Developing the report

Hi,
I required a report with purchase order GR/ IR postings and vendor account how much paid to vendor and out standing balance
What tables is required how can I develop report
Please help me it is very urgent
I will assign points
Thanks
Radha

Hi,
Ask the abaper to write an query from the table S032 there you can find the option of last good receipt date and the last goods issue issue date.
consider the various good mvt in between these dates calcuate the diffence betwee the current date and the last good issue date, so that you can abel to get the stock list that is not moving for more than 60 days,120 days etc
You can also use MC46, MC50, MB5M - expiration date list . In case if that does not solve their requirement then you need take logic from client and you need to develop own report
pherasath

Similar Messages

Wants to develope the report of Budget, actual , Commitments & availa Bud

Dear SAP Gurus,
I want to develope the singlr report as follows,
I/p : Project defn / Top WBSE
Out put:-
Against whole project,
- Total Original budget
- Total Actuals
- Total Commitments
- Total Assigned value
- Total Available budget
I found the Total Original budget (Field name :- WLGEV) & Total Actuals(Field name:- WTGES) from table BPGE, but could not able to find out other fileds.
Can anyone guide me for balance work ? (Note:- Please note that I need to find out overall value against the Project & not against the lower level WBSE)
Thanks & regards,
Pradip

Take 'Project for selection as PRPS_PSPHI
Select all WBSE ie PRPS-OBJNR for which PSPHI is same. This was you select all WBSE for a project.
=========================================================
For Actuals:
pass all PRPS-OBJNR obtained earlier in RPSCO-OBJNR. Put a filter of RPSCO-WRTTP=4 (value type=4).
In resulting lines do a sum of values in RPSCO-WLP01 to RPSCO-WLP12
==========================================================
For total commitments:
pass all PRPS-OBJNR obtained earlier in RPSCO-OBJNR. Put a filter of RPSCO-WRTTP=21 & 22 (value type=21 Commitments from Purchase Requisition
22 Purchase Order Commitment).
In resulting lines do a sum of values in RPSCO-WLP01 to RPSCO-WLP12
=========================================================
Assigned Values=sum of actual+ Rem commitment (assuming u don't have NWA)
======================================================

How to develop a report with current price & the last price in the pre.yrs

hi ,
guys,
my client want a report to list of material with respective vendor and to make a price comparison betn the current price & the last price in the privious year.
can any one help how to develop the report, shall go for generic extrc.
thanks in advace.
ramnath

CR CR 2011 / "Crystal reports For Visual Studio 2010", you are correct.
Re. the database thinggy. You can connect to a database via ODBC, OLE DB or in some instances natively. Once a report is created you an change the datasource. A good sample app on how to do this is csharp_win_dbengine / vb_win_dbengine. A link to the samples is here:
Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
More info on connecting to dbs and changing them is in the developer help files:
SAP Crystal Reports .NET SDK Developer Guide
SAP Crystal Reports .NET API Guide
More info on CR APIs for .NET (applies to all versions of CR and VS):
Crystal Reports for Visual Studio 2005 Walkthro... | SCN
You can also use ADO .NET Datasets and in this way you handle the database connections in your app. A good sample is csharp_win_adodotnet (also available in VB) - same link as above.
More info on datasets:
Crystal Reports Guide To ADO.NET
Crystal Reports for Visual Studio .NET - Walkthrough - Reporting Off ADO.NET Datasets
For more complicated operations (e.g.; changing a report from ODBC to OLE DB, changing one table, etc., you will want to use the InProc RAS SDK that is also available in CRVS. Developer help files are here:
Report Application Server .NET SDK Developer Guide
Report Application Server .NET API Guide
Sample apps are here:
NET RAS SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
and here:
Crystal Reports .NET In Process RAS (Unmanaged) SDK Sample Applications
More info on RAS SDK:
How to Use The RAS SDK .NET With In-Process RAS Server
Lastly, do use the search box in the top right corner. I find simple search strings such as 'crystal net parameter' return best results (KBAs, Blogs, docs, wikis, discussions and more).
- Ludek

How to develope a report to view the contact

Hi,
how develope the report to view the contract details of the customers in a pariticular sales area are displayed.
please send me the coding

Hi unnamed,
Suppose you have an id that identifies your record.
Go to Report definiton, tab report attirbutes.
Select the id of your record.
Create a link to the page you want to go to.
Hope this helps.
If not, I suggest you to create a from with report, and analyze the way the wizard has generated it.
Leo

Develope a report with out using alv

REPORT OBJECT:
      The report to list the material quantities returned because of breakage or expiry date or for any other reason.for material the quantities are summed up
under expiry quantity ,breakage and other quantity for a particular month.
       above mentioned is the object of my report .
      please help me any one to develop the report with out using   ALV'S.

Hello Pravardhan
Your requirements are definitely demanding for an ALV list because all the calculations can be done by the user himself without any programming. The only thing you need to do is to collect all necessary data. In addition, all criteria for calculating subtotals/totals (e.g. month) must be available as separate column on the ALV list.
This is reasonable programming, anything else not. If the users have an ALV list they can easily adjust the layout to their specific needs without calling for a developer.
We should always develop our programs with a <b>strong focus on the user's perspective</b>.
Regards
Uwe

Problem in opening the report as pop up in live environment but working fine with dev environment

Post Author: venkateshvarakala
CA Forum: Deployment
Hi,
I developed the report in Crystal Report 9.0 ,in dev environment when I opened the report it is opening in same window and when export to word it is opening in new window but after deploying the application, when I do the same i.e expoting to MS word it overwriting the crytal report due to which I am not allowing me save the Word Document into hard drive( which is one of the requirement.) (When I expot the pdf it opening in the same window but allows you to save to hard drive).
My question is why this behaving differently in dev and deployment stages... It will be helpful if the opening of the report happens just like dev environment in all the case.. i.e opening the exported report in new window.
Please help in resolving this issue and guide me if need to write or configure.
Thanks,
Venkatesh V

Your having the problem in this particular case only or it is a general problem, that you are not able to close the session properly.
If that is the case, try with IE6 because rest does not support this portal feature perfectly.
Regards
Chander Kararia

I AM DEVELOPING THE Z-REPORT FOR SHELF AGEING MATERIAL

HI
USER WANTS Z-REPORT FOR SHELF AGEING MATERIAL WITH STOCK QTY AND STOCK VALUE.
I WANT TABLE NAME FOR SHELF AGEING MATERIAL REPORT.
SPECIALLY, FOR DAYS (REMAINING SHELF LIFE PERIOD FOR MATERIAL IN DYAS)

Hi,
Ask the abaper to write an query from the table S032 there you can find the option of last good receipt date and the last goods issue issue date.
consider the various good mvt in between these dates calcuate the diffence betwee the current date and the last good issue date, so that you can abel to get the stock list that is not moving for more than 60 days,120 days etc
You can also use MC46, MC50, MB5M - expiration date list . In case if that does not solve their requirement then you need take logic from client and you need to develop own report
pherasath

Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager

Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager?
when I check on Microsoft site it says
Reports are not upgraded when you upload a report definition file directly to the report server
or SharePoint site. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
When you open an .rdl file in Report Designer in SQL Server Data Tools (SSDT), if the report was
created for a previous namespace, Report Designer automatically creates a backup file and upgrades the report to the current namespace.
This is the only way you can upgrade a report definition file.
Now here is another confusing statement which says
You can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server
2012 report server and it is automatically upgraded on first use. The report server stores the report definition file in the original format. The report is automatically upgraded the first time it is viewed, but the stored report definition file remains
unchanged.
All I want to know is if I deploy a rdl made in 2008 r2 to 2012 will it work on the report manager of
2012?
<o:p>
</o:p>
Mudassar

I have tested this fucntionality and can confirm that ssrs 2008 r2 reports work when you deploy them on new ssrs 2012 report manager .
No Migration is required .
I didnt even moved report server dbs .All I did is just deployed reports on the report manager and it worked .
"You
can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server 2012 report server and it is automatically upgraded on first use. "
Microsoft needs to correct this the documentation is misleading
Mudassar

Develop the custom report on payload

Hi
I want to develop a report on the basis of payload in XI for eg i send some sales order ,
then sales order no ,time of sending ,receiving at the other end , success etc
Regards
Vijay

Hi,
The custom report that you develop will only be able to provide information that is accessible in the Integration Engine. i.e. say there is a message which has passed through IE but failed in the adapter, then as your program will extract the details from IE, you will get a success in the report where as it is actually failed in the AE. Hence i am not sure if there is a way to get the details that you want. However you can get the duration of execution and other details from Performance monitoring in XI. Not sure if this helps but i would suggest you have a look at that and check if it helps in anyway.
reward if helpful,
Sarath.

How to close the report background engine programatically in developer 6.0?

Friends,
We have developed our application using Oracle Developer 6.0 as front end and Oracle 9iR2 as a back end.
whenever the user is opening the application one session is creating after that if he runs any report the report background engine is started and that engine also creating one session. So, unnecessarily two sessions are opening for a single application.
So, how can we close the report background engine programatically after the report displays all the records?
Moreover, when the user close the application, the report background engine is still open. the user has to close the report background engine manually.
so how can we solve this issue?
Thanks
Sathyguy

i got this while searching but its not working.....
Problem Description
Starting reports using a RUN_PRODUCT on Windows platforms starts a
Reports Background Engine (RBE). After leaving the forms application the
background engine is still running and must be terminated by the user.
Solution Description
This is intendet behaviour.
To close the Background Engine programmatically use the Reports Runtime parameter
ORACLE_SHUTDOWN. E.g.
Perform the following actions to stop the RBE when closing the Forms
application:
1) Create a dummy report which only does e.g. a SELECT * FROM DUAL
This report has a DESTYPE=FILE and a DESNAME to e.g. C:\TEMP\DUMMY.OUT
2) In the POST-FORMS trigger add the following code:
DECLARE
pl_id ParamList;
BEGIN
pl_id := Create_Parameter_List('dummy');
Add_Parameter(pl_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'Yes');
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Run_product(REPORTS,'<<name dummy rapport>>',SYNCHRONOUS, RUNTIME,
FILESYSTEM,pl_id,NULL);
END;
Explanation
The Report Background Engine runs separately from the Forms application and
there is no direct relation between these processes. The Forms should signal
the RBE that is being closed.
When the Form is closed the POST-FORM triggers sends a dummy report to
the RBE. Since the ORACLE_SHUTDOWN=Yes parameter is used after running the
report the RBE is terminated.
A small side-effect of the solution is that a small file (5Kb) is created on
the file-system contaning the output of the dummy report.

Developed a report for the daily production done.

hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Developed a report for the daily production done.
thanks in advance,
radhakrishna

Hi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh

How to Develop the ABAP Reports in Business One

HI all;
am New to SAP Business One,
How to Develop the Z Reports in Business One ? like Normal ALV Reports and other??
Can we have the ABAP Editor and Other Transaction in Business One.
-Ravi

Hi Sharma,
Thanks for Your Replay,
This is what my requirement !.
Hi Experts,
Here we are integrating SAP Business One with 3rd Party tool. !!
We need to Develop Customize Report in Business one and These Reports Out Put Will Convert into XML Files (Third Party System Can Understand Only XML files) and stored in Application Server/ Presentation Server.
How to Develop the u2018Z/Yu2019 Reports in Business one ? Can we use SE38 (R/3 ABAP Editor and other T-codes) in Business One.? Or is there any tools to develop the Business One Reports ? How to Convert the Report out put into XML File?
Thanks,
Upender.

Hi, We are developing quite a few excel worksheet reports. The reports dont show the cells if contain formulas ( when opened in iPad or ipod ), is there any good solutions .

Hi,
We are developing quite a few excel worksheet reports.
The reports dont show the cells if contain formulas ( when opened in iPad or ipod ),
Is there any good solutions .
Thanks.

There is no version of Excel for iPads. iPads come with something that lets you view the contents of Excel files but it implements only the common easy features and there are (literally) hundreds of things you can do in Excel that it doesn't know how to show on the screen, including some functions.
If you intend to work with spreadsheets on an iPad I suggest you buy Numbers for iPad
http://www.apple.com/apps/iwork/numbers/
which understands more (but still not 100%) of the things that Excel does. It is so cheap that you can probably afford to buy a copy just to see whether it does what you want.
If you are doing things with spreadsheets and intend to be primarily working on iPads then I suggest you actually use Numbers on a Mac as well, rather than using Excel at all.

How to install the Report Queue Manager alone without the Developer suite

is it possible to install the Report Queue Manager alone without the Developer suite...
i want to install it in the clients machine... please if you have any idea...
thanks for the help...

I use a product called No Machine. http://www.nomachine.com/download.php which is a client which allows you to connect via a graphical interface remotely. Lots of people also use VNC, if you do this you may need to install the VNC server option on the HPUX box, then connect via the VNC client. You should really talk to your unix administrator how they want to do it.
If you have access to the HP machine do you know if it is started in graphical mode? If so you should be fine. It will require this mode.
Also as the root user us will need to execute the command
xhost +this allows user to remote connect to the UNIX box in graphical mode.
When this starts up you can start a terminal session.
you will need to set the display for the user that will start the install.
DISPLAY=:0.0make sure that the command
echo $DISPLAYreturns
*:0.0*everything should go from there.
Failing this you can do the silent install, refer to the installation guide for the options there.
cheers
James

Last GR date and lat GI date to be developed in the report

HI,
I want last GR date and last GI date to be developed in the report. I wl take the data from CKM3N.
Is there any easy way how to go about it?
Regards,

Hi there
1. Last GR date,If the material is a Batch amanged material you can get the last Gr date from the Table: MCHA-(Field) LWEDT..
if the material is not batch manged,, Hope we can ref the MSEG based on the Movement types( Inward )/Material/Plant/Location for the last GR..
2. For the last GI date- Same we can ref the MSEG based on the Movement types( Outward )/Material/Plant/Location for the last GI..
Hope it helps,,
Thanks
Senthil

Developing the report

Similar Messages

Maybe you are looking for