Dhcpcd and the lease file

Hi folks,
I am using a laptop with network manager that has worked well for quite a while. I typically use wireless but at work I have to sometimes go with the cable. Today I had a problem where I couldnt get an IP via eathernet. After some lont troubleshooting, I came up with:
dhcpcd --debug eth1
dhcpcd: version 5.1.4 starting
dhcpcd: eth1: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason PREINIT
dhcpcd: eth1: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason CARRIER
dhcpcd: eth1: reading lease `/var/lib/dhcpcd/dhcpcd-eth1.lease'
dhcpcd: eth1: broadcasting for a lease
dhcpcd: eth1: sending DHCP_DISCOVER (xid 0xa30f717), next in 3.38 seconds
dhcpcd: eth1: sending DHCP_DISCOVER (xid 0xa30f717), next in 8.56 seconds
dhcpcd: eth1: sending DHCP_DISCOVER (xid 0xa30f717), next in 16.82 seconds
dhcpcd: eth1: wrong xid 0x2f778173 (expecting 0xa30f717) from xxx.xxx.xxx.xxx
dhcpcd: eth1: sending DHCP_DISCOVER (xid 0xa30f717), next in 32.71 seconds
dhcpcd: timed out
I then removed the lease file for eth1 and dhcpcd worked.  Any reason I would have had a problem like this? Bug maybe?
-Shawn

Ya, it may be. I had timeout problem too. Don't see in the bugreport the same mesage reguarding the lease file though. Seems like the lease file must be removed or over written once the lease has expired or comes from a different dhcp server. Dosen't seem to be the case for me though.
-Shawn

Similar Messages

  • I have two excel files I cannot open or delete from my desktop.  One is titled 6ACAD200 and the other file is titled 8D73A700.  How can I get these off of my computer?

    I have two excel files I cannot open or delete from my desktop.  One is titled 6ACAD200 and the other file is titled 8D73A700.  How can I get these off of my computer?

    From the names I'd guess they are temporary files. If excel is running, quit and try again. If they still won't move or delete reboot. If they still won't move or delete...kill a chicken at midnight under an oak tree?

  • I converted aif files to mp3 files in I tunes so I could put them on a flash drive.  Now when I transfer an album to the flash drive I get both the aif files and the mp3 files in the flash drive.  How do I get the iTunes to only copy the smaller file?

    I converted aif files to mp3 files in iTunes so I could put them on a flash drive.  Now when I transfer an album to the flash drive I get both the aif files and the mp3 files on the flash drive.  How do I get the iTunes to only copy the smaller file?

    My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
    Smart playlists cannot be edited manually, only by changing the rules.  You can use them as the basis for another smart playlist though.
    There is added overhead to using smart playlists, so don't go overboard.

  • ICal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed on alert.

    iCal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed.

    Calendar (not called iCal anymore) does not include that capability any longer, apparently.  What you have to do now is go to Automator and create a Calendar Alert action.  You can add a Run AppleScript object to the action and paste in your script there, then when you save it, it will become available as a choice in the alert menu in Calendar.

  • In Indesign CS6 I export an artboard to  TIFF with the sdk's funtion SnapshotUtilsEx- ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

    In Indesign CS6 I export an artboard to  TIFF with the sdk's funtion SnapshotUtilsEx->ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

    An easy example to prove this bug of Indesing CS6:  I create a psd with Photoshop CS6, with width 505 pixels, height 317 pixels and a resolution of 300 pixels per inch. This psd is placed on a page in InDesign CS6. Then I try to export it as a tiff with the functions:
    fSnapshotUtilsEx->Draw(flags,fullResolutionGraphics,greekBelowPtSize,enableAntiAliasing,tr ansparencyQuality,abortCheck,pVPAttrMap,bDrawNonPrintingObjects);
    and
    SnapshotUtilsEx-> ExportImageToTIFF (iStream)
    The resulting tiff has a width of 506 pixels (one pixel more in width). It will happen the same if we start with a width of 507 pixels, etc.
    This error does not occur with Indesign CS5, nor Indesing CC.

  • I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

    I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

    I don't understand your last paragraph.
    "The home page also has a full bar ..." What does "full bar" mean? " ... instead of the tray it had before."  What does "tray" mean?
    Anyway, you might try Settings > General > Reset > Reset Home Screen Layout
    I guess that cannot make things any worse.

  • I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

    I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

    You're welcome!  It's usually CS5 and below that has the ACR update problems.
    What counts is that you are back in business.
    Gene

  • Since updating my iPhone 3GS to iOS 4.3.3 I have been unable to sync my photos! Keep getting the error message unable to sync and 'the required file cannot be found.' Please help?

    Since updating my iPhone 3GS to iOS 4.3.3 I have been unable to sync my photos! Keep getting the error message unable to sync and 'the required file cannot be found.' Please help?

    Try deleting the iPod Photo Cache on your computer.
    http://support.apple.com/kb/ts1314

  • I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...

    I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...

    Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.

  • I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit.  Can anyone help?

    I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit.  Can anyone help?

    Is there an error message when you try to launch the iTunesSetup.exe (or iTunes64Setup.exe)? If so, what does it say? (Precise text, please.)

  • It can't find URL when i use HLS for vod and the vod file name contain Chinese.

    It can't find URL when i use HLS for vod and the vod file name contain Chinese。eg： http://127.0.0.1:8134/hls-vod/你好.mp4.m3u8.
    How does it support Chinese path?

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • While trying to import photos from my Canon 5D markIII, iPhoto displays an error message which says unreadable format and the following files could not be imported. Please advise???

    While trying to import photos from my Canon 5D markIII, iPhoto displays an error message which says unreadable format and the following files could not be imported. Please advise???

    the screen shot does not display (a Forum bug ) and if it did it does not answer the questions
    Seriously we can not see you and if you refuse to answer simple questions we can not help
    Need information to help
    what version of iPhoto? Is OS X 10.8 as you state correct for the OS? Has it ever worked? What has changed since it worked? Will Image Capture  ( in your applications folder) import the photos? How are you importing - USB to the camera? USB card reader? built in card reader?
    Any other clues that would help a total stranger who can not see you or your computer assist you?
    LN

  • Computer crashed, went to launch Thunderbird and the email files were gone, copied from backup and they are getting erased.

    Lost power on the computer and when it came back, went through the Windows 7 stuff and went to launch Thunderbird and the email files were gone. I copy them back from a backup to the directory and when I launch TB the tree is there in the correct order but when I click on something they all disappear. Another thing I can't do is create a directory under the host name, when I right click on the host name > New Folder > and try and create it under the host name it goes under the Inbox which is directly under the host name. If I try and drag to there I want it I get an error like the directory already exists. I still have the files/directories functioning on a laptop so not in total panic mode. Thanks
    ~Dave

    Discovered the problem, TB configured the email account as IMAP rather than POP. I went in and manually changed it to POP, copied the backup files and all better now.
    I would have deleted the original post but thought I'd post a follow up instead.
    ~Dave

  • I can't get CS6 to recognize R3D files. I put the plugin and the server files in the proper spot and I used 64 not 32 like it said. I still can't get it to work

    The only thing to do to get the R3D files working is download a plugin pack with 2 files in it. one goes in your plugin folder the other in some other folder. I found both original files and replaced them with the new ones. I have rebooted twice... nothing. it won't recognize R3D files. The Camera is a Red brand Epic Dragon and it puts our R3D files. R3D's are easily manipulated in Redcine, but I can't add my .mov files on it so I need to be able to work with these files in PP.

    I'm sad now
    Good thing I have a PC with 32-bit windows!
    Now, I can only assume apple is working on a 64-bit
    fix? I suppose that info/ETA is on the itunes page,
    I'll go take a look.
    Who knows what Apple plans are? I do know that they do not discuss upcoming releases of anything until its available.

  • SQL Loader and the bad file

    I use SQL Loader to read a file into a table. In my tests a lot of rows are rejected and written to the bad file. But there are no error messages.
    Is there a way to find out why the row was rejected.

    The Bad File
    The bad file contains records that were rejected, either by SQL*Loader or by the Oracle database server. Some of the possible reasons for rejection are discussed in the next sections.
    SQL*Loader Rejects
    Datafile records are rejected by SQL*Loader when the input format is invalid. For example, if the second enclosure delimiter is missing, or if a delimited field exceeds its maximum length, SQL*Loader rejects the record. Rejected records are placed in the bad file.
    Oracle Rejects
    After a datafile record is accepted for processing by SQL*Loader, it is sent to the Oracle database server for insertion into a table as a row. If the Oracle database server determines that the row is valid, then the row is inserted into the table. If the row is determined to be invalid, then the record is rejected and SQL*Loader puts it in the bad file. The row may be invalid, for example, because a key is not unique, because a required field is null, or because the field contains invalid data for the Oracle datatype.
    YOU WILL get more information
    sqlldr help=y
    also send your control file syntax
    kuljeet pal singh

Maybe you are looking for