Device does not support 2.5 protocol
Hi, I'm trying to synchronise a Pearl 8100 to Notes using Desktop Manager v5.0.1.37 [Mar 10 2010] and its consistently crashing at the same point. Contacts complete fine, reads calendar from the phone, reads the Notes entries, then crashes. Synchronise Log file has following entry
[30000] (05/27 13:09:29.953):{0x1148} CXLB[CXLBWrapperImpl::Initialize@260] Initialize CXLB library
[30000] (05/27 13:09:30.125):{0x1148} [DeviceDatabaseAccessImpl::_refresh_databases] Device does not support 2.5 protocol.
[10000] (05/27 13:09:30.125):{0x1148} [DeviceDatabaseAccessImpl::_get_databases_summary] _refresh_databases failed. Error: 7
followed by further error messages.
Has anyone seen this one before, please?
Thanks,
BF
Hi,
Thanks for trying to use Firefox for android. We didn't get the tablet version finished for the release, but you can download the unstable version from http://nightly.mozilla.org until it is totally ready. Note that you'll need to enable installation of non-market apps and updates will not be automatic.
Best regards,
Michelle
Similar Messages
-
"DBSL does not support extended connect protocol" while configuring SSFS
Hi, I'm trying to configure ssfs on ERP EHP7 on HANA Database system. Doing it with this guide - SSFS Implementation for Oracle Database
But when I'm trying to test connection with r3trans I got following error in the log:
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL does not support extended connect protocol
4 ETW000 ==> ssfs won't be used 26 0.004936
I already updated DBSL_LIB to the latest version, but it doesn't help.
Here is full log:
4 ETW000 C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE version 6.24 (release 741 - 16.05.14 - 20:14:06).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 02.06.2014 - 13:49:16
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: C:\usr\sap\CM1\DVEBMGS04\exe\R3trans.EXE -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Mon Jun 02 13:49:16 2014 106 0.000106
4 ETW000 [ dev trc,00000] db_con_init called 36 0.000142
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000 61 0.000203
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 26 0.000229
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 17 0.000246
4 ETW000 [ dev trc,00000] Loading DB library 'dbhdbslib.dll' ... 46 0.000292
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEED100000
4 ETW000 3840 0.004132
4 ETW000 [ dev trc,00000] using "C:\usr\sap\CM1\DVEBMGS04\exe\dbhdbslib.dll" 21 0.004153
4 ETW000 [ dev trc,00000] Library 'dbhdbslib.dll' loaded 21 0.004174
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbhdbslib.dll 42 0.004216
4 ETW000 [ dev trc,00000] Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.22) 81 0.004297
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbhdbslib.dll 25 0.004322
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbhdbslib.dll 41 0.004363
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 47 0.004410
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000) 24 0.004434
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.004452
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000205F170) 22 0.004474
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.004491
4 ETW000 [ dev trc,00000] New connection 0 created 17 0.004508
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 38 0.004546
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141BAEDB0) 44 0.004590
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.004609
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 19 0.004628
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 24 0.004652
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 17 0.004669
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 164 0.004833
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3 34 0.004867
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=-1,command=74,arg_p=0000000000000000) 24 0.004891
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=15) 19 0.004910
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL does not support extended connect protocol
4 ETW000 ==> ssfs won't be used 26 0.004936
4 ETW000 [ dev trc,00000] { DbSlHDBConnect(con_info_p=0000000000000000) 31 0.004967
4 ETW000 [ dev trc,00000] DBHDBSLIB : version 741.10, patch 0.022 (Make PL 0.26) 34 0.005001
4 ETW000 [ dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10) 32 0.005033
4 ETW000 [ dev trc,00000] (0.022) Get database version via dbsl call (note 1976918) 24 0.005057
4 ETW000 [ dev trc,00000] (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
4 ETW000 32 0.005089
4 ETW000 [ dev trc,00000] (0.020) SQL DDL with data aging (note 1897636) 21 0.005110
4 ETW000 [ dev trc,00000] (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
4 ETW000 30 0.005140
4 ETW000 [ dev trc,00000] (0.014) Tablesize calculation for HANA optimized (note 1952609) 25 0.005165
4 ETW000 [ dev trc,00000] (0.014) Native SQL UPSERT with DataAging (note 1897636) 21 0.005186
4 ETW000 [ dev trc,00000] (0.014) DBSL supports HANA revision number up to 3 digits (note 1952701)
4 ETW000 27 0.005213
4 ETW000 [ dev trc,00000] (0.010) Quotes missing by FAE with the hint dbsl_equi_join (note 1939234)
4 ETW000 28 0.005241
4 ETW000 [ dev trc,00000] (0.007) Obsere deactivate aging flag (note 1897636) 24 0.005265
4 ETW000 [ dev trc,00000] (0.007) Calculated record length for INSERT corrected (note 1897636)
4 ETW000 27 0.005292
4 ETW000 [ dev trc,00000] 15 0.005307
4 ETW000 [ dev trc,00000] -> init() 21 0.005328
4 ETW000 [ dev trc,00000] STATEMENT_CACHE_SIZE = 1000 181 0.005509
4 ETW000 [ dev trc,00000] -> init() 505 0.006014
4 ETW000 [ dev trc,00000] -> loadClientRuntime() 27 0.006041
4 ETW000 [ dev trc,00000] Loading SQLDBC client runtime ... 19 0.006060
4 ETW000 [ dev trc,00000] SQLDBC Module : C:\usr\sap\CM1\hdbclient\libSQLDBCHDB.dll 779 0.006839
4 ETW000 [ dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.68 Build 0384084-1510 74 0.006913
4 ETW000 [ dev trc,00000] SQLDBC client runtime is 1.00.68.0384084 45 0.006958
4 ETW000 [ dev trc,00000] -> getNewConnection() 28 0.006986
4 ETW000 [ dev trc,00000] <- getNewConnection(con_hdl=0) 78 0.007064
4 ETW000 [ dev trc,00000] -> checkEnvironment(con_hdl=0) 34 0.007098
4 ETW000 [ dev trc,00000] -> connect(con_info_p=0000000000000000) 27 0.007125
4 ETW000 [ dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ... 62 0.007187
4 ETW000 [ dev trc,00000] -> check_db_params(con_hdl=0) 61365 0.068552
4 ETW000 [ dev trc,00000] Attach to HDB : 1.00.68.384084 (NewDB100_REL) 7595 0.076147
4 ETW000 [ dev trc,00000] Database release is HDB 1.00.68.384084 49 0.076196
4 ETW000 [ dev trc,00000] INFO : Database 'HDB/00' instance is running on 'hanaserver' 6867 0.083063
4 ETW000 [ dev trc,00000] INFO : Connect to DB as 'SAPCM1', connection_id=201064 43659 0.126722
4 ETW000 [ dev trc,00000] DB max. input host variables : 32767 6954 0.133676
4 ETW000 [ dev trc,00000] DB max. statement length : 1048576 34 0.133710
4 ETW000 [ dev trc,00000] DB max. array size : 100000 75 0.133785
4 ETW000 [ dev trc,00000] use decimal precision as length 21 0.133806
4 ETW000 [ dev trc,00000] ABAPVARCHARMODE is used 19 0.133825
4 ETW000 [ dev trc,00000] INFO : DBSL buffer size = 1048576 20 0.133845
4 ETW000 [ dev trc,00000] Command info enabled 19 0.133864
4 ETW000 [ dev trc,00000] Now I'm connected to HDB 18 0.133882
4 ETW000 [ dev trc,00000] 00: hanaserver-HDB/00, since=20140602134916, ABAP= <unknown> (0) 30 0.133912
4 ETW000 [ dev trc,00000] } DbSlHDBConnect(rc=0) 18 0.133930
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=30,arg_p=0000000000000000) 24 0.133954
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.133972
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F460) 22 0.133994
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.134012
4 ETW000 [ dev trc,00000] Connection 0 opened (DBSL handle 0) 36 0.134048
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=7,arg_p=000000000205F4B0) 25 0.134073
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.134090
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=63,arg_p=000000000205F2B0) 23 0.134113
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.134131
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=21,arg_p=000000000205F300) 12214 0.146345
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 32 0.146377
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=11,arg_p=000000000205F420) 26 0.146403
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.146421
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=22,arg_p=000000000205F390) 23 0.146444
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 37 0.146481
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=13,arg_p=000000000205F260) 29 0.146510
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.146528
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=24,arg_p=000000000205F210) 37 0.146565
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 35 0.146600
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=51,arg_p=000000000205F200) 40 0.146640
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=15) 31 0.146671
4 ETW000 [ dev trc,00000] { DbSlHDBPrepare(con_hdl=0,ss_p=000000000205F4E0,op=3,da_p=000000000205F540)
4 ETW000 46 0.146717
4 ETW000 [ dev trc,00000] -> buildSQLStmt(stmt_p=000000000205F4B0,da_p=000000000205F540,for_explain=0,lock=0,op=3)
4 ETW000 89 0.146806
4 ETW000 [ dev trc,00000] <- buildSQLStmt(len=27,op=3,#marker=0,#lob=0) 33 0.146839
4 ETW000 [ dev trc,00000] -> stmt_prepare(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0) 75 0.146914
4 ETW000 [ dev trc,00000] sc_p=0000000003AEAC40,no=0,idc_p=0000000000000000,con=0,act=0,slen=27,smax=256,#vars=0,stmt=000000000AD913E0,table=SVERS
4 ETW000 46 0.146960
4 ETW000 [ dev trc,00000] SELECT VERSION FROM SVERS ; 23 0.146983
4 ETW000 [ dev trc,00000] CURSOR C_0000 PREPARE on connection 0 21 0.147004
4 ETW000 [ dev trc,00000] } DbSlHDBPrepare(rc=0) 6174 0.153178
4 ETW000 [ dev trc,00000] { DbSlHDBRead(con_hdl=0,ss_p=000000000205F4E0,da_p=000000000205F540)
4 ETW000 53 0.153231
4 ETW000 [ dev trc,00000] ABAP USER is not set 25 0.153256
4 ETW000 [ dev trc,00000] -> activate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540) 25 0.153281
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,da_p=000000000205F540)
4 ETW000 30 0.153311
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=0,col_cnt=0) 21 0.153332
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
4 ETW000 54 0.153386
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
4 ETW000 33 0.153419
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 33 0.153452
4 ETW000 [ dev trc,00000] -> exec_modify(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,bulk=0,in_out=1,da_p=000000000205F540)
4 ETW000 36 0.153488
4 ETW000 [ dev trc,00000] -> stmt_execute(sc_hdl=0000000003AEAC40,ss_p=000000000205F4E0,in_out=1,da_p=000000000205F540)
4 ETW000 95 0.153583
4 ETW000 [ dev trc,00000] OPEN CURSOR C_0000 on connection 0 28 0.153611
4 ETW000 [ dev trc,00000] CURSOR C_0000 SET InputSize=1 23 0.153634
4 ETW000 [ dev trc,00000] CURSOR C_0000 EXECUTE on connection 0 22 0.153656
4 ETW000 [ dev trc,00000] execute() of C_0000, #rec=0, rcSQL=0, rc=0 6404 0.160060
4 ETW000 [ dev trc,00000] CURSOR C_0000, rc=0,#rec=0,#dbcount=0 36 0.160096
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,da_p=000000000205F540)
4 ETW000 33 0.160129
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=1,col_cnt=1) 21 0.160150
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,types=000000000205F518,#col=1,useBulkInsertWithLobs=0)
4 ETW000 37 0.160187
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=72,rec_lng=144,db_lng=144
4 ETW000 31 0.160218
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=144, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 31 0.160249
4 ETW000 [ dev trc,00000] -> allocIndicator(in_out=1,row_cnt=1) 21 0.160270
4 ETW000 [ dev trc,00000] -> allocData(in_out=1,size=1048576) 21 0.160291
4 ETW000 [ dev trc,00000] -> bind_type_and_length(sc_hdl=0000000003AEAC40,in_out=1,bulk=0,arr_size=1,types=000000000205F518,da_p=000000000205F540)
4 ETW000 45 0.160336
4 ETW000 [ dev trc,00000] -> exec_fetch(sc_hdl=0000000003AEAC40,bulk=0,da_p=000000000205F540)
4 ETW000 41 0.160377
4 ETW000 [ dev trc,00000] xcnt=1,row_i=0,row_pcnt=0 20 0.160397
4 ETW000 [ dev trc,00000] -> stmt_fetch(sc_hdl=0000000003AEAC40) 20 0.160417
4 ETW000 [ dev trc,00000] CURSOR C_0000 FETCH (xcnt=1) on connection 0 23 0.160440
4 ETW000 [ dev trc,00000] next() of C_0000, rc=0 27 0.160467
4 ETW000 [ dev trc,00000] fetch() of C_0000, #rec=1, rc=0, rcSQL=0 28 0.160495
4 ETW000 [ dev trc,00000] -> deactivate_stmt(sc_hdl=0000000003AEAC40,da_p=000000000205F540,rc=0)
4 ETW000 91 0.160586
4 ETW000 [ dev trc,00000] -> StmtCacheFree(DBSL:C_0000) 24 0.160610
4 ETW000 [ dev trc,00000] CURSOR C_0000 CLOSE resultset on connection 0 20 0.160630
4 ETW000 [ dev trc,00000] } DbSlHDBRead(rc=0) 34 0.160664
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=43,arg_p=00000001400FAB06) 25 0.160689
4 ETW000 [ dev trc,00000] INFO : SAP RELEASE (DB) = 740 19 0.160708
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 16 0.160724
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=41,arg_p=00000001400FAB98) 49 0.160773
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.160792
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002055888) 22 0.160814
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 18 0.160832
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002055880) 22 0.160854
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 26 0.160880
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=52,arg_p=00000000020558F0) 23 0.160903
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 17 0.160920
4 ETW000 [ dev trc,00000] { DbSlHDBControl(con_hdl=0,command=20,arg_p=0000000141FC74F0) 99 0.161019
4 ETW000 [ dev trc,00000] INFO : STMT SIZE = 1048576 21 0.161040
4 ETW000 [ dev trc,00000] INFO : MARKER_CNT = 32767 18 0.161058
4 ETW000 [ dev trc,00000] } DbSlHDBControl(rc=0) 19 0.161077
4 ETW000 [ dev trc,00000] NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS'...
4 ETW000 38 0.161115
4 ETW000 [ dev trc,00000] { DbSlHDBPrepare(con_hdl=0,ss_p=0000000002055160,op=3,da_p=00000000020551B0)
4 ETW000 31 0.161146
4 ETW000 [ dev trc,00000] -> buildSQLStmt(stmt_p=0000000002055180,da_p=00000000020551B0,for_explain=0,lock=0,op=3)
4 ETW000 32 0.161178
4 ETW000 [ dev trc,00000] <- buildSQLStmt(len=63,op=3,#marker=0,#lob=0) 23 0.161201
4 ETW000 [ dev trc,00000] -> stmt_prepare(sc_hdl=0000000003AEACD8,ss_p=0000000002055160) 38 0.161239
4 ETW000 [ dev trc,00000] sc_p=0000000003AEACD8,no=1,idc_p=0000000000000000,con=0,act=0,slen=63,smax=256,#vars=0,stmt=000000000AE09690,table=DDNTT
4 ETW000 38 0.161277
4 ETW000 [ dev trc,00000] SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS' ; 21 0.161298
4 ETW000 [ dev trc,00000] CURSOR C_0001 PREPARE on connection 0 19 0.161317
4 ETW000 [ dev trc,00000] } DbSlHDBPrepare(rc=0) 6453 0.167770
4 ETW000 [ dev trc,00000] db_con_test_and_open: 1 open cursors (delta=1) 30 0.167800
4 ETW000 [ dev trc,00000] db_con_check_dirty: 1 open cursors, tx = NO , bc = NO 18 0.167818
4 ETW000 [ dev trc,00000] db_con_check_dirty: db_con_dirty = YES 16 0.167834
4 ETW000 [ dev trc,00000] { DbSlHDBBegRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
4 ETW000 35 0.167869
4 ETW000 [ dev trc,00000] ABAP USER is not set 23 0.167892
4 ETW000 [ dev trc,00000] -> activate_stmt(sc_hdl=0000000003AEACD8,da_p=00000000020551B0) 23 0.167915
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,da_p=00000000020551B0)
4 ETW000 32 0.167947
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=0,col_cnt=0) 23 0.167970
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=0,bulk=0,types=0000000000000000,#col=0,useBulkInsertWithLobs=0)
4 ETW000 34 0.168004
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=0,#int=0,#llong=0,#uc=0,rec_lng=0,db_lng=0
4 ETW000 30 0.168034
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=0, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=1)
4 ETW000 31 0.168065
4 ETW000 [ dev trc,00000] -> exec_modify(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,bulk=0,in_out=1,da_p=00000000020551B0)
4 ETW000 32 0.168097
4 ETW000 [ dev trc,00000] -> stmt_execute(sc_hdl=0000000003AEACD8,ss_p=0000000002055160,in_out=1,da_p=00000000020551B0)
4 ETW000 32 0.168129
4 ETW000 [ dev trc,00000] OPEN CURSOR C_0001 on connection 0 20 0.168149
4 ETW000 [ dev trc,00000] CURSOR C_0001 SET InputSize=1 19 0.168168
4 ETW000 [ dev trc,00000] CURSOR C_0001 EXECUTE on connection 0 20 0.168188
4 ETW000 [ dev trc,00000] execute() of C_0001, #rec=0, rcSQL=0, rc=0 5712 0.173900
4 ETW000 [ dev trc,00000] CURSOR C_0001, rc=0,#rec=0,#dbcount=0 34 0.173934
4 ETW000 [ dev trc,00000] -> bind_variables(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,da_p=00000000020551B0)
4 ETW000 32 0.173966
4 ETW000 [ dev trc,00000] -> allocParameter(in_out=1,col_cnt=2) 21 0.173987
4 ETW000 [ dev trc,00000] -> calculate_record_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,types=0000000002055240,#col=2,useBulkInsertWithLobs=0)
4 ETW000 34 0.174021
4 ETW000 [ dev trc,00000] #float=0,#lob=0,itab=0,#short=2,#int=0,#llong=0,#uc=0,rec_lng=16,db_lng=4
4 ETW000 30 0.174051
4 ETW000 [ dev trc,00000] <- calculate_record_length(row_size=16, lob_cnt=0, lob_pw_cnt=0, long_cnt=0, ins_bulk_lob=0, row_max=65536)
4 ETW000 32 0.174083
4 ETW000 [ dev trc,00000] -> allocIndicator(in_out=1,row_cnt=65536) 20 0.174103
4 ETW000 [ dev trc,00000] -> allocData(in_out=1,size=1048576) 30 0.174133
4 ETW000 [ dev trc,00000] -> bind_type_and_length(sc_hdl=0000000003AEACD8,in_out=1,bulk=1,arr_size=65536,types=0000000002055240,da_p=00000000020551B0)
4 ETW000 36 0.174169
4 ETW000 [ dev trc,00000] } DbSlHDBBegRead(rc=0) 24 0.174193
4 ETW000 [ dev trc,00000] { DbSlHDBExeRead(con_hdl=0,ss_p=0000000002055160,da_p=00000000020551B0)
4 ETW000 35 0.174228
4 ETW000 [ dev trc,00000] ABAP USER is not set 20 0.174248
4 ETW000 [ dev trc,00000] -> exec_fetch(sc_hdl=0000000003AEACD8,bulk=0,da_p=00000000020551B0)
4 ETW000 33 0.174281
4 ETW000 [ dev trc,00000] xcnt=1,row_i=0,row_pcnt=0 20 0.174301
4 ETW000 [ dev trc,00000] -> stmt_fetch(sc_hdl=0000000003AEACD8) 20 0.174321
4 ETW000 [ dev trc,00000] CURSOR C_0001 FETCH (xcnt=1) on connection 0 20 0.174341
4 ETW000&Hi,
Could you check for SAP Note 1952701 - DBSL supports new HANA version number
Regards,
Gaurav -
Hello,
I have a Palm Centro Phone and Dell Latitude D610 with a Dell wireless 350 bluetooth module. I can send pics from phone to laptop, but when i try to send from my laptop to phone, I get the following message:
remote device does not support service
Can anyone help?
Thanks,
George
Post relates to: Centro (AT&T)Hi George, have you paired the two devices as a "Trusted Pair"?
Try pairing them from the Centro side.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Hi I am having problems trying to download apps with the express checkout
Hi and welcome to the forums!
The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
Thanks,
Bifocals
BlackBerry Device Software 5.0 main support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Why ios devices does not support Pause feature on camera app
Is there any harm to device if Pause feature will incorporated ?
On iPhone 6 & 6+, iPad Air2 don't have Pause functionality of their Primary Camera app.
Any idea why apple doesn't think to incorporate Pause this feature ?
Thanks.I know this is discussion portal and we all are apple users. I know, I am not asking to the apple's R & D team to answer my concern...
But my intension to put this question was to get the alternative solution like any other App in App store which offers Pause functionality during Video recording. -
Your device does not support navigation
.oh and it is a N900 and I spend a three month saleriy on it.
theking2 wrote:
.oh and it is a N900 and I spent three month salary on it.
@theking2
Unfortunately OVI Maps voice navigation is not available but there is option to purchase Sygic Mobile Maps:http://www.sygic.com/index.php/en/press-releases/press-news/300-sygic-mobile-maps-for-nokia-n900-mae...
Happy to have helped forum with a Support Ratio = 42.5 -
Im running WSUS on Windows 2012 R2. Installed over "Add Roles and Features". Configured, synchronisation works, but can not download any updates.
System
Provider
Name]
Windows Server Update
Services
EventID
364
Qualifiers]
0
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-08-27T06:43:36.000000000Z
EventRecordID
390
Channel
Application
Computer
wsus-server.murrcz.local
Security
EventData
Content file download
failed. Reason: The server does not support the necessary HTTP protocol.
Background Intelligent Transfer Service (BITS) requires that the server support
the Range protocol header. Source File:
/msdownload/update/software/crup/2011/03/windows6.1-kb2506014-x64_8c22199a738b51dbfe78262ca21ba98cf8bdeca2.cab
Destination File:
C:\WSUS-updates\WsusContent\A2\8C22199A738B51DBFE78262CA21BA98CF8BDECA2.cab
The online help not works:
Content download has failed. BITS service is not starting or is stopping during downloads.
Open a command window.
Type sc config bits start= auto
Type net stop bits && net start bits
Type net stop wsusservice && net start wsusservice
Start WSUS 3.0: Click Start, click Administrative Tools, then click
Microsoft Windows Server Update Services v3.0.
Click Synchronization Results.
In the Action pane, click Synchronize Now.
Verify
Look for the corresponding error event.
Open a command window.
Type cd <WSUSInstallDir>\Tools
Type wsusutil checkhealth
Type eventvwr
Review the Application log for the most recent events from source Windows Server Update Services and event id 10030.
The KB922330 not aplicable, ExecuteSQL.exe not present.
Please help.
Thanks.\SQLCMD.EXE -S \\.\pipe\MICROSOFT##WID\tsql\query -d "SUSDB" -Q "update tbConfigurationC set BitDownloadPriorityForegroud=1"
This should be considered a temporary fix. It will saturate your Internet connection during periods of WSUS downloads in this configuration.
The correct and permanent fix should be to resolve the failure of your perimeter device to properly support the HTTP v1.1 protocol specification (which is now some 14 years old).
Either your device is misconfigured, or it needs a firmware update to support the full specification.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?
Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.
-
Could not turn on Screen mirroring. The output device is not ready or does not support HDCP
i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Fatal error: Client does not support authentication protocol
requested by server; consider upgrading MySQL client in
/homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
on line 9
This is the error that comes up on the server where the site
sits. The database is working on my local machine with the local
settings, but wont connect due to the above.
I think im using MySQL client 3.23 How do i upgrade?
I found this on MySQL site:
http://dev.mysql.com/doc/refman/5.0/en/old-client.html
I'm not sure how to edit the connection string to make it
accept the vaules.The_FedEx_Guy wrote:
> Fatal error: Client does not support authentication
protocol requested by
> server; consider upgrading MySQL client in
>
/homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
on
> line 9
> I think im using MySQL client 3.23 How do i upgrade?
The MySQL client that the error refers to isn't the version
of MySQL,
but the MySQL library bundled with PHP. It sounds as though
your hosting
company has upgraded to MySQL 4.1 or higher, but is still
using PHP 4.
> I'm not sure how to edit the connection string to make
it accept the vaules.
You can't. It's the way that the user account passwords are
stored in
MySQL. You need to get the hosting company to upgrade to PHP
5 or to
reset the passwords in MySQL using the OLD_PASSWORD()
function. This
needs to be done by someone with top-level administrative
privileges on
the database.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
TFTP, Protocol does not support listing directories
Hi everyone,
I am trying to install patch for PI 1.4 because of the browser problem. I have downloaded the patch.
I also have read the post https://supportforums.cisco.com/docs/DOC-26972#comment-22434 and followed the steps described.
I created repository and try to make the tftp server's root directory into the repository, as u can see in the picture below. Is it correct? Because when I want to display the file contain in the repository, the error message shown "Protocol does not support listing directories", what does it mean?
Thanks.Here's another way:::
1) From your PC launch a CMD Prompt
2) CD to the directory where the patch is installed
3) ftp xxx.xxx.xxx.xxx (this is the IP address of the NCS/PI server)
4) login as ftp-user
5) enter the password created during the install of NCS/PI for the ftp user account (if you don’t know it, you can change it by entering
ncs password ftpuser ftp-user password
6) type bin then press return
7) type hash then press return
8) type put
9) login to the CLI of the NCS/PI server as an admin user
10) type dir disk:ftp and you’ll see the file stored in the /localdisk/ftp directory on the disk
11) if you don’t have a repo pointing to disk:ftp then create one using
a) config t
b) repository localftp
c) url disk:/ftp
d) exit
12) type ncs stop
13) type patch install localftp
Note: if a PC firewall is enabled, you may have to disable it in order to get the file transfer to work -
"Desktop does not support requested protocol" - vmware client on OS X 10.8
Down loaded vmware client 1.7 on myiMac running Mountain Lion. I get the following issue - "Desktop does not support requested protocol"
Can anyone advise or guide me?Thank you, understood, and I will not uninstall anything, but do I install this current update 3.8.2. v1.1?
My current system does not match what is needed for it according to the information on this page ...
http://support.apple.com/en-us/HT201068
The system requirements needed for the update are OS X 10.9 or later, and my system is OS X 10.8.5. -
Error: Device type SWIN does not support page..
Hi All,
I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
Device type SWIN does not support page for ZSTICKER(my page name).
Please do needful help ASAP.
-DharmeshHi,
You need to link your new page to a device type. Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
Regards,
Nick -
Device type does not support page format
Hi All,
There is one issue when I print a sapscript. I get an error message as follows:
Device type EPESCP9 does not support page format ZSG02
Could someone advise?
Thanks
AliceHi,
The page format ZSG02 is not present in Device type EPESCP9.
in SPAD t.code add the page format in that device type.
Better inform to BASIS people they will add page format in that device type.
Refer the link Device type does not support page format
Regards,
Dhina.. -
TS2634 I am trying to connect my camera through a USB and it says it does not support this device
I just bought the USB connector for mynipadbandntried to connect my camera but it comes up does not support this device. What do I need to do in order to connect my camera ?
What model camera?
Cheers, Tom
Maybe you are looking for
-
Satellite M60-164 need AC Adapter
I have a Satellite M60-164. I tried to purchase a replacement AC Adapter. I sent the part number to my supplier and they tell me that it is discontinued. Anyone know an equivalent compatible adapter for Satellite M60-164.......thanks in advance for y
-
What Are Our Spreadsheet Options?
Hi, I don't want to shell out for Excel and / or Office (I just got iWork, in fact). What are my options for spreadsheets on Mac OS X? I could easily make do with Gnumeric. I'd prefer to avoid OpenOffice earlier than 2.0. X11-based apps are OK, if no
-
Mortgage Servicing Sold and 16-18 point hit occurs
I wasn't happy with Ocwen servicing and some of their tactics, but I am even more unhappy with Nationstar at this point.I have 2 mortgages on 2 properties.I was past the 740 mark with TU 08 and quickly approaching 740 with EQ 08 and EX 08. Ocwen sold
-
How to use multiple statements inside the "THEN" block of CASE statement?
Below is the code: SET @strTempString = case @strKeyMode WHEN 'AUTO/CYCLE' THEN @strRefID + '|' + @strRetID WHEN 'CYCLE' THEN @strRefID + '|' + @strRetID WHEN 'COMMERCIAL' THEN @strRefID + '|' + @strRetID WHEN 'ISNAP' THEN set @strFName = ltrim(r
-
Condition Tables with Release status
When we create condition tables, we have the option of creating them with release status or without release status. What is the difference? What is release status? Thanks, Venkat