Dial plan: Can we change the redirect number (sip-sip)?
Hello Scott Page/Alexei/Dirk Anyone.
I have a question on dial plan:
Call flow: A---cucm----pgw----voicemail
B-----|
Its a sip to sip call, what i need to do is change the redirect number or rather add a digit to the redirect number at the PGW side.
For instance:
A number: 902228990
B number: 902228996
Redirect number: 92228996 --->Here i want to change it to 902228996
pgw patch: 9.8.2 "Patch:"CSCOgs014/CSCOnn014""
bash-3.00$ uname -a
SunOS tcs-tza1 5.10 Generic_127127-11 sun4u sparc SUNW,Netra-440
I checked from the cisco website but i think its only for isup sip calls only but not sure.
numan-add:fullnumbertrans:svcname="Service Name",numbtype="Number Type", digstring="Original Digits",
translatednum="Translated Digits"
Where numtype can be choose 3 for redirect number.
numtype—Identifier for the number type (1-5), it is one of the following values: 1—called party number 2—calling party number 3—redirecting number 4—calling party number and redirecting number 5—original called number
Can some help me out with the dial plan configuration?.
Regards,
Aby
Guys,
This configuration would work?, please let me know
1. mml> numan-add:service:custgrpid="DP00",name="BATMANredirect"
2. mml> numan-add:fullnumbertrans:svcname="BATMANredirect",digstring="92228996", translatednum="902228996",numtype="3"
numtype=3-->redirect number
3. Adding a result type of NUM_TRANS:
mml> numan-add:resulttable:custgrpid="DP00",name="results",resulttype="NUM_TRANS", dw1="BATMANredirect",dw2="3",dw3="3",setname="setname3"
dw2--->number type hence i put it 3
dw3--->NOA--->hence i put it as national ie 3,
dw4--->Dialplan?-- can i avoid this?
4. mml> numan-add:resulttable:custgrpid="DP00",name="noar",resulttype="R_NUMBER_TYPE", dw1="4",setname="setname3"
dw1===>NOA again, i put it as dw1="4" as national.
Can any of you help me if this would do the trick or anything else needs to be added?.
Thanks and appreciate your time.
Regards,
Aby
Similar Messages
-
Can we change the employee number on the employee master data form ?
Hi,
Simple question but can we change the employee number on the employee master data form ? We need to use the same employee numkbers from another system but just cannot interact with the employee no. in SAP 2007 ?
Thank you,
MBYou canu2019t modify the employee number. It is assigned by the system sequentially.
But you can define a user defined field to store the other systemu2019s identifier or use (and even rename) some other field to store this information. -
How can I change the phone number that's used for my iMessages
How can I change the phone number that's used for my iMessages
I Know but i did a number port and the iMessages is showing up using the original number that I had when I first purchased this phone from tmobile
-
How can I change the phone number for messaging and FaceTime?
How can I change the phone number for messaging and FaceTime?
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
HT4534 How can I change the contact number for facetime
My face time on the imac, contact number is set to my other iphone. I would like to change the contact number to one of my other iphones? How can I achieve this?
Thanks all for your responses.
I tried to "order" Siri to change my husband's default number and whatever syntax I used for my request Siri responded with a web search on how to set favorites.
So I ended up deleting the work number from my husband's contact information and I used Siri to call him a couple of times. After 24 hours (random time frame) I added his work mobile back to his contact information, but not in the favorites.
SIri now dials his home number because it's the only one in the favorites.
I'll add it to the favorites in due course. -
How can i change the phone number on my ipod to a different number
how can i change my phone number on my ipod to a different number than my i phone
Only by getting a different iPhone and using your Apple ID for Messages/FaceTime on your iPod. The iPod (and iPad) only have a phone number for Messages and FaceTimeT if the Apple ID used for those services on the iPad is also used on a Phone witrh iOS 6 or later.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage -
I can't change the maximum number of calls and busy in 8941
Hi Experts,
I have 8941 model with Camera and I can't make a second call, I tried to change the maximum number of calls, but I couldn't change it's 3 just by default,
Is there any way to solve this issue?
Thanks
Mohammad SaeedHi Mohammad,
A firmware or cucm upgrade is required as per the following
https://supportforums.cisco.com/document/97916/sccp89459-2-2qedinstallpdf
HTH
Manish -
Can we change the partner number based on the reason in CIC0 in CRM ?
Dear Experts,
Can we change the responsible partner number based on the reason in CIC0 in CRM ?
regards,
Abhijit G. Borkar
Edited by: Abhijit Borkar on Jul 10, 2009 6:46 AM
Can it be done by using 'Actions' ?Hi Abhijit,
Yes you can do this a number of ways:
action
badi - partner or order
event - custom function module
Remember that the partner determination must allow for this partner to be changed.
Cheers
Andrew -
Diskpart Can we change the DISK Number within WinPE
Diskpart.exe
list disk
select disk 1
I want to know if its possible to change the disk number in Diskpart within WinPE? Instead of disk 1, is it possible to make it disk 5 ?
N.A.MalikThe disk # is based on the amount physical/virtual disks configured at the time of command line run. In a virtual environment, you can add disks to the virtual machine and then change the command to DISK 5. In a physical environment it is not possible
to do so unless you have 6 (disk count starts at 0) physical disks connected to the SATA/IDE ports.
_JoeG
Dell - Systems Integration Consultant
Twitter:
@8bits1byte
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How Can I change the ANI number by Editor CCX?
Hi team,
I must change the ANI number before send for CUCM.
Exemple:
ANI: 5000
My script is working properly, but I need to collect some digits from user and add on ANI like this:
ANI:5000 + 12345678910, So the ANI must be : ANI = 5000"12345678910"
DNIS: 5005 (CUCM has a route pattern that will send the call to router. There, I need to receive the ANI number changed)
Can you help please?
thanks.This is not something UCCX can do.
CUCM can manipulate the ANI with Calling Party Transformation Patterns.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches. -
How can i change the serial number?
Hi All,
Does anyone know how can i change the flash builder serial number?
Thanks in advance,
LiorDue to a licence problem we applied for a refund and then re-purchased FB4.5 licences. Now I want to change to use the new license code but when I try to deactivate it says "Deactivation was not successful. Please try again. Error code #194:8".
Perhaps this is because my old license code has been invalidated by Adobe or something.
How can I implement the new license code?
(I suppose I can just leave the old code if there's no easy way to update it). -
How can I change the phone number
I have 4S, which was registered with old phone number. How Can I change the number in "Settings - phone" to the new sim phone number? Thanks
Turn your phone off, install the sim with your new number, turn your phone on...does it appear correct now?
-
My Grandaughter set up my ipad, and downloaded her number onto it. I can't change this to my phone number, I can only change the email address.
I tried changing Settings, but the number in Messages is still showing as hers.
Help!!Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
How can I change the default number for a contact when using Siri
My husband has one mobile for work, one for home, both are in my favorites. When i'd ask Siri to dial his number, it would always ask me which one to use. Recently when calling him Siri asked if I would like to use his work number as the default and I mistakenly agreed. Now Siri never asks which number to dial and always dials the work number. How can I change that? I would like to make the default the home number.
Thanks all for your responses.
I tried to "order" Siri to change my husband's default number and whatever syntax I used for my request Siri responded with a web search on how to set favorites.
So I ended up deleting the work number from my husband's contact information and I used Siri to call him a couple of times. After 24 hours (random time frame) I added his work mobile back to his contact information, but not in the favorites.
SIri now dials his home number because it's the only one in the favorites.
I'll add it to the favorites in due course. -
How can I change the VAT number in my account?
I want to change my VAT number in my account,
how can I change it?Hi Dja Europe,
If you select the following, you should be able to get Chat support who can assist:
Creative Cloud
Adobe ID and signing in
Click on "Still need help? Contact us"
Thanks,
Eshant Jindal
Maybe you are looking for
-
Issue with hierarchy node variable and multiple SAP hierarchies
Hello experts, We are currently facing an issue when using two SAP hierarchies in Web Intelligence and one of them is restricted with a hierarchy node variable. The systems we use are a SAP BI 7.01 (SPS 05) and a Business Objects Enterprise XI R3.1 S
-
I tried opening it in safe mode and none of the other help tips in the database on firefox crashes when I open it apply to me. I also ran a couple of virus programs to check for any infections and found nothing. I had been having issues with java pre
-
AR invoice with payment can replace AR downpayment invoice
We issue Proforma Invoice (Quote), then issue AR downpayment to collect all payments before we generate legitimate Drop Ship invoice to avoid any non-collect payment. Not sure "AR invoice with payment" need generate invoice first or in the same time
-
Sender JDBC Adapter hang after network problem ?
Hi, I got problem with Sender JDBC Adapter. in the normal condition it is working fine. no problem at all. The problem coming after network connection problem within XI and database for about more than 24 hours. After the connection resume the Sender
-
How to Get the numeric equivalent of Year and Month with this format....
Hi Experts! I just would like to know how to get the numeric equivalent of the Year and Month if the given format is like this.... 31-May-07 where: 31 is the Day May is the Month 07 is the Year Is there a function in ABAP to do this? I wouldn't mi