Diagonal line through the pen tool icon and blocking it's use.

I am trying to change a map.ai file. When I click on the pen tool and move the cursor to the map it shows the pencil tool with a diagonal line through it prohibiting me from using it. How do I get rid of the diagonal line and use the pen tool? In addition, at the top of screen underneath file, edit, etc. it says "No Selection" on the left side. This must relate to the problem as I can use the pen tool with a new *.ai file.
Thank you for your help.

Scott Falkner suggested I unlocked all 13 layers. It still did not work. Now what?
Thanks,
Paul

Similar Messages

  • How Do I make curved lines with the pen tool in after effects CS6

    Hello, so I have been following this video http://www.youtube.com/watch?v=vKzB-CFT0MI on how to make 2d intros in after effects and at the 2:20 mark he shows how he uses the pen tool to make curved lines around the elipse. I tried to do the samething myself, and couldent make the curved lines. I looked it up online and there were tutorials on how to make curved lines but they did not work the same way, and I could not make curves like he did.So if any of you know how to do curved lines like in the video, your help will be appreciated.
    Thanks !

    This is basic stuff and it's basically the same way Illustrator or Photoshop works with bezier paths. You'll find a lot of helpful information if you just type masking or mask in the Search After Effects Help field at the top right corner of the app.
    Adobe - Search: masking
    Directly from the Help Files: After Effects Help | Creating shapes and masks
    Mylenium.. sorry you thought it was an awful tutorial. I made it in under a minute just to show this member the very basic task of creating a mask with the pen tool and animating the shape. I'll try and up the quality of my quick replies to simple operations.

  • How to create a wavy line with the Pen Tool?

    Let me start by saying that I am a novice to Adobe CS4, including PS.
    I am trying to follow this tutorial: http://www.rnel.net/tutorial/Photoshop/11541 but I can not even get the pen to draw wavvy line. I keep get a straight line. To say the least, I am only able to complete creating the file.
    How do I create a wavvy line or lines using the Pen Tool?

    Check out this page from the Help Files:
    Draw curves with the Pen tool:
    http://help.adobe.com/en_US/Photoshop/11.0/WS08E4D386-15E9-4dcd-91E6-DF4219CC6D24.html

  • Diagonal Jagged Pixelation With Pen Tool and Sheared Typefont

    Hey guys, so I'm in the midst of making a type based logo right now and I sheared it to give it a bit of a diagonal edge. However, the diagonal lines are now noticeably pixelated and jagged. What I did was type out the name in the logo, then created outlines for it, then sheared it. I went over some of the lines with a pen tool stroke but it is still coming out the same. Here is my logos. The vertical diagonal lines in the E, K, R and I's are especially noticeable.
    This is my own personal music producer logo and I am pretty green with illustrator. So how do I make it as clean as this http://www.iamgrimsby.com/19614/1986395/logos/makj or some of these http://www.ruudvaneijk.com/logos
    Any Help would greatly be appreciated! Thank you guys so much!

    Hey Thanks for your help guys! So I gave downsampling a shot but it still ends up looking pixelated. The diagonal line on the E especially. I originally sheared this font to make it look italicized, but the shearing is creating this issue.
    Is it maybe just an issue of not using the shear function? When people use diagonal font do they typically just use the italiczed version of the font and not shear to achieve that look? If there is no italicized version of the font, am I just out of luck ?
    When compared side by side with pro logos such as here: http://www.ruudvaneijk.com/logos and http://www.iamgrimsby.com/19614/171236/logos/alesso, the logos are just much cleaner and professional looking. How do I achieve this super clean professional look? Am I just not working with the correct size or DPI?
    Here is another sample of my logo. Please help me guys. Thank you so much!

  • Pen tool icon not working

    When the pen tool icon is pressed a pencil with a circle (with a line through it) appears.  All the layers are unlocked. I am attempting to create a "cut through" for a design.  I would normally press the pen icon, the pen would appear and I would click along the desired shape and all the points would connect.  None of this is happening. Any ideas?

    Denise,
    You may try to start from the top of this:
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Why is Illustrator filling the areas between the paths created by the pen tool?

    First, I am very much a beginner with Illustrator (but have used other vector drawing programs) and always try to find the answer in the 531-page manual before bothering the community.  So my apologies for what is probably a beginner's mistake.
    I am marking up a drawing I imported from a raster file and and have ran Image Trace.  I am trying to draw 2 perpendicular lines with the pen tool.  However, when I complete the second line, it immediately files the space between the two lines with a black triangle.  When I draw a square, same result - instead of a square formed by 4 lines with blank space in the middle, it fills the space with black.
    Why would it do this?  Is there some setting that I need to turn off?  In the past, a pen line just drew a path and didn't create fills.
    I am using Illustrator CC on Windows 8.1 (Surface Pro 2) if that's relevant to anything.
    Thanks in advance!

    Hi Buzz,
    If i'm understanding correctly it sounds as though you have your colour applied to the fill instead of the stroke. All you have to do whilst having your shape selected or before you draw it is hit the arrow to the top right of that panel for it to switch to the stroke. Then click the white box with the red line through it for no fill in the areas you want no colour.
    I hope that helps!

  • Pen tool/path and content aware spot healing brush to remove cables (CS5)

    Tried to remove some cables from an image using Russel Brown's video making use of the pen tool/path and the spot healing brush with content aware.  I'm pretty sure I followed his tutorial exactly but it did not work satisfactorily.  Are there any other tweaks I should be using to remove these cables and replace them with the background details?

    Yes to all.
    Silkrooster  - Looks great!  However, I believe spot healing brush was the first I tried and got smudgy results, especially in area of the locks where there is a lot of detail behind the cables.  Found the patch tool works best, but not where there is a lot of detail behind the cables.
    Fosse - Well, the bow of the ship going through the Panama Canal at 6 AM in the morning is a popular place, very crowded, and not one of them a photographer.  I was lucky enough to get the last spot which was dead center, but in front of the cables.  I tried to prevail on some people next to me to trade spots, but none were willing ($##$!!!&& b---ds) and they didn't even have cameras.  However, will keep your suggestion in mind about taking two shots for the next time...and will have to get up earlier.
    I think if I want to really make this work, I will have to do a lot of work, probably using a combination of all these methods.
    Thanks to you all.
    By the way, Re my question on screens without a reply button...when I click on a response, it appears without any reply button.  How do I get a screen showing the reply button without entering a new question, cancelling out of it, and then clicking on a response, which is the only way I found to get a screen showing the reply button.

  • Is there a hotkey to break the handles of points while you're using the pen tool?

    When you use the pen tool, it smooths the points as you add them, but sometimes I don't want that, So far, the only way I've been able to combat this is by using the pen tool, pressing V to switch to the selection tool, clicking elsewhere to deselect the path, then pressing P to use the pen tool again, and then selecting the end point again.
    This process is becoming very annoying over the course of long projects, and I'm hoping that someone will be able to solve it for my.
    (I specifically want the hotkey for Mac, but it would be good if you could give the PC hotkey too for other people looking at this.)

    Use the Alt-key to switch to the anchor-point-conversion tool temporarily. Use the command key to switch to the last used selection tool temporarily

  • Using the pen tool, how best should I build or construct this image?

    Hello,
    I'm trying to recreate a certain image with the pen tool.
    I have already tried using Live Trace using the "Simple Trace" setting. Live Trace did a pretty good job but not with enough accuracy or fidelity to the original image as I would like.
    I am pretty rusty with Illustrator now, but I remember from past lessons that the basic idea is that artwork in Illustrator is divided into layers, objects, and elements within objects. But one of the biggest principles with Ilustrator is the order these layers, objects, and elements are stacked. Elements are stacked to create an object. Objects are often stacked, each object on its own layer, to create the entire piece of artwork.
    Also, the lower an element, object, or layer is in a stacking order, the further towards the back it appears in the image.
    Also, the higher an element, object, or layer is in a stacking order, the closer to the front it appears in the image.
    So, in Illustrator, you don't so much draw or paint a piece of artwork, but, instead, creating artwork in Illustrator is more a matter of building it or constructing it.
    So, with all that said, below I have an object I would like to create with the pen tool. It is a fleuron. It is at least fairly complex.I am not sure how to build it or construct its parts. What would come first, second, third? What would be on the bottom layer, middle layer, top layer, etc.? 
    I know there is no one way to reproduce this object with the pen tool. Whatever way you would use or would like to share is fine. I guess, more specifically, I'm not afraid of rigor and working hard, but I'm also not necessarily looking for rigor. Instead, what I am looking to do is work smartly and efficiently. I'm looking for what might commonly be considered "best practice." 
    So, how would you advise I approach the object below? How should I build or construct it?
    Thanks!  : )

    As for the simple graphic itself, this is what I would end up with:
    One Group containing:
    One red-filled, unstroked Compound Path consisting of three subpaths.
    One white-filled, unstroked Compound Path consisting of 18 subpaths.
    The reason I would compound the red paths and the white paths is simply so I could apply to them different fills with one move, should I want to.
    The reason the two Compund Paths would be grouped is simply so the whole graphic can, when finished, be moved, rotated, scaled, flipped, skewed (i.e.; transformed) as if it were a single object. (Which it would be; a Group is a logical object, just as a "set" is a logical object.)
    As for how I would actaully draw the graphic:
    First I would roughly evaluate it to get an idea of what I want to end up with in terms of clean, tidy, paths (as already describe above.)
    Second, I mentally devise a "plan of attack" by which to achieve that; just studying the shapes a little more deeply for anything that can be exploited to minimize the work:
    Are there any repetitive elements of the shape that can be accomplished by duplication, moving, scaling?
    Is there any symmetry that can be accomplished by duplication and flopping?
    Is there any simple geometry that can be accomplished with basic shape prmitives (whole or partial ellipses, rectangles, polygons)?
    Third, I always try to also consider whether the process of drawing the current graphic and/or portions of it might be of future use to me, and if so, can I exploit other software features to save me time and effort later. For example, consider a single one of the ess-shaped "coils" of the middle tapered "spiral" grouped together with its white highlight. Such a graphic, colored in black and white and stored as an ArtBrush with its Colorization set to Hues & Tints would let me stretch and scale that basic shape along other-shaped paths. Similarly stored as a PatternBrush, it might do multi-duty for many things suggestive of coils, like rope or jewelry chains.
    Then I just start drawing the necessary paths, using my default Graphic Style (.25 black stroke, no fill). As I proceed, I store (as Brushes, Symbols, etc.) any intermediate things that I think I might find useful later. For the graphic at hand, I then optimize the paths I've drawn by combining them (cutting, joining, path operations) into the fewest, cleanest, and simplest paths necessary to define the shapes. I then store the finished graphic as a Symbol, Brush, etc. if I think it might be of use later.
    Regarding Layers, Groups, etc., etc:
    It sounds like you (like many beginning AI users) are way over-thinking the matter of stacking order. Yes, it's good to use some sensible amount of organization as your illustrations and designs become more elaborate, but you don't have to fret so much over it. The principles are very very simply.
    Layer really don't even enter into my mind when creating such a graphic, because the paths of which it consists are all going to be grouped, and all the contents of a Group have to exist on the same Layer anyway. Multiple Layers would only come into play when this whole graphic is used as one element in the overall page layout. For example, suppose several instances of this object will exist on a page layout to serve as dividers between ads or stories arranged in columns in a page layout. I may choose--if it makes organizational sense to me--to put all the copies of this object on a Layer dedicated to them. The Layer on which they reside may or may not include other graphics; it's just a question of what makes organizational sense and editing convenience to me while I'm working the file. For example, having the copies of this graphic on a separate Layer would allow me to lock that Layer to avoid accidently selecting the graphics when I'm editing text objects that I've organized on another Layer.
    Don't think of Layers as some oppressive "right or wrong" thing that you have to decide upon at the start of every little thing you draw. It's nothing but an organizational convenience that is driven almost entirely by common sense. The mechanics of it are really very very simple in principle.
    Look: Everything you create or import in an Illustrator document is an object. Just like sheets of paper in a tablet, each of those objects (each path, text object, raster image) is going to reside somewhere in the z-order (think front to back) of the document's object stack. You can't do anything to prevent that. It's the way the program works. The file is basically just a list of things that the output device has to draw. Being a list, it has a first object, a second object, and so on. Objects higher in that list are nearer the "front"; objects lower are nearer the "back." Normally, objects in front obscure objects behind them, wherever they "overlap."
    Now, considering that what you have is just a list of objects, as that list grows and grows, doesn't it eventually just make sense to be able to "bracket" or "label" contiguous portions (contiguous is key here) of that list for organizational and manipulative purposes? That's all Groups and Layers are; brackets around sections of the list.
    Consider that an Illustrator file (like most computer files you create) is really just a text file. So suppose you have written a technical manual in a word processing program. Would you write that manual as one big, honkin' text string, or would you "bunch together" contiguous portions of the story under some labeling scheme of subheads? After that, wouldn't you similarly "bunch together" contiguous subhead sections as chapters?
    So you can think of Groups as "subheads," and Layers as "chapters" in your Illustrator document's list of objects.
    Sure; if you're working on a page layout document, sometimes it makes sense to go ahead and set up some of this structure at the start (just as when writing a book, it makes sense to start with an outline). So you might go ahead and define a Layer for printer marks, another for the diecut, another for text, another for images, another for background fills.
    The very next designer might decide to structure the very same project a little differently. He might, for example, decide there's no reason not to keep the text objects on the same layer with the raster images. There's no hard & fast right & wrong her. You do what makes sense for the project at hand.
    Now in this context, back to your simple graphic: I don't need a PrinterMarks Layer, a DieCut Layer, or a TextObjects Layer to draw this graphic. I just need the default Layer 1. For convenience, I may want to add a TraceThisStuff Layer onto which I put the original raster image, just so I can conveniently isolate it (lock it, dim it, etc.) while drawing the paths on Layer 1. On the other hand, I can really just as easily leave the raster image that I want to trace on Layer 1 and reduce its opacity and lock/unlock it at the object level. It's up to me.
    But for that matter, revisit my "third level" of evaluation described above. In reality, I would very likely not even start drawing this graphic in the document for which it is intended. I would just as likely open an existing JET_Dingbats.ai or a JET_Ornaments.ai or CustomerName_StyleGraphics.ai file or template, draw the graphic there and when done, just copy it and paste it into the current document file. That's how you, over time, build yourself a reasonably organized "personal library" of re-usable resources that save you countless hours of repetitive work in the future.
    JET

  • Adobe Reader deselects the pen tool after making a single mark. How do I fix this?

    I have a Surface Pro 2 tablet that deselects the pen tool after I make any kind of mark with it. It works occasionally with the mouse but not the stylus. For example, if I were to write a "41", I'd have to make one stroke, then select the pen tool, and then make the other stroke  to complete the "4", select the pen tool again, and then write the "1".
    The Adobe Reader is updated to the latest firmware (11.0.10).

    Wow lol I think that might have been the issue I pressed it a few times and it stopped, thank you!

  • Drawing a curved line using the pen tool, dragging the text cursor over the line but will only give me a small area to write in, in-between a circle and a circle with a cross in?

    Drawing a curved line using the pen tool, dragging the text cursor over the line but will only give me a small area to write in, in-between a circle and a circle with a cross in?

    If you change your tool to the "Direct Selection Tool" (A) then you should be able to adjust the area for you to type in...

  • How do I turn off the alt scroll zoom?  When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    How do I turn off the alt scroll zoom? 
    When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • How To Use The Pen Tool in Adobe Illustrator, Photoshop and InDesign CS6 | Creative Suite Podcast: Designers | Adobe TV

    In this episode of the Adobe Creative Suite Podcast Terry White shows how to use the Pen Tool to create Art, Frames and to trace images in Photoshop CS6. If you've never used the Pen Tool before, this is your video!
    http://adobe.ly/STegFg

    With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

  • The lines I create with the pen tool are not showing up in After Effects.

    I'm working on a project where I need straight lines. I've added the lines using the pen tool on solid layers, but they are not showing up before or after rendering. I can see where they are supposed to be when I isolate the layer they are on. I have the lines at one pixel, solid white and the layers are on top of everything else. I took a screen shot. Can anyone help me?

    Well, I am still not 100% sure why the pen tool lines/masks are not showing up but I was able to work around it. I already had the stroke effect applied and set to all masks. Looking into this though, it seemed that they were only not showing up on the new solid layers I had created. I duplicated the layers the masks were  working on instead and it seems to resolve the problem for now. Thanks for your help!

  • Why does the pen tool remove previous line when I add new anchor points??

    Why does the pen tool remove previous lines??
    Video here:  http://youtu.be/8AmPUkD88h0 
    It removes the hairline on the face, when I add more anchor points. Why? And how do I correct it?

    The ins and outs of the new and changed behaviors in the re-engineered pen tool have been disussed here on this forum and I'm sure a little detour to the help files will also shed some light on this...
    Mylenium

Maybe you are looking for