Error in "Run FlexPMD" in "Flex Builder 3"

I got the following error in my Flex Builder 3
Error: FlexPMD command line reference preference is missing
Can any one please help me in solving this error ..
with regards
aditya

Check out the instructions here:
http://opensource.adobe.com/wiki/display/flexpmd/FlexPMDEclipseplugin

Similar Messages

Internal Server Error When Trying to Open Flex Builder Tutorials

Anyone know what I need to set up to run the tutorials in
Flex Builder - get an internal error server (500) when trying to
open up the tutorials listed on the start page.
I can open, compile and run projects .
Thanks

well thats a real vague error that IIS can spit out and it
could mean anything. If you are using a server side script in
conjunction with the tutorials for some reason that i would start
by commenting it all out. If you are just getting that error when
just trying to access a static html file that resides whithin your
web root then i would open up IIS and check you permisions under
your default web site for that folder.

It got setting error on multiple locales under Flex builder

Hi, i try to build a multiple locales application with Flex Builder.
When I try to configure "Flex compiler":
i enter "-locale en_US,fr_FR -source-path+=/locale/{locale}" for additinal compilere arguments.
Then there are errors:
unable to open 'C:\eclipse\Flex Builder 3 Plug-in\sdks\3.2.0\frameworks\locale\en_US,fr_FR'
I already to generate fr_FR with "copylocale.sh en_US fr_FR"
May i know what happened?
Thanks

I solve this issue.
for manual compile with
-locale=en_US,fr_FR
But under Flex builder with
-locale en_US fr_FR

Error messages during install of Flex Builder

"the application has failed to start because framedyn.dll was
not found"
This pops up several times during the install on Windows XP
SP2. I found one solution online and replaced the dll in \system32,
but that didn't help. As a result, FB won't run. Is there a
solution? I didn't even see the dll mentioned in the
knowledgebase.

I uninstalled and shut down some processes on the machine.
Then I reinstalled, and the process completed normally.

FlexPMD view always empty (Flex Builder 4.5.1 in Eclipse 3.6.2 on 32bit WinXP)

I've installed the v1.2 all in one .zip and configured it as per http://opensource.adobe.com/wiki/display/flexpmd/FlexPMD+Eclipse+plugin after installing the plugin itself some time ago (back in v1.1 days). No updates are show right now as pending and the update site is enabled.
Although the CPD detector runs OK, when I right click a source folder and choose 'Run FlexPMD', the Flex PMD view remains empty. The PMD builder is enabled for the project too, no joy.
The eror log doesn't have anthing relevent, just :
eclipse.buildId=M20110210-1200
java.version=1.6.0_26
java.vendor=Oracle Corporation
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_GB
Command-line arguments: -os win32 -ws win32 -arch x86
Error
Wed Jan 04 14:20:20 GMT 2012
Unable to create menu item "com.adobe.ac.pmd.eclipse.toolbar.runCommand", command "com.adobe.ac.pmd.eclipse.flexpmd.runCommand.category" not defined
Any hints ?

Try changing the "Java command line" in the FlexPMD preferences to change the location of the temp folder to somewhere FlashBuilder has permissions... This can be done by including the -Djava.io.tmpdir="
C:\Documents and Settings\{user}\Application Data\Temp" or a similar directory.

ADT packaging with native extensions : permission denied error when running remote build.

Hi Team,
We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
ant -Djava.awt.headless=true -f build.xml buildPackage
When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
Can anybody please help how to get rid of this issue for nightly build using adt,jar?
Here is the error from build log:
buildiOSPackageWithNativeExtensionMac:
 [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
 [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
 [java] at java.lang.ClassLoader$NativeLibrary.load(Native Method)
 [java] at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
 [java] at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
 [java] at java.lang.Runtime.loadLibrary0(Runtime.java:823)
 [java] at java.lang.System.loadLibrary(System.java:1045)
 [java] at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
 [java] at java.security.AccessController.doPrivileged(Native Method)
 [java] at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
 [java] at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
 [java] at java.awt.Dimension.<clinit>(Dimension.java:70)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
 [java] at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
 [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
 [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
 [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
 [java] at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
 [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
 [java] at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
 [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
 [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
 [java] at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
 [java] at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
 [java] at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
 [java] at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
 [java] at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
 [java] at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
 [java] at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
 [java] at com.adobe.air.ADT.run(ADT.java:414)
 [java] at com.adobe.air.ADT.main(ADT.java:464)
Thanks,
Swathi.

Note: Before the above error that were two other errors .
1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
2) The build complained that dx could not be found.
The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

Urgent - Flex builder internal error

I am running into this Flex Builder internal error when I run a debug session
An internal error occurred during: "child count update"
This happens to me in my app which load a swf (AS2). This is a proxy swf I use to get AS2 to talk to AS3 swf.
If I remove the loader, then I do not have the error.
This is severely hampering my efforts to debug my app, for which thsi proxy swf is important. Has any one encountered this? Thanks

I got a similar error while...
var dataString:String = swfBA.toString();
for purposes of trying to obsufacate via String replace() to a SWF loaded into a ByteArray decompressed and deserialized for class name extraction, etc..
[Cause without it we're not protected!?! but that's another story about decompilers and code theft.]
Ultimately I'll look for another way another day, but I thought it might help you to mention it.
Oh Flash Builder 4 with latest SDK 4+ 64bit windows 7 and it's about a 4MB SW FFlex source.

Flex Builder shows one error at a time

Hi folks,
I am new to flex. I have written a sample application in ActionScript. When I tried to build the application I am not able to see all my compile time errors at a single time. Following is the brief summary of the Issue occured while building the sample application:
          - First time one compliation error is shown.
          - After fixing this compilation error
          - Another compilation error is shown.(remember this error exists even at first time also) (and so on)
Can't I see all the compilation errors at once (so that I can fix all my errors at one shot) in Flex Builder?
(Note: I have the 'strict' mode enabled for the flex project)
Thanks,
Vamsi

It depends on the error. If your error is confusing the heck out of the compiler, the compiler might not be able to reason about the rest of your source code, so it won't catch the rest of your errors. It also depends on the compiler--smarter compilers can show you more informative errors, or more errors at a time.
I've found that most of the time, FlexBuilder is pretty good at reporting multilpe errors. Unfortunately, when it's not, there's not much you can do.

Different behaviour air apps running in flex builder or standalone

Hello,
<mx:HTML location="
http://www.google.com"
id="myBrowser">
I try to get the mouse selected text in my browser with the
following javascript bridge :
myBrowser.htmlLoader.window.getSelection().toString()
That work fine when my apps is running throw the flex builder
IDE.
But when it running as a standalone on the same computer, I
get an empty string.
Do you know why ?
Thanks
Ben

Very helpful! Should be placed in the blazeDS docs!
Chris

Calling Webservice defined in SAP R/3 in Flex builder using mx:Webservice

Hi All,
I am calling R/3 webservices in Flex builder using <mx:webservice> tag. but the wsdl is not accepting additional parameters like &, = ....
when I try to run this code Flex builder is generating an error
<mx:WebService id="ws" wsdl="http://localhost.com:8088/sap/bc/srt/rfc/sap/Z_SIMPLE_TEST_WS?sap-client=030&wsdl=1.1"
 useProxy="false"
 result="handleResult(event)"
 fault="handleFault(event)" showBusyCursor="true" >
and when I remove the sap-client=030& and =1.1 from the wsdl, the program gets executed, however SAP is calling client 010 as that is the default client.
I would appreciate if anyone can tell how to pass the parameter sap-client=030 in Flex.
Thanks,
Madhavi
Message was edited by:
 Madhavi
Message was edited by:
 Madhavi

its because of the & sign. instead use it like below it will work.
Z_SIMPLE_TEST_WS?sap-client=030&emp;wsdl=1.1
in the above line replace 'e' in emp with 'a' (amp)
Raja

Building from flex builder vs ant task

I have a flex application written using flex builder. When I
build it and run it using flex builder, or create an air file from
flex builder and run that, then my application works just fine.
However, I would like people without copies of flexBuilder
installed to be able to build my application, so I am using the
flex ant task (flex-mxmlc) to build my application. As far as I can
tell I have the same configuration, and the same libraries included
in the ant task. However, when I run the air file generated by the
ant task nothing happens. If you look in the task manager, you can
see that the application is running, but the main window for the
application never appears.
I tried running the swf through a debug version of flash to
get some log output, and I am getting a bunch of exceptions, the
first of which is:
VerifyError: Error #1014: Class flash.display::NativeWindow
could not be found.
at flash.display::MovieClip/nextFrame()
at mx.managers::SystemManager/deferredNextFrame()
at
mx.managers::SystemManager/preloader_initProgressHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler()
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
It seems like it might not be finding the main flex library
(flexlib.swc), is that where that class would be? In my ant task I
have an include-libraries tag that points to that file.
Anyone have any ideas?

I experienced a similar problem (although the class that
could not be found was different for me). Googling around I found
someone who had a similar problem and claimed that using the
flexlib.swc library was the culprit.
The root of the problem is that the Flex SDK that comes
bundled with the Flex Builder has libraries (under frameworks/libs)
that are NOT included in plain free Flex SDK that you and I are
presumably using on our build machines.
When flexlib.swc is linked in, it causes certain classes to
be required at runtime. Apparently when you compile these classes
are linked in if available, but when they are not the compilation
still succeeds. Only you get a VerifyError when you run the thing.
What worked for me was to copy all the additional .swc files
found in my Flex Builder SDK's frameworks/libs directory to the
same directory on my build machine. Also you will need to copy the
additional files under frameworks/locale/en_US.
Rebuild and clear your browser's cache and it should then
work.

How can I create an executable with Flex Builder 3?

I'm working with Flex Builder 3 right now and I've run my
head into a brick wall. Here's the situation:
I'm creating a standalone application (runs in its own
window, not in a web page) and I want to run it on a computer that
does not have Flex Builder 3 installed. Help files and web searches
haven't directed me to the right answer, so I was hoping that
someone on this forum could help. Anyone know how to create a .exe
file or something else that can be run outside of Flex Builder?
Thanks a lot for any help!

quote:
Originally posted by:
rob_parkhill
Convert it to an AIR Application?
Thanks Rob,
This may be what I'm looking for, but I don't know enough
about the difference. I guess I should have pointed out that I'm a
complete Flex Novice!
Anyway, with Flex Builder, I created an MXML Application. I
went through all my various options again in Flex Builder and found
that under the project menu, I could export a release build in what
appears to be the format you mentioned. I managed to create a .air
file, but it is not a recognized file type on my computer. I tried
double clicking it and the built-in windows services couldn't even
find a possible way to run it. Am I missing some important step?
Thanks again.

Execute batch command from flex builder

When I click the "Run" button in Flex builder 3, I would like to execute a batch file. It seems like in the Run settings, it only likes html and flash files. Other file types open in a flash environment Anyone know of a workaround?

Have a look at External Tools and see if that does what you want.
On the main menu bar in Flex Builder there's an "External Tools" icon, click its arrow and select -> Open External Tools Dialog..
Or from the menu, select "Run" -> "External Tools" -> "Open External Tools Dialog..."
You can add a new configuration there and do all kinds of stuff (like creating docs using ASDoc, etc..)

Error while running C:\Program Files\Adobe\Flex Builder 3\sdks\3.0.0\samples\explorer\build.bat

Hello
I am a flex beginner, when i run the C:\Program Files\Adobe\Flex Builder 3\sdks\3.0.0\samples\explorer\build.bat file the following error is displayed
Loading Configuration file C:\Program Files\Adobe\Flex Builder 3\sdks\3.0.0\frameworks\flex-config.xml
C:\Program Files\Adobe\Flex Builder 3\sdks\3.0.0\samples\explorer\loaderPanel.mxml
Error :-1
Please help me to run the bat file, as it will help me to learn flex independently.
error message is attached as bmp.
Thanks in advance.

Hi,
Take a look at this report: https://bugs.adobe.com/jira/browse/FB-11626 It might be of help.
With best regards,
Barna Biro
Blog: http://blog.wisebisoft.com

[svn] 4917: Fix FB-16914: Flex Builder swallows some ADL errors if you click Run instead of Debug.

Revision: 4917
Author: [email protected]
Date: 2009-02-10 13:55:43 -0800 (Tue, 10 Feb 2009)
Log Message:
Fix FB-16914: Flex Builder swallows some ADL errors if you click Run instead of Debug.
Also, some debugger code cleanup.
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-16914
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/ILaunchNotification.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/SessionManager.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSessionManag er.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/ProcessListener.ja va

it's a beta. it stunk. but they put it out for review which helps Adobe and others. But never treat those products as stuff to base your serious work around. Flex3 is stable. FB4 is 90% reliable. Things are still broken in it.
btw if it was a leading university why in the world would they base it around a Beta that was buggy or was that your decision ?
now, since I helped, please give me my 5 or 10 points.

Error in "Run FlexPMD" in "Flex Builder 3"

Similar Messages

Maybe you are looking for