Did anyone tried Rejection Message Handler via Queue based method?

Dear All,
I am presently doing a Rejected Message Handler process and successfully implemented with File based and Web Service based. But I am not getting the clue for Queue based. We can enqueue the rejected message into queue as a JMS message via this method. But the URI format they have given is *"jdbc:oracle:thin:@<host>:<port>:<sid>#<un>/<pw>#queue"*. Format includes jdbc connection string along with queue name. For this I have created JMS module with JDBC Persistent store and created queue in it. But still I am not able to enqueue the message inside the queue. Also, is there anyway to see the queue names inside the DB. Did anyone tried this method? Could you please share the info??

WL JMS Queue consume>BPEL1 (One way) invoke>Mediator service (one way) route> BPLE2 (one way). Also I have added transaction properties in BPEL1 and 2 + References + Services.
Now, if there is a fault in BPEL2 the transaction should be rolled back in BPEL1 and the message should be seen in the WL queue itself. But that is not happening in my case. Everything is getting rolled back upto a point just after the >recieve activity in BPEL1 except the message is not getting rolled back to queue.There will be 2 transactions in this scenario : 1) jms queue to soa hydration store 2) soa-hydration to bpel execution.
This is the behaviour for 1 way or async interfaces , jms adapter thread completes its transaction work after persisitng to dehydration store and another bpel system thread starts work executing the bpel code after retrieving the message off the db in a separate transaction. So the rollback you are seeing is only applicable for 2nd transaction which roll backs to the dehydration store instead of the queue.
For synchronous interfaces, the same adapter thread will be involved for complete message processing including bpel code execution. So I think if you want to get the jms queue within the same transaction you can try set up the interfaces to be sync, even with dummy responses. This might make jms adapter thread to start a transaction --> read message off queue within the same transaction --> execute bpel code within same transaction --> complete/rollback transaction based on bpel code execution.

Similar Messages

MQ Adapter does not clear the rejected message from the queue

Hi All,
I'm using a MQ Adapter to fetch the message from the queue without any Backout queue configured. However, whenever there is any bad structured message found in the queue, MQ adapter rejects the message and moves the message to the rejmsg folder but does not clear it off the queue, as a result of which it keeps retrying the same hence, filling the logs and the physical memory. Somehow we do not have any backout queue configured so I can move the message to blackout queue. I have tried configuring the jca retry properties and global jca retry as well but to no avail.
- Is it not the default behaviour of MQ Adapter to remove the rejected message from the queue irrespective of Backout queue is configured or not? The same behaviour working well with the JMS and File Adapter though.
- Is there any way I can make MQ Adapter delete the message from that queue once it is rejected?
Regards,
Neeraj Sehgal

Hi Jayson,
Check this URL which answers a problem with com.sap.engine.boot.loader.ResourceMultiParentClassLoader problem:
http://209.85.175.132/search?q=cache:RnFZ9viwuKkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.sdn.folder.sdn!2fcom.sap.sdn.folder.application!2fcom.sap.sdn.folder.roles!2fcom.sap.sdn.folder.navigationroles!2fcom.sap.sdn.role.anonymous!2fcom.sap.sdn.tln.workset.forums!2fforumtest!2fcom.sap.sdn.app.iview.forumthread%3FQuickLink%3Dthread%26tstart%3D45%26threadID%3D1020700+com.sap.engine.boot.loader.ResourceMultiParentClassLoader&hl=en&ct=clnk&cd=3&gl=in&client=firefox-a
Please check that the JDK compliance level is at 5.0
Window->Preferences->Java->Compiler->Compiler compliance level set this to 5.0
Set the installed JRE to the one you have mentioned JDK 5.0 update 16
Window->Preferences->Java->Installed JRE's->
Click on the add button to select the path of your JDK.
once completed click on the check box next to it.
regards,
AKD

File Rejected Message Handler in ESB

Hi All
I have installed Oracle SOA Suite 10.1.3.1 + 10.1.3.4 patch-set + MLR#5 on 3 servers:
1) Unix server A
2) Unix server B
3) Windows XP server
I have developed an ESB which is polling a file from an FTP in a particular XML Schema.
I have also set "rejectedMessageHandlers" in ESB FTP adapter's .esbsvc file.
So its set to rejectedMessageHandlers=/server/dhami/files/rejected on UNIX server A and B AND
rejectedMessageHandlers=file://C:/oracle/Files/error/esbHandler in Windows XP server.
Now when i provide a wrong XML file as input, say myXMLInput.xml it is rejected.
Issue is that in Unix Server A and Windows XP server, rejected file name comes as myXMLInput.xml,,
but on Unix Server B it comes as INVALID_MSG_********20090607_090132_0806.dat
Can anybody know the reason of that difference in behaviour? All the 3 environments are at same level.
Please Help.
Thanks
-- Inder

Hey guys, issue was that UNIX Server B was on MLR#5 patch level but dont know how it was rolled back to MLR#1.
So the issue resolution is that UNIX Server B too should be upgraded to MLR#5.
Then the rejected message files will come in as myXMLInput.xml and not as INVALID_MSG_********20090607_090132_0806.dat
Thx

Rejected Message Handler

Hi All,
I have a file adapter which picks up the message from the File location.
I have configured the rejectedmessage handler in the bpel.xml,and given a folder path to write the rejected files.
But when a file gets rejected it is being written only to the default directory and not to the directory i have configured.
Below is the property i have set.
<property name="rejectedMessageHandlers">file://D:/rejected/Write</property>
Please help in this regard.
Regards
Ashwini

When the process fails do you see in the log it finding the rejectedMessageHandlers. You should see something that as looking for rejection handler, success or failure. If you don't see anything then the rejection handler hasn't been registered.
Also if it is a fault, e.g. disastrous, unrecoverable situation (no more memory, file handles, disk space or something similar) and not a rejection, then it will write to the default location, unless you handle this as well.
Also can you post the full activation agent entry for bpel.xml just want to double check the entry.
cheers
James

UCCX 7.x - has anyone routed voicemail messages to a queue

My customer was given a demo by Cisco the other day where the shown him that messages can be routed to a csq. Of course, I can not find such a feature available in Cisco documentation. Is this in Unity? If so, how? If this the case wouldn't this option be available in the previous UCCX versions?

It is not an inherent feature but is possible with a fair amount of scripting. Attendees of the UCCXA class are given an example script that does this; however, you should be well versed in UCCX before attempting this particular trick in production. The example code included in the UCCXA class (and unfortunately used by some Cisco partners) is not overly robust or resilient. It is somewhat easy (IMHO) for messages to be lost using that code.
At a high level what happens is the CCX server records a message, hangs up with the original caller, and then calls itself to sit in queue waiting for an agent. When the agent answers it plays the message back to them and may also automatically call the customer back. This consumes system resources, IVR ports, and affects reporting statistics. It can go badly if you don't do it correctly.
The UCCX 5.0 "script repository" might include an example of this: http://tools.cisco.com/search/display?url=http%3A%2F%2Fwww.cisco.com%2Fen%2FUS%2Fdocs%2Fvoice_ip_comm%2Fcust_contact%2Fcontact_center%2Fcrs%2Fexpress_5_0%2Fdesign%2Fguide%2Fscript_repository.zip&pos=1&strqueryid=1&websessionid=oF4lJjsd9A648MkSsJKC2Ue

TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
It tried to send as an SMS but gave the 'green button reject message'.(no money)
Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
Any ideas?
Many Thanks!

Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
What a mess!

Advantages of Using Queued Message Handler vs. Standard State Machine

Hello,
What are the advantages of using a Queued Message Handler? Also, why are they more powerful than using Standard State Machines?
Thanks!

They are really just sort of an extension of a state machine. The general idea is that you have one loop doing a specific job. You then use a queue to tell it how/when to do this job. For instance, I might have a log file loop. I will send it commands to open a file, write some data, write some more data, and finally close the file. Each of those commands are coming from the queue. The beauty with this setup is that anybody that can get a reference to that queue can send the command to that loop.
So the QMH is "better" than a state machine mostly because of the decoupling of functions. In a given application, I will have a loop for log file writing, GUI updates, reading of a DAQ, instrumenet communications, server communications, etc. Trying to do all of that in a single loop state machine is a major pain in the rear end. Seperating them out makes life so much easier.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Message stuck in queue - Rejected by server

Okay, so I thought was being smart by trying to set up my companies email on my own. When I entered all of the information (which I made mistakes) I tried to send a test message. Of course it would not go through and was being rejected by my companies server. So I deleted the email account I created on iphone. However, the test email I sent remained in queue and kept trying to resend over and over getting the same error/rejection message from companies email. Since there is no sent box (on .MAC anyway)there was no way to erase the test message stuck in queue.
Solution: Since I currently have two email accounts .MAC and Yahoo, I just tured off the .MAC and all of a sudden I hear the SHOOOWWWSHHHH. The test message stuck in queue was sent from the yahoo account. (after I confirmed the message was sent, I turned on hte .MAC email account again)
Now I know this solution is purely dumb luck and playing around with settings, but just incase it happens to you, this was how I solved it.

Hey, thanks for that! It is very intersting to see how that works. Looks like the outgoing mail queue can change "on demand", like when you left only one account active. This means that the ability to send emails from any of the accounts regardless of where it came in is just a programming step away...

Queued Message Handler Project Template

Hello,
Currently prepping for CLD exam.
I was told we could use LV 2012 Professional Version. Is it OK during exam to use Project template for Queued Message Handler to generate VIs and block diagram code? Or must a QMH be generated from scratch?
I assume there will be a main VI which we must modify, but the thought was to reuse the generated template code into this VI.
Thank you,

You can use templates, examples etc that ships with LabVIEW. I am sure I read this somewhere, will post a link if I find it.
Here is one tip offered by one of the experts: http://forums.ni.com/t5/Certification/Car-Wash-REVIEW/m-p/2267688#M540
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error while trying to pick message from weblogic queue

Hi,
We are getting the following error while trying to connect to pick up a message from weblogic queue.
We are suing oracle soa suite 10.1.3.1 and weblogic 8.1
the bad part is that, this error is not documented anywhere and couldn't get much help on this.
Would appreciate any suggestions / pointers on this.
Let me know if any further information is required.
invoke failed
org.collaxa.thirdparty.apache.wsif.WSIFException: file:/E:/product/10.1.3.1/OracleAS_4/bpel/domains/default/tmp/.bpel_OTOCBPELProcess_1.0_78fcf080ec2bd7495aebfb5373e76116.tmp/readmsg.wsdl [ Consume_Message_ptt::Consume_Message(opaque) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
---------------------------------------------------

Hi!
I am facing a similar issue, does someone have an idea ?
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="detail"><detail>null</detail>
</part><part name="summary"><summary>file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_TestReceiveMessage_BPEL_1.0_e00fd88d454889b871183d0d92dc9f7d.tmp/plReceiveMessage.wsdl [ Consume_Message_ptt::Consume_Message(TestPushMessage_BPELProcessRequest) ] - WSIF JCA Execute of operation 'Consume_Message' failed due to: ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
; nested exception is:
ORABPEL-12115
ERRJMS_IX_WRONG_SPEC.
Outbound interaction invoked with incorrect InteractionSpec.
Please examine the log file to determine the problem.
</summary>
</part></remoteFault>
Thanks,
romain.

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

It's been 4 days and i still haven't received my free update via e-mail...did anyone have the same problem??

I just recently bought a macbook pro and there's a free os update via email and i still haven't received my app code via e-mail and it's been 4 days i'm from phil. did anyone also have the same problem?

I just got my Puma update code for my Cube, so I guess there's a bit of a backlog!

Error message mes when trying to send PO via IDOCS to another system?

Hi Abap expert,
I am getting wired message what I ma trying to send PO via IDocs to other SAP system.
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby

Hi,
Go and check it in NACE tcode, whether , Condition type, output types are maintained or not? if not maintained, Maintain it for 6 -PO for EDI.
Hope this is the error you are getting.
Thanks
Manju

I've got a new MacBookair11 2weeks ago and I am very happy with it. Today I've tried to synchronize it via icloud with my ipad and I have lost the camera. Looking through help in internet I found out that I had to reset the SMC. I did exactly as per instr

I’ve got a new MacBookair11 2weeks ago and I am very happy with it. Today I’ve tried to synchronize it via icloud with my ipad and I have lost the camera.
Looking through help in internet I found out that I had to reset the SMC. I did exactly as per instructions given but with no luck.
Is there any other solutions that will fix my camera for facetime and iphoto?
Thanks for your help

MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update:
"Apple is investigating this issue."

Did anyone tried Rejection Message Handler via Queue based method?

Similar Messages

Maybe you are looking for