Device Driver Issue - Please help
Hello All,
We are currently using SCCM 2012 SP1 for OS Deployment and i have been working on a HP elitebook 820 G1 and probook 650 G1. Both build successfully but do not install any device drivers.
I have downloaded the driver package from HPs website, extracted all the drivers (inf,sys,cat) and put them into 'one' folder, i then created a driver package and imported the drivers into the package and category.
In the task sequence i have created a 'apply driver package task' with the wmi query for this model, i have also tried disabling the 'auto detect drivers' so that it doesn't look into the DB.
So far i haven't had any luck and have been working on this for over a week.
I have looked at the smsts log on the workstation after the build and there are no errors relating to drivers.
Any help will be appreciated
Honestly it sounds like something isn't right with the WMI query. Can you confirm that your WMI query is correct? Open a command prompt on one of the computer models you are having issues with. Run "wmic csproduct get name" which will report back the computer
model as seen by WMI. Confirm that your WMI query would be valid based on that name. WMI queries that I have used...
Most manufacturers:
SELECT * FROM Win32_ComputerSystem WHERE Model like "<model name from WMI>"
Lenovo:
SELECT * FROM Win32_ComputerSystemProduct WHERE Version like "ThinkPad T510"
Jarvis
Blog:
http://verbalprocessor.com Twitter:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
The postings on this site are my own and don’t necessarily represent my employer’s positions, strategies or opinions.
Similar Messages
-
Hard Drive Issues - Please Help
I have an early 2011 15 inch MBP i7 8gb ram. I was running really sluggishly so I did a complete reformat of the hard drive. That did not work, and even after reinstalling everything manually (not from a time machine backup) it is still really slow. When viewing the finder, it get very different numbers on how much free space is left. Once it said I had 1.2 TB free even thought it is only a 1 TB drive. I have run Verify Disk in disk utility and got:
Verifying volume “Lion”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Incorrect block count for file temp5069729
(It should be 5120 instead of 415299)
Incorrect block count for file temp5069735
(It should be 16896 instead of 100913)
Incorrect block count for file temp5069739
(It should be 16384 instead of 726426)
Incorrect block count for file temp5069740
(It should be 70656 instead of 720595)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Volume bitmap needs minor repair for orphaned blocks
Checking volume information.
Invalid volume free block count
(It should be 109655121 instead of 105856262)
The volume Lion was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
When I use my start up disk and reapiar it says the repair is successful, but then a week later if I run the verify disk again I get something similar to above. Why is this happening? Is the hard drive bad?
Thanks for any help.
- DavidThe hard drive is dead. Take it in to the store for repair.
-
My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.If you want to just extract the playlists from your iPod, plug it in iTunes. When it appears under devices, right->click on it and choose Export Playlists. Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-
The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYSTHANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS... -
My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.
-
Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.
Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows PublisherHi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.
-
My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.
Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra -
I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.
I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.
Hi,
I am not sure what the R3271 is, but we have a driver for the R3272 (Spectrum Analyzer with GSM option). Normally API's do not change significantly and so it is very likely that you will be able to use this driver for your application. You can get it by going to www.ni.com/idnet. The easiest way to get the the page is just to seach by vendor.
Hope this helps out.
Aaron K.
Application Engineer
National Instruments -
Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
JI'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related. -
how can i download old settings with firefox sync ? i formatted my computer thinking that the data will be restore on login , but it's only letting my sync firefox with mobile device , can someonr please help my ?
'''Did you backup whatever bookmarks you did have on the computer ? '''
Remember any restoring of bookmarks overwrites whatever he current set is, and you may not want to loose them.
Even if up until now you have not made any backups of Desktop bookmarks Firefox will have backed up some of them into sets of daily bookmark backups. Once you have backed up your current set you could look at what it has by restoring those bookmarks, you may find one of those sets is fairly complete.
By the way if you look at the profile files and folders that you should now have on the desktop you should see it contains a bookmarks backup folder, the size of the files within should indicate whether they contain anything.
You need to go into the bookmarks library and try the restore option. Backup each set that you look at if it has anything of use in it, before trying the next set. With look one of those will be a fairly complete set of bookmarks.
* USE '''Show All Bookmarks -> Import and Backup -> Restore '''
** see [[Restore bookmarks from backup or move them to another computer#w_restoring-from-backups]]_restoring-from-backups
I do not use Firefox on mobiles, but before you try anything further you do need to backup the desktop bookmarks and learn what existing backups you have. Unless you master that you are in continual danger of overwriting and loosing bookmarks.
Presumably you have already found this listing of help articles for mobiles
* [/products/mobile/bookmarks] -
On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.
Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.
-
Hello,
I have got a major prolen during transport.
I have GEMPLOYE1 Which is a time dependient master data. which has Attribute called 0COUNTRY_ID.
I have a custome attribute Called Actual PSGroup/Grade GPAYSCGR which has a compounpunding attribute 0COUNTRY_ID
Now when I am trying to transport PSGroup/Grade GPAYSCGR to QA that transport is failing , the log massage is
Characteristic GEMPLOYE1: Attribute GPAYSCGR compounded to 0COUNTRY_ID has a diff. time-dpdncy
If any one saw this issue, please help me to fix the same.
SamitHi Venu,
We can't add authorisation objects on Individual servers.We need to add authorisations on BWD ie Dev system and transport to BWI QUA system.This is the Process we need to follow as per our rule set.
So,As the problem mentioned above if i add some auth. objects on BWD DEV system and transport it to BWI QUA system,it is getting transported Successfully to BWI,but the auth.objects what i have added on BW DEV system is not found on BW QUA system.
What could be the problem for that,Is that the problem with transports like TP error or is it related with some tables of auth.objects...................
Could u please analyse the problem and tell me the solution for this..........
Thanks Much
Swapna.D -
Headerrenderer issue -Please help
Headerrenderer issue -Please help
hi
I have a datagrid and I am doing a custom sorting on the grid(by getting data from DB).
I achieve this by capturing the headerrelease event of datagrid .In thee venthandler I will query from DB and do event.preventdefault to prevent standard grid sorting.
Now I need to display my own custom ascending/descending arrows in the header.i have created an header renderer for this,
In the headerrenderer I am lsitening to the headerrelease event of datagrid and in the eventlistener, as per the sortfield, i am trying to make the sort arrow visible/invisible.
But somehow making the sort arrows visible/invisible is not working.The initial arrow works fine.it is shown the correct column(Name) as done in the init() method.
The eventhandler is invoked on clicking the column headers and all the alerts are shown.
Please see the headerrenderer code below and help me.(code is not complete only the relevant part is included)
<?xml version="1.0" encoding="utf-8"?><mx:HBox
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalScrollPolicy="off" creationComplete="init()" implements="mx.controls.listClasses.IDropInListItemRenderer">
public function init():void{
headerLabel = dataField.label;
_dataGrid.addEventListener(DataGridEvent.HEADER_RELEASE,sortChanged,false);
if(_dataField.localeCompare('Name')==0)asc.visible=true; }
private function sortChanged(e:DataGridEvent){
var dg:DataGrid=e.currentTarget asDataGrid;
varcolumn:DataGridColumn = DataGridColumn(e.currentTarget.columns[e.columnIndex]);if(_dataField.localeCompare(e.dataField)==0)
if(asc.visible ||(!asc.visible&&!desc.visible))
Alert.show(
'in..');
asc.visible=false;
desc.visible=true;
else if(desc.visible){
asc.visible= true;
desc.visible=
false;
else{
asc.visible=
false;
desc.visible=
false;
]]>
</mx:Script>
<mx:Text text="{_headerLabel}" />
<mx:Image source="{ascIcon}" id='asc' visible="false">
<mx:Image source="{descIcon}" id='desc' visible="false"/>
</mx:HBox>I got the solution!!
i need to assign the headerrendereer to the columns dynamically inorder for this to work:
if anybody wants to know details of solution let me know -
HP Pavilion dv6 Graphics Driver/ Card Issue- PLEASE HELP!
Please help!
I play games on my laptop and since about a week ago every time I try to play my games I get a Blue Screen after about 2 minutes of gameplay.
My BlueScreen says the following:
BCCode: 116
BCP1: FFFFFA800D7BE0C0
I made sure that my drivers are up to date and my computer is "cleaned out", but it still doesnt work.
Why hasnt HP updated their drivers since 2011!? Many people have this issue with no solutions known. I am about to sell this laptop and buy a different more reliable brand.Hi K3lly1313, welcome to the HP Forums. I understand that you are getting Bluescreen errors after a few minutes of gameplay.
To provide more accurate troubleshooting, I will need to know more information about your setup. What is the model or product number of your DV6? What version of Windows is installed? Please use the following guides if you need help finding that information:
Guide to finding your product number
Which Windows operating system am I running?
Is the error happening in one specific game, or multiple games? What game(s)?
I look forward to your response.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Itunes/Iphone/Ipod device driver issues - tried everything. Still not working.
After hours and hours of research, I'm completely stuck. Here's the basic problem.
When I plug in my Iphone to my laptop, windows pulls up a little window that says installing device driver software. After several minutes, the process fails and a message comes up that says windows found drivers for my device, but encountered an error and wasn't able to install them. In the device manager, the iphone is listed as an "other device" with a yellow triangle/exclamation point. Itunes never recognizes the device.
When I plug in my ipod nano 4th generation, the exact same thing happens, except it's listed in the device manager as an ipod. (same yellow triangle though.)
Up until today, both of these devices have been working properly, syncing without trouble. The iphone synced wirelessly and the ipod every time I plugged it in. I can't figure out what on earth happened to my laptop today that messed things up.
It's also worth noting that I have another older ipod nano... second generation, I think, that plugs in and is recognized immediately, works perfectly.
Here is what I've done so far:
1. I worked through every single troubleshooting guide that Apple has to offer. No change.
2. I did a complete clean install of itunes and all additional components, rebooted and reinstalled. No change.
3. I uninstalled/re-installed usb controllers in the device manager. No change.
4. reset both the phone and the ipod. No change.
5. I've tried various cables. No change.
6. I've run system checks and repair utilities for windows vista.
7. I've used selective start up to see if another program is interfering. I've stood on my head and counted to one hundred. I've only said seventeen swear words.
At this point I've done so much searching and troubleshooting, I can't imagine how anything is going to fix this issue. So this is my last hope. Please oh please be smart enough to tell me what to do...Not sure if this is significant, but in a weird turn of events, when I tried plugging the ipod in this morning, the little message that pops up to install device driver software actually told me the drivers were installed successfully. However, in the device manager, it still says the drivers are NOT installed properly, the little yellow triangle is still there and the ipod still isn't registering in itunes, or my computer. So. Not really any improvement, but a different symptom none the less?
I'm desperate, guys. Someone help?
Maybe you are looking for
-
Nomad jukebox zen nx 30gb sound prob
please help! when i transfer my mp3's from my pc to my zen nx the tracks play but the vocals sound as if your in a swimming pool. this is with the eax in the off position anybody else had this problem and any suggestions as how to remedy it.
-
How do I download photos from iPhone
How do I download photos from iPhone
-
Saving a journey details to my phone.
I have logged in and managed to find the journey details for a particular run that I propose to make, but I cannot find out how to store the whole journey on to my phone ( a folder?) so that I can quickly access the details when I need to set off. Is
-
Error While calling the AFL_WRAPPER_GENERATOR for Link prediction for PAL
Hi I try to do link prediction but it is giving the following error can some one help me on this CALL "HCP"."HCP_AFL_WRAPPER_GENERATOR"('PAL_LINK_PREDICTION_PROC','AFLPAL','LINKPREDICTION', NEO_XXXXX.PAL_LP_PDATA_TBL); [129]: transaction rolled back
-
Revision: 2384 Author: [email protected] Date: 2008-07-08 06:23:19 -0700 (Tue, 08 Jul 2008) Log Message: The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this chang