Difference between FRU 44C3928 and FRU 44C3931? Two DIMM

Hey All,
I'm trying to figure out what the difference is between FRU 44C3928 and FRU 44C3931. I recently bought a T61P (6458-5KU) off of Craigslist and unfortunately I have the dreaded 42W76W3 Planar. The gentlemen before me only had 1 DIMM populated so he never experienced the problem but unfortunately as soon as I upgraded to 4GB's and populated both DIMM's I did.
I haven't tried calling Lenovo for a replacement since the unit is out of warranty, I'm still willing to try though! However, to cover all my bases I've turned to eBay to find a new Planar, on eBay there are currently 44C3928's for about $200 while the 44C3931's are going for $350
I'm hoping someone here can tell what the difference is and if I buy the 44C3928 will I have any issues installing it into the case or booting into Windows.
Thanks in advance!

Hi Christopher1580,
Welcome to Lenovo Community!
As per the query we understood that you are looking for replacement of System board for your ThinkPad T430.
I am sorry to inform you that the FRU part number which you have provided is not showing the FRU list, you can check with the FRU link for ThinkPad T430.
I request you to provide the system MTM (Machine Type Model) number so that we can provide complete details on that.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

What is difference between TEXT mode and BINARY mode?

Hi,
          What is difference between TEXT mode and BINARY mode? In TEXT mode what is "ENCODING DEFAULT".
OPEN DATASET wl_filename FOR INPUT
                          IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET wl_filename FOR INPUT
                          IN BINARY MODE .

Hi vishnu,
1. files like .TXT files are considered to be text,
   and other files like .EXE . DOC etc are binary files.
2. In text files, after each line, there are two
   internal binary characters
one for line feed and another one for newline.
3. But, we don't have any meaning for it,
   when we view such files in notepad, for eg.
   Hence, to only get the understandable content,
   we should open such TXT files, in text mode.
(we can also open them in binary mode,
but we will get two extra characters after each line,
   and such two extra characters are meaningless
for interpreting the text)
4. In binary mode, each byte by byte is considered,
   without any meaning.
regards,
amit m.

What is difference between local variable and property node ?

What is difference between local variable and property node ?
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

To make things clear, here are two small examples that show how nasty locals and value properties can be to the naive programmer.
- Open the diagram of the race condition.vi before running it and try to predict what will be the values of the two counters after the third run.
- Use the Compare Locals Properties and Wires.vi to find out how slow locals and value properties can be (times 1000+).
This being demonstrated, I must add that I use globals and value properties quite often, because they are often very convenient
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Race condition.vi ‏9 KB
Compare Locals Properties and Wires.vi ‏18 KB

What is difference between enjoy transactions and Normal transactions

What is difference between enjoy transactions and Normal transactions
Ex:- ME22 & ME22N
What is difference between these two.

hi ,
the transaction code with 'N' are created with help of object concept.
In your case ME22 is obsolete one and ME22N is the tcode created with object concept.
pls Reward helpful points
Thanks
Siva

What is difference between table space and shchema

what is difference between table space and shchema ?

784633 wrote:
so each user has it own space of tables - schema ?yes, but let's clarify a bit ....
The "schema" is the collection of all objects owned by a particular user. So if user SCOTT creates two tables, EMP and DEPT, and a view EMP_RPT, and a procedure GET_MY_EMP, those objects (tables, views, procedures) collectively make up the SCOTT schema.
Those objects will be physically stored in a tablespace.
A tablespace is a named collection of data files. So tablespace USERS will be made up of one or more data files. A specific datafile can belong to one and only one tablespace. If a tablespace has more than one data file, oracle will manage those files as a collection invisible to the application - much like the OS or disk subsystem handles striping across multiple physical disks.
A specific object in the SCOTT schema can exist in only one tablespace, but not all objects of the schema have to be in the same tablespace. Likewise a tablespace can contain objects from multiple schemas.
and can one user to access tables of other users?As others have said - FRED can access tables belonging to SCOTT as long has SCOTT has granted that access to FRED.

Difference between primary key and primary index

Dear All,
Hi... .Could you pls tell me the difference between primary key and primary index.
Thanks...

Hi,
Primary Key : It is one which makes an entry of the field unique.No two distinct rows in a table can have the same value (or combination of values) in those columns.
Eg: first entry is 111, if you again enter value 111 , it doesnot allow 111 again. similarly for the strings or characters or numc etc. Remember that for char or numc or string 'NAME' is not equal to 'name'.
Primary Index: this is related to the performance .A database index is a data structure that improves the speed of operations in a table. Indices can be created using one or more columns, providing the basis for both rapid random lookups and efficient ordering of access to records. The disk space required to store the index is typically less than the storage of the table (since indices usually contain only the key-fields according to which the table is to be arranged, and excludes all the other details in the table), yielding the possibility to store indices into memory from tables that would not fit into it. In a relational database an index is a copy of part of a table. Some databases extend the power of indexing by allowing indices to be created on functions or expressions. For example, an index could be created on upper(last_name), which would only store the uppercase versions of the last_name field in the index.
In a database , we may have a large number of records. At the time of retrieving data from the database based on a condition , it is a burden to the db server. so whenever we create a primary key , a primary index is automatically created by the system.
If you want to maintain indices on other fields which are frequently used in where condition then you can create secondary indices.
Reward points if helpful.
Thanks,
Sirisha..

Difference between implicit enhancement and explicit enhancement

What is the difference between implicit enhancement and explicit enhancement .

Hi Peters,
Implicit enhancement option
Throughout the ABAP system, enhancement options are automatically available at certain pre-defined places. Some of the implicit options are:
u2022 At the end of all the programs (Includes, Reports, Function pool, Module pool, etc.), after the last statement
u2022 At the beginning and end of all FORM subroutines
u2022 At the end of all Function Modules
u2022 At the end of all visibility areas (public, protected and private) of local class
To view all the implicit options available in a source code, choose u2018Edit -> Enhancement Operations -> Show Implicit Enhancement Optionsu2019 from the editor.
Befor that you click on the spiral icon button in the application toolbar
Explicit enhancement option
The Implicit enhancement options are provided at specific source code places explicitly by SAP (Note that these enhancement definitions can also be created by partners and customers in their code).
There are two types of Explicit Enhancement options available. One which can be provided at a specific place - called Enhancement Point, and another which can be used to replace a set of statements u2013 called Enhancement Section. For this, we now have two new ABAP statements, viz.
u2022 ENHANCEMENT-POINT
u2022 ENHANCEMENT-SECTION
When the Enhancement-Section is implemented, only the implementation gets executed and the original code doesnu2019t get executed. This is a new technique, which didnu2019t exist previously in any of the old ways of enhancing, to exclude any standard SAP code from execution. Because of this, there can be only one active implementation of an Enhancement-Section. On the other hand, there can be multiple active implementations of an Enhancement-Point, in which case all the implementations will be executed with no guarantee in the order of execution.
For more information check the following link
[http://help.sap.com/saphelp_nw70/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm]
Thanks,
Surya

Difference between connection, session and process

Hi all,
Can anyone please update me on the difference between connection,session and process.
Thanks in advance,
- Sri

I got this useful note by googled in net. It describes session,connection,process gracefully.
A connection is a physical circuit between you and the database.A connection
might be one of many types -- most popular begin DEDICATED server and SHARED
server. Zero, one or more sessions may be established over a given connection
to the database as show above with sqlplus. A process will be used by a session
to execute statements. Sometimes there is a one to one relationship between
CONNECTION->SESSION->PROCESS (eg: a normal dedicated server connection).
Sometimes there is a one to many from connection to sessions (eg: like
autotrace, one connection, two sessions, one process). A process does not have
to be dedicated to a specific connection or session however, for example when
using shared server (MTS), your SESSION will grab a process from a pool of
processes in order to execute a statement. When the call is over, that process
is released back to the pool of processes.

Difference between Start Routine and End Routine in Transformations

Hi Friends,
I'm using BI 7.0... here in Transformations step we have two options..that is START ROUTINE... and END ROUTINE... What is the Difference between Start Routine and End Routine in Transformations..
When we go for Start Routine.. and when we go for End Routine..
Plz clarrify... points will be rearded..
thanks
babu

Hi,
One real time scenario for End Routine.
We have a scenario where in a datasource field is mapped to three infoobjects on the datatarget side. There are 2 key figures which need to get data after these these Infoobjects are filled. The best place for this to happen would be in a End Routine, where in we would loop through the results package and using the values of the infoobjects from the data target ( Cube in this case).
Hope this helps,
HD

Difference between 'materialized vews' and snapshots

Hello,
i have two questions:
what the difference between 'materialized vews' and snapshots? In fact, in create thoses Oracle Objects:
     create materialized view log on T1
     Create materialized view T1_MV
          Build immediate
          Refresh fast on commit
          As Select COL1,COL2 from T1
     Create snapshot T1_SNAPSHOT
     Build immediate
     Refresh fast on commit
     As Select COL1,COL2 from T1
and in find that T1_MV and T1_SNAPSHOT have the same caracteristics in dba_tables and DBA_SNAPSHOTS and DBA_MVIEWS.
seconde question: what's the difference between DBA_SNAPSHOTS
and DBA_MVIEWS tables?
I work under oracle 9i
thinks for response.

Backwards compatibility. Some apps might reference DBA_SNAPHOTS and it would be a PITA to change them. Eventually Oracle might decide that it's a greater PITA for them to keep those views and ditch 'em.
Cheers, APC

Technical difference between credit memo and invoice

Hi,
What is difference between transaction invoice and credit memo that are created in transaction FB60 and FB65.( is there any field that can exactly differentiate between these transaction types)
Regards
paveee.

Hi Praveen,
I think this is not related workflow question but i know the some difference fields in b/w these two.
Vendor Invoice (FB60)
Incoming Credit Memos (FB65)
Incoming Credit Memos:
As required fields:
· Transactn
· Bal.
· Vendor
· Document date
· Doc. type
· Posting date
· Reference
· Amount
· Currency
· Text
· Company code
Vendor Invoice
As required fields:
·         Transactn
·         Bal.
·         Vendor
·         Invoice date
·         Doc. type
·         Posting date
·         Reference
·         Amount
·         Currency
·         Text
·         Baseline date
·         Company Code
Thanks and Regards,
Prabhakar Dharmala

Difference between Free goods and BOM (ERLA)

Hi,
Could any body throw some light on the Difference between Free goods and BOM(ERLA) to clarify my weired thought.
AS of what i know is Free goods is 1:1 ratio.
The main item will be prices and sub item will be free .
Than same thing is also With BOM (ERLA)
Regards,
Venksys

Hi Venksys
Please note as given below :
Free Goods : This function allows you to offer your customers a product free of charge in the form of free goods when a certain quantity of products is ordered. Free goods is a kind of quantity discount, and is granted in the form of a goods delivery that is free of charge when a certain quantity is purchased. There are Two types of free goods :
1.Inclusive : The customer only pays for part of the goods ordered. The rest of the products are provided at no extra cost. For example, a customer orders for 3 bottels but pays for 2 bottels and 1 is supplied free .
2.Exclusive - The customer pays for the goods ordered, and also receives additional products for free. The materials delivered as free goods will not be the same as that of ordered onces. For examples customer orders 5 bottels , but will receive 1 Bottle opener free.
BOM : It consists of 2 or more items combined and sold as an package : Example : Combination of 1 Tooth paste + 1 tooth brush packed as BOM.
The Higher level Material ( BOM) is not relevant for pricing but relevant for picking : The tooth paste and brush is relevant for pricing and also can be sold independently : The Item cat group of the Header BOM material will be ERLA and for Tooth paste and brush material the Item category group will have TAN.
For more details , please refer to the link below:
http://www.sap-img.com/sap-sd/what-is-bom-referring-to-sap-sd.htm
Thanks and regards
Veera
Edited by: veera PV on Jan 24, 2011 9:06 AM

Differences between ANSI SQL and Oracle 8/9

Hallo,
i'm looking for good online texts or books concerning the problem "Differences between ANSI SQL and different database implementations (ORACLE, Informix, MySQL...)" I want to check a program written in C (with ESQL) that works with an Informix-DB. In this code i want to find code that is specific to the Informix-DB. I want to change the database, so all the code should be independent from a DB. Does anybody know texts or books concerning this problem?
thx
Marco Seum

Basically there is syntax difference between both of them.
Lets say i want to join two table EMP and DEPT based on DEPTNO.
With Oracle SQL format its like this.
select e.*
from emp e, dept d
where e.deptno = d.deptnoHere the joining condition goes in the WHERE clause.
With ANSI SQL format its like this.
select e.*
from emp e
join dept d
on e.deptno = d.deptnoHere the join condition is mentioned separately and not in WHERE clause.
Oracle supports ANSI SQL starting from 9i version.
You can read more about the syntax difference Here

Differences between Oracle BAM and Oracle BI and Question BAM Data Objects

Hi,
I have two questions.
1. Can someone tell me differences between Oracle BAM and Oracle BI?
My understanding about Oracle BAM is, we use BAM to build Dashboards or Reports.
We can also build DashBoards or reports using Oracle BI.
I am not able to understand why Oracle has two tools for same purpose?
Which tool is more powerful and user friendly(Oracle BI or Oracle BAM)?
2. Every time we plan to develop Dashboard or report in BAM, we need to create BAM ADC Data Object to store Data (i.e first step is to get data from external database or application and second step is to store data in BAM ADC data object).
My understanding is we have an extra step(i.e creating Data Object) in Oracle BAM to develop a report or DashBoard
I am wrong pl correct me?
Regards,
Shanti Nagulapalli.

Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
refer here,
http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
http://www.compuworks.com/events/view/233.pdf
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
Thanks

What's the difference between "controlfile autobackup" and "snapshot contro

Hi All,
What's the difference between "controlfile autobackup" and "snapshot controlfile" in RMAN configure ? Both are controlfile backups, what the difference between the controlfiles they backup ? Why there are two of these options ?
thanks

RMAN creates a control file snapshot to perform catalog resync operations. Control file autobackup will automatically create a backup of the control file whenever there are database structure changes.

Difference between FRU 44C3928 and FRU 44C3931? Two DIMM

Similar Messages

Maybe you are looking for