Diagnostic Monitoring is not implemented

Hi All,
We are trying to find the reason and solution for the below problem. We are tring to perform the below command and get the below message.
router#show interfaces gigabitEthernet 5/1 transceiver
Diagnostic Monitoring is not implemented.
The module on which the above gig interface is WS-X6408A-GBIC and the IOS version running on this router is s72033-advipservicesk9_wan-mz.122-18.SXF11.bin. The sup on this router is SUP-720-3BXL.
Any help to understand why it is giving that message and the solution to overcome the same would be really appreciated.
Regards
Anantha Subramanian Natarajan
WS-X6408A-GBIC --Module 5
s72033-advipservicesk9_wan-mz.122-18.SXF11.bin
SUP-720-3BXL

Which GBIC optical modules are you installing into the WS-X6408A-GBIC? The following document outlines the DOM support by hdwe and software.
Cisco Digital Optical Monitoring Compatibility Matrix
<http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_8031.html>

Similar Messages

Diagnostic Monitoring Best Practices

Are there any general best practices for Azure Diagnostics?
Does enabling all diagnostic monitoring and performance counters have an impact on the performance of the application?
Does the sample rate on the performance counter have an impact on the performance?
Does the transfer period have an impact on performance?
Does the buffer size have an impact on performance, or is it just a matter of how much data you want to retain and store?
I am looking for a good trade off where diagnostic monitoring does not impact performance while also logging as much information as possible.

Hi,
Please have a check on the below link which talks about Commonly reported issues while leveraging Windows Azure Diagnostic configurations and Best Practices.
http://blogs.msdn.com/b/cie/archive/2013/04/16/commonly-reported-issues-while-leveraging-windows-azure-diagnostic-configurations-and-best-practices.aspx
More information :
http://msdn.microsoft.com/en-us/library/azure/hh771389.aspx
http://blogs.msdn.com/b/davidhardin/archive/2011/02/26/windows-azure-diagnostics-series.aspx
Hope this helps.
Regards,
Mekh.

Error while sending a message 501 not implemented

Hi all,
running some tests checking some Xi interfaces we have the following problem :
going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Service, user and password
On "send message to" we insert the string:
http://apl06gjbx:8031/XISOAPAdapter/MessageServlet?channel=:BSY_CDFS_CRISP_DX8:CC_SOAP_IF_KE_02_In
Executing "Send Message", we get the following error :
"error while sending message : 501 not implemented"
Any suggestion ?
thanks in advance

Hi all,
using a 53100 port and xml code in payload it seems better but we get the following error:
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
Display Stack Trace
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:328)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at jsp_FC_Secure1185456171353._jspService(jsp_FC_Secure1185456171353.java:24)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NullPointerException
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doProcessAfterInput(CmDynPage.java:60)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     ... 20 more

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

Monitoring info not appearing in console for one of the managed server

Monitoring info not appearing in console for one of the managed server though server is running fine. It happens some times. I tried to get these info from executruntimeMBean, but that is also not returning any info for that server. The entry for that server get erased from running-managed-server.xml after some time. Any idea why?

hi Arun,
Please find the below diagnostic module config fom the condig.xml
<server-diagnostic-config>
<data-retirement-enabled>true</data-retirement-enabled>
<wldf-data-retirement-by-age>
<name>DomainHealth_WLDFRetirePolicy_m2ap5</name>
<enabled>true</enabled>
<archive-name>HarvestedDataArchive</archive-name>
<retirement-time>2</retirement-time>
<retirement-period>6</retirement-period>
<retirement-age>1</retirement-age>
</wldf-data-retirement-by-age>
</server-diagnostic-config>
This configuration was present earlier also, but it looks like the logs statrted accumulating recently due to some other changes made to console. There is nothing coming under the WLDF console extension in server admin console.
Other than changing the start script, will it be fine to go the file location ./server/data/store/diagnostics/WLSDIAGNOSTIC**.DAT and delete the older file while the server is running now?
Incase not posisible , an example on the change in startscript and the config.xml will b helpful
thanks
JZWL

Error when sending message: Method not implemented

Hi, All:
We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
"Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
Thanks
Liang

HI Liang
Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
Thanks
Gaurav

External monitor is not listed by xrandr

Hi,
I have an external monitor (VGA) connected to my laptop. All worked fine until the last nvidia-package update. X would no longer start up and therefore I decided to use the free nv driver instead (xf86-video-nv package). I updated my xorg.conf and everything was fine except that my external monitor isn't recognized.
I own 2 external Monitors with VGA. When connected, both show the same picture as the internal monitor of my laptop but the picture is "shaking" the whole time. Doesn't look very healthy at all...
(And I don't want a duplication but an extension of screen space)
When I invoke xrandr it only lists my internal display. So I suppose the problem lies below all the Xorg.conf stuff. But I have no idea where to look for the cause of the problem.
Is the kernel responsible of recognizing my monitors? Or is it a differenz component? How can I find out if the kernel(if responsible) has recognized my monitor?
My system is up to date. No packages are held back. The relevant hardware is:
Nvidia GeForce 7400
Fujitsu Siemens (no model specification available)
Samsung Syncmaster 2243 BW
the following daemons are running:
crond dbus hal netfs network smartd syslog-ng
Last edited by essence-of-foo (2009-08-07 20:13:08)

Thanks for your replies.
djszapi wrote:1. You can create an xorg.conf with X -configure or with hwd, or try it without xorg.conf.
Does that mean that xrandr looks into the xorg.conf to see if there are more monitors?
I tried both methods.
X -configure created an xorg.xonf with the instruction to use the nvdia driver. The result was (as expected) that the screen of my monitor stays black and only sysreq could help me to reboot. I edited the file to let the xserver use the nv driver but this changed almost nothing except that I still could use the ctrl+alt+F1... keys to get back to the virtual console (remember: X was all black. No windowmanager ect. )
Using no xorg.conf has the same results as my current xorg.conf which I will paste later in this post. edit: The xorg.conf generated by X -configure has been attached too
2. Which version of kernel/driver do you use ?
As I wrote - everything is up to date.
That means:
Name : kernel26
Version : 2.6.30.4-1
Name : nvidia
Version : 185.18.31-1
Name : xf86-video-nv
Version : 2.1.14-1
Name : xorg-server
Version : 1.6.3-2
Name : hal
Version : 0.5.12git20090421.4fc367-2
3. Is it a 32/64 bit system ?
32 bits
4. Maybe you can show some related log files, like xorg.log, error.log, syslog.
Of couse:
xorg.conf (written by me):
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
#--- first screen settings
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Option "TwinView" "0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nv"
BoardName "GeForce Go 7400"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Monitor"
Identifier "Monitor0"
ModelName "Nvidia Default Flat Panel"
HorizSync 29.0 - 49.0
VertRefresh 0.0 - 61.0
EndSection
#--- second screen settings
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
Option "TwinView" "0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nv"
BoardName "GeForce Go 7400"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Monitor"
Identifier "Monitor1"
ModelName "Samsung SyncMaster"
#HorizSync 30.0 - 81.0
#VertRefresh 56.0 - 75.0
Option "RandRRotation" "yes"
EndSection
errors.log:
Aug 6 19:09:34 Linuxbox kernel: NOHZ: local_softirq_pending 80
syslog.log
Aug 10 18:02:02 Linuxbox syslog-ng[3632]: syslog-ng starting up; version='3.0.3'
hmm why dont u use the nvidia pakage ? Then you could use nvidia-utils for twinview
I did. But since the last update I can't use the Xserver any more with the nvidia driver. And nvidia's tools only work when the driver is already working in the background.
However I'm still wondering which component is responsible for recognizing the monitor. This will probalbly help me to investigate the problem.
edit: xorg.conf generated by X -configure and edited by me:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "record"
Load "extmod"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "G72M [GeForce Go 7400]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I changed the driver to "nv" and removed the glx module because the xserver was complaining. But this didn't change anything. The error messages are:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux Linuxbox 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 18:10:38 UTC 2009 i686
Build Date: 03 August 2009 08:45:00PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 10 21:03:11 2009
(++) Using config file: "xorg.conf.new"
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
error setting MTRR (base = 0xb0000000, size = 0x04000000, type = 1) Invalid argument (22)
Last edited by essence-of-foo (2009-08-10 19:10:58)

OC4J : Log4JLogger does not implement Log

Hi All,
I would like to have some information regarding the "does not implement Log" problem which occurs when I deploy my ear application. I use OC4J 10.1.3.0 version and when I try to deploy my ear by having "search-local-classes-first" option as "true", I get the exception listed at the bottom of this mail..
I saw the link http://wiki.apache.org/jakarta-commons/Logging/FrequentlyAskedQuestions,
tried to resolve the problem through class loaders but in vain.
I got struck with this and can anybody please help me in this regard.? Also please send me any diagnostic code which would help me to identify the classloader which tries to load these Log based classes.
Thanks
Raj
....................... Exception .......................
07/04/24 15:58:35 SEVERE: CoreRemoteMBeanServer.getEvents Could not retrieve remote events: Error deserializing return-value: org.apache.commons.logging.LogConfigurationException; nested exception is:
java.lang.ClassNotFoundException: org.apache.commons.logging.LogConfigurationExceptionjava.rmi.UnmarshalException: Error deserializing return-value: org.apache.commons.logging.LogConfigurationException; nested exception is:
java.lang.ClassNotFoundException: org.apache.commons.logging.LogConfigurationException
at com.evermind.server.rmi.RMICall.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMICall.java:110)
at com.evermind.server.rmi.RMICall.throwRecordedException(RMICall.java:128)
at com.evermind.server.rmi.RMIClientConnection.obtainRemoteMethodResponse(RMIClientConnection.java:472)
at com.evermind.server.rmi.RMIClientConnection.invokeMethod(RMIClientConnection.java:416)
at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:63)
at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:28)
at com.evermind.server.ejb.StatefulSessionRemoteInvocationHandler.invoke(StatefulSessionRemoteInvocationHandler.java:31)
at __Proxy6.getEvents(Unknown Source)
at oracle.oc4j.admin.jmx.client.MBeanServerEjbRemoteSynchronizer.getEvents(MBeanServerEjbRemoteSynchronizer.java:530)
at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.getEvents(CoreRemoteMBeanServer.java:311)
at oracle.oc4j.admin.jmx.client.EventManager.run(EventManager.java:199)
at oracle.oc4j.admin.jmx.client.ThreadPool$ConfigurableThreadImpl.run(ThreadPool.java:295)
Caused by: java.lang.ClassNotFoundException: org.apache.commons.logging.LogConfigurationException
at com.evermind.server.rmi.RMIClassLoader.findClass(RMIClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.evermind.io.ClassLoaderObjectInputStream.resolveClass(ClassLoaderObjectInputStream.java:33)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1544)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1466)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1699)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:479)
at javax.management.Notification.readObject(Notification.java:350)
at sun.reflect.GeneratedMethodAccessor100.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:946)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1809)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readArray(ObjectInputStream.java:1634)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1299)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1908)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at com.evermind.server.rmi.RMIProtocol$Version.unmarshallParameterDirectly(RMIProtocol.java:402)
at com.evermind.server.rmi.RMIProtocol$Version_1_0.unmarshallParameter(RMIProtocol.java:471)
at com.evermind.server.rmi.RMIProtocol.readObject(RMIProtocol.java:80)
at com.evermind.server.rmi.RMIProtocol.readValue(RMIProtocol.java:161)
at com.evermind.server.rmi.RMIClientConnection.handleMethodInvocationResponse(RMIClientConnection.java:794)
at com.evermind.server.rmi.RMIClientConnection.handleOrmiCommandResponse(RMIClientConnection.java:242)
at com.evermind.server.rmi.RMIClientConnection.dispatchResponse(RMIClientConnection.java:197)
at com.evermind.server.rmi.RMIClientConnection.processReceivedCommand(RMIClientConnection.java:179)
at com.evermind.server.rmi.RMIConnection.handleCommand(RMIConnection.java:154)
at com.evermind.server.rmi.RMIConnection.listenForOrmiCommands(RMIConnection.java:126)
at com.evermind.server.rmi.RMIConnection.run(RMIConnection.java:105)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
at java.lang.Thread.run(Thread.java:595)
07/04/24 15:58:35 WARNING: ApplicationUnDeployer.removeFiles WARNING: Unable to remove appDir C:\product\10.1.3\OracleAS_1\j2ee\home\applications\epcis : Unable to remove C:\product\10.1.3\OracleAS_1\j2ee\home\applications\epcisjava.io.IOException: Unable to remove C:\product\10.1.3\OracleAS_1\j2ee\home\applications\epcis
at oracle.oc4j.util.FileUtils.recursiveRemove(FileUtils.java:249)
at oracle.oc4j.admin.internal.ApplicationUnDeployer.removeFiles(ApplicationUnDeployer.java:146)
at oracle.oc4j.admin.internal.ApplicationUnDeployer.doUndeploy(ApplicationUnDeployer.java:117)
at oracle.oc4j.admin.internal.UnDeployerBase.execute(UnDeployerBase.java:91)
at oracle.oc4j.admin.internal.UnDeployerBase.execute(UnDeployerBase.java:72)
at oracle.oc4j.admin.internal.ApplicationDeployer.undo(ApplicationDeployer.java:222)
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:138)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
at java.lang.Thread.run(Thread.java:595)
07/04/24 15:58:36 WARNING: DeployerRunnable.run java.lang.ExceptionInInitializerErrororacle.oc4j.admin.internal.DeployerException: java.lang.ExceptionInInitializerError
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:139)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ExceptionInInitializerError
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:232)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1015)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:649)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:428)
at com.evermind.server.Application.getHttpApplication(Application.java:512)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1975)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1894)
at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1591)
at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:206)
at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:96)
at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:541)
at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:197)
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
... 4 more
Caused by: org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: Class org.apache.commons.logging.impl.Log4JLogger does not implement Log
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:532)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
at com.sun.faces.config.beans.FacesConfigBean.<clinit>(FacesConfigBean.java:28)
... 17 more
Caused by: org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: Class org.apache.commons.logging.impl.Log4JLogger does not implement Log
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:416)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
... 21 more
Caused by: org.apache.commons.logging.LogConfigurationException: Class org.apache.commons.logging.impl.Log4JLogger does not implement Log
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:412)
... 22 more

Raj,
your post is a bit confusing.
1. search-local-classes-first is a setting for WAR applications.
2. The exception seems to come from the EJB layer.
During deployment you might try to use the commons-logging shared library from Oracle AS/OC4J to solve this. Another approach might be to package the library in the archive you're using and referring it from the META-INF/Manifest.mf.
--olaf

Codec G729 Bearer capability not implemented

Hello everyone,
I am having the problem interconnecting Cisco Universal Gateway AS5400 Version 12.4(11)T4 with ACME Net-Net 4250 and the disconnect code cause was 65 which mean Bearer capability not implemented. This problem happened only when using codec G729 and it was working with codec G711. I took almost a half month for troubleshooting this but could not find the fault. Can anyone have any idea what could be the problem?
Please find the trace in attachment file for both G729 and G711.
Thanks,
Chandy

You should also have the debugs set for the 2 scenarios to see what's different about the SIP call processing on the router in the 2 cases.
debug ccsip message
debug ccsip info
debug ccsip error
should be good. Make sure you also do the following:
Router(config)#no logging console
Router(config)#no logging monitor
Router(config)#service timestamps debug datetime msec
Router(config)#logging buffered <buffer size> debugging
Router(config)#service sequence
Router(config)#no logging rate-limit

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

Functioning Monitor will not display with Mac Mini

I'm trying to get an IBM E74 CRT monitor working with an early 2009 Mac Mini. I have it connected with Apple's mini-DVI to VGA adapater. The Mac "sees" the monitor since with screen sharing I can see the Display System Preference when the monitor is attached. It shows the monitor as an IBM E74 and allows what appear to be appropriate choices as far as resolution and refresh rate are concerned. I tried many combinations of resolution and refresh rate with no difference in behavior.
The monitor always acts like no signal is detected (built it message on monitor display). This monitor works fine with a B&W G3 and a late 2007 MacBook Pro. Any ideas why the Mac Mini is not driving the monitor? Have tried all combinations cycling power on the monitor, connecting / disconnecting while the Mac Mini is power up. Have had the monitor connected and powered on when booting the Mac Mini. For whatever reason the monitor does not seem to work with the Mac Mini, but works fine with other computers.
The monitor despite its' age has pretty low time on it and is quite serviceable. Are there quirks with the VGA interface that we may be running into? I would like to get this combo working together if at all possible.

I would say the VGA interface did evolve somewhat over that time period. In particular, the thing that may have changed that could be the underlying cause of the problem is sync termination impedance has trended upwards. It's not unusual to find older monitors with low impedance on sync. Some even had 75 ohm impedance, which required a line driver for sync the same as for video.
It could be the IBM monitor has fairly low termination impedance and the mini is unable to provide sufficient output on the sync lines to drive TTL levels, whereas the MBP is doing better. You could check this with a simple ohm meter with the IBM monitor turned off. Ideally, for the mini, you would want to see a high impedance reading on H and V sync, like close to 2k ohms. If it's 500 ohms or less, then the mini may not be able to drive sync properly.
On an old monitor like that, it is likely to have old fashioned components with axial leads rather than surface mount components. If you are handy with a soldering iron, you could find the offending resistors and bring the monitor up to a more modern, high impedance standard of 1.8k to 2.2k.

Monitor does not come out of sleep Mac-Mini Mini-DVI to Dual DVI-D cable

I have an August 2009 Mac-Mini that I'm using with an Apple supplied Mini-DVI to DVI adapter along with a DVI-D Dual Link Cable connect to a Sceptre X7XV-Naga+ LCD monitor.
The monitor is going into sleep mode on its own with no way to disable this feature on the monitor itself. I've disabled sleep mode on the Mac-Mini in the power setting in System Preferences.
When in sleep mode and I move the mouse or press a key, the monitor will not come out of sleep mode. From other posts, I read that the issue might be that I wasn't using a Dual-Link DVI-D cable, so I bought one and installed such a cable. That has not resolved the problem. The monitor will not come out of sleep mode. When I have the monitor connected with a mini-display port to VGA adapter instead of a DVI-D cable, it will come out of sleep mode every time.
Message was edited by: Annorax64

I know it's a year later, but I'm not finding much through search.
I have the same exact problem. Difference being I'm using an iMac with 10.7.5.
Same video board and monitor - ATI Radeon HD 6750M video card connected via DisplayPort to Samsing S24A850DW.
I've tried two different mini-DisplayPort to DisplayPort cables and no change.
I think I read that 10.8.3 might fix the issue. Anyone that can confirm that, or has another solution?

UCCX: Silent monitoring is not working and recorded file is also not playing

Hi,
Running UCM 8.5 cluster with UCCX 8.5.
In CSD, silent monitoring is not working.
Windows XP OS is running on supervisor desktop. when i select the agent
then the silent monitoring icon will highlighted once i click on the icon,
after 5-7 seconds i am getting an error "Silent monitoring session has
failed".
Not able to playback the recorded files:
I can able to record and the file size is 2.6mb for approximate 3min
recording.When i tried to play from supervisor record viewer it is playing
but no voice is coming. And i downloaded using play & save option and
tried to play the .wav file but i can't hear any voice.
Problem is while playing back the recorded file. I can able to see the
recorded files in the UCCX.
Please help me out!!!
Thanks & Regards,
Krishna

It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this. I am running windows 8 on parallels.

Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

It was working untill i did the update

My w2207h HP Monitor is not working on my macbook pro with hdmi minidisplayport adapter. On Windows 7 via bootcamp it works. What can i do ?

As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !

If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility. Select the DVD and then hit the "New Image" button. Disk Utility should offer to create a disk image from the DVD. I would put that disk image on a USB drive connected to the Pro. You should be able to mount that image when you connect up to the Air. Hopefully BootCamp will be able to access that all through the process.
If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows. I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB.
I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see. But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive. While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem.

Diagnostic Monitoring is not implemented

Similar Messages

Maybe you are looking for