Difference between impelementation rules and business logc.

Hi all,
Please tell me what is the exact difference between implementation rules and business logic?And more importantly when and where they should be used?
Thanks in advance.
Regards,
Jayant Gupta

Hi vasu,
from the point of view of possible transformation there are not differences.
The great difference is the following:
In Update Rules routines are defined for a single field for every key filed: for example you define the single routine for 0AMOUNT for every single Characteristic that define the key (0COSTCENTER - 0COSTELEMENT - ...). For every single DataField you can define a different routine also in terms of Key fields.
In transfer roules every routine is for every field without any kind of relation to the other fields.
Check also this doc:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975</a>
Ciao.
Riccardo.
Message was edited by: Riccardo Venturini

Similar Messages

Difference between Session Facade and Business Delegate design patterns

Can someone tell me the differences between Session Facade and Business Delegate design patterns

1. Session Facade decouples client code from Entity beans introducing session bean as a middle layer while Business Delegate decouples client code from EJB layer ( Session beans).
2. SF reduces network overhead while BD reduces maintenance overhead.
3. In SF any change in Session bean would make client code change.
While in DB client is totally separate from Session bean because BD layer insulate client from Session beans(EJB layer).
3. In only SF scenario, Client coder has to know about EJB programming but BD pattern no EJB specialization needed.
4.SF emphasizes on separation of Verb, Noun scenario while BD emphasizes on separation of client(presentable) and EJB layer.
Anybody pls suggest more differences ?

Difference between Proxy pattern and Business Delegate pattern

Hi All,
Can any one please tell me what is the difference between Proxy pattern and Business Delegate pattern.
Thanks in advance.
Basak

The books they were first reported in, and the expressed intent, I guess. Arguably, the Business Delegate pattern is a special case Proxy, with more specific details about what resource is being proxied

Difference between Guided Procedures and Business Workflow?

Hi,
I'm new to workflows, so this question could be easy or absurd.
Is there a difference between Guided Procedures and Business Workflows? Or is this
the same thing with two names?
If it is different, when do I use which of them?
Could both use UWL?
Thanks a lot
greetz
chris

Workflow is a technology used to support business processes. You can make workflows without thinking/doing business processes. When you do business processes you will always wind up using workflow technology. All business process execution tools should by principle use a workflow engine at least SAP ones do. Not sure about others like Oracle BPEL tools for example.
SAP tools like GP and BPM/XI use either Netweaver Java or Abap workflow embedding the technical aspects of workflow design and runtime into the Netweaver stack simplifying the business user experience as it relates to designing and running business processes. But designing and running workflows using workflow tools directly still is very muc an IT challenge.

Difference between Session Facade and Business Delegate??

Hello,
I am currently working on design patterns and I am confused what the difference is between the Session Facade and Business Delegate pattern. They look identical.
What's the difference?
Balteo.

We implement Business Delegators (BD) as follows:
1. The client always talks to the BD.
2. The BD then talks to either our Session Facade, Session EJB, or Java Class, etc, etc directly.
This allows the client end code to never change whilst allowing our BD to swap between different providers of the service we require.
It's the good 'ole "layer of indirection" thingy.

What is the difference between sourcing rule and Bill of distribution

Hi All,
Can anybody explain me the difference between the Bill of distribution and sourcing rule. In what scenario a bill of distribution will be used.
thank in advance for your clarification.
thanks.
babu

Hi Babu
While these 2 entities overlap each other significantly and may be used as a replacement of other at times, there are still a few basic differences outlined below:
1. Sourcing Rules (SR) specify how an item (or group of items) are sourced for replenishment by an entity (say customer/ organization etc). Please note that its expressed in terms of receiving entity.
2. Bill of Distribution (BOD) specify how an item is supplied by an entity (say organization). This is expressed in terms of supplying entity
3. While BOD can only be assigned to internal organizations (could be CM or suppliers if modelled as an organization), Souricng Rule can be assigned to any type of entity including customers, suppliers, organizations and even regions & zones.
4. Typically usage of BOD vs. SR may be dependent on you supply chain structure. If a make organization is supplying to multiple distribution centers etc, BOD may help reduce data setup volume. Instead if a distribution center is sourcing from multiple organizations, SR may be a better choice.
5. If you're using regions & zones or customer locations to model how ATP/ ASCP selects a ship-from organization for Sales Orders, SR is only supported mechanism (unless these customers are modelled as organization)
6. For suppliers (not modelled as Org), SR is only option.
Hope this is helpful and please note BOD & SR aren't multually exclusive and can be used in combination at different levels of your supply chain.
Please let me know if I may help any further.
Thanks
Navneet Goel
http://www.inspirage.com
NOTE: I suppose same question was asked by you in another thread, not sure if you intended to update same thread or re-query for same question.

Difference between session facade and business delegate patterns

Hi,
How the session facade and business delegate patterns differ from each other, as both of them have similar and almost same forces to be addressed.
Please address.
Satya.

BTW, in J2EE Core patterns :
When the Business Delegate is udes with a Session Facade, typically there is a one-to-one relationship between the two. This one-to-one relationship exists because logic that might have been encapsulated in a Business Delegate relating to its interaction with multiple business services (creating a one-to-many relationship) will often be factored back into a Session Facade.[I/]

Difference between aggregation rule and column formula in edit formula

Anybody please help what is the use of aggregation rule and column formula in edit column option.
What is the difference if I apply sum in aggregation rule with apply sum(column name) in column formula.
When do I need use which one.
Thanks in advance

When you build a column in the rpd, you have the option of determining if the column should be aggregated in some way or not. For dimension columns, you wouldn't put aggregation. For say, an accoun ledger balance column, you might put the aggregation SUM or AVERAGE. Whatever aggregation you put on this column will be the "default" aggregation of the column in Answers.
So in Answerrs, if you use the Account Ledger Balance column and you only have Region as the dimension, OBIEE will aggregate or SUM the ledger balances so you have a SUM for the region level. If you had district, than the ledger balance column will aggregate to the district level. This is a convenient way to build reports without having to specify what the aggregation should be.
However, OBIEE gives you the ability to override what the default aggregation is for a particular column. This is the purpose of the drop down in the bottom left of a column when you click the fx button.
Say the default aggregation of ledger balance is SUM in the rpd, but for the report you are building, you want the average, you can apply the AVERAGE function in the fx window and it will overridge the SUM aggregation rule that was in the rpd.
Got it?

Difference betweeen Technical systems and Business systems

Hi
In a SLD we need to configure technical systems and Business systems.. what is the exact difference between Technical Systems and Business Systems..
this question is asked an interview.. for this.. how can we explain..
thanks
babu

Hi babu
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
Reward point if it help u understand

I need to know the difference between planned SKF and Actual SKF from business view and when I can use one of them ?

I need just to know the difference between plan SKF and Actual SKF in business example and when I use one of them.
thanks

Hi Salaam,
Statistical Key Figure (SKF) is a base to allocate the cost between cost centers. Usually, common cost centers cost should allocate to respective department cost centers on monthly basis.
Some of SKFs are: Calculating floor rent on SFT, Telephone charges on No. of units, and employees head count is with "Each" in SAP.
Apart from Ajay's reply, you can consider the Canteen exp in an organization. Assume Admin, Fin and Mfg departments are getting food services from Canteen. Here, total monthly cost of Canteen exp should be allocated to respective departments. Here, we use SKF as total head count of each department and distribute the cost.
Planned SKF is what you planned on the beginning of a period. (Assume head count was planned as 30 in the month beginning)
Actual SKF is what exactly you consumed over the period. (Actual employees provided canteen services during the month is 25)
BR, Srinivas Salpala

What is the Difference between Checking Rule B and RP

Hi Experts,
Can anybody Explain the Difference between Checking Rule B and RP
in Intercompany STO (between Company Codes) which one should i be use?
in standard settings of IDES system i found B assigned to PO Type NB. but somewhere in forum i saw checking rule RP to be assigned to NB. i totally confused. please help me.
In below Assignments which one is correct.........
NB (PO Type) - 1200 (Supplying Plant) - NLCC (Delivery Type) - B (Checking Rule)
NB (PO Type) - 1200 (Supplying Plant) - NLCC (Delivery Type) - RP (Checking Rule)
Thanks in Advance,
charysd
Edited by: charysd on Aug 2, 2011 12:32 PM

hi..
By default checking rule B is assigned to PO doc type...
In B...only delivery rule is considered..
while in RP..delivery time..lead time...transpotation time are added..
Hope it will help.
Thnks.

What are all difference between 11g Mediator and 10g Oracle service bus.

hi all ,
Apart from SCA concept , storing location
is thr any other difference between 11g Mediator and 10g Oracle service bus ?
thx in advance..

11g introduces the SCA architecture for building the service infrastructure.
SOA 11g uses:-
1. Uses the weblogic Server and BEA Aqualogic Service Bus (ALSB) for the Oracle Service Bus.
2. BPEL uses scalable DOM with reduced memory usage.
3. New adapters and leverage for Java 2 Connector Architecture (J2CA)
4. BAM finally ported from .Net to J2EE and is part of the service infrastructure
5. Oracle Web Services Management built into SOA 11g service infrastructure
6. New adapters and leverage for Java 2 Connector Architecture (J2CA). Tighter integration with E-Business Suite & large payload support.
7. Business Rules in SOA 10g business rules are managed using the Rules Author & in SOA 11g business rules are managed using JDeveloper and SOA composer

Difference between capacity formulae and scheduling formulae in workcenter

Hi experts please give me the solution for my queries
1. What are the capacity formulae and scheduling formulae in workcenter, give me examples, What is the difference between capacity formulae and scheduling formulae in workcenter , how these are used in workcenter.
2. what is group and group counter in routing , how these are used in routing , please explain.
3. what is the difference between PRTs created with MM01 AND CF01
4. what is alternative group and order catagery
5. what is system status , user status and authorisation matrix

>
hemamaheswararao wrote:
> Hi experts please give me the solution for my queries
> 1. What are the capacity formulae and scheduling formulae in workcenter, give me examples, What is the difference between capacity formulae and scheduling formulae in workcenter , how these are used in workcenter.
> 2. what is group and group counter in routing , how these are used in routing , please explain.
> 3. what is the difference between PRTs created with MM01 AND CF01
> 4. what is alternative group and order catagery
> 5. what is system status , user status and authorisation matrix
Dear Hemamashewararao,
Welcome to SDN !
As per rules you need to raise only one query as per one thread
Coming to your first query
As per business requirement formula will be defined
The most important difference between Capacity formula and scheduling formula
In SPRO
for scheduling formula tick mark will be marked for scheduling where as for capacity option tick mark will not ticked
For capacity formula tick mark will be marked for option capacity where as for scheduling option tick mark will not ticked
Currently i am not in front of SAP so i couldn't give you path
Good Luck !!!
Regards
Madhu

Difference between sap query and sap ad hoc query

Hello Experts-
Is there any difference between sap query and sap ad hoc query. If yes, I will appreciate if you can provide some input.
Thanks,

Hi,
SAP Query
Purpose
The SAP Query application is used to create reports not already contained in the default. It has been designed for users with little or no knowledge of the SAP programming language ABAP.
SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists.
Features
The SAP Query comprises five components: Queries, InfoSet Query, InfoSets, User Groups and Translation/Query.
Classic reporting- the creation of lists, statistics and ranked lists- are covered by the InfoSet Query and Queries components. Other components range of functions cover the maintenance of InfoSets, the administration of user groups and also the translation of texts created in the SAP Query.
All data required by a user for a report can be read from various tables.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. In the WYSIWYG mode, you can edit the lists using Drag & Drop and various toolbars.
AD Hoc Query
Definition
A Web item that enables you to create and change queries in a Web application on an ad-hoc basis.
Use
You can use the Ad-hoc Query Designer Web item in the Web Application Designer to structure Web applications in which you create or change queries. The Web item is as a tool for designing ad-hoc queries in a Web environment.
In particular it enables you to:
·        Create queries by assigning characteristics from an InfoProvider to rows, columns, filters, and free characteristics, and including key figures from the InfoProvider in the key figure structure of the query.
·        Restrict or filter key figures and characteristics
·        Use predefined key figure structures and restricted or calculated key figures in the query
·        Set or change query properties and key figure/characteristic properties in the query
·        Create or change conditions and exceptions
When compared with the BEx Query Designer, the Ad-hoc Query Designer Web item has the following restrictions when creating or changing queries:
·        You cannot integrate variables into the query directly.
However, you can use variables in reusable structures, or restricted or calculate key figures, which are used in the Ad-hoc Query Designer
·        The query can contain only one structure. This structure has to be the key figure structure and be in the rows or columns of the query.
-        You cannot use key figures or key figure structures in the filter.
-        You cannot define exception cells, since this requires two structures.
You cannot create the following objects using the Ad-hoc Query Designer Web item:
-         Reusable structures
-         Reusable restricted key figures
-         Reusable calculated key figures
-        Local calculated key figures
You can create local, restricted key figures using the Ad-hoc Query Designer Web item.
You can edit existing queries in the Ad-hoc Query Designer Web item, if the queries adhere to the restrictions laid out above The Ad-hoc Query Designer checks these requirements when loading a query. If the query is too complex, the query can be loaded into the Ad-hoc Query Designer but you cannot change it there. You then receive the appropriate message. You can still check and execute the query.
"Ad Hoc" is a Latin phrase which means "for this purpose" and in today's parlance generally means "on the fly," or "spontaneously."
An ad hoc query is a query that is run at the spur of the moment, and generally is never saved to run again. These queries are run using a SQL statement created by a tool or an administrator. So therefore, such a query is one that might suit a situation which is only there for the moment and later on will become irrelevant.
As queries become more complex, it can be difficult to write them correctly ad-hoc. To help with this, one can instead write the knowledge needed for queries as business rules in English, and then use a system called "Internet Business Logic" to automatically generate and run the SQL queries. One can then get explanations of the results, in English, at the business level.
Check these links....
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bf2f79-021d-2a10-5082-dadc79aaa92c
http://www50.sap.com/businessmaps/27FEEF3A12444F89A8524CCACAF4F5BF.htm
http://help.sap.com/saphelp_nw70/helpdata/en/15/00a042b443c56ae10000000a155106/content.htm
Reward points if useful....
Regards
AK

Wht is the difference between unicode program and non unicode program ?

Hi guru,
wht is the difference between unicode program and non unicode program ?
Regards
Subash

About brief idea about unicode
In the past, SAP developers used various codes to encode characters of different alphabets, for example, ASCII, EBCDI, or double-byte code pages.
ASCII (American Standard Code for Information Interchange) encodes each character using 1 byte = 8 bit. This makes it possible to represent a maximum of 28 = 256 characters to which the combinations 00000000, 11111111 are assigned. Common code pages are, for example, ISO88591 for West European or ISO88595 for Cyrillic fonts.
EBCDI (Extended Binary Coded Decimal Interchange) also uses 1 byte to encode each character, which again makes it possible to represent 256 characters. EBCDIC 0697/0500 is an old IBM format that is used on AS/400 machines for West European fonts, for example.
Double-byte code pages require 1 or 2 bytes for each character. This allows you to form 216 = 65536 combinations where usually only 10,000 - 15,000 characters are used. Double-byte code pages are, for example, SJIS for Japanese and BIG5 for traditional Chinese.
Using these character sets, you can account for each language relevant to the SAP System. However, problems occur if you want to merge texts from different incompatible character sets in a central system. Equally, exchanging data between systems with incompatible character sets can result in unprecedented situations.
One solution to this problem is to use a code comprising all characters used on earth. This code is called Unicode (ISO/IEC 10646) and consists of at least 16 bit = 2 bytes, alternatively of 32 bit = 4 bytes per character. Although the conversion effort for the R/3 kernel and applications is considerable, the migration to Unicode provides great benefits in the long run:
The Internet and consequently also mySAP.com are entirely based on Unicode, which thus is a basic requirement for international competitiveness.
Unicode allows all R/3 users to install a central R/3 System that covers all business processes worldwide.
Companies using different distributed systems frequently want to aggregate their worldwide corporate data. Without Unicode, they would be able to do this only to a limited degree.
With Unicode, you can use multiple languages simultaneously at a single frontend computer.
Unicode is required for cross-application data exchange without loss of data due to incompatible character sets. One way to present documents in the World Wide Web (www) is XML, for example.
ABAP programs must be modified wherever an explicit or implicit assumption is made with regard to the internal length of a character. As a result, a new level of abstraction is reached which makes it possible to run one and the same program both in conventional and in Unicode systems. In addition, if new characters are added to the Unicode character set, SAP can decide whether to represent these characters internally using 2 or 4 bytes.
A Unicode-enabled ABAP program (UP) is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system (NUS) as in a Unicode system (US). In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
In a US, you can only execute programs for which the Unicode flag is set. In future, the Unicode flag must be set for all SAP programs to enable them to run on a US. If the Unicode flag is set for a program, the syntax is checked and the program executed according to the rules described in this document, regardless of whether the system is a US or an NUS. From now on, the Unicode flag must be set for all new programs and classes that are created.
If the Unicode flag is not set, a program can only be executed in an NUS. The syntactical and semantic changes described below do not apply to such programs. However, you can use all language extensions that have been introduced in the process of the conversion to Unicode.
As a result of the modifications and restrictions associated with the Unicode flag, programs are executed in both Unicode and non-Unicode systems with the same semantics to a large degree. In rare cases, however, differences may occur. Programs that are designed to run on both systems therefore need to be tested on both platforms.
You can also check out these official SAP locations on the SAP Service Marketplace:
http://service.sap.com/unicode
http://service.sap.com/unicode@SAP
http://service.sap.com/i18n
Regards,
Santosh

Difference between impelementation rules and business logc.

Similar Messages

Maybe you are looking for