Dialling plan that supports star services for the UK

Wendy has sent me a dialling play that supporrts *21, but I need a UK dialling plan that supports all fo the UK star services as below - Can anyone help please?
SET ANONYMOUS CALL REJECTION *227#
CHECK ACR *#227#
CANCEL ACR #227#
Call Divert on all calls
SET CALL DIVERSION * 21 * [phone number] #
CHECK CALL DIVERSION * # 21 #
CANCEL CALL DIVERSION # 21 #
Call Divert on no reply
SET DIVERSION ON NO REPLY * 61 * [phone number] #
CHECK DIVERSION ON NO REPLY * # 61 #
CANCEL DIVERSION ON NO REPLY # 61 #
Divert on no reply: *61*number*wait# == (Extra System Y facility only - does not work on 410567 as of Dec 2011)
Wait is two digit time in seconds (05 to 60) before redirection takes place.
Call Divert on busy
SET DIVERSION ON BUSY * 67 * [phone number] #
CHECK DIVERSION ON BUSY * # 67 #
CANCEL DIVERSION ON BUSY # 67 #
Call Divert on no reply or busy
SET DIVERSION ON NO REPLY & BUSY * 66 * [phone number] #
CHECK DIVERSION ON NO REPLY & BUSY * # 66 #
CANCEL DIVERSION ON NO REPLY & BUSY # 66 #
Call Minder (Voicemail)
CALL MINDER SERVICE 1571
Call Waiting
SET CALL WAITING * 43 #
CHECK CALL WAITING * # 43 #
CANCEL CALL WAITING # 43 #
Caller Display
SET CALLER DISPLAY DATA ON *234#
CHECK CALLER DISPLAY DATA *#234#
CANCEL CALLER DISPLAY DATA #234#
Caller ID
WITHHOLD CALLER ID 141 [phone number]
RELEASE CALLER ID 1470 [phone number]
CALLER RETURN 1471
ERASES LAST NUMBER GIVEN ON CALLER RETURN 1475
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Charge Advice
SET CHARGE ADVICE (BEFORE A CALL) * 40 * [phone number] #
SET CHARGE ADVICE (FOR ALL CALLS) * 411 #
CHECK CHARGE ADVICE *# 411 #
CANCEL CHARGE ADVICE # 411 #
Choose to Refuse
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
I
ncoming Call Barring
SET INCOMING CALL BARRING * 261 #
CHECK INCOMING CALL BARRING * # 261 #
CANCEL INCOMING CALL BARRING # 261 #
Miscellaneous
CHECK WHICH SERVICES ARE ACTIVE * # 001 #
BT LINE TEST & RINGBACK FACILITY 17070
REDIAL LAST NUMBER DIALLED **0
Outgoing Call Barring
SET OUTGOING CALL BARRING * 34 option #
CHECK OUTGOING CALL BARRING * # 34 #
CANCEL OUTGOING CALL BARRING # 34 option * [PIN] #
Reminder Call Service
SET REMINDER CALL (using 24 hour clock with 4 digits) * 55 * [time] #
CHECK REMINDER CALL * # 55 #
CANCEL REMINDER CALL # 55 #
SET REGULAR REMINDER CALL * 56 * [time] * [day option] #
CHECK ALL REGULAR REMINDER CALL * # 56 #
CANCEL A REGULAR REMINDER CALL # 56 * [time] * [day option] #
CANCEL ALL REGULAR REMINDER CALLS # 56 #
Day options numbers: Monday - 1, Tuesday - 2, Wednesday - 3, Thursday - 4, Friday - 5, Saturday - 6, Sunday - 7, Monday - Friday: 8 Every Day - 9.
Remote (Smart) Call Divert on all calls
SET REMOTE CALL DIVERT ON ALL CALLS * 44 * [PIN] * [your full phone number] * [number to divert to] #
CHECK REMOTE CALL DIVERT ON ALL CALLS # 44 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON ALL CALLS * # 44 * [PIN] * [your full phone number] #
Remote (Smart) Call Divert on no reply
SET REMOTE CALL DIVERT ON NO REPLY * 64 * [PIN] * [your full phone number] * [phone number to divert to] #
CHECK REMOTE CALL DIVERT ON NO REPLY # 64 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON NO REPLY * # 64 * [PIN] * [your full phone number] #
Remote (Smart) Call Divert on busy
SET REMOTE CALL DIVERT ON BUSY * 65 * [PIN] * [your full phone number] * [phone number to divert to] #
CHECK REMOTE CALL DIVERT ON BUSY # 65 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON BUSY * # 65 * [PIN] * [your full phone number] #
Ringback
SET RINGBACK [phone number] 5
CHECK RINGBACK *#37#
CANCEL RINGBACK #37#
SET RING BACK INHIBIT *02*37#
CHECK RING BACK INHIBIT *#02*37#
CANCEL RING BACK INHIBIT #02*37#
CALL ROUTING VIA BT
(when using another provider) 1280

Hi Jon,
After thorough discusiion with engineering team and marketing team, we have decided to support most star services you requested except the following items. I have created a PMF for it. Please send me an email at [email protected]. I will reply you with the PMF.
Call Minder (Voicemail)
CALL MINDER SERVICE 1571
Call Waiting
SET CALL WAITING * 43 #
CHECK CALL WAITING * # 43 #
CANCEL CALL WAITING # 43 #
Caller ID
WITHHOLD CALLER ID 141    [phone number]
RELEASE CALLER ID 1470 [phone number]
CALLER RETURN 1471
ERASES LAST NUMBER GIVEN ON CALLER RETURN 1475
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Choose to Refuse
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Incoming Call Barring
SET INCOMING CALL BARRING    * 261 #
CHECK INCOMING CALL BARRING    * # 261 #
CANCEL INCOMING CALL BARRING    # 261 #
REDIAL LAST NUMBER DIALLED **0
Outgoing Call Barring
SET OUTGOING CALL BARRING * 34 option #
CHECK OUTGOING CALL BARRING    * # 34 #
CANCEL OUTGOING CALL BARRING    # 34 option * [PIN] #
Reminder Call Service
SET REMINDER CALL (using 24 hour clock with 4 digits)    * 55 * [time] #
CHECK REMINDER CALL * # 55 #
CANCEL REMINDER CALL # 55 #
SET REGULAR REMINDER CALL    * 56 * [time] * [day option] #
CHECK ALL REGULAR REMINDER CALL    * # 56 #
CANCEL A REGULAR REMINDER CALL    # 56 * [time] * [day option] #
CANCEL ALL REGULAR REMINDER CALLS    # 56 #
Day options numbers: Monday - 1, Tuesday - 2, Wednesday - 3, Thursday - 4, Friday - 5, Saturday - 6, Sunday - 7, Monday - Friday: 8 Every Day - 9.
Ringback
SET RINGBACK [phone number] 5
CHECK RINGBACK   *#37#
CANCEL RINGBACK #37#
SET RING BACK INHIBIT *02*37#
CHECK RING BACK INHIBIT *#02*37#
CANCEL RING BACK INHIBIT #02*37#
Best regards,
Wendy

Similar Messages

Re: How to keep phone #on prepaid plan if u drop service for 2 months, then resume?

Re: How to keep phone number on prepaid plan if you drop service for 1-2 months and then resume?
Thanks for the replies !
I pasted in the link to the discussion I started earlier. Dont see a way to respond to replies. If there is a way to do this, would love to know pls!
I may want to drop the monthly service for 2 months or more. So the offer to reserve a number for $100 is actually more appealing than paying 49 monthly for more than 2 months. I just cant find a way to pay it that doesnt get lost in monthly payments
I have tried the cust service number for pre paid. It's menu driven, no option at all to speak with anyone, and no option that matches my question. It's nothing more than a set of text that is accessed by the telephone. One way communication, no chance to get any help :-( Disappointing. And Chat is still busy :-(
Thanks for reading and any tips!

If you don't get the option to reply then refresh and log back in, your login most likely timed out.
As for calling in I just called
Phone Number
888-294-6830
I waited 2 mins 36 seconds with no menus and got a human.

Cannot start the "Internet Directory" service for the infrastructure tier

Hi, my "Internet Directory" service for the infrastructure tier cannot be started. I'm using 9iAS for Form service. Could anybody help me??
Thanks much in advance!
FreeBirdRita

Hi Brain,
what's version of SQL Server that you have installed and what's your operationg system version info?
If you are running SQL Server 2008, which is not supported on the Windows Server 2008/2008 R2 domain controll (DC), even on Windows Server 2003 DC, there are limitations. Microsoft does not recommend to install SQL Server instances and DC on the same server,
for more information, see Install SQL Server on a Domain Controller (http://msdn.microsoft.com/en-us/library/ms143506.aspx#DC_Support).
There are some threads in the forum talked about installing SQL Server and DC on the same server, here are some for your references:
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/1a2963ff-90d7-4bba-97ce-fa15f70fb6a8/
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/981ef726-d04a-4063-8008-cc7bbad854ab/
Hope this helps. Please feel free to let me know if you have more questions.
Best Regards,
Chunsong Feng [MSFT]
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT4847 If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free? So that you are rewarded for the additional devices?

If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free? So that you are rewarded for the additional devices?
If this multi purchase if devices is not rewarded with a larger cloud storage being available, would it then be best to have several separate cloud accounts?
Would you lose the ability to mesh data between devices??? Of could you choose to share a smaller part of the data and yet save the rest of the device data to their own cloud? So in other words, split a devices stored data between 2 different icloud accounts? One community iCloud account for partial data and individual account for data that does not need to be shared with the other devices, however it needs to be backed up. The simpler solutions would be If you have several Apple devices feeding to the same iCloud account, an amount of storage made available per device (ie: 5 units of storage free per device)
~ So that you are rewarded for the additional Apple devices by giving 5 more units of storage or backup space per device

Nobody here is an Apple employee, and my Christmas Season has been great, thanks very much. Neither am I jealous, I just abhor the fact that so many people these days expect more and more for free, in addition to what they already get for free. First world problems...
Obviously Apple do consider people with multiple devices, since the whole purpose of the service is to keep data in sync across multiple devices. Clearly, after consideration, Apple decided to give 5GB of storage for free and provide customers with the option to buy more storage if they want/need more, in line with competing services.
Everyone has their own set of unique circumstances but does that mean everyone should be rewarded with extras for free? At what point should it be considered acceptable to actually pay for additional extras you want?
And by the way, somebody expressing a different opinion, and discussing people's expectations is not being rude. Aren't you from the country that supposedly takes 'freedom of speech' rather seriously?

WCF Published Orch - Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding

I have an orchestration published as a web service. It was working fine on our test environment, we deployed to production, and now getting this error. The website wouldn't go in the BizTalk MSI, so we copied the files. We reset the Authentication
to match the test system (we are using Basic Auth).
When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error.
I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc.
In both environments, we have a customer calling this webservice.
Also, I don't know what it means "scheme http". We are using https:... on the URL.
I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings.
Thanks,
Neal Walter
http://MyLifeIsMyMessage.net
Web.config:
    <services>
      
      <service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
        <endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
        
      </service>
    </services>
</system.serviceModel>
    <system.webServer>
        <security>
            <authorization>
                <remove users="*" roles="" verbs="" />
                <add accessType="Allow" users="myCustomer" />
            </authorization>
        </security>
    </system.webServer>
Server Error in '/eSecuritelIn' Application.
Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
base address schemes are [https].
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
the exception stack trace below.
Stack Trace:
[InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
are [https].]
   System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
   System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
addBaseAddress) +1082
   System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
   System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
   System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
+36
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
[ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation.
The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +901424
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.0.30319.272

When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
Are you not using the same Binding file?
Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
Old: binding="mexHttpBinding"
New: binding="mexHttpsBinding"
web.config snippet:
<services>
<service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
<endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
<endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
</service>
Also look into the below article- How to fix: "Could not find a base
address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
Moving to https = Could not find a base address that matches scheme
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Where can we get the list of predefined services for the notification of events/signals

We have a sample plugin docwatch which uses the responder to notify in case a new doc is created/saved/doc closed etc.
I want to know if I can get the similar set of services for the text frame
eg: Typing a text should generate the notification
Deleting a text shoud generate a notification( in the form of alert window or something)
Also, for pages,frames etc.
Where can we check the list of default services available for these or can we do it some how in code?

Hi Eton,
To check the instances which have ran today, you can use the below query in query builder.
SELECT SI_NAME,SI_ID FROM CI_INFOOBJECTS WHERE SI_INSTANCE=1 AND SI_STARTTIME > '2014.08.20 00:00:00' Order by SI_STARTTIME DESC
To check the instances which would be running in the future, that means you have recurring schedules. Check for the SI_NEXTRUNTIME to get the details of instances which will run in the future as per the recurrences.
Thanks,
Prithvi

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

Camera RAW does NOT yet support raw files for the new Canon Sureshot S95

Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asap

Hello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

[HELP] Error: "JDBC theme based FOI support is disabled for the given data"

Hi all,
I have already set up MapViewer version 10.1.3.3 on BISE1 10g OC4J server. I am current using JDK 1.6. I create a mvdemo/mvdemo user for demo data.
The MapViewer demo is running fine with some demo without CHART. But give this error with some maps that have CHART like: "Dynamic theme, BI data and Pie chart style", "Dynamic theme and dynamic Bar chart style". The error is:
----------ERROR------------
Cannot process the FOI response from MapViewer server. Server message is: <?xml version=\"1.0\" encoding=\"UTF-8\" ?> <oms_error> MAPVIEWER-06009: Error processing an FOI request.\nRoot cause:FOIServlet:MAPVIEWER-06016: JDBC theme based FOI support is disabled for the given data source. [mvdemo]</oms_error>.
----------END ERROR------
I searched many threads on this forum, some point me to have this allow_jdbc_theme_based_foi="true" in mapViewerConfig.xml and restart MapViewer.
<map_data_source name="mvdemo"
jdbc_host="localhost"
jdbc_sid="bise1db"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
/>
Error Images: [http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png|http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png]
I have this configuration, but no luck. Could anyone show me how to resolve this problem?
Rgds,
Dung Nguyen

Oop, i managed to have this prob resolved!
My prob may come from this I use both scott and mvdemo schema for keeping demo data (import demo data).
Steps i made to resolve my prob are:
1) Undeploy MapViewer from Application Server Control (http://localhost:9704/em in my case)
2) Drop user mvdemo
3) Download mapviewer kit from Oracle Fusion Middleware MapViewer & Map Builder Version 11.1.1.2
4) Deploy MapViewer again
5) Recreate mvdemo and import demo data
6) Run mcsdefinition.sql, mvdemo.sql with mvdemo user (granted dba already)
7) Edit mapViewerConfig.xml
<map_data_source name="mvdemo"
jdbc_host="dungnguyen-pc"
jdbc_sid="bise1db"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="!mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
/>
Save & Restart MapViewer
And now, all demos run fine. Hope this helpful for who meet prob like my case.

What is the Smartnet service for the 2504 license upgrade LIC-CT2504-UPG ?

Hi guys,
Can some one explain me what is this service for ? I have the LIC-CT2504-UPG, with the LIC-CT2504-5A (5 AP licenses adder) and I don't understeand what are the SMARTNet services for this licenses ?
Are they needed if I already have the SMARTNet service for the hardware controller ?
Do these services provide something additional on top of the hardware service ?
Thank you.

HI,
Smartnet Service Contract:
Reduce downtime with fast, expert technical support, flexible hardware coverage, and smart, proactive device diagnostics with SMARTnet Service. Your IT staff has anytime access to Cisco engineers in the Technical Assistance Center (TAC) and an extensive range of resources, tools and training.
What You Get by having this contract :
Global 24-hour access to experts in the Cisco Technical Assistance Center (TAC)
Self-help support through online communities, resources, and tools
Hardware replacement options, including 2-hour, 4-hour and next business day
software updates and download from cisco website fro your controller.
Hope you got the point :)
Regards
Dont forget to rate helpful posts

Attachment in the Services for the object (Transaction PA30)

Dear Friends
i have uploaded a file (from my desktop)using Services for the object in PA30 transaction for a particular personnel no. . The services for the object is just above the Create Icon in PA30 Transaction.
Now i would like to know where this file is being saved which was upload from my desktop . Later if i remove the file from my desktop even then i can see that file
still being there in the attachment when i click the Services for the object.
Please could any one let me know.
Regards
syamala

Hi,
Have a look at this thread.
attachment in PA30
Regards,
Manoj.

Will there be support in CS4 for the JVC GY-HM700 files?

will there be support in CS4 for the JVC GY-HM700 files? Of course without rendering neccessary?

I own a HM100, which uses the same EX1 codec. The difference is the HM100 allows you to choose between a MOV and MP4 wrapper. The MP4 wrapper works great in Premiere CS3 and CS4.(just like the EX1)
The HM700 in stock configuration, only saves in the MOV wrapper, which does not work with CS4. You have to buy the Available with optional SxS Media Recorder to have the HM700 save in .MP4.
Now there is a codec you can buy - it is not free- that allows you to view the MOV files. I am not sure that will make it work with CS4.

Lightroom 3 does NOT support raw files for the Canon Sureshot S95

Have just bought the new Canon Sureshot S95
after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
Canon Sureshot S95.
Come on Adobe.....please provide an update asap.

(1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW. Hardly a satisfactory solution.
(I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ).
(2) SUGGESTION- even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting). I am sure users with that preference would still prefer a JPEG than no picture at all!
Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs. So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
JJ
* (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

I just upgraded my data plan from 6GB to 10GB for the same rate of $80 is this a promotion? If yes, when does the promotion end? Thank you.

I just upgraded my data plan from 6GB to 10GB for the same rate of $80 per month. Is this a promotion? If yes, when does the promotion end?

In most cases you keep the same plan and promotions even when you upgrade the phone. There are exceptions for very old plans and unlimited data, but essentially mrhelper is correct. You have option to "keep current plan" when upgrading. so in most cases, your statement that you will go back to $100 for 10 GB when upgrading is incorrect. What was your particular circumstance?

When is Photoshop going to support RAW files for the new Nikon D750?

When is Photoshop going to support RAW files for the new Nikon D750?

You can always monitor the forum for announcements. My experience has been that I have been automatically notified when the official updates are available. I'm using Photoshop CS6, and the application manager associated with that program always notifies me when there is an update available. You can go ahead and install the release candidate now, and still install the official release when it comes.

Dialling plan that supports star services for the UK

Similar Messages

Maybe you are looking for