Diff between BADI and USER EXITs
Hi,
What is the difference between the BADI and USER EXITs?
Thanks,
Satish
HI
GOOD
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
What is difference between badi and user-exists?
What is difference between enhancements and user-exists? and what is the full form of BADI?
I have another doubt in BDC IN BDC WE HAVE MSEGCALL (i did not remember the > correct name) where the error logs are stored, MSEGCALL is a table or structure.
What is the system landscape?
1) Difference between BADI and USER-EXIT.
i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
ii) BADI's are oops based.
2) About 'BDCMSGCOLL' it is a structure. Used for finding error records.
3) Full form of BADI 'Business addins'.
3) System land scape will be depends on your project
Ex:- 'Development server'>'Quality server'-> 'Production server'......
THANKS
MRUTYUN
Similar Messages
-
Differences between BADIS and User-exits
Hi everybody,
I am new to ABAP and wonder what are the differences between BADIS and User-Exits. I read paper but did not find a SAP documentation yet.
Does anybody know where to find a sap document which explains both technologies?
Greetings, ADHi,
User-Exit is a specific place in a transaction-process where SAP offers
third parties to include there own business functionality. Actually
User-Exit is the namespace used for Exits programmed by SAP specifically
for SD. For the other modules it's called Customer-Exit.=20
>Business Add-Ins (BADI) =20
The use of object orientated code within SAP has lead to new method of
enhancing standard SAP code called Business Add-Ins or BADI's for short.
Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement
a BADI.
For better understanding visit.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/779183#
Hope it was useful.
Thansk,
Sandeep. -
Difference Between BADI and User Exits
Hi..
generally BADIs & User Exis are used exensively in SAP SD...
Can anybody throw some light waht is difference between them ...
Kindly please reply......
Regards
NishaHi
ifference Between BADI and User Exits
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
What is difference between badi and user-exists?
What is difference between enhancements and user-exists? and what is the full form of BADI?
I have another doubt in BDC IN BDC WE HAVE MSEGCALL (i did not remember the > correct name) where the error logs are stored, MSEGCALL is a table or structure.
What is the system landscape?
1) Difference between BADI and USER-EXIT.
i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
ii) BADI's are oops based.
2) About 'BDCMSGCOLL' it is a structure. Used for finding error records.
3) Full form of BADI 'Business addins'.
3) System land scape will be depends on your project
Ex:- 'Development server'>'Quality server'-> 'Production server'...... -
BADI and User Exit...
Hi Guys,
From my understanding and trying out tutorials on BADI, what is the difference between BADI and User Exit?
What is the best way on how to use User Exit? There are so many user exit provided by SAP.
Thanks and appreciated.
William Wilstroth.Hi
check this link,hopefully you will get your problem solved.
Re: User Exit / BADI
As far as <b>What is the best way on how to use User Exit? There are so many user exit provided by SAP.</b> is concerned. You have to choose an user exit according to your requirement. e.g MM06E005 is used to only for the purpose <b>Customer fields in purchasing document</b>
Hope this helps
regards
Amit
Message was edited by: Amit Kumar -
BADI and User exit for MIGO item and header enhancement
We want to add three extra fields in MIGO screen for specific movement type 101 . Two fields at item level and one filed at header level .
Item level fields are independent fields it will store in separate z-table and z-field and dont't have any relation with other table .
but header field has some relation with quantity field in item level . All the item quantity has to add up in header , Is it possible to add up .
What are the BADI and user exit need to use for this enhacement and etc required detailsHi Raghavendra,
Use BAdI MB_MIGO_BADI.
It has all the methods that cater your requirement.
Try to have a design such that you can store the values within the document by enhancing the tables using Append Structures, they surely have a link with the document.
regards,
Aabhas K Vishnoi -
Hello,
Can anybody tell me what is the difference between user exit and BADI?
how we can use this two enhancement in real time project?
what is the difference between customer exit and user exit?
Thank you.Hi ,
exact difference b/w user exits and customer exits
Customer exit and User Exit
customer exit
What is Customer Exist?
This query is one of the most frequently asked one..so please search in the forum itself for answers..reward if helpful
Regards
Byju -
Diff between userexit and customer exits
hi friends,
what is the diff b/w userexit and customer exits.
thanks in Advance.Hai,
Here is the clear differentiation:
User exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
User Exits : -
1. User exits are routines which SAP allows you to add in additional
customized programs process without affecting the standard SAP programs. SAP
user exits are usually declared as a form routine :-
form userexit_xxxxx
endform.
2. No need to create project in CMOD/SMOD.
3. Won't be automatically transported during version upgrade.
Customer Exits :-
1. Could be either Function Exits or Menu Exits. SAP will provide certain
FMs which will be called during the execution of SAP transactions.
2.Generally require the developer to create a project in CMOD/SMOD.
3. Will be automatically transported during version upgrade.
Types of Exits
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
CASE okcode.
WHEN 'BACK OR EXIT'.
CASE sy-dynnr.
WHEN '100'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN '200'.
Note that you can write any code that satisfy your needs. ****
But in this case, this was wrote as a sample code for reference sake. ****
And you can test it. ****
SET SCREEN 100.
LEAVE SCREEN.
ENDCASE.
ENDCASE.
Hope u got the difference now.
Reward points if it helps you.
Regds,
Rama.Pammi -
Diff Between USEREXITS and CUSTOMER EXITS?
Hi all,
What is the Diff Between <b>USEREXITS</b> and <b>CUSTOMER EXITS.</b>REgards,
Kishore.Hi,
A point in an SAP program where a customer's own program can be called.
In contrast to customer exits, user exits allow developers to access and modify program components and data objects in the standard SAP System. On upgrade, each user exit must be checked to ensure that it conforms to the standard system.
There are the following types of user exit:
User exits that use INCLUDEs -
These are customer enhancements that are called directly in the program.
User exits that use tables -
These are used and managed using Customizing.
Customer Exit
SAP creates customer exits for specific programs, screens, and menus within standard applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
If you want to enhance the functionality of your SAP System, you should take advantage of the exits available in standard applications. There are two main reasons why you should use exits rather than modifying SAP software yourself. Add-ons attached to exits have the advantage that:
· They do not affect standard SAP source code
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
· They do not affect software updates
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System. You can only use customer exits if they already exist in the SAP System. You find find more information about locating applications with pre-defined exits in Locating Applications that have Exits
User Exits:
User exits allow you to add additional functions to the SAP standard.
Programs with user exits contain subroutine calls at certain points in their syntax that are identified by the prefix USEREXIT. The actual user exits are located in an include that has been assigned to a module pool. This is where customers can include any changes (enhancements) that they want to make to the system. These includes are always processed during program flow.
Advantage: In principle, customers can modify anything they want that is found in the include (tables, structures, and so forth).
Disadvantage: SAP cannot check the individual enhancements themselves which often leads to errors in the enhancement process.
Thanks and Regards,
Bharat Kumar Reddy.V -
Help needed in BAdi and user-exits
Hi ,
Can any one send me the procedure how to find out user-exits and about BAdi's.
Thanks in advance
Udayhi Uday,
Welcome to <b>SDN</b>
here is the sample program to find the user exits
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
To find the function exit
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
if u find it useful plz markt the points
Regards,
Naveen -
Badi and user exit active at the same time ?
Hi All,
Please let me know whether
1> I can have a BADI and a user exit both active at the same time for the same enhancement?
2> I can have a BADI and a user exit both active at the same time but they are for different purpose.
eg: BADI -- > to change statistical date of po item line on ME21N screen
User Exit -- > to change the exchange rate on PO header on me21n screen
Please response to the second point... as this is what I am working on.
Regards,
ShitalHello,
Thanks for your response.This is my code.
WSA_header = IM_HEADER->GET_DATA( ).
wsa_header-wkurs = '0.6668'.
CALL METHOD im_header->set_data
EXPORTING
im_data = wsa_header.
Kind Regards,
Shital -
Hi Gurus,
I need your assistance for the below requirement.
In AS01 ( Create Asset ), while creating ASSET the Equipment should be created. This syncronization is already done in the customization.
1.The requirement is the Equipment Field in the ALLOCATION Tab should automatically get the Asset Number Value once we click the ALLOCATION Tab.
2.And also the Equipment should be created only if the Evaluation Group 2 is 'Y'.
i checked all the Exits and BADI's available. But my requirement is not met. please help me in this.Hi,
Transaction Code - AS01 Create Asset Master Record
Exit Name
AAPM0001 Integration of asset accounting and site maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Reward points if useful....
Regards
AK -
Standard Function Modules, BAPIs, BADIs and User Exits in OM
How do I check what are the Standard Function Modules / BAPIs in OM or any HR sub modules like PA, Comp, TEM etc..
use Tcode <b>BAPI</b> and navigate to relevant module.
for FM go to se37 and search with HR* or RH* -
Badi's, user exits, function modules and reports
Hi all,
Can anybody tell me the exact diff among Badi's, user exits, function modules and reports? I mean what are their functions?
thanksHi,
This is a beginners question,but still you can check the below links.
BAdis:
Regarding Enhancements/User-Exits in ABAP
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/a1d548892b11d295d60000e82de14a/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/779183#
FM:
http://help.sap.com/saphelp_nw70/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
Reports:
http://it.toolbox.com/wiki/index.php/How_many_types_of_reports_are_there_in_ABAP_and_what_is_the_difference_between_them%3F
Regards,
saurabh -
FB03 BAdI/BTE/user-exit
Hi,
I need to customize FB03 transaction, so that right after the document selection or via custom button at document display, I'm able to perform needed action. Preferably, it would be the custom button way, at the document display there would be a button in the application bar at the level as document/original display is.
I've been looking for propriate BTE, BAdI and user-exit, but haven't found anything suitable, that would perform at the document header level. I know how to add a button to the item level, but that's not what I need. If anyone knows about any possible customization (except changing the original), help would be appreciated.
Thanks in advance.
Best regards,
Tomasbte or exit for f-03 and F-04
What is the actual requirement ? business point of view .
It may be possible that for a validation you can use the standard functionality of GGB0.
Cheers ,
Dewang -
BAPIs,BADIs AND Usre exits
Hi all,
I wants to learn <b>BAPIs,BADIs and User exits</b> so please help me in finding the right material to learn these thing with practicle knowledge
Thanks,
GirishHai Girish
Check the following Documents
what is BAPI?
BAPI stands for Business API(Application Program Interface).
I have answered this question before..
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
Please check out this thread..
Re: bapi
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
User Exits
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project,
and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules.
These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD.
When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next
time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu
entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer. You are not writing the code directly in the function module,
but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements.
Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only
be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Have look at this links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
BADI'S
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Thanks & Regards
Sreenivasulu P
Message was edited by: Sreenivasulu Ponnadi
Maybe you are looking for
-
My ipod touch won't respond. Shortly after I downloaded IOS 8, it quite responding. All I get is the Apple sign. I connected to my computer and tried updating and was able to download the USB connection for the device but received an error when it t
-
User with no admin rights can not authenticate on wikis or blogs
I just set up my OD and proceeded to add users in the workgroup manager. I create an account for myself and gave it full admin rights under the privileges tab (in work group manager). I then created a test user account and gave it no privileges. My a
-
My itunes is empty, but all of the music is still on my computer...
my roommate updated my itunes and suddenly all of my music was erased from the program. it's still on the computer, but everytime i try to import it into the new itunes, it duplicates the music and ends up using twice the hard drive space -- which i
-
There are some records where century is shown as '00', i use following query for this; select claim_no, rate_change_date from core_business.cb_pensioner where extract (year from rate_change_date)< 100 and status='A' order by 1;Is there is better way
-
I have an iPhone 4 and am in Nepal. My phone was previously able to connect to wifi, but now is unable. I have an iPad and that is able to connect just fine. This problem is with every wifi hotspot I have tried so it is the phone not the modem.