNECT processing: cehehmlo.sta 2011-11-08 15.41.24
BR0484I BRCONNECT log file: /oracle/QJ2/sapcheck/cehehmlo.sta
BR0301E SQL error -2133 at location BrOraThrEnable-1, SQL statement:
'ENABLE THREADS'
BR0806I End of BRCONNECT processing: cehehmlo.sta 2011-11-08 15.41.24
BR0280I BRCONNECT time stamp: 2011-11-08 15.41.24
BR0804I BRCONNECT terminated with errors

Bill Fee wrote:
Do brtools work correctly with a JAVA only stack instance?
>
> When I run brtools as ora<sid> it works okay.
>
> If I run it as <sid>adm I get this error....
Yes, there should not be any problem in executing brtools with Java only stack.
Since you are on Redhad linux so the problem seems tricky. But still you can try the note mentioned by Orkun.
However, normally it is not recommended to use brtools with sidadm; orasid is the one which should be used and it is sufficient.
Thanks

Is there anything similar to DB13 in a JAVA only stack?

If I have an isntance that is not ABAP, and only JAVA, is there anything similar to DB13 that I can run?

No - but you can connect an ABAP system with DBACOCKPIT to the Java instance.
Markus

SAP JVM update to latest version in NW 7.31 Java only stack

Hi ALL,
Can I know what is the procedure involved updating JVM? As there is no JSPM in 7.31 what are the options to update?
I tried by extracting SAR file and changing version in parameter file but it wasn't successful. After changing to latest version Java stack has not started.
Are there any dependencies in updating JVM?
We have a portal system with different version of JVM, Does this has anything to do?
I would like to update from SAP JVM 6.1_35 to JVM 6.1_63.
Please help
Thanks,
Dheeraj

HI Dheeraj,
Please check the below information.
The below url provide step by step for updatint JVM
https://help.sap.com/saphelp_nwpi71/helpdata/en/06/2dc545743a4f98950eec3f33ee4027/content.htm
http://help.sap.com/saphelp_nw73/helpdata/en/06/2dc545743a4f98950eec3f33ee4027/content.htm?frameset=/en/f0/cec51dabd1461b87e4db9e3958710e/frameset.htm
http://scn.sap.com/docs/DOC-33488
Note :
Note 1133020 - How to import a SAP JVM patch into an AS Java
Hope it helps.
Reagrds,
Deepanshu Sharma

Is Netweaver CE Basically a Java only Netweaver install

I am being told the new version of Vendavo runs on Netweaver CE platform where as our current version is installed on a Netweaver Java only stack.

yes, NW CE is java only.

Table in PI JAVA only system & Report development in JAVA only system

Dear Experts ,
We are migrating from Dual to Single stack JAVA only PI system.
In Dual stack system all the message data are stored in ABAP table from which MONI pulls data .
But in JAVA only system how data is stored ..? and how to access those table ..?
we need a report to develop which will have these data .
Interface name
Date & time of run
Key Data (if possible would like to see key data from the run, for example po number, material number, part number, idoc number would all be considered key data)
Pass/Fail flag
Error Message (only required if the run failed)
How & where to write code to develop this report ...?
thanks
Shakif

Hi Shakif,
Look at this link:
Message details and AuditLog from Java Stack using Custom WebService
and this link about the Java Data Browser:
Open SQL Data Browser - Process Integration - SCN Wiki
Best Regards
Harald

Developer Role on Sneak Preview Java SP 16

Hi,
I tried to enable the Java developer role for the new installed sneak preview WebAS Java sp16. However, I couldn't find the Java developer role. Could anybody help me to resolve this?
thanks in advance,
Chao-sheng

no:_).
it was not in the last one. Download the new one .

Java Development Role problems!

I have tried to add the java development role to a users account. I have added the following roles:
SAP_JAVA_NWADMIN_CENTRAL
SAP_JAVA_NWADMIN_LOCAL
Apparently they are meant to get a new tab but it does not appear. Am I adding the right roles?

Hi Phil,
See this link for help
http://help.sap.com/saphelp_nw04/helpdata/en/e2/75a74046033913e10000000a155106/frameset.htm
First, You have to create a logger.xml file in the Logger folder of your portal component
Then get a hold of that logger and write to it:
ILogger pLogger;
pLogger = PortalRuntime.getLogger("my_logger");
pLogger.info("testing");
Then, you can find this Logger in EP6 under : System Admin > monitoring > portal > Logging Console
Hope this helps
h

Jav Developer role = Web Dynpro Content Explorer

Hi,
When i navigate to Java Developer role => Web Dynpro Content Explorer(Detailed Navigation) in portal I am getting following error. I am getting the same error in ESS and MSS pages also...

Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/pb/utils/RedirectData.
Exception id: 10:45_30/01/06_0023_2755950
See the details for the exception ID in the log file

When i look at log files ... I am getting the stack trace.

<< item 0 : >>#1.5#0002553A11CD00520000002D000A316000040B9554A2BD58#1138635904826#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#SMANCHAL#1017##nadcp949_LPD_2755950#SMANCHAL#107dd96091a711da84b30002553a11cd#SAPEngine_Application_Thread[impl:3]_0##0#0#Error#1#/System/Server#Java###Exception ID:10:45_30/01/06_0023_2755950
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:921)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:803)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: java.lang.NoClassDefFoundError: com/sapportals/portal/pb/utils/RedirectData
at com.sapportals.portal.appintegrator.layer.HTTPRenderLayer.getPageRedirectObject(HTTPRenderLayer.java:282)
at com.sapportals.portal.appintegrator.layer.HTTPRenderLayer.processLayer(HTTPRenderLayer.java:101)
at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java:173)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:71)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java(Compiled Code))
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java(Compiled Code))
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java(Compiled Code))
at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java(Compiled Code))
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:652)
... 23 more

Can you please help me with this...

Hi Gary,
> Now do I put this back in original directory
Rrrighty.
> do I need to add back .bak or leave as .par?
Leave as PAR. If the server starts, all .par files within this directory get deployed and in the case of success, .bak gets added. So .par.bak files are not deployed again on the next startup.
> do I need to delete original
> then add my updated version?
I think you don't need to delete the original, but just do it. If your changed .par file get deployed successfully, it will overwrite the old .par.bak anyhow.
But make a security copy of the orginal file for the case that you have changed the original PAR in some strange way
Hope it helps
Detlev

Where to find out the log file under java developer role

Hi,
I have some application created in NWDS. While running it after the PAR deployment and all. some exception is thrown. the exception iD is given. I was trying to find out wher the log files are located in the portal so that I can analyze the exception.
I think it is under the java developer role....but under that......I checked the log viewer tool and all.....but exactly where the log files would be located. so that with the exception ID , I can search and find out the log for the particular exception.
any ideas?
Thanks in advance.

Hi Steelman,
Use the search option in log viewer for this purpose. In the server it would be located in
usr/sap/sid/jc00/cluster/server0/logs
Hope this helps.
Regards
Bharathwaj

Developer role able to edit a shared report that he did not create

Hi,
It seems like user with "BI Publisher Developer" role is able to edit a report
in shared folder that he has access to.
Question: How can I create a user who can develop/create/edit his own reports,
and have view only access to some shared reports and
have edit access to some other shared reports?
i.e I want a scenario where there are 2 folders in Shared folder say FolderA and FolderB.
I want to create a user who is a developer such that he can create reports under My Folder
for his personal use and also be able to create/edit reports under Shared/FolderA,
but have only view-only access to Shared/FolderB
Thanks

Moderator Action:
Same reaction as with your other triple multi-post:
https://forums.oracle.com/thread/2576361
Do not multi-post.
That's the same as if you were a spammer.
This one is also locked.
Stay with your post that is in the New To Java forum space.
Stay in the New To Java forum space until you are not a novice any longer.

Abap+java OR java only for EP6.0

abap+java OR java only for EP6.0

Hi charles,
you question is not clear.
If I correctly understood you are you asking the skills required to work on EP6.0?
If it is so I cam more java skills required and if you want to develop customized iview you may require bit of ABAP too.
Hope it helps.
Regards,
B.Guru Subramaian

How to create role(s) in Web As Java?

Hi there,
Can you please tell me how to create roles and assign to a user in Web AS Java Standalone system? I know How to do it if it is Dual Stack...but not with Standalone java System?
Thanks In Advance
Kumar

Hello Kumar,
I guess by by dual stack you mean an ABAP+JAVA environment right?
Anyways, in a JAVA only schema, if you are using your user store as UME, you can create the roles in UME through the browser by logging in as J2EE_ADMIIN or a suer with equivalent authorizations.
on the other hand you can create J2ee roles in Visual administrator(VA). For that you need to login to VA and go to the service Security provider. There you will find the option to create roles. But please be advised that the actions (equivalent of authorizations in ABAP stack) should already have been defined by your programmers before you can go ahead with the task of creating roles.
One morething, each J2EE role can contain only one action.
Where as in UME roles you can group them together.
Regards,
Prashant

Developer roles in PI 7.3 Java only stack

Similar Messages

Maybe you are looking for