Difference between "change auth data " and "expert mode" in pfcg
Gurus ,
i need to know , what is the difference between
"change authorization data "
and
"expert mode for profile generation" in PFCG .
and what is the significance of the three options that we get when we choose expert mode ?
Hi Susin,
To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation.
If you are generating the profile for the first time, there is no difference between the two modes.
When you change a role, you must regenerate the authorization profile. In this case, the status of the profile generation is displayed red or yellow at the top of the Authorizations tab page.
If the status display is red, you must perform an authorization data comparison, since the menu was changed since the last profile generation or no authorization data exists.
If the display is yellow, the authorization data for the role was changed and saved after the last generation. The generated profile is no longer current. You need to regenerate it.
The significance of the three options that we get when we choose expert mode is as follows:
Choose one of the options to maintain the authorization values (in normal mode, the correct option is automatically set):
1> Delete and recreate profile and authorizations
All authorizations are recreated. Values which had previously been maintained, changed or entered manually are lost. Only the maintained values for organizational levels remain.
2> Edit old status
The last saved authorization data for the role is displayed. This is not useful, if transactions in the role menu have been changed.
3> Read old status and compare with new data
If you change transactions in the role menu, this option is the preconfigured. The profile generator compares the existing authorization data with the authorization default values for the menu transactions. If new authorizations are added during this process, they receive the status New. Authorizations that already existed receive the status Old.
Note the following during the comparison:
Values for organizational levels that are no longer required are deleted, all others are retained. If new organizational levels are added, you need to maintain them.
The standard authorization for the object S_TCODE is always automatically filled with the current transactions from the role menu. It cannot be copied or manually changed, only deactivated.
Thanks,
Saby..
Similar Messages
-
Difference between Invoice created date and billing date.
Hi Gurus,
I opened the Billing Document in display mode(T.Code:VF03).In header data I found two tabs one is Created On and another one is Billing Date. Here in the billing document the both dates were different.
Please let me know the difference between Created On date and Billing Date.
your afforts are highly appriciated.
JYothi.Dear Jyothisd,
Invoice created date : Invoice created date is nothing but the date on which you have created the invoice.
Billingdate:Billing date is the date on which you suppose to do the billing for respective customer. Tease billing dates will be proposed to invoice from sales order if it is order related or else actual goods issue date is proposed to billing document as a Billing date if particular billing document is delivery related.
If you want you can change the Actual billing date the result is invoice created date.
Please revert if you want any further clarifications
Thanks&Regards -
Difference between P.O.date and P.O.created date
Hi,
Could you tell me difference between purchaseing doucment date and purchase order creaed date.
Because some time in my org. po created after GR means in past date. So there is difference between
po date and po created date. where this po created date is maintained in purchase order
Thanks and Regards
AnilDear Anil,
Please check table EKKO with ta SE11.
Created Date => EKKO-AEDAT
Date on which the record was created
Document date => EKKO-BEDAT
Date on which the purchasing document was created
EKKO-AEDAT = Date on which the record was created
and also "Created By" also recorded automatically
by system.
Document date or EKKO-BEDAT normally default as
today when you create the PO via ME21N. This field
appear at top right of the screen. However this date
can be change to any date that required.
Thanks
Loke Foong -
What is difference between tha master data and tranction data
Hi, Gurus
this is sudhakar
i want to no what is the difference between the transaction data and master data give with examples .
Thanks
sudhakarHi,
The most important data classes are master data, transaction data, organizational data and system
data.
Master data is data that is rarely modified. An example of master data is the data of an address file, for
example the name, address and telephone number.
Transaction data is data that is frequently modified. An example is the material stock of a warehouse,
which can change after each purchase order.
Organizational data is data that is defined during customizing when the system is installed and that is
rarely modified thereafter. The country keys are an example.
System data is data that the R/3 System itself needs. The program sources are an example
for more info go through..
[http://help.sap.com/saphelp_nw70/helpdata/]
regards,
NR -
Hi All,
I have seen many open source api's where they are updating dates with the following code
new Date(System.currentTimeMillis())
when i print the new Date() it prints the same
what is the difference between using new Date() and new Date(System.currentTimeMillis()) ??
Thanks,
J.Kathirwhen i print the new Date() it prints the same
It does because of backward compatability. This constructor exists in version 1.3.1 but not in newer versions.Really ? Please point me to where you read that.
API doc 1.5 : new Date() (still there, not even deprecated)
A quick look at the code for this constructor: /**
* Allocates a <code>Date</code> object and initializes it so that
* it represents the time at which it was allocated, measured to the
* nearest millisecond.
* @see java.lang.System#currentTimeMillis()
public Date() {
this(System.currentTimeMillis());
} -
Difference between a starting date and time and ending date and time
Hi All,
I need to bring out the difference between a starting data and time and ending date and time. Difference should be in time I mean it should be in hours or minus or seconds.
I am sure there must be a Function module for this, Has anyone of you been in search of this kind of FM, Kindly suggest me. It is urgent.
Thanks
MahenHi,
Check this out.
data : date1 type dats , " System data type for Date (sy-datum)
date2 type dats,
time1 type tims, " System data type for time (sy-timlo)
time2 type tims,
days type i,
scd type i,
t_mt type i.
days = date1 - date2. " Diference in days.
Scd = time1 - time2. " diference in seconds.
t_mt = ( days * 24 * 60 ) + ( scd / 60 ).
total diference in minute
<b>Reward Points & Mark Helpful Answers</b> -
Difference between earliest master data and master data change bonus
Hi,
Can anyone tell me what is the exact difference between earliest master data change and master data change bonus? Whenver any infotype is changed, why are the dates updated in both the fields? Is it not enough if only Earliest master data change field is updated? I was thinking that Earliest master data change bonus field is updated when IT267 is created, but even if i change the time data both the fields are getting updated. Please advise?
ThanksHi,
Earliest master dat change date is date beyond which no master data change can be put in for employee in infotype.
It is used to restrict any master data entry beyond certain date as restriction for employees that client has set and is moreover controlled at control record level but ocassionally used at employee level whenever payment was hold for long time and so on.
Master data change bonus date is date which gets automatically filled in whenever there is any master data change.
This date cannot be past earliest master data change date and will throw error if tried for employee to input.
Thanks,
Ameet -
Disk Utility: Differences between "Zero Out Data" and "7-Pass Erase"?
I'm wondering if anyone knows if there's a significant difference between the "Zero Out Data" erase option in Disk Utility (specifically Disk Utility 10.5.5), and the "7-Pass Erase" and "35-Pass Erase" options in same software.
Here's why I'm asking: I have a co-worker with an iMac G5 20" 1.8GHz with 160GB internal hard drive. As a result of the power supply overheating a week ago due to dust, some hard drive problems resulted. I'm trying to assess whether these are 'soft' formatting problems that can be recovered from, or 'hard' problems requiring replacement of the hard drive and/or power supply.
Following the failure, I removed the dust and restored the iMac to servicable form. The power supply seems to be OK now. The next thing was to attempt to recover as much data as possible from the 160GB, as the last full backup was a week old. Carbon Copy Cloner, shell copy via 'sudo cp -p -R -v', Finder copy, and DiskWarrior recovery all met with problems. TechTool Pro identified a huge swatch of unreadable sectors during repeated surface scans. Unfortunately, these unreadable sectors were located midway in the OSX boot partition (an 80GB partition), and not in the other 80GB partition devoted to lower priority video data.
When I was satisfied I had backed up the data to the best of my abilities, I next set out to reformat the drive and see if the bad sectors could be eliminated or remapped out of existence. I did a "Zero Out Data" erasure in Disk Utility (with no errors during the erase), but TechTool Pro showed the bad sectors persisted in equal strength at the same location. I next executed a sixteen hour "7-Pass Erase" (again no errors, and confirming that it takes about an hour per 10GB). The next day when I ran TechTool pro, all of the sector errors had disappeared. I'm a bit perplexed as to why the "7-Pass Erase" seems to have recovered the use of the drive. Is it possible that there are simply thousands of bad sectors now remapped that I'm not seeing? [If so, how do I check for this?] TechTool Pro has not reported any S.M.A.R.T. issues to date on the drive. What am I to make of that?
There are some related threads I've checked into, but I'm not sure how to properly assess my situation based on this information:
<http://discussions.apple.com/thread.jspa?threadID=232007>
<http://discussions.apple.com/thread.jspa?threadID=138559>
<http://discussions.apple.com/thread.jspa?threadID=118455>
Since the iMac has three weeks left on it's one year warranty, and I've already moved the user to another machine temporarily, I'm thinking that the smart thing to so is to send it in to Apple to have them look at the power supply and hard drive. That way, when it returns, even if there is still a lingering hardware problem, at least it will be covered under warranty for another 90 days.
Any thoughts?
iMac G5 20" 1.8GHz Mac OS X (10.4.6) 1.25GB RAM, 160GB hard disk, SuperDriveHI, Bret.
The only differences between "Zero Out Data", "7-Pass Erase", and "35-Pass Erase" are the number of times a binary zero is written to every bit on the disk. "Zero Out Data" writes a binary zero once, whereas the 7- and 35-Pass options write a zero seven and 35 times, respectively.
Technically, one pass with Zero Out Data should be sufficient to map bad sectors out of service, a process also known as sparing. If a bad sector is encountered, it is both marked as "in use" in the directory's allocation table and added to the directory's "bad blocks file."
My understanding is that the Surface Scan of Tech Tool Pro should identify bad sectors every time it is run unless the bad sectors have been locked out by the drive controller of the ATA drive itself. This is because Surface Scan checks the entire surface of the disk.
What may have happened is that running "Zero Out Data" spared the bad blocks from a directory standpoint, but did not result in the drive's controller locking out those sectors for reasons detailed in the "Surface Scan" section of the Tech Tool Pro manual. However, the 7-Pass Erase may have resulted in the drive's controller locking out the bad sectors and why Surface Scan did not pick them up after such.
Given the problems you described, I concur with your plan to have Apple check the affected computer. You might also want to consider purchasing an AppleCare Protection Plan for that Mac: I recommend and buy these for all my Macs.
For some additional information on bad sectors, see the "Bad Sectors" section of my "Resolving Disk, Permission, and Cache Corruption" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Difference between using history data and do not
hi,
I'm Tran, I come from VietNam.
I've just learned LabView, I dont know the difference between using history data ( propety note of waveform chart ) and do not.
please help me. And give me an example in labview or give me some document of this problem!!
Tran
thanks!!!aloalo wrote:
I dont know the difference between using history data ( propety note of waveform chart ) and do not.
Your question isn't clear, but I would like to say that, I've many times used this particular property node for clear the data (graph) from the chart.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
Example - Using HISTORY PN [LV 80].vi 16 KB -
Difference between Change Authorization Data / Display Authorization Data
Hello,
My question is wrt to implementation of "principle of treble control" i.e three SAP administrators i.e.
1. Authorization data administrator
2. Authorization profile administrator
3. User Administrator
I have created a role & added a transaction to it e.g. "FAGLL03" or "FF67".
No authorization data is displayed in the authorization tab unless I enter authorization tab with change button and provide inputs for org level field & generate profile. Even when I save the profile with the proposed name, it status still says "No authorization data exists". Since no authorization data is available, administrator 2 is unable to generate profile. If administrator 1 has to generate profile then why is administrator 2 required.
Definition of Administrator 1 is:
The authorization data administrator creates the roles, selects transactions and
maintains the authorization data. He or she simply saves the data in the Profile
Generator since he does not have the necessary authorization for generating the
profile. He or she accepts the proposed profile name T-.... The authorization data
administrator may not change users, nor generate profiles.
Definition of Administrator 2 is:
The authorization profile administrator starts transaction SUPC and chooses All
Roles. He or she then restricts his selection, for example by entering the ID of the
role to be edited. On the next screen, he or she chooses Display Profile to check
the data. If all the data is correct, he or she generates the authorization profile. The
authorization profile administrator may not change users, change the data for roles,
nor generate profiles containing authorization objects beginning with S_USER*.
Thanks.Hasan Saeed Khan wrote:
Actually I started off my question with the "implementation of treble control" that SAP course AD940 suggests.
I had never heard of this treble control and the added value of splitting rolebuilding and profile generation doesn't make much sense to me but that's my personal opinion.
On the technical side of things: in your first post you state "No authorization data is displayed in the authorization tab unless I enter authorization tab with change button and provide inputs for org level field & generate profile."
It is also possible to change the data and save this but not generate the profile yet. I just tried this by doing the following:
Create role
Add transactions to menu
Edit profile, org levels & authroization data.
Hit 'save'.
Accept proposed profile name.
Go back to PFCG main screen and ignore message of profile not being generated. (Click 'continue')
And this leaves me with a role with yellow traffic light on the authorization tab an the profile status is: "Current version not generated"
So it should be possible to maintain roles and profiles separately. -
Difference between Activating Master Data and Attribute Change Run
Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
ChinnaWhen u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run. -
Query to find the difference between the last date and the second to the last date
Hi all,
Hope all is well.
I am working on the following problem because I am trying to improve my MS SQL skills. But I am stuck at the moment and I wonder if you could provide some assistance please. Here is the issue:
Table 1: Dividends
divId
ExDate
RecordDate
PayDate
Amount
Yield
symId
1
2013-02-19
2013-02-21
2013-03-14
0.23
0.00000
3930
2
2012-11-13
2012-11-15
2012-12-13
0.23
0.00849
3930
3
2012-08-14
2012-08-16
2012-09-13
0.20
0.00664
3930
4
2012-05-15
2012-05-17
2012-06-14
0.20
0.00662
3930
5
2012-02-14
2012-02-16
2012-03-08
0.20
0.00661
3930
6
2011-11-15
2011-11-17
2011-12-08
0.20
0.00748
3930
7
2011-08-16
2011-08-18
2011-09-08
0.16
0.00631
3930
8
2011-05-17
2011-05-19
2011-06-09
0.16
0.00653
3930
9
2011-02-15
2011-02-17
2011-03-10
0.16
0.00594
3930
10
2010-11-16
2010-11-18
2010-12-09
0.16
0.00620
3930
11
2010-08-17
2010-08-19
2010-09-09
0.13
0.00526
3930
12
2010-05-18
2010-05-20
2010-06-10
0.13
0.00455
3930
13
2010-02-16
2010-02-18
2010-03-11
0.13
0.00459
3930
Table 2: Tickers
symId
Symbol
Name
Sector
Industry
1
A
Agilent Technologies Inc.
Technology
Scientific & Technical Instruments
2
AA
Alcoa, Inc.
Basic Materials
Aluminum
3
AACC
Asset Acceptance Capital Corp.
Financial
Credit Services
4
AADR
WCM/BNY Mellon Focused Growth ADR ETF
Financial
Exchange Traded Fund
5
AAIT
iShares MSCI AC Asia Information Tech
Financial
Exchange Traded Fund
6
AAME
Atlantic American Corp.
Financial
Life Insurance
7
AAN
Aaron's, Inc.
Services
Rental & Leasing Services
8
AAON
AAON Inc.
Industrial Goods
General Building Materials
9
AAP
Advance Auto Parts Inc.
Services
Auto Parts Stores
10
AAPL
Apple Inc.
Technology
Personal Computers
11
AAT
American Assets Trust, Inc.
Financial
REIT - Office
12
AAU
Almaden Minerals Ltd.
Basic Materials
Industrial Metals & Minerals
I am trying to check the last date (i.e. max date) and also check the penultimate date (i.e. the second to the last date). And then find the difference between the two (i.e. last date minus penultimate
date).
I would like to do that for each of the companies listed in Table 2: Tickers. I am able to do it for just one company (MSFT) using the queries below:
SELECT
[First] = MIN(ExDate),
[Last] = MAX(ExDate),
[Diff] = DATEDIFF(DAY, MIN(ExDate), MAX(ExDate))
FROM (
SELECT TOP 2 Dividends.ExDate
FROM Dividends, Tickers
WHERE Dividends.symId=Tickers.symId
AND Tickers.Symbol='MSFT'
ORDER BY ExDate DESC
) AS X
Outputs the following result:
First
Last
Diff
2012-11-13
2013-02-19
98
But what I would like instead is to be able to output something like this:
Symbol
First
Last
Diff
MSFT
2012-11-13
2013-02-19
98
AAN
2012-11-13
2012-12-14
1
X
2012-11-13
2012-12-14
1
Can anyone please let me know what do I need to add on my query in order to achieve the desired output?
Any help would be greatly appreciated.
Thanks in advance.Could you try this?
create table Ticker (SymbolId int identity primary key, Symbol varchar(4))
insert into Ticker (Symbol) values ('MSFT'), ('ORCL'), ('GOOG')
create table Dividend (DividendId int identity, SymbolId int constraint FK_Dividend foreign key references Ticker(SymbolId), ExDate datetime, Amount decimal(18,4))
insert into Dividend (SymbolId, ExDate, Amount) values
(1, '2012-10-1', 10),
(1, '2012-10-3', 1),
(1, '2012-10-7', 7),
(1, '2012-10-12', 2),
(1, '2012-10-23', 8),
(1, '2012-10-30', 5),
(2, '2012-10-1', 10),
(2, '2012-10-6', 1),
(2, '2012-10-29', 7),
(3, '2012-10-1', 22),
(3, '2012-10-3', 21),
(3, '2012-10-7', 3),
(3, '2012-10-12', 9)
WITH cte
AS (SELECT t.Symbol,
d.ExDate,
d.Amount,
ROW_NUMBER()
OVER (
partition BY Symbol
ORDER BY ExDate DESC) AS rownum
FROM Ticker AS t
INNER JOIN Dividend AS d
ON t.SymbolId = d.SymbolId),
ctedate
AS (SELECT Symbol,
[1] AS maxdate,
[2] AS penultimatedate
FROM cte
PIVOT( MIN(ExDate)
FOR RowNum IN ([1],
[2]) ) AS pvtquery),
cteamount
AS (SELECT Symbol,
[1] AS maxdateamount,
[2] AS penultimatedateamount
FROM cte
PIVOT( MIN(Amount)
FOR RowNum IN ([1],
[2]) ) AS pvtquery)
SELECT d.Symbol,
MIN(MaxDate) AS maxdate,
MIN(penultimatedate) AS penultimatedate,
DATEDIFF(d, MIN(penultimatedate), MIN(MaxDate)) AS numberofdays,
MIN(MaxDateAmount) AS maxdateamount,
MIN(penultimatedateAmount) AS penultimatedateamount,
MIN(MaxDateAmount) - MIN(penultimatedateAmount) AS delta
FROM ctedate AS d
INNER JOIN cteamount AS a
ON d.Symbol = a.symbol
GROUP BY d.Symbol
ORDER BY d.Symbol
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers.
Thanks!
Aalam | Blog (http://aalamrangi.wordpress.com) -
Simple Maintaince and Expert mode.
Hi gurus,
I am currently on Om project.
1)I want to know difference between the Simple Maintaince and Expert mode.
2) Organisational and staffing screen is in which one simple or expert mode.
3) can u tell me how to make the structures by both methods and what transactions will be used.
4) what it means by expert mode edits the characterstics of objects and use infotypes how?
preetiHi Preethi,
Simple maintainence is an easy way to maintain the org structure.
An org structure can be created, maintained or displayed by any of the following methods.
Organization and Staffing , General Structures ,Expert mode or Simple maintainence.
T- Codes for
Organization and Staffing :
Create PPOCE , Change/Maintain : PPOME , Display PPOSE.
General Structures :
Create :PPSC , Change :PPSM , Display : PPSS
Expert mode :
PO10 : Org Unit
PO03 : Job
PO13 : Position
PO01 : Work Center
PFCT : Task Catalog
PP01 : General
Simple Maintainence :
Create : PPOC_OLD
Change : PPOM_OLD
Display : PPOS_OLD
In Org and Staffing and Simple maintainance You could create all the objects(S,P,O,C,K) from a single screen and maintain relationships between those objects.
In Expert Mode : Specific transactions are used to create diff object types .Here you could find the OM infotypes .
There is much more to say butto begin with you could use these transactions and explore .
Please feel free to ask any more questions.
Thanks,
Aastha -
Differences between the Portal Data Collector and the Activity Data Collect
Hello,
I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
Best Regards.
Pablo Mortera.All of my SQL Server instances are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database
I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
Wizard. Process Exit Code 5. The step failed.
Thanks
PAULqaz -
How i can change the arabic date and time mode to english date and time mode
how i can change the arabic date and time mode to english number mode
Settings app > General > International > Region format.
Maybe you are looking for
-
Oracle Identity Analytics (OIA 11g) Deployment failure in weblogic server
Hi, While deploying OIA 11g (which is integrating with OIM 11g) in weblogic application server 10.3.3.0, i am getting the following deployment error...could you please advise on this. Appreciate your help! An error occurred during activation of chang
-
ATI Mobility Radeon X (My)Adapta​tion video
HI! I have a Compaq NX8220 and os windows seven home premium. I can not find the video card driver. in support hp available drivers are coming in windows vista, I have downloaded and installed. but does not appear to be compatible at system restart o
-
Hello Guru's, I am new to SAP ISU , can any help me with BW integrations of SAP ISU. Like IS-U data model and standard industry processes, how BW is different in SAP ISU landscape. what are the function modules used for metering and billing module. A
-
I just had to install my third hard drive in this lemon of a computer. I'm running XP SP3 with all current updates. The bios and dvd drivers that were installed by Thinkvantage Productivity Center are newer than what are listed on the Lenovo updates
-
ITunes Music folder with my iTunes folder
I'm trying to organize my music and I have a problem: If I open my main music folder and then open my iTunes folder, I see many folders of all my assorted artists. Among those is another folder called "iTunes Music" that seems to duplicate all the sa