Diff. between Tax Code and Condition Types

Hi,
What is the diff. between Tax Code and Condition Type???
Why we maintain Tax Codes under Invoice Tab in PO, when Condition Types are available for Calculation Procedure...???
Please guide..

hi..
Tax code : Tax code in some what more specific for calculating the tax...some material is having 2% tax..some having 3 % tax..etc..and these are input tax...so..these tax code will be of type input tax..
now..based on the nature of tax type amount will be calculated....
suppose tax code is calculation of 2 condtion type so ..we can do it in tax code conditon record fv11 also..
so..tax code can be a combination of cond type...
where as through cond type also we can also achieve this..by using one statistical cond type...
Cond Type : cond type is for the daily pricing configuration..how system will calculate the price for a centain material we can make define the rules here...
Try this out..
Thans

Similar Messages

Create New Tax code and condition types

hi experts,
i want to create new tax code V10 and new condition types ZWKT and ZSTX under V10.
i have a requirement that is create service general Purchase Order with following tax conditions
1. Work Tax 4% on 70% of Bill Amount.
2. Service Tax 12.36% on 33% of Bill Amount.
while creating PO when user select ZWKT and ZSTX, system should calculate 4%( on 70%) and 12.36% (on 33%) and place the tax amount on relevant fields automatically.
( i tryed with tcode:FTXP and created tax code(country key: IN, procedure: TAXINN and taxtype: V input tax) but problem with assigning condition types and calculation procedure)
please help me in this issue (step by step).
Thanks.
srinu.

Hi,
Here you have to create two dummy condition type for Base Value. One for Service Tax and other one for Work Tax.
Then create two condition type for Work Tax & Service Tax.
Ex : Work Order Base Value condition type is "A"
Service Tax Base Value condition Type is "B"
Work Order Tax condition Type is "C"
Service Tax condition type is "D"
In Pricing procedure just add all the above condition type as below
Both Base Value condition type will be calculated from System Base Value & in FV11 maintain the Base Value percentage against the Tax Code & Condition Type as per ur req (70% for Work Tax & 33% for Ser Tax)
Work Order Tax & Ser Tax will be calculated from respective Base Value. In FV11 just maintain the tax %.
Sangram

AP - Supplier Sites Invoice Tab - Diff Btwn Tax code and Line Level

Hi All,
In paybles options setup, the Invoice Tax calculation is set to LINE Level and Allow Tax Calculation Override check box is checked.
While Defining the supplier, in the Invoice Tab of Supplier Sites, I changed it from LINE Level to Tax Code and unchecked the Allow Tax Calculation Override and Distribution Amounts Include Tax check box is Checked.
How will this change Impact on while creating the Invoices. What will be the Diff when we change the Tax Calculation from LINE Level to TAX CODE.
Help Appreciated.
Thanks

user449960,
Your scenario is a functional issue, follow Sumit's advise. If you feel there is something related to OAF, put your thoughts here.
--Shiv

Different tax code for condition type

Hello Gurus,
I have defined a calculation schema for import POs.
I would like to automatically determine the default tax code on the invoice verification depending on the condition type, for examle:
Cond type Tax code
ZF01 Freight --> C0 0%
ZS01 Custom agent --> C1 13%
Any ideas?
Regards,
Nelson.

If you wish to default the tax code for the planned delivery costs this must be obtained from an independent source which is OMR2 If you do not wish to default the tax code, then the only alternative is to select the tax code when in transaction MIRO.
At least withing the standard I don't know any solution for that =/
Sorry & good luck!
Plauto

Pricing procedures and condition type table relation

Hi all
i m facing a problem while printing the tax procedures description in debit note and creditt note a Zprogram.
im not able to link between Pricing procedures and condition types , that is how to get pricing procedure from a condition type ? which tables can be used for this?
already i ve checked T007s,t007a,t685t,t683..
how to get the pricing procedures acording to condition type and tax code?
please reply me as soon as possible?
thanks
sachhidananda

Hi,
Check out the Table KONV
This will help u
Rgrds
Sandeep

Contracts and condition type

hi,
would anyone know what the link is between contract number and condition type?
thanks a lot.

hi
good
contract number->
http://help.sap.com/saphelp_srm30/helpdata/en/75/c65d3a0eb60365e10000000a11402f/content.htm
CONDITION TYPE->
V/05 - Condition Table for V/07
e.g. a business may no longer wants to have a sales discount based on the sales organization, customer group, and material, but decided that the discount should be based on the sales organization, customer group and material group.
V/06 - Create new condition types by copying a similar conditions type and changing it according to your needs.
Double click on the condition type to change the control options
V/07 - Access Sequences for condition type
V/08 - Pricing Procedures for condition types.
The pricing procedure is also used in the account determination. This determines the general ledger accounts to which prices, discounts and taxes must be posted.
Click on the Pricing Procedures e.g. PR0000 - Condition Supplements for PR00
Click Control - e.g. Tick Mdt if you want the condition type to be mandatory
OV34 - Define account key
OV35 - Assign account key
Actky - Revenue account
Accrls - Accruals account
OVKK - Determine which Pricing Procedures to use for which Condition Type.
THANKS
MRUTYUN^

What is the diff bet condition class and condition type.

Hello Gurus
What is the diff bet condition class and condition type.
I have seen so many threads on this but not getting the exact usefullness.
Difference between Condition class and Condition Category
What is the difference between condition class and condition category?
Condition class and condition category etc.
As per the knowledge i gained condition class tells the type of the condition ie either price , discount ,taxes etc.
Then please tell me why we require cond category.Please give a business scenario where we can justify it use.

Hi shiva
Difference between Condition Category and Condition Class
Condition Category -
It is the Classification of conditions as per the categories ,Say for example Freight condition types you have the same conditon category
Condition class -
It classifies the condition types as price , discounts , taxes , discount etc
Regards
Srinath

Withholding tax code and Withholding tax type relation

Hi All,
Here is my requirement:
I need to get the WT code description for the tax codes I get in BSIS (BSIS-QSSKZ). The problem is when I try to get the same from T059ZT, I need to have the two key fields WITHT (Indicator for withholding tax type) & WT_WITHCD (Withholding tax code).
But from BSIS I am having only the field QSSKZ (Withholding Tax Code)and not the WT type.
I need to know, how can I get the WT type based on WT code? I tried WITH_ITEM but its of no use, as it has both these fields as key fields.
Thanks in advcane.
Anand

Hi,
Hi,
I am working on an enhancement for withholding tax.
The withholding tax base has to be calculated in the exit.
I found that MRM_WT_SPLIT_UPDATE is the badi which can be implemented and can contain the logic for the calculation.
The transaction MIRO calls this BADI.But I need to call the BADI even for FB60,FB65,F-43,F-41 and F10.Is this part of configuration.Please let me know how to enhance the withholding tax calculation.
Thanks,
guest

Tax codes vs Conditions.

Hello friends,
Here I got a requirement from my client.
They want to add some amount to base price before excise duties to be calculated and the same amount to be deducted after the excise calculation and before the tax calculations.
the total after the deduction should undergo the tax calculation i.e, VAT ...
Here I assigned the condition types to the pricing procedure and tried to post PO. In this the conditions the amount is added and also deducted.the Tax calculation is also going good here but we are assigning the tax code to the PO in Invoice tab where the tax calcution is taking on the net price only.
I want that tax calculation should be carried out on the price after deduction only.
Please suggest me to get through this.
and if possible explain the relationship between Tax code calculations and the condition calculations which are done in PO at the same time......
regards,
Mohan.P

Hi,
We are waiting for the answer..

Diff between ECC5.0 and ECC6.0

Hi,
This is Ramakrishna,can any one give proper explanation diff between ECC5.0 and ECC6.0
Regards
Ramakrishna

Hi,
Refer following link;
[SAP ERP Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/]
Following are the basic differences as far as MM Module is concerned;
Pickup list - Batch where-used list display in transaction MB56
u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
- Goods receipt
- Goods issue
- Transfer posting
- Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
New report : display list of invoice documents (MIR5)
u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
u2022 In the output list, the report shows both posted and held invoices.
u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
Requirement prioritizations in materials management
u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
Mass maintenance of outline agreements
The following two transactions available:
u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
Commitment plan for purchase contracts
u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
u2022 This commitment plan itself can have any number of items.
u2022 User can define a value and a validity date for each commitment plan item.
u2022 This enables user to pre plan different values for different periods of time.
u2022 The software generates an earmarked fund document for a defined commitment plan item.
u2022 This earmarked funds document can in turn contain several different items with different account assignments.
u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
u2022 Account assignment to a different account assignment object is then no longer allowed.
Availability check in "Enjoy purchase order and requisition"
u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
- To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
- Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
u2022 Two settings are possible with availability check:
- Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
- Delivery proposal - Full confirmation
External services: putting service items in the purchase order on hold (changed)
User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
Customizing transactions OX18 replaced by view
The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
Goods receipt: new movement types in inventory management
The following new movement types are available in inventory management:
- 107: Goods receipt to valuated goods receipt blocked stock
- 109: Goods receipt from valuated goods receipt blocked stock
Prepayment of invoices
This functionality is characterized as follows:
u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
u2022 When the software posts invoices, it continues to execute the standard checks.
u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
Purchasing accounting information to the former SAP Business Information Warehouse
u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
u2022 Functionality for report RMMR1MRS is enhanced.
u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
u2022 To do so, set the relevant indicator on the initial screen of the report.
Parking service items
It is now possible to put service orders without errors or with commitment errors on hold.
Report MB5B : Stock on Posting Date
u2022 This Report is available with u201CNon-Hierarchyu201D display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
u2022 This functionality is not available in Release 4.7.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location

Deafult tax code and tax jurisdiction per vendor

Hi,
   We are using tax jurisdiction in Process, now while creating Po every time according to vendor we have to enter the tax jjurisdiction and tax code , i s there any mwthod with which we can set default tax code and tax juridiction code as per vendor means we want to maitain as per vendor code, so that for eah item i n that PO , tax code and jurisdiction code will come automatically.
I have also check by making the tax jurisdiction code mandatory in Vendor master , in vendor master i have added tax jurisdiction for the vendor but while creating PO, system is not selecting the tax jurisdiction automatically.
   regards,
    zafar
Edited by: zafar_karnalkar on Jun 4, 2010 6:18 AM

Hello,
Tax Jurisdiction code will be determined from the plant. Please check your Plant/Site Master. SAP provided a BADI ME_TAX_FROM_ADDRESS also to redetermine Tax Jurisdiction code based on custom logic.
For Tax codes, you have to maintain condition records for condition type NAVS using MEK1. There are many standard access sequences available to maintain this. You may also build custom one if needed.
Thanks,
Venu

Diff between sap query and abap query

diff between sap query and abap query

Hi,
ABAP query is mostly used by functional consultants.
SAP Query :
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query,:
As far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
regards,
vasavi.
reward if it is helpful.

Check of tax code by document type?

Hi Guru's!
Ís there a possibility to have a check on allowed tax codes by document type?
For example: document type: vendor invoice Europe
-> only european tax codes are allowed
In Italy we have the requirement to have many different document types for sepcial number ranges, related to the kind of VAT. This is why we now want to have a system check for allowed tax codes by document type?
Or any other criteria?
More than that, do we have a possibility to hide useless document types by company code?
Many thanks in advance!
Sandra

Dear Sandra,
As far as I know there is no check between the Document type and the vat code into the standard System.
If I were You, I would build up an FI validation for the user...if the Document type is XX please use the vat code YY.
I hope this can help You.
Mauri

Diff between select single and select upto 1 rows.

Hello aLL,
PL tell what is technical diff between select single and select upto 1 rows and how it is affecting the performance.
Rushikesh

Hi
Knowing when to use SELECT SINGLE or SELECT ... UP TO 1 ROWS
A lot of people use the SELECT SINGLE statement to check for the existence of a value in a database. Other people prefer to use the 'UP TO 1 ROWS' variant of the SELECT statement.
So what's the difference between using 'SELECT SINGLE' statement as against a 'SELECT .... UP TO 1 ROWS' statement ?
If you're considering the statements
SELECT SINGLE field INTO w_field FROM table.
and
SELECT field INTO w_field FROM table UP TO 1 ROWS. ENDSELECT.
then looking at the result, not much apart from the extra ENDSELECT statement. Look at the run time and memory usage and they may be worlds apart.
Why is this ?? The answer is simple.
The 'SELECT SINGLE' statement selects the first row in the database that it finds that fulfils the 'WHERE' clause If this results in multiple records then only the first one will be returned and therefore may not be unique.
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Get the difference ??
If not, here is a good example, credit for this example goes to Richard Harper, a friend of mine on sapfans.com :
Create a Ztable called ZDifference with 2 fields in it, MANDT of type MANDT and POSNR of type POSNR. Make sure both of these are keys. Also create a table maintenance dialog for it (SE11->Utilities->Table Maintenance Generator). Fill the table with ten rows 000001-000010.
Then run the program shown below:
Code:
Program: Z_Difference
Purpose: A program that demonstrates the difference
between SELECT SINGLE and SELECT UP TO n ROWS.
This program requires the data table Z_DIFFERENCE
to have been created according to the structure
outlined in the text above and populated with
at least 10 records.
Creation Date: 21/04/2004
Requested By:
Reference Doc:
Author: R Harper
Modification History:
Date Reason Transport Who
Report Z_Difference
Message-id 38
Line-Size 80
Line-Count 0
No Standard Page Heading.
Start-Of-Selection.
Data: w_Single type Posnr,
t_Rows type standard table of Posnr
initial size 0
with header line.
Select single Posnr
from zDifference
into w_Single.
Select Posnr
into table t_Rows
from zDifference
up to 1 rows
order by Posnr descending.
Write :/ 'Select single:', w_Single.
Skip 1.
Write :/ 'Up to 1 rows :'.
Loop at t_Rows.
Write t_Rows.
EndLoop.
You should see the output:
Select single: 000001
Up to 1 rows : 000010
The first 'SELECT' statement selected the first record in the database according to any selection criterion in the 'WHERE' clause. This is what a 'SELECT SINGLE' does. The second 'SELECT' has asked the database to reverse the order of the records before returning the first row of the result.
In order to be able to do this the database has read the entire table, sort it and then return the first record. If there was no ORDER BY clause then the results would have been identical (ie both '000001') but the second select if given a big enough table to look at would be far slower.
Note that this causes a problem in the Extended Program Check if the full key is not specified in a 'SELECT SINGLE'. Replacing the 'SELECT SINGLE' by an "UP TO 1 ROWS" will give the same exact results without any warning but the program will run slower and consume more memory. This is a good example of a warning that we should ignore... considering you are sure of what you are doing !!

What is difference between tax procedure and pricing procedure?

Dear Gurus,
Would you please let me know the difference between tax procedure and pricing procedure?
Why it is necessary to maintain them separately?
Thanks in advance,
Ranjan

Hi
Tax procedure settings
OBBG - Assign Country to calculation procedure.
OBCO - Specify structure for Tax Jurisdiction code. For country like U.S.A.
LG -> character length of first level of hierarchy within your tax jurisdiction code structure.
LG -> Second level of hierarchy as above.
LG -> Third level of hierarchy as above.
LG -> Fourth level of hierarchy as above.
TX -> Tick if you want the system to determine taxes on a line by line basis instead of determining them on a cumulative basis
per tax jurisdiction code.
OBCP - Define Tax Jurisdiction code
Dil -> Tick if you do not want tax amounts included in the based amount used for calculating cash discounts.
Txl -> Tick if you want the cash discount amount deducted from the base amount that is used to calculate taxes.
FTXP - Define Taxes on Sales/Purchases Code.
OBCL - Allow Tax codes for non-taxable transactions.
In MM module, pricing procedure is used during RFQ and PO creation. Total value of material based on all addition and subtraction like discount, surcharge, tax, freight, etc. In this we are defining pricing procedure and linking to vendor and purchase department through the virtual schemas.
Following steps for pricing procedure as,
1. Define conditions.
2. Define pricing procedure.
3. Define virtual purchase organization and vendor.
4. Info Record.
Regards,
Raman

Diff. between Tax Code and Condition Types

Similar Messages

Maybe you are looking for