Attachment in the Services for the object (Transaction PA30)

Dear Friends
i have uploaded a file (from my desktop)using Services for the object in PA30 transaction for a particular personnel no. . The services for the object is just above the Create Icon in PA30 Transaction.
Now i would like to know where this file is being saved which was upload from my desktop . Later if i remove the file from my desktop even then i can see that file
still being there in the attachment when i click the Services for the object.
Please could any one let me know.
Regards
syamala

Hi,
Have a look at this thread.
attachment in PA30
Regards,
Manoj.

Similar Messages

How to disable the Services for Object in IW32?

Hi Experts,
May i know how to deactivate the create and delete attachment option if the status of the order in IW32 is already TECO? Please help

I have found my own answer. If your user type is setup as 'Service', you will not be have the "Services for Object" icon on IQS23. If you need the icon to perform the that service, you must change the user type to Dialog from Logon Data.

Attachment list in Services for Object toolbar

Does anybody know if there is any user exit or BADI that I can use to filter certain file attachments in Attachment list of Services for Object toolbar.
For example, in transaction XK03 (Vendor display), Services for Object toolbar, you can see the Attachment list and it will display list of pc file attachments, however, we have a requirement to display only those that met certain criteria, is there any BADI or user exit for this?
Thanks in advance for your help.

you can use BADI
GOS_SRV_SELECT
for this.
Regards
Raja

How to delete the index for the business object BUS0033

Hi to all experts,
I'm applying note 1349496 the error here is no records with F4 help for the funds center .
solution from the note
Implement the attached program corrections. Then, in the transaction, delete the index for the business object BUS0033, reactivate it, and start the indexing in the indexing mode "Full". The system then displays the data correctly in the F4 search help.
how to do the second part i have already applied the note .

any help

Function modules (and the like) for testing Object Dependencies in PLM

Hi all,
I've created an upload program for characteristic values to AUSP, but I need to check the object dependencies (as shown in transaction CU03) before saving the data.
I have the list of the dependencies for the characteristic in question, but how can I perform a dependency check in program code? Is there any function modules (and the like) which I can use?
All helpful answers will be rewarded!
- Mari Virik

Thanks!
I'm not that familiar with BAPIs, which transactions can I use to check it out? Transaction BAPI? And how do I locate it in the BAPI Explorer? How do I perform the method call?
More points will be rewarded
- Mari

Function modules (and the like) for testing Object Dependencies

Hi all,
I've created an upload program for characteristic values to AUSP, but I need to check the object dependencies (as shown in transaction CU03) before saving the data.
I have the list of the dependencies for the characteristic in question, but how can I perform a dependency check in program code? Is there any function modules (and the like) which I can use?
All helpful answers will be rewarded!
- Mari Virik

Hi,
How did you solve this problem?
I have the same.
Thanks.

When we try to receipt the services for a PO

Hi,
When user try to receipt the services for a PO, error "044 Account determination for an entry not possible" appears cannot complete the process..
Can you please help me wht could be the error
Thanks in Advance
Lucky

Hi,
1st check valuation class of service master in t.code: AC03, it valuation class foe service should be 3200.
Check service PO and see the cost object and G/L account assigned.
Also check in t.code: OKB9 and see cost object you used in service PO & all seetings details.
Are you getting error during creation of service entry sheet or releasing of service entry sheet !
Generally when releasing of service entry sheet all used to get error" RC M8 147 Account determination for entry ****not possible" and to avoid error the G/L account for GR/IR assigned to WRX key in OBYC t.code chart of account WITHOUT VALUATION CLASS.
Also check notes: 64204 & 705460
For more check link:
How to make GL account field in SES to be made in display only
Regards,
Biju K

Conflict between 2 business services for the same SAP R/3 instance

Hi,
We developed a packaged solution that connects to SAP R/3 with RFC Adaptor and idoc Adaptor.
We deliver design and configuration packages defining the entire integration schema between an external system and SAP.
The configuration defines a business service BS_SAP_R3 containing RFC and idoc communications channels.
When we deploy and configure the solution (design and config) on a XI instance we have a conflict.
As the XI already contains a Business Service connecting to the same SAP instance (other integration) we want to use with our business service BS_SAP_R3, we have an error when configuring the Adapter-Specific Identifiers properties R/3 System ID and Client from the section IDoc Adapter and RFC Adapter with the message, for the BS_SAP_R3
Check Result for Object BS_SAP_R3
SAP system ID D46 and client 800 already exist in service | BC_TEST_SAP_R3 
Is there a way to solve this conflict problem?
Thanks for your help.
Adalbert

Dzieki za odpowiedz
Could you give more details about the design issue and what you have on mind?
I also suspect a design issue but do not know how to solve it...
If in your Configuration you have 150 Receivers Determinations, Interface Determinations and Receiver Agreements referencing the same BS business service to access SAP, can you make the service configurable in any sort
Can you recommend another solution?
The only solution I see it to regenerate all the configuration by hand using the already exiting SAP BS But for 150 objects it is not a real solution...
Thanks for your help
Adalbert
Wojtek

What's with the new edition of Pages using Maverick? Google rejects the files with the following message attached "The reason for the problem: 5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked as its content security threat?

I recently upgraded both Pages 09 (I believe) and went to OSX 10.9 Maverick .... now I am unable to send a pages document to a friend on gmail. Google rejects the message and attachment with the following explanation -
The reason for the problem:
5.3.0 - Other mail system problem 552-'5.7.0 This message was blocked because its content presents a potential\n5.7.0 security issue.

Same Problem here
IWORKS 09 pages, keynote, numbers does not send in MAIL (mac) because of "This message was blocked because its content presents a potentialsecurity issue"
its a problem not only on GMAIL but also Live, Hotmail, Yahoo, and other services...
The problem is that gmail and others haved yet accepted the latest iworks 09 files. its a problem that apple can ask then to fix but its up to the gmail and others to fix it.
Solution!!!:
1 - Send it by exporting to office files
2 - Saving the files as old iwork documents
3 - Command P and save as PDF
4 - Save in icloud and send the URL
So you can still send them but have to take a bit more of your time
i hope you understand my english is not optimal
And if you have any questions feel free to ask me

What is the use for lock object and how to use the lock objects

Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .

hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

How to get the values for the Authorization Object Fields....

Hi Everyone,
I'm pretty new to the SAP Security and have been working on the Basis sides...I created a new role in PFCG and added a few transactions (ME13) and clicked on the Authorizations tab. In there, the authorization tree is in yellow and red. After providing the Org Values, only the yellow lights remain (apart from the green one ofcourse). Now how do we get the values for the different auth obj fields that are in yellow... say for example
Conditions                                                   COND
Maintain Condition: Auth. for Use/Appl./Cond.Type/Table      V_KOND_VEA
Activity                       03                                                                        ACTVT
Application                                                                                KAPPL
Condition table                                                                                KOTABNR
Condition Type                                                                                KSCHL
Usage of the condition table                                                                 KVEWE
Here the values for V_KOND_VEA fields e.g. KAPPL, KOTABNR etc are missing.
My question is how do we get these values in regard to the requirement provided by the client...is it the functional guys who provide these values or else how is a security person supposed to know it...
All the help in this regard is sincerely appreciated along with the awarding of points...

Hey thanks Alex and Catastrophe for the quick response...
I'll be sitting with the functional team and reviewing the roles created.
Thanks for all the help once more
Regards,
Akash.

Error encountered while polling the resource for the service endpoint

Hello everyone
I'm a newbie on OSB world. Yesterday, I've tried to test OSB with FTP transport and got some problems.
As you see in the title, I've search this forum to get a solution already, but I couldn't find anything. So that I create a new thread.
I created a new OSB project, create a new Proxy service to connect to my FTP server:
- service type: messaging service
- request message type: Text, response message type: None
- FTP transport: external user (I used a Service account), Post read action: archive, transfer mode: ascii, some directories needed were created in /tmp directory
- Message flow: Start node -> pipeline pairs
in request pipeline of pipeline pairs node: i created a new stage: Assign action -> Log (to get file contents, error severity) -> Assign -> Log (get file name)
The expected results are: file file content and file name (display in osb console) after I submit a text file to ftp server (using test console or ftp client)
But, some error occur continuously after I submit a text file (I can get the file content because error raise and log catch it). The error message is show below:
<Jun 6, 2011 10:04:59 AM EDT> <Error> <ALSB Logging> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, show_text_info, REQUEST] file contents: li
ag
a
glakjgk
>
<Jun 6, 2011 10:05:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: *javax.naming.NameNotFoundException:* While trying to lookup *'wlsb.internal.transport.task.queue.ftp'* *didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
*javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
 at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
 at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
 at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
 at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
 at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
 Truncated. see log file for complete stacktrace
>
<Jun 6, 2011 10:06:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
 at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
 at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
 at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
 at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
 at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
 Truncated. see log file for complete stacktrace
>
...There are many BEA-381602 errors that occur continuously.
My question is how to solve this problem.
Any suggestion is appreciated.
Thank in advance.
Regards, CuongPT
Edited by: Doubt_Man on Jun 6, 2011 11:17 AM

Thank atheek1, I remember that I didnt do any manual configuration on my domain :). I use that domain for testing so that I will create a new domain for comparison.

Where can we get the list of predefined services for the notification of events/signals

We have a sample plugin docwatch which uses the responder to notify in case a new doc is created/saved/doc closed etc.
I want to know if I can get the similar set of services for the text frame
eg: Typing a text should generate the notification
Deleting a text shoud generate a notification( in the form of alert window or something)
Also, for pages,frames etc.
Where can we check the list of default services available for these or can we do it some how in code?

Hi Eton,
To check the instances which have ran today, you can use the below query in query builder.
SELECT SI_NAME,SI_ID FROM CI_INFOOBJECTS WHERE SI_INSTANCE=1 AND SI_STARTTIME > '2014.08.20 00:00:00' Order by SI_STARTTIME DESC
To check the instances which would be running in the future, that means you have recurring schedules. Check for the SI_NEXTRUNTIME to get the details of instances which will run in the future as per the recurrences.
Thanks,
Prithvi

Enter the price for the service item

Dear Experts,
We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
Thanks in advance.
Thanks
Umakanth

Hello,
I assume you are using a Product category configured for Extended Classic scenario.
In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
If you get the same error, please raise a OSS message for SAP.
Thanks,
Sushil

Attachment in the Services for the object (Transaction PA30)

Similar Messages

Maybe you are looking for