Difference between PO created with reference and without reference(CIN)

Dear Experts,
I am working on CIN. I had created a PO(PO # A) and it perfectly captured an Excise invoice(J1IEX_C). I tried to create another PO(PO # B) with same details like Material, Plant, Vendor, everything else remains same, but this time I was not able to capture excise invoice. Under J1IEX_C I am getting an error "Excise Details are not maintanied for Vendor 20033525. Message no. 8I565"
I again created new PO(PO #C) with reference to PO # A(copy) and for this PO I could capture Excise invoice for PO # C.
I am confused why is this happening, as my vendor is same in all the cases.
Thanks and Regards,
Manish

Hello
Genrally it should not happend like that. check the vendor details in j1id ? make sure give all details means each and every field.
your using ecc6 and updated new support pack then you have to fill all the coloums in ji1d vendor detials.
so your taking the ref of old po system not asking the details.
laxman

Similar Messages

  • What is the difference between sales order with picking and without picking

    hi friends,
    i would like to know what is the difference between sales order with picking and without picking.
    thanks
    skrishnan

    Hello,
    Picking refers to preparing the right quantity and quality of goods for shipping on schedule as required by the customer.
    Once picking is configured, SAP Sd automatically generates picking lists and picking labels which can be tagged to the relevant goods. SAP can be configured to ensure that picked quantity is confirmed before goods are issued. This can be done using transaction code VSTK. In T-code VSTK, picking confirmations can be set, which ensure that goods picked for delivery are in accordance with picking slips.
    Picking thus helps in monitoring each item using the picking status. Picking is normally done in SAP SD by a shipping clerk.
    Prase

  • Difference between PR Relase with classification and Without classification

    Hi,
    Can any one tell me what is the difference between PR release  with and without classification
    Thanks
    Akkshaya

    For PR with release strategy without classification only item level release is possible. But for PR with release strategwithat classification overall release is possible.
    Below links will give you the complete details
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
    Both cannot be used together. Only one at a time can be used
    Regards,
    Ashwin

  • Differences between client copy with sap_all and database copy

    What's the difference between client copy with sap_all and doing a database copy.
    I know if I do a database copy from Production to our Quality system.
    I need to install the license key
    restore the production library to the quality library
    Initialize TMS and so on.
    I know if I want to copy to our Development system. I would need to run either a remote client copy or and export/import since I cannot do a database copy because I would loose all my other clients in Development.
    My question is, if the quality systems and the production systems are on the same support packs, same kernel.
    What does a database copy give you (besides being faser) that a remote client copy or export/import of a client copy does.
    Any differences
    Thanks
    Joe

    Hello Joe,
    If there is inconsistent Z tables between QAS and PRD, remote client copy could fail, especially when the table on PRD has longer length or more fields than the one on QAS.
    Also the source client should has no-activity during the client copy, otherwise the application data could be inconsistent. For example, some material documents are copied, but not the corresponding financial documents. (For PRD client, it could be hours between the times those tables are copied.) For database restore, it is rarely an issue.
    Best regards,
    Victor

  • Difference between Crystal Report with VS2010 and Crystal Report Professional Version

    Dear Experts,
    We want to know the difference between Crystal Report Version with VS 2010 and Crystal Report Profesional Version.
    And from where we should buy it provide the link.
    Thanking you,
    Miral Shah

    If you are looking for difference in features, see this.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60df293e-41e8-2e10-9293-fa4beeb40a99?QuickLink=index&overridelayout=true&52772263221521
    You could design your report with any one of CR 2008/2011/2013 and still could use in the app with 13 version references.
    Here is the licensing info. http://scn.sap.com/docs/DOC-21575
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • What is the difference between an ipad with cellular and one without?

    Anyone?

    iPad with cellular will allow you to connect to the internet and email anywhere you have a cell phone signal. You can also connect to a wi-fi network.
    iPad with wifi will allow you to connect to the internet when you are within range of a wifi network.
    So if you are outside in the middle of a park, you won't be able to connect to the internet or email with the wifi only model, but you could with the cellular model. If you are at a Starbucks, you could connect to the internet or email with either model.
    Hope this helps!
    ~Joe

  • What's the difference between graphics processor with 256MB and 512MB

    I'm doubting between buying the more expensive or the cheaper Macbook Pro model.
    Does someone knows the limitations I will have with the 256MB model? It is worthy to pay u$500 for the 512MB model?
    Is there any other big difference (besides the RAM size) between the 2 models that could make me decide for one or the other?
    thanks a lot for your help!

    Andresb... the $500 gets you more than just 256MB texture memory. You'll also get a slightly faster CPU with more cache, double the installed memory, and an 80gb larger hard drive.
    But sticking to your question, what does the extra video memory do? It's used by graphics intensive applications for rendering and textures, etc. I don't know of any programs that will not run if you have less than 512MB, they just won't run quite as fast.
    While you can add more memory or replace the hard drive with a bigger one at a later date, you can not increase the CPU speed, add more CPU cache, or upgrade the video memory on the machine. For a lot of people, that won't be a big deal - the question really is how much of a power user do you really think you are?
    Good luck with your decision!

  • Difference  between jar created using NWDS and 'java cfm'

    Hi,
    I have exported a jar file of a java application from NWDS. My question is how different it is from the jar that is been created using java cfm command ?
    Thanks,
    RPN

    Hi,
    No difference
    Regards
    Ayyapparaj

  • The difference between the upgrades with and without MO?

    I did many upgrades without maintenance optimizer.
    But I did not use maintenance optimizer so far.
    Could you summarize the differences between the upgrades with and without MO?
    Thanks!

    The upgrade is the same, procedure is the same, glitches are the same, tools are the same. The only difference is, that you MUST use maintenance optimizer to confirm the supportpackages in your download basked before you're able to download them.
    Nothing else is changing
    Markus

  • Create delivery without reference and without movement

    Dear All,
    I have a requirement to create an outbound delivery without reference (the easy bit) but also without movement for normal "FERT" stock items.
    The reason for the requirement is we have a production planning plant set up and the receiving plant is s short distance from the manufacturing plant. The transport between locations involves public roads and the products being shipped can contain hazardous materials.
    The thought is to create a delivery without reference assign the materials and pack within the delivery, the problem is that as the movement has already taken place this delivery line item must not be relevant for movement.
    I have tried assigning text and non stock item categories without success so I am hoping someone out there can give me some pointers on possible solutions
    Many Thanks
    Brian

    In case I have understod u correctly then u need to create a OBD with material with stock but no goods movement shoudl happen
    can u create a new item category which is not relevant to picking and no sloc is requried and when u create the delivery then system will mark it as complete even w/o PGI.
    tcode 0VLP

  • Counter KF with 1 & 0 and difference between data type NUMBER (DEC) and INTEGER (INT4)

    Hi,
    I need to create a counter kf which should populate 1 and 0 to this counter field. Please let me know is there any difference between data type
    NUMBER (DEC) and INTEGER (INT4).
    Please suggest.
    Thanks & Regards,
    Pavan kumar

    Hi Pavan,
    The basic difference between Number(DEC) and INT4 is its internal storage in system.
    For Number (DEC) - Value internally stored as packed number with 3 decimal places whereas INT 4 as 4 byte integer without decimal places.
    For counter KF, you can go for INT 4.
    Hope this helps.
    Thanks

  • What is the difference between the 4th generation ipad and the ipad 3 with retnia display?

    What is the difference between the 4th generation iPad and the "New iPad with retina display"? i don't quite understand. are they stilll the same size or would i have to get a different case?

    The 3rd and 4th generation iPads are the same size. The 4 has a faster processor, and a little better iSight camera for FaceTime. The 4 also has the lightning connector so your old cable will not work with the iPad 4.
    You should always check with the manufacturer of the case to see if it will fit. You can probably do that on the manufacturers website.
    This might be of some interest to you.
    http://www.zdnet.com/ipad-4-teardown-pretty-much-the-same-as-the-ipad-3-70000068 33/

  • What is the difference between Ipad Air with code MD787B/A and MD787FD/A??

    Hi - what is the difference between Ipad Air with the code MD787B/A and MD787FD/A ??

    You can see the model number in Settings>General>About>Model. The model number has a two-letter code, a number and some more letters. The last part stands for the country/region. The first letter can be "F" (refurbished), "M" (normal retail), or "P" (personalized / engraved). For example MC605B is the model MC605 and B is for the region.
    What country does my device belong to?
    http://www.jbfaq.com/article.asp?id=63
     Cheers, Tom

  • Is there a big difference between Intel Iris Pro graphics and the NVIDIA GeForce GT 750M graphics processor with 1GB of GDDR5 memory

    Is there a big difference between Intel Iris Pro graphics and the NVIDIA GeForce GT 750M graphics processor with 1GB of GDDR5 memory, is it worth paying an extra $200?

    Software support of graphics card is key.   If no graphics card is mentioned in software specs, then it can be ignored.  Mostly games and high end image and video graphics software are affected.

  • What is the difference between version 4.7 EE and ECC 6.0 in SD module.

    Hi SAP Gurus,
    what are the features in 4.7 EE version in general.
    what are the features in ECC 6.0  version in general.
    then give me the exact difference between version 4.7 EE and ECC 6.0 in SD module.
    if u give the information, then u will get the rewards.
    Regards,
    somu.

    Hi Somu,
             These are additional enhancements avialble in ECC6.0 other than that remaining same as 4.7E
    1.E-Commerce:- SAP ERP provides powerful e-commerce capabilities that can be expanded in an easy, cost-effective manner in line with business growth. Organizations can run a complete sales process on the Internet, and provide business-to-business (B2B) and business-to-consumer (B2C) customers with personalized and interactive online self-services.
    2.Mobile Sales for Handhelds:-SAP ERP enables sales professionals to access front- and back-office business processes and to manage critical sales activities in the field using standard PDAs or other handheld devices (including those with bar code scanners). In this area, SAP ERP provides the following functions:- Customer managementWith SAP ERP, sales professionals may enter, view, and modify detailed customer information, and view sales order history for each customer.- Sales order managementSAP ERP enables sales staff to take sales orders via bar code scanners; search, create, and modify sales orders; and list or sort sales order partners.- Material managementSupport for material management for mobile sales enables staff to view material lists or details for a specific material, search material, and display customer-specific prices.
    3.Resource-Related Down Payments and Billing:-- Supports creation of down-payment requests analogous to the functions offered by resource-related billing- Enables organizations to bill the requesting company code for services provided via a resource-related billing document.
    4.SAP Beverage Functions Available for the Consumer Products Industry:- As of SAP ERP Central Component (SAP ECC) 5.00, the following functions from the SAP beverage industry solution are available for the consumer products industry:* SAP ECC 5.00, consumer products (EA-CP 500)- Material sorting- Extra charge- Empties management- Part load lift orders- Pendulum list indirect sales- Sales returns- Excise duty* SAP ECC 5.00, supply chain management extension (EA-SCM 500)- Direct store delivery back-end- Master data- Visit control- Transportation planning (including loading units, aggregation categories)- Vehicle space optimization- Output control (including valuated delivery note)- Route accounting (including tour data entry, cash payer, route settlement)* SAP ECC 5.00, industry-specific sales enhancements (EA-ISSE 500)- Extended rebate processing.
    5.Credit Management:-Integrating sales and distribution (SD) credit management with SAP Credit Management application:With SAP ERP 6.0 application, you can also use SAP Credit Management in SAP Financial Supply Chain Management set of applications (FIN-FSCM-CR) to perform all credit checks and commitment updates for all areas of sales (SD-BF-CM). In SAP Credit Management, you can update the data from multiple systems. This enables you to execute credit checks with consistent data in distributed systems, too. Furthermore, you can connect to external credit information providers by extensible markup language (XML) interfaces. Alternatively, you can continue to use SD Credit Management (SD-BF-CM).
    6.E-Commerce: Catalog Management :-As of SAP ERP 6.0 application, you must carry out product catalog replication from your ERP solution to the Text Retrieval and Information Extraction (TREX) server for use in the Web shop, using the report ISA_CATALOG_REPLICATION.
    7.E-Commerce: Quotation and Order Management:- Order creation with reference to a contract that has been displayed* Lock of sales documents to avoid concurrent access during the order change process* Display of bills of material in the shopping basket* Free goods processing* Processing of grid products for the SAP Apparel and Footwear application* One-step business order processing* Selection of multiple transaction types in the shopping basket* Credit card support in business-to-business (B2B) Web shop* Material number format conversion* Maintenance of delivery priority in the shopping basket (B2B)* Document search for all documents across all sales areas* Interprocess communication-characteristic value display in basket and order confirmation
    8.E-Commerce: Selling Over eBay:-Creation and management of product listings on eBay leverages the e-commerce order management and fulfillment capabilities of the SAP ERP application by easily tying existing tax, pricing, shipping, and payment configurations to post-auction processing. Enhancements in 2005: * You can use the business-to-consumer (B2C) checkout instead of the eBay checkout. With the B2C checkout, you can maximize cross-selling and up-selling opportunities by leveraging B2C functionality, determine tax and shipping using the elaborate methodologies available through condition techniques in SAP ERP 6.0. * E-mail notification scenario: winner notification to keep the auction winner updated with the status of the auction and of his or her order * Monitoring through features such as single-activity trace (SAT), heartbeat, and logging * Creation and publishing of multiple-item auctions and manual retraction of winners
    9.E-Commerce: User Management:-- Web-based user management for business-to-business internet users - Assignment of authorization roles to users in web-based user management - Automatic migration of SU05 to SU01 internet users
    10.Enterprise Services in Sales Order Management:-Please check in the Enterprise Services Workplace site which enterprise services are available for sales order management on the SAP Developer Network site (www.sdn.sap.com).
    11.Internet Pricing and Configurator (IPC):-The IPC is enhanced and integrated to allow configuration within the sales documents of the SAP ERP application reusing existing model data while leveraging its improved functionality and advanced user interface within SAP ERP.
    12.Price Catalog (PRICAT): – Inbound Processing (Retail):-Inbound message processing of PRICAT essages:As of SAP ERP Central Component enterprise extension retail 6.0 (EA-RET 600) component, you can create and change article data automatically, or in an interface for mass data handling. The system takes both single and generic articles and bills of material and prices into account.
    13.Rebate Condition Records Using Scales:-As of SAP ERP 6.0 application, you can set up rebate agreements so that the scale base value and the rebate scale level is derived from the total sales volume of multiple condition records. You do this by grouping condition records in the rebate agreement.
    14.SAP Role: – Internal Sales Representative:-SAP role – internal sales representativeThis role delivers all the functions to fulfill the requirements of an internal sales representative. This includes tasks such as answering phone calls from customers and prospective customers, processing incoming inquiries and sales orders, and preparing quotations and sales contracts.Target groupThe responsibilities of an internal sales representative (or customer service representative) include the following:- Answering phone calls from customers and prospective customers- Answering product, price, and order status related questions- Processing incoming inquiries and sales orders- Preparing quotations and sales contracts- Taking sales orders and ensuring successful order processing – for example, taking care of the completeness of sales documents, releasing delivery-blocked orders, and so on - Support for the outside sales force – for example, checking on quotations, updating customer master data, and so on- Preparing reports and sales analyses for the sales manager and the sales teamWork overview This work center gives you an overview of your daily work and gives you easy access to your most important tasks. Sales documents This work center allows you to work on all your sales documents. You can create and maintain inquiries, quotations, sales orders, sales contracts, scheduling agreements, and billing documents. Order fulfillment This work center allows you to monitor order fulfillment. You can display deliveries, backorders, and shipments, and can check product availability.Master data This work center enables you to work on all your master data. You can create and maintain business partners, customer agreements, prices and conditions, and products.
    I hope it will help you
    Regards,
    Murali.

Maybe you are looking for