Difference between PDFmaker/distiller and print-to-PDF

When I create a PDF from within MS Word either through the File > Print menu, or through the Adobe PDF > Convert to Adobe PDF menu (i.e. PDFmaker?) I end up with subtly different results, despite using exactly the same joboptions file. Why is this?!
Samples are attached.
In the first pair, the text glyph placement differs.
In the second pair (see following), the dotted circle outlines are different. [Also the leftmost grey table border is claimed to be different, although I can't pick the difference by eye.]
(Adobe identifies the problems through Acrobat's Document > Compare Documents menu — set for detailed analysis of page-by-page visual differences — although for the character positioning it's a bit subjective, I think.)
Tip: you have to zoom in a lot to see these on screen.
Thesis_ExtraPages-PDF2—HRdEM.pdf
Thesis_ExtraPages-PDF2—HRpEM.pdf
p = printed to PDF
d = "distilled" (PDFMaker)

Hi Bill@VT,
you may well be correct in your comments, but I don't yet see the connection to my question. This could be partly due to my loose/incorrect use of the terminology.
To clarify:
* The two PDF file types were both created directly from within MS Word; one just printing, after setting Adobe PDF as the printer, and the other going through the extra Adobe menu (which would be equivalent to clicking the toolbar icon, I believe).
* I realise there are lots of settings relating to bookmarks, metadata, etc. that only apply to the second route above. My query is not about such differences.
* With regard to the settings that are common to both routes, I set them to be identical (in theory) by selecting the same joboptions profile/file.
* The differences I see and/or that Adobe Acrobat identifies are visual differences. (At least on screen.)
In fact, from your explanation that both of the above two routes use the Adobe PDF printer (and neither use the Distiller), I am even more puzzled as to how visual differences can arise.
—DIV

Similar Messages

Difference between the .ps2pdf and export as pdf

Dear All,
Find the below, if you known about this colomns plese fill this out and update here itself.
.ps2.pdf
export
Quark
Indesign
Quark
Indesign
resolution of photoshop files
transparency related
(CID) font
color management
layers
reduce page size
bookmarks
hyperlinks
Will see how many replies i get from you all.
PRithivi

PS Distill
Export
resolution of photoshop files
Can be downsampled *
Can be
downsampled *
transparency related
No
Depends on export setting
(CID) font
Yes * *
Yes * *
color management
Yes * * *
Yes * * *
layers
No
Yes
reduce page size
Yes
No
bookmarks
No
Yes
hyperlinks
No * * * *
Yes
* As long as the settings between the two methods are identical, you will not see a difference.
* * Factors such as application version, font and glyphs used have more influence on font encoding.
* * * Color management is possible through a ps distill method, however many other factors will cause the variance and difference in cm outcome.
* * * * Internal hyperlinks will not be retained, however URL hyperlinks can exist through default Acrobat settings.

Difference between execution mode of Print preview and Print for Output

Hello,
Can anybody tell the difference between execution mode of print preview and print for an output (For eg. PO output or Invoice)?. I am trying to download some documents linked to Purchase order to desktop. The code is written in the same driver program for printing PO and it is executed after smartform function module is called. It works fine in print preview mode and it fails in print mode. The reason why download fails in print mode is that GUI not available (just found from debugging).
Any ideas?
Thanks
Anil

HI
try using any other printer and find out if you are getting the correct output. The printer needs to support Multiple Unicode encoding schemes like UTF 8, UTF 16BE, and UTF 16LE, plus special characters and logos, bi-directional text layout, and custom characters..

What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?

Hello!!
What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
I found two things as follows.
1. MAC support
2. USB dongle
Is there anything else?

Now I’m clear!!
But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
They say for each as follows.
HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
The wrong description is “NOTE: You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
You can erase this line!!

List of differences between PSE 40 and PSE30

A lot of users are asking what are the differences between PSE 30 and PSE 40.
This Thread provides information on this subject. First, you will find information copied from the section "New Features" of the useful "Adobe Photoshop Elements 4.0 User Guide". Then later on, you might find additional information on the same subject provided by users of PSE.
--- Start of copy of information in the PSE 4.0 User Guide ----
1 What's new in PSE 4.0
1.1 Editing and selection
1.1.1 Magic Selection Brush tool
Easily and accurately select portions of your photos using this new tool in either Standard Edit and Quick Fix. Simply scribble or place dots on the object you want to select -no need to precisely outline the object- and Adobe Photoshop Elements selects the object for you. You can add to or subtract from the selection by using additional tools in the options bar. (See User Guide "To use the Magic Selection Brush tool" on page 193.)
1.1.2 Magic Extractor.
Easily select an object in a photo and extract it from its background. Just scribble or place dots on
the object you want to extract; then scribble or place dots on the background, and Photoshop Elements separates the object from its background. This tool is perfect for creating composites or scrapbook images. (See User Guide "To use the Magic Extractor" on page 194.)
1.1.3 Skin tone adjustment
Click an area of skin and watch the tonal balance of all colors in the photo improve. If you
want, you can also manually adjust the color by using color sliders. (See User Guide "To adjust the color of skin tone" on page 224.)
1.1.4 Red eye removal
Automatically remove red eye during import, or select one or more files and easily remove red eye
in either the Organizer or the Editor. (See User Guide "To remove red eye" on page 249.)
1.1.5 Defringe
Automatically remove the colored specs or halo around the edges of a selection. (See User Guide "To defringe a Selection" on page 200.)
1.1.6 Straighten tool
Straighten and crop crooked photos by drawing a horizontal or vertical line in the image. Photoshop
Elements aligns the photo to that line. (See User Guide "To straighten an image" on page 243.)
1.1.7 WYSIWYG font menu
What you see is what you get -see what each font looks like from within the font menu. (See
User Guide "To choose a font family and style" on page 332.)
1.2 Sharing and printing
1.2.1 One-click printing (US, Canada, Japan only)
Order prints and professional hardbound photo books directly from Photoshop Elements simply by dragging the items to the Order Prints palette. (See User Guide "To use the Order Prints palette (US, Canada, Japan only)" on page 401.)
1.2.2 Slide shows on TV
If you have Windows¨ XP Media Center 2005 installed, you can view your Photoshop Elements
slide shows on your TV and navigate using your TV remote control. (See User Guide "To output a slide show" on page 354.)
1.3 Tagging and organizing
1.3.1 Face tagging
Select a group of photos and let Photoshop Elements isolate and display all the faces so that you can
quickly tag them. The Find Faces dialog box displays thumbnails of each face until you tag it. (See User Guide "To automatically find faces for tagging" on page 101.)
1.3.2 Search by metadata
Search for a variety of metadata criteria, such as file name, file type, shutter speed, camera
model, date, and tags. You can search on multiple criteria at once. (See User Guide "To find photos by details (metadata)" on page 89.)
1.3.3 PDF support
Manage and tag PDF files in the Organizer. PDF files remain intact as one file that you can tag. Open
the PDF in the Editor to extract individual pages. (See User Guide "To open a PDF file" on page 148.)
--- Continuation in next Post of this Thread ----

--- Continuation from previous Post -----
2 What's changed in PSE 4.0
2.1 Editing and selecting
2.1.1 Crop tool
Freely change image size boundaries while cropping an image. When you're happy with your crop marks,
click the Commit button , which is now conveniently located at the bottom right corner of the crop border. (See User Guide "To crop an image" on page 240.)
2.1.2 Paragraph text
Create paragraph text by dragging a border with the Text tool. The text you enter inside the border
wraps to remain inside the boundaries. (See User Guide "To add text" on page 329.)
2.1.3 Quick Fix
Use the newly enhanced automatic correction options for the most common photo flaws. (See User Guide "To correct color in Quick Fix" on page 207.)
2.1.4 Easier color management
Easily get the color you expect when printing. N ew options and improved embedded
profile support streamline color management. (See User Guide "About color management" on page 236.)
2.1.5 Advanced camera raw
Fine tune exposure and lighting by working with the raw data from your digital camera, and
easily export photos to the universal DNG format. (See User Guide "About camera raw image files" on page 159.)
2.1.6 Artifact reduction
Quickly remove noise caused by shooting in low light or with ISO camera settings by using the
new Remove JPEG Artifacts option in the Noise filter. (See User Guide "Reduce Noise" on page 289.)
2.2 Sharing and printing
2.2.1 Multimedia slide shows
Create feature-rich slide shows with all the new tools and options available in the Slide Show
Editor:
a) Gracefully move from one image to another by adding interesting transitions between each slide. You can choose from over 50 transitions, such as dissolves and doors. (See User Guide "To add and edit transitions" on page 352.)
b) Add text and graphics with the click of a button. (See User Guide "To add text to a slide" on page 348 and "To add clip art graphics to a slide" on page 347.)
c) Make your slide show feel more like a video by panning and zooming your slides. For instance, you can pan from a face on the left side of an image to a face on the right side of the image. (See User Guide "To set pan and zoom" on page 350.)
d) Add background music, make the duration of your slides match the duration of your audio, and narrate your slides all with the click of a button. (See User Guide "To add music to a slide show" on page 347 and "To add narration to a slide" on page 350.)
e) Quickly reorder or edit your slides without leaving the Slide Show Editor. (See User Guide "To reorder slides" on page 346.)
f) Preview anytime by clicking the Preview button, and then output your slide show by burning a DVD (if you have Adobe ' Premiere' Elements installed), sending it in e-mail, sharing it online, or sending it to your TV. (See User Guide "To output a slide show" on page 354.)
2.2.2 Photo mail
Turn plain e-mail into theme-based Photo Mail with enhanced and easier to use captions. (See User Guide "To send a photo using Photo Mail" on page 407.)
2.2.3 Desktop wallpaper
Create original desktop wallpaper using multiple photos. (See User Guide "To use photos as desktop
Wallpaper" on page 367.)
2.2.4 Creations
Create your own cards, calendars, and photo albums, and then print them on your printer, upload them
to the web, or burn them to CD. (See User Guide "About creations" on page 343.)
2.3 Viewing, tagging, and organizing
2.3.1 Faster download
Use the enhanced Photo Downloader to quickly download photos from your digital camera and
mobile phone, even when Photoshop Elements is not running. (See User Guide "To get photos from a digital camera or card reader" on page 62.)
2.3.2 Full Screen and Side By Side View
View your photos in full screen without the clutter of command menus and tools.
(See User Guide "Viewing photos at full screen or side-by-side" on page 76.)
2.3.3 Automatic organization and view options
View your photos as arranged automatically by date, or use the intuitive
Date View or the enhanced Folder Location view. (See User Guide "To sort files in the Photo Browser" on page 71.)
2.3.4 Address book
Import your addresses from Microsoft Outlook address book or vCards. (See User Guide "Using the contact Book" on page 404.)
2.3.5 Captions
Add captions to multiple photos at once. Open and edit audio captions by simply clicking the Audio
icon in thumbnail view in the Photo Browser. (See User Guide "To add captions to files" on page 123 and "To add audio to a photo" on page 124.)
--- End of Information Copied from the Adobe PSE 4.0 User Guide

Difference between Smart Forms and Adobe Form

Hi all,
What are disadvantages of Smart form in SAP ,
What is difference between Smart Forms and Adobe interactive Form.
I heard from someone that in future Adobe interactive Form will repalce smart forms. Is it true or not
Best Regards
Srikanth

Hi,
Companies depend on formal documents that reflect their corporate identities and contain critical business information from live systems. SAP and Adobe partnered for automating and streamlining forms-based communication to support customers who create reusable forms for their business processes.
SAP Interactive Forms by Adobe will be used more and more as a way of simplifying and automating manual processes.
There are various advantages of Adobe forms.
SAP Interactive Forms by Adobe provides all the features and functions you need to create form-based output, such as order confirmations, invoices, or pay slips. You can either print such documents or send them by email or FAX.
Online Interactive Forms
A user logs on to the company intranet to fill in a form required by the HR department (for example, a Non-Disclosure Agreement to be signed by a new employee). The form is displayed in the browser.
As the user is logged on in the background to the company's HR system, his master data is displayed in the form. The user enters the required information in the fillable fields of the interactive form, and sends the data back to the system by pushing a button. The system extracts the data from the form and saves it in the database.
Offline Interactive Forms
The purchasing department of a company creates a bid in its Enterprise Resource Planning (ERP) system and selects the potential vendors. Based upon this data, the system automatically creates interactive bidding forms with specific vendor information, such as the address or contact person.
The forms are transmitted to the vendors by email. The vendors can fill out the forms offline (without being connected to the system that created the forms) and transmit them back to the company. The company then processes the forms automatically, and the data provided by the vendors is written to the ERP system. The purchasing department uses the data to evaluate the quotation and then issues an order.
With the integration of Adobe PDF technology into its solutions, SAP will be able to further extend its offerings of end-to-end business solutions by:
Providing for the first time the capabilities of Adobe's interactive PDF-based forms.
Integrating PDF documents into business processes that are driven by SAP applications.
Automating the process of moving XML data from SAP applications into interactive forms and vice versa.
Reducing time to design, manage, and maintain extended forms-based processes through easy-to-use forms design and deployment tools.
Offering its customers enhanced printing capabilities, in particular for interactive Web applications.
The focus of new forms technology from SAP is interactive PDF-based forms that can be created in SAP systems as a result of the integration of Adobe technology with Web Dynpro and the SAP NetWeaver Developer Studio. This integration means that adobe is the future technology.
Regards,
Kate

Tints and CYMK - Whats the difference for screen display and print

Hi,
What is the 'technical' difference between a tint and CYMK? For example, if i create a box with a fill of C:0 Y:0 M:0 K:40 is this the same as a black fill with 40% tint?
Knowing that all screens and printers give different results, is the difference even noticeable? What about 'best practice' / 'industry standard'?
Workflow/context- I create artwork (documents with combinations of images, graphics and text) in either Ai or ID which all go to PDF and I present them either on screen or through print (regular printer - none of my printed artwork use printing plates).
Thanks for your advice in advance.

A tint is just a lighter version of your swatch, so yes, 0,0,0,40 CMYK is exactly the same as using the [Black] swatch and setting the tint field in the panel down to 40% or creating a tint swatch with a 40% value.
Not all colors are CMYK. On screen you use RGB and most desktop printers expect RGB data as well. On press you might use spot color inks if you have only one color and tints of that color to add, or you need some color that can't be easily produced in CMYK in a full-color job. You probably shold not be using spot color in your work since you don't go to press and printer simulations of many spot colors are quite bad. You'll find the really saturated colors tend to be out of range for most printers, too, if you use RGB, but if you can accept that your printed output may not match the screen (and unless everything in the workflow is calibrated, including ALL the monitors you might be working with and all the printers you might use for output, output on remote devices probably won't match what you see on your own monitor and printer), I would design for the screen if that's the primary presentation and let those out-of-gamut colors geet clipped in print.
Printing tints is a little trickier than you might think. Dot gain (how ink spreads as it is absorbed into paper) tends to make tints seem a little darker in print.

Technical difference between ECC5.0 and ECC6.0

Hi everyone,
Can anybody tell me whats is the Technical difference between ECC5.0 and ECC6.0.
I am doing upgrade from ECC5.0 to ECC6.0 in Retail.
Regards,
Divya

Dear Divya,
When it is a technical upgrade from a lower version to ECC6.0, many objects like includes, Function modules, reports, OSS notes, DDIC objects, BDC/Print programs, SAP scripts, screens will get affected due to the upgradation. So we need to check with all these objects.
u2022 We will encounter short dumps while executing certain programs. This may be due to the usage of obsolete function modules or Unicode errors.
u2022 The BDCs in the upgraded version will become defective as many of its screen field names will be changed during version change.
u2022 Program texts of many programs will be lost. They have to be restored.
u2022 In case of tables, enhancement category has to be provided.
u2022 There is a possibility of losing the variants during upgradation. So care should be taken to retain them before upgradation.
u2022 ECC6.0 is case sensitive, so many of the interface programs will fail to transfer (FTP) files between systems. These objects have to be changed so that the commands passed to the external system be UPPERCASE.
So a developer should be aware of the following:
u2022Unicode programming is followed in ECC6.0. So we need to be aware of it to rectify certain Unicode errors which are likely to occur.
u2022You have to run the transactions SPAU & SPDD to check for list of standard & custom objects that needs modification in the upgraded version.
Check the below link to find more details on usage of SPAU & SPDD transactions
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
u2022Should be aware of the objects that have become obsolete in ECC6.0. They have to be replaced by appropriate ones.For eg.:
--> The WS_* function modules have been replaced by GUI_* FMs in ECC6.0 as WS_* FMs have become obsolete from 4.7
-->Tables like TVARV & TTREX have been replaced by TVARVC & TTREXN respectively in ECC6.0.
u2022In case of tables, we need to specify the Enhancement category.
u2022Due to upgradation, we will lose out some variants. So we should take a back-up before proceeding with the upgradation.
u2022In case of BDC programs, some field names will be changed. So they have to be named appropriately.
Please check with the below links for more details:
SAP Upgrade guide:
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
From ABAP's perspective, the following link helps you:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
For technical upgrade inputs:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
Hope this helps you.
Regards,
Rakesh

What is difference between bex analyser and bex browser

what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
·        BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
·        Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
·        Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
·        Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna

WHAT IS DIFFERENCE BETWEEN FIRMWARE CKP5CN1334ER AND VersionCLP1CN1322CR,

WHAT IS DIFFERENCE BETWEEN FIRMWARE CKP5CN1334ER AND VersionCLP1CN1322CR, i GET A MESSAGE WHEN I TRY TO SCAN AN EMAIL THAT I NEED TO MANUALLY CHECK BY FIRMWARE

Hi sawmill1,
Welcome to the HP Support Forums. I see that you are getting a message to update the firmware of your printer to allow you to use scan to email.
To better assist you, would you please provide some further information:
What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system are you using on your computer? whatsmyos.com
Are you getting any other error messages? If yes, what does it say and where is it displayed (printer or computer)?
Have you tried to update the firmware of the printer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Difference between SQL Explain and SP Explain

What is the difference between SQL Explain and SP Explain? And why would they suggest a different index is being used for the same statement in the same trace?

Hi,
Go through the link,
http://www.redbooks.ibm.com/redbooks/pdfs/sg247094.pdf#search=%22SQL%20Explain%20and%20SP%20Explain%20in%20SAP%22
Regards,
Azaz.

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

Differences between oracle 10gr2 and 11gr2 warehouse bulider

Hi All,
Could you please let me know the main differences between Oracle 10gr2 and Oracle 11gR2 warehouse builder.
Also , it would be great if anyone point me to the document where i can see the major differences.
Thanks,
Naveen.

Hi Naveen,
The major difference between OWB10gR2 and 11gR2 is the target RDBMS.
In 10gR2 you have to use ORACLE as your target RDBMS (unless you are going for DB Gateways, that is a complete different story).
Where as in 11gR2 allows you to use any RDBMS as your target system . This is achieved by Code-Template mapping.
All is needed is that proper jdbc driver for the target system.
Also 11gR2 supports OBIEE RPD creation and etc.
http://blogs.oracle.com/warehousebuilder/2009/09/oracle_warehouse_builder_11gr2.html
http://www.rittmanmead.com/2009/09/a-look-at-the-new-features-in-owb11gr2/
http://www.oracle.com/technetwork/developer-tools/warehouse/owb-11gr2-new-features-summary-129693.pdf
Thanks,
Sutirtha

Differences between Oracle BAM and Oracle BI and Question BAM Data Objects

Hi,
I have two questions.
1. Can someone tell me differences between Oracle BAM and Oracle BI?
My understanding about Oracle BAM is, we use BAM to build Dashboards or Reports.
We can also build DashBoards or reports using Oracle BI.
I am not able to understand why Oracle has two tools for same purpose?
Which tool is more powerful and user friendly(Oracle BI or Oracle BAM)?
2. Every time we plan to develop Dashboard or report in BAM, we need to create BAM ADC Data Object to store Data (i.e first step is to get data from external database or application and second step is to store data in BAM ADC data object).
My understanding is we have an extra step(i.e creating Data Object) in Oracle BAM to develop a report or DashBoard
I am wrong pl correct me?
Regards,
Shanti Nagulapalli.

Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
refer here,
http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
http://www.compuworks.com/events/view/233.pdf
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
Thanks

Difference between Drilldown report and Interactive report

There is no difference between drill down and interactive report, they are the same.
With drilldown reporting, SAP provides you with an interactive information system to let you evaluate the data collected in your application. This information system is capable of analyzing all the data according to any of the characteristics that describe the data. You can also use any key figures you wish to categorize your data. You can display a number of objects for a given key figure, or a number of key figures for a given object. In addition, the system lets you carry out any number of variance analyses (such as plan/actual comparisons, fiscal year comparisons, comparisons of different objects, and so on).
You can produce both simple, data-directed lists (basic reports) and complex, formatted lists in drilldown reporting (form reports).
Drilldown report provides you with comfortable functions for navigating through your data. For example, you can jump to the next level of detail or the next report object on the same level, hide individual levels and switch between the detail and drilldown lists. It also provides a number of additional functions which let you process lists interactively (sorting, conditions, ranking lists, and so on). SAP Graphics, SAPmail and the Excel List Viewer are also integrated into drilldown reporting.
The drilldown functions are divided into three groups which differ in the number of functions available. That way each user can choose the functional level most suited for his requirements.
In addition to the online functions for displaying reports, drilldown reporting also provides functions which let you print reports. A number of formatting functions are available to let you determine the look of your printed reports (page breaks, headers and footers, underscores, and so on).
The menus and the functions available directly on the drilldown report make it easy to use the information system.
What is an Interactive Report?
An interactive report generally works in the following fashion:
1. Basic list is displayed.
2. User double clicks on any valid line
    or
    User selects a line and presses as button on the tool bar.
3. The corresponding event is triggered
4. Then in the code, the line on which action was done, is read.
5. Depending on the values in that selected line, a secondary list is displayed.
6. Steps from 2-5 are repeated till the end.
From the above explanation, I believe, its clear that, the 20th list, will essentially depend on the "selected line" of 19th list. According to your question, you want to move to 20th list directly, without "a prior list". May I know the exact requirement so that, an appropriate solution can be suggested?
Again, your question was, how to move to 20th list directly on pressing of execute button. Its not possible to move to 20th list. You must cross over a basic list, before you can go to a different list level, using the code given by Pavan.
What are Drilldown reports?
The lines of basic list of a drilldown report when clicked, will take the user to the corresponding (standard) object's display.
For eg: Suppose your report's primary component is purchase requisition, (assume you are printing PR details), and the basic list displays details of many PRs.
Eg: when clicked on a particular line of the PR basic list, it takes you to std t-code me53 (display of purchase requisition). This is the 'Drill-down' functionality.
For this, in the at-line selection of your program, as per the above ex: you'll set the parameter ID of PR number BAN (that you can get from Data element) in memory (using set parameter id) and then calling the corresponding transaction (usually skipping initial screen of the std t-code).
Likewise, if it's Material Number (Matnr), you'll be displaying MM03 transaction w.r.t. the line's matnr.
AKSHAT..........

Good, information. But I think you should post these items in Wiki, in place of forum, as here we have Qns & Ans; problems and solutions.
https://www.sdn.sap.com/irj/sdn/wiki
[ABAP Development > ABAP General ]
Wiki is the right place for such knowledge base
Thanks!!
Regards,
Vishal.

Difference between PDFmaker/distiller and print-to-PDF

Similar Messages

Maybe you are looking for