Rejected Message Handler

Hi All,
I have a file adapter which picks up the message from the File location.
I have configured the rejectedmessage handler in the bpel.xml,and given a folder path to write the rejected files.
But when a file gets rejected it is being written only to the default directory and not to the directory i have configured.
Below is the property i have set.
<property name="rejectedMessageHandlers">file://D:/rejected/Write</property>
Please help in this regard.
Regards
Ashwini

When the process fails do you see in the log it finding the rejectedMessageHandlers. You should see something that as looking for rejection handler, success or failure. If you don't see anything then the rejection handler hasn't been registered.
Also if it is a fault, e.g. disastrous, unrecoverable situation (no more memory, file handles, disk space or something similar) and not a rejection, then it will write to the default location, unless you handle this as well.
Also can you post the full activation agent entry for bpel.xml just want to double check the entry.
cheers
James

Similar Messages

  • Did anyone tried Rejection Message Handler via Queue based method?

    Dear All,
    I am presently doing a Rejected Message Handler process and successfully implemented with File based and Web Service based. But I am not getting the clue for Queue based. We can enqueue the rejected message into queue as a JMS message via this method. But the URI format they have given is *"jdbc:oracle:thin:@<host>:<port>:<sid>#<un>/<pw>#queue"*. Format includes jdbc connection string along with queue name. For this I have created JMS module with JDBC Persistent store and created queue in it. But still I am not able to enqueue the message inside the queue. Also, is there anyway to see the queue names inside the DB. Did anyone tried this method? Could you please share the info??

    WL JMS Queue consume>BPEL1 (One way) invoke>Mediator service (one way) route> BPLE2 (one way). Also I have added transaction properties in BPEL1 and 2 + References + Services.
    Now, if there is a fault in BPEL2 the transaction should be rolled back in BPEL1 and the message should be seen in the WL queue itself. But that is not happening in my case. Everything is getting rolled back upto a point just after the >recieve activity in BPEL1 except the message is not getting rolled back to queue.There will be 2 transactions in this scenario : 1) jms queue to soa hydration store 2) soa-hydration to bpel execution.
    This is the behaviour for 1 way or async interfaces , jms adapter thread completes its transaction work after persisitng to dehydration store and another bpel system thread starts work executing the bpel code after retrieving the message off the db in a separate transaction. So the rollback you are seeing is only applicable for 2nd transaction which roll backs to the dehydration store instead of the queue.
    For synchronous interfaces, the same adapter thread will be involved for complete message processing including bpel code execution. So I think if you want to get the jms queue within the same transaction you can try set up the interfaces to be sync, even with dummy responses. This might make jms adapter thread to start a transaction --> read message off queue within the same transaction --> execute bpel code within same transaction --> complete/rollback transaction based on bpel code execution.

  • File Rejected Message Handler in ESB

    Hi All
    I have installed Oracle SOA Suite 10.1.3.1 + 10.1.3.4 patch-set + MLR#5 on 3 servers:
    1) Unix server A
    2) Unix server B
    3) Windows XP server
    I have developed an ESB which is polling a file from an FTP in a particular XML Schema.
    I have also set "rejectedMessageHandlers" in ESB FTP adapter's .esbsvc file.
    So its set to rejectedMessageHandlers=/server/dhami/files/rejected on UNIX server A and B AND
    rejectedMessageHandlers=file://C:/oracle/Files/error/esbHandler in Windows XP server.
    Now when i provide a wrong XML file as input, say myXMLInput.xml it is rejected.
    Issue is that in Unix Server A and Windows XP server, rejected file name comes as myXMLInput.xml,,
    but on Unix Server B it comes as INVALID_MSG_********20090607_090132_0806.dat
    Can anybody know the reason of that difference in behaviour? All the 3 environments are at same level.
    Please Help.
    Thanks
    -- Inder

    Hey guys, issue was that UNIX Server B was on MLR#5 patch level but dont know how it was rolled back to MLR#1.
    So the issue resolution is that UNIX Server B too should be upgraded to MLR#5.
    Then the rejected message files will come in as myXMLInput.xml and not as INVALID_MSG_********20090607_090132_0806.dat
    Thx

  • How to handle rejected messages in file adapter

    Hi....! every one.........
    in file adapter read operation it will pick the files even the file contains unstructure message but that file wont be processed.
    where the rejected message goes.
    i have requirement like that rejected message i have to store in another file
    please provide me answer..........

    Hi,
    You can add the parameter 'PhysicalErrorArchiveDirectory' in the JCA file (of the File Adapter).
    Put there the required directory where you want the rejected file to be sent.
    You can add this property in 2 ways:
    1. In your JDeveloper open the JCA file and add: <property name="PhysicalErrorArchiveDirectory" value="/../.."/>
    2. In EM, right click the composite->Service/Reference Properties->Choose your file->On the Properties tab press Add-> Choose 'PhysicalErrorArchiveDirectory' and put the directory-> press Apply.
    Arik

  • Fault name for Rejection Messages in Fault policy.

    Hi ,
    I am trying to do my fault handling for Rejected messages .I am bit confused what is the fault name i should specify for rejection messages .
    Say for BPEL , We have bpelx:binding fault etc for BPEL ..
    <faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:[?????????????] ">
    <condition>
    <action ref="writeToFile"/>
    </condition>
    </faultName>
    </Conditions>
    Regards ,
    Naga

    It should be the "service name" for the inbound adapter in the composite. Here is the doc link which explains this: http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/life_cycle.htm#TKADP187.
    regards,
    Sandeep

  • Rejected Message in BPEL

    Hi
    Normally, when any file is rejected in BPEL, the file is sent to rejected message folder in JCA. Is there any size limit to this JCA folder?
    I am working on a process, till yesterday the messages were getting rejected correctlyand were going to this folder. But I am not able to somehow get this going today.
    Can anyone suggest anything?
    Regards,
    Ketan

    Hi,
    I got the following answer from Metalink / BPEL Software Enginneering:
    "+The issue is not related with the JMSRedelivered flag. Actually that is the out of box behavior of the adapter in 10.1.3.4 and beyond. When a PCResourceException is encountered that will in turn result in the rollback of global transaction. Adapter will make a note of the message id in this case. Because of the rollback the dequeue will not get committed and message gets rolled back to the source queue. On the subsequent dequeue of the same message adapter will in turn reject the message and the message is handled by the rejection handler. So what you are seeing is the correct behavior of the adapter.+"
    So this behavior that I'm experiencing is NOT related to JMSRedelivered header but to the message id,
    and this is working as designed - unfortunately.
    Regards
    Christian

  • Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

    Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%). 
    The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
    configured threshold.” 
    There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20). 
    From what I can tell, all of the IP addresses are from Taiwan. 
    The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014). 
    From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening. 
    The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
    Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
    The Error reads:
    The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
    mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
    Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
    Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
    I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
    Recent changes to the system:
    About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
    Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
    Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

    Hi,
    Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Error message handling in BAPI...

    Hi Guys,
    I am working on documentation of a BAPI used SAP insurance module. Now I want to see all the error messages associated/ handled in that BAPI. How can I do that ? Is there a table in data dictionary where I can see error messages handled by a given Function module/ BAPI?
    Any inputs will be highly appreciated.
    Thanks.
    Regards,
    Tushar.

    Hi,
    here´s one possible solution:
      CALL FUNCTION 'MESSAGES_INITIALIZE'.
      LOOP AT it_return_bapi.
        CALL FUNCTION 'MESSAGE_STORE'
             EXPORTING
                  arbgb          = it_return_bapi-id
                  exception_if_not_active = ' '
                  msgty                = it_return_bapi-type
                  msgv1          = it_return_bapi-message_v1
                  msgv2          = it_return_bapi-message_v2
                  msgv3          = it_return_bapi-message_v3
                  msgv4          = it_return_bapi-message_v4
                  txtnr          = it_return_bapi-number
                  zeile          = ' '
             EXCEPTIONS
                  message_type_not_valid  = 1
                  not_active              = 2
                  OTHERS                  = 3.
      ENDLOOP.
      CALL FUNCTION 'MESSAGES_STOP'
           EXCEPTIONS
                a_message = 04
                e_message = 03
                i_message = 02
                w_message = 01.
      IF NOT sy-subrc IS INITIAL.
        CALL FUNCTION 'MESSAGES_SHOW'
             EXPORTING
                  i_use_grid         = 'X'
                  i_amodal_window    = i_amodal_window
             EXCEPTIONS
                  inconsistent_range = 1
                  no_messages        = 2
                  OTHERS             = 3.
      ENDIF.
    ENDFUNCTION.
    Best regards

  • Receiver File adapter - 'Empty Message Handling' option to ignore not worki

    Hi,
      I am trying to create the Files in receiver based on condition.But I am gettiung error in communication channel when there is no payload. Receiver I am usuing FCC and processing tab I selected -'Empty Message Handling' option to ignore .
    one source -> Target 1 (0..1 occurance in signature tab changed, message mapping and operation mapping)
                 and Target 2 (0..1 occurance in signature tab changed)
    and I put the message type level condition. While creating first message If did not create the Message type in my maaping still my Receiver File communication channel is giving error. even thow I my receiver interface occurance is 0..1
    Right now I am in PI7.1 and SP7 is the bug for support pack do I am missing any thing. and do I need to upgrade any nwe patch. appreciate your help.
    Regards,
    Venu.

    Hi,
    here is the my requirment one source -> two target interfacess (0..1)
    If u have 2 target interfaces,then this is not suffice..... u should make it as 0..unbounded both in operation mapping and message mapping.
    But based on ur requirements posted above i guess u have only one inbound interface at a time based on some conditions....
    But,
    <messages>
    <messages1>
    based on condition first message type not created in mapping.
    <messgaes2>
    The error u r getting is because.... u want only one interface in target at a time....
    Then u should not generate Message1 also in the target.
    So avoid mapping to message1 if u want only message2.
    If both message1 and message2 are created in target means... it is triggering for two interfaces.... so avoid one message1 or message2... based on some conditions u have..
    Still nt solved do post...
    Babu

  • Receiver file adapter creates empty files, Empty-Message Handling SP19

    Hello,
    We have just upgraded the system to SP19.
    One of the new features is that it should be possible to determine how XI messages with an empty main payload are to be handled in the receiver file adapter.
    If the parameter Empty-Message Handling is set to 'Ignore' no file should be created if the main payload is empty. In our case an empty file (size 0 kb) is still created even though the main payload is empty and the flag is set to 'Ignore'.
    Has anybody experienced the same problem?
    //  Best regards  Hans

    This should work:
    Use your own adapter module that parses incoming message and checks if it has any record sets in the document. If it does not have any record sets, then set the message to empty and then give this modified message to File receiver.
    For example, see the example code below:
    Module imports..
    Audit log import..
    DOM imports/SAX imports..
    public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException {
              try {
                   // get the XI message from the environment
                   Message msg = (Message) inputModuleData.getPrincipalData();
                   AuditMessageKey amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
                   Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"RemoveRootTag: Module called");
                   XMLPayload payLoad = msg.getDocument();
                   Document doc = parseXmlFile(payLoad.getInputStream());
                   if(doc != null){
                        if(!doc.getDocumentElement().hasChildNodes()){
                             Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS, "Document is empty!!");
                             payLoad.setContent("".getBytes());
                             msg.setDocument(payLoad);
                   // provide the XI message for returning
                   inputModuleData.setPrincipalData(msg);
                   } catch (Exception e) {
                   // raise exception, when an error occurred
                   ModuleException me = new ModuleException(e);
                   throw me;
                   // return XI message
              return inputModuleData;
         private Document parseXmlFile(InputStream xmlpayload) {
              try {
                   DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                   factory.setValidating(false);
                   //        Create the builder and parse the file
                   Document doc = factory.newDocumentBuilder().parse(xmlpayload);
                   return doc;
              } catch (SAXException e) {
              } catch (ParserConfigurationException e) {
              } catch(IOException e){
              return null;

  • MESSAGE HANDLER OF CLASS  if_hrpa_message_handler IS NOT WORKING

    WE HAVE WRITTEN THIS CODE AS BELOWS INSIDE BL BADI....THE ERROR MESSAGE IS GETTTING POPULATED IN THE MESSAGE_LIST BUT DOESN'T GET DISPLAYED WHILE CHECKING AND SENDING THE FORM FROM THE FRONT END.
    THE BELOW CODE IS JUST A SAMPLE CODE IN OUT BADI METHOD THERE ARE SEVERAL VALIDATIONS ON THE FAILURE OF EACH OF THEM A ERROR MESSAGE SHOULD GET TRIGERRED FROM THE FRONT END.MESSAGE_HANDLER IS ALREADY AVAILABLE INSIDE INITIAL COMPUTATIONS SO THERE IS NO REASON TO CREATE OBJECT BADI MESSAGE HANDLER
    [[ IF sy-uname = 'PGOSH' OR SY-UNAME EQ 'CGHOSH'.
       DATA badi_message_handler   TYPE REF TO cl_hrpa_message_list.
         DATA message_handler        TYPE REF TO if_hrpa_message_handler.
         DATA is_ok   TYPE boole_d.
        CREATE OBJECT badi_message_handler.
          message_handler = badi_message_handler.
            message-msgid = 'ZHPA'.
            message-msgty = 'E'.
           message-msgno = '010'.
           message-msgv1 = c_none_plans. "'Invalid Plan'(z09).
             CALL METHOD message_handler->add_message
                EXPORTING
                  message = message
                  cause   = space . "message_handler->ERROR . "infotype_specific . "unknown.
                  is_ok = 'X' ."space.
             badi_message_handler->add_messages( message_handler ).
             RAISE error_with_message.
      ENDIF.]]
    PLS PROVIDE YOUR INPUTS REGATRDING THE REASION WHY THE CODE IS NOT GETTING TRIGERRED.
    Edited by: PRIYANKUSH GHOSH on Jun 18, 2010 4:01 PM

    Moderator message - Welcome to SCN.
    Please do not use all caos in your posts. It makes it hard to read..
    Also, Please read Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
    Rob

  • Message handling with multiple lines to display

    We have a requirement to issue an error message during dialog processing (PAI) and I'd like to use standard message handling if possible.  The syntax
    MESSAGE W008(ZTM) DISPLAY LIKE 'I'.
    gives me a dialog box but handles the message as an error hence processing stops and the user returns to the screen.  I want this functionality but with the ability to display several lines in the message pop up box.  I've looked at the function modules POPUP_DISPLAY_MESSAGE but this displays only 1 line and POPUP_TO_CONFIRM which handles multiple lines but doesn't stop processing (unless further code is added to handle the response).  Can someone suggest a standard of way of achieving this requirement or how to handle a response as an error in the subsequent processing after a call to function module POPUP_TO_CONFIRM.

    hi,
    you can handle like this.
    call function 'POPUP_TO_CONFIRM'
            exporting
              titlebar                    = text-000
      DIAGNOSE_OBJECT             = ' '
              text_question               = v_text
              text_button_1               = 'YES'
      ICON_BUTTON_1               = ' '
              text_button_2               = 'NO'
      ICON_BUTTON_2               = ' '
              default_button              = '1'
              display_cancel_button       = 'X'
      USERDEFINED_F1_HELP         = ' '
             start_column                 = 25
             start_row                    = 6
      POPUP_TYPE                  =
      IV_QUICKINFO_BUTTON_1       = ' '
      IV_QUICKINFO_BUTTON_2       = ' '
           importing
             answer                      = v_ans
    TABLES
      PARAMETER                   =
           exceptions
             text_not_found              = 1
             others                      = 2
          if sy-subrc <> 0.
            message id sy-msgid type sy-msgty number sy-msgno
                    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          endif.
          case v_ans.
            when '1'.
              leave program.
            when '2'.
              call screen 100.
            when others.
              call screen 100.
          endcase.
      endcase.
    Here : 1 means yes,
              2 means no.
    Regards
    Sandeep Reddy

  • Advantages of Using Queued Message Handler vs. Standard State Machine

    Hello,
    What are the advantages of using a Queued Message Handler?  Also, why are they more powerful than using Standard State Machines?
    Thanks!

    They are really just sort of an extension of a state machine.  The general idea is that you have one loop doing a specific job.  You then use a queue to tell it how/when to do this job.  For instance, I might have a log file loop.  I will send it commands to open a file, write some data, write some more data, and finally close the file.  Each of those commands are coming from the queue.  The beauty with this setup is that anybody that can get a reference to that queue can send the command to that loop.
    So the QMH is "better" than a state machine mostly because of the decoupling of functions.  In a given application, I will have a loop for log file writing, GUI updates, reading of a DAQ, instrumenet communications, server communications, etc.  Trying to do all of that in a single loop state machine is a major pain in the rear end.  Seperating them out makes life so much easier.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Empty-Message Handling is not working in receievr File Adapter

    Hi All,
    I have selected "Empty-Message Handling" = 'Ignore'in Receiver File adapter, but still empty files are creating in target directory.
    Message mapping generates output based on the conditon, if the condition is 'false' mapping will generate empty file (no data is being mapped).
    Why Receiver file adapter is processing empty fiels even i set 'ignore' empty fiels in configuration (ID)?
    Hoe can i manage not to place empty fiels in target directory?
    File type is '.txt'
    Your help would be appreiciated greatly.
    Thanks,
    Rajesh

    Not sure why is it not working. Make sure the channel is activated and cache is refreshed properly. But as a workaround you may use OS script checking for size of message and deleting it or configure a BPM to avoid the file creation. Or else an adapter module as shown
    /people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module
    Regards,
    Prateek

  • Recevier adapter empty message-handling ignore

    Hi all,
    I configured file receiver adapter with file content conversion (comma separated).
    In processing parameters Empty-message handling is set to Ignore.
    Payload that is in message generated from SAP is:
      <?xml version="1.0" encoding="utf-8" ?>
         <mt_ap_invoice xmlns:prx="urn:sap.com:proxy:DES:/1SAI/TAS128FC2C2C3C8E901DC22:700:20 08/06/25" />
    There are no any data that is filling structure (structure main node is defined as 0...unbounded) and still empty file with 0 bytes is created.
    Please can you tell what is wrong in this setup as In case of empty message I don't want that file is generated?
    Regards,
    Nenad

    - open Integration Builder
    - open your file receiver adapter
    - go to tab Processing
    - change Empty Message-Handling to 'Ignore'
    Cheers,
    André

Maybe you are looking for