Difference between syn/asyn vs asyn/syn Bridge

Hi Group,
Can any body give me the difference between Syn/Asyn Bridge ,Async/Sync
Beidge,and what are the satpes in both of these

Hi,
Sync/async communication enables a synchronous sender system to communicate with a receiver system that cannot process synchronous messages
Refer this blog
/people/ravikumar.allampallam/blog/2005/02/17/bridging-the-sync-async-bridge-with-fork-xi
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
There is an example of the Sync/Async Bridge in th SWCV: SAP BASIS.
Namespace: http://sap.com/xi/XI/System/Patterns
Asyn - Synch BPM - /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
regards

Similar Messages

  • What's the difference between Core 2 Duo and Sandy Bridge Processors?

    I have the BASE model of the late 2009 iMac which is the first of the new edge to edge glass iMac's! (3.16 GHZ 4GB RAM) Just wondering what is the advantage and how much faster are the new Sandy Bridge i5 and i7 iMacs? Would I notice the difference if I were to upgrade? How much?
    Thank you

    Hi,
    have a look/read here http://www.marketingtactics.com/Speedmark/
    The speed gain can be anything from dramatic to not even noticeable depending on your own usage.
    Regards
    Stefan

  • Specific differences between AP and bridge modes?

    I've RTFM'd everywhere but cannot find anything definitive regarding the differences between AP+client versus bridge+bridge modes.
    Presume you have a pair of AP1200's. First test case: One is in AP mode and the other is in WGB mode. Second test case: One is in root-bridge mode and the other is in non-root-bridge mode.
    In both cases traffic will pass bidirectionally from one Ethernet port to the other. What, then, are the technical differences between these two situations? Do the "bridges" place less load on the AP1200's CPU? Does AP-based operation yield more diagnostic data? What are the advantages and disadvantages of each mode?
    I can't find anything that digs into the details. Any help appreciated. Thanks!

    Thanks for your response. A few comments, and then a question:
    * Looks to the AP just like a standard client, so it interoperates with all APs
    What does? A 1200 in WGB mode? If so, then yes it looks like a standard client to the AP but Cisco explicitly states it will only associate with other Cisco AP's. It is not compatible with "all APs".
    If you mean a non-root-bridge looks like a standard client to an AP, that's true but the AP must be in "AP with wireless clients" mode which is not one of the test cases I was asking about.
    * No configuration required
    Of the WGB? Mine need configuration: SSID, encryption keys, etc. It's just like setting it up as an AP except for the mode you select.
    Of a (non-)root-bridge? Mine have needed configuration in that mode, too. Same as above.
    Not sure what you mean by "no configuration required".
    # Disadvantages:
    * Supports only a single wired client
    Nope, in WGB mode pre-1200 units supported up to eight wired devices. 1200's and later support up to 250 clients. Cisco docs are clear on this.
    In bridge mode I'm not aware of any wired client limits. The device is simply passing traffic between the two interfaces.
    * WGB itself is not manageable
    Not sure what you mean by "not managable".
    Back to my question: What is the difference between AP+client mode vs. root-bridge+non-root-bridge mode? Does the AP+client mode make more decisions about traffic routing or prioritization, while bridge-based operation is less "intelligent"? Something else?
    My tests show no discernable difference in throughput, even with multiple clients/nonroot bridges. When multiple users consume bandwidth simultaneously, it is shared among them just as you'd expect.
    So... what ARE the differences, as far as the decisions IOS is making, between the different modes?
    Thanks!

  • Can I supress BPM for Asyn outbound and syn inbound proxy interface

    Hi all,
    Is there any other alternate to remove the BPM at asyn outbound and syn inbound proxy interface. Reason because I can create another outbound proxy interface at the receiver. But at receiver side we already invested huge code to develop the sync server proxy. So the intension is, with out disturbing the code Can I make the message flow with out BPM?
    Because the reason of removing BPM is for a simple interface like this I don't want to use BPM. souce is JDBC and receiver is ECC 6.0. I know with out BPM it can not be achieved but in PI 7.1 EHP 1 by any chance can we do?
    I mean during response mapping from server proxy shall we use look up function to achieve?

    This bean I have to use at sender channel right?
    Yes
    I mean is it is limited to JMS adapter?
    No
    You can find more information in the Wiki which deals with FILE  to RFC synchronous...using the above Module

  • Difference Between ASYN-RFC and TRFC

    What is the difference between <b>ASYNCHRONOUS RFC</b> and <b>TRANSACTIONAL RFC</b>. I'm totally confused.

    Hi
    Asynchronous remote function calls (aRFCs) are similar to transactional RFCs, in that the user does not have to wait for their completion before continuing the calling dialog. There are three characteristics, however, that distinguish asynchronous RFCs from transactional RFCs:
    ·        When the caller starts an asynchronous RFC, the called server must be available to accept the request.
    The parameters of asynchronous RFCs are not logged to the database, but sent directly to the server.
    ·        Asynchronous RFCs allow the user to carry on an interactive dialog with the remote system.
    ·        The calling program can receive results from the asynchronous RFC.
    You can use asynchronous remote function calls whenever you need to establish communication with a remote system, but do not want to wait for the function’s result before continuing processing. Asynchronous RFCs can also be sent to the same system. In this case, the system opens a new session (or window). You can then switch back and for between the calling dialog and the called session
    RECEIVE RESULTS FROM FUNCTION Remotefunction is used within a FORM routine to receive the results of an asynchronous remote function call. The following receiving parameters are available:
            IMPORTING
            TABLES
            EXCEPTIONS
    The addition KEEPING TASK prevents an asynchronous connection from being closed after receiving the results of the processing. The relevant remote context (roll area) is kept for re-use until the caller terminates the connection.

  • Is mapping possible between InterfaceA_Out(Asy) and InterfaceB_In(Syn)

    Hi All,
             I have the following scenario:
              jms(asyn)-->PI7.1->(SOA with request /response)
              When I model this scenario in Integration repository as Integration scenario ,the connection between the two actions(jms  and SOA)  does not show any interface on the receiver side.It only shows on the sender side,so I am unable to map the interfaces and it fails to validate the model.
    Please let me know what might be causing this.

    your scenario assuming that you need to process the response message from the target is a Async - Sync one.
    Regarding your specific question about Is mapping possible between InterfaceA_Out(Asy) and InterfaceB_In(Syn), the answer is no. you can only have an interface mapping between a sync interface to sync interface or async to async.
    you can read thru these links to give u an idea on how to configure JMS scenarios;
    How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
    In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
    Else ref:
    /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
    /people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19

  • Differences between Lightroom and Bridge?

    I was just wondering what the difference (if any) is between Adobe Lightroom and Adobe Bridge

    Adobe Bridge CC vs. Lightroom 5 - Which is best for you? | Adobe Evangelists - Terry White | Adobe TV

  • Difference between bridge-group and VLAN

    Hi all,
    I don't understand very well the difference between bridge-group and VLAN...
    Could someone explain me or give me a site which could help me?
    Thx U by advance!

    Khay
    bridge-group is used on a router to enable bridging on an interface. In terms of functionality a bridge-group is very similar to a VLAN. For example if you create bridge-group 1 and assign it to interfaces FastEthernet 1/0 and 2/0 and you create bridge-group 2 and assign it to interfaces FastEthernt 1/1 and 2/1 it is like creating 2 VLANs. Devices in bridge-group 1 (interfaces 1/0 and 2/0) can communicate with each other but not with devices in bridge-group 2 (intefaces 1/1 and 2/1).
    HTH
    Rick

  • What Is The Difference Between A Router Extender & A Bridge?

    Since I was here, I just thought I'd ask what is the difference between a router extender like the RE 1000 and what is known as a bridge?  Does one work better than the other?  Is one better for one thing, like a wired DVD player, than the other?

    The RE1000 can act as range extender as well as bridge where as the versatile Wireless Ethernet Bridge can make a wired Ethernet-enabled device a part of your wireless network.
    If we talk abuot the functionality in the bridge mode, then in that case both will be same the only difference will be, WET610N will be getting DUAL frequency i.e. 2.4GHz and 5GHz from the wireless network if that is also a DUAL band. 

  • Difference between bridge mode and routed mode on CSS

    Hi,
    Could some one tell me the difference between routed mode and bridge mode.
    Regards
    Neha

    Hi,
    routed mode:
    The CSS acts as a router, it routes packets from the client to the server. The server has the ACE configured as default-gateway.
    There is a client-side VLAN and a server-side VLAN. These VLANs have different subnets.
    Bridged mode:
    The CSS acts as a bridge, it switches frames from the client to the server. The server has the upstream router configured as default-gateway.
    There is a client-side VLAN and a server-side VLAN. These VLANs have the same subnet, but different VLAN IDs. The ACE bridges the client traffic from the client-side VLAN to the server-side VLAN.
    Bridged mode would be most used in case one cannot change the servers IP addresses, or if address space is an issue.
    Hope this helps.
    Kind regards,
    Dario

  • Major Differences between Project Server and Project Proffessional

    Hi,
    We are planning to use MS Project with SharePoint. In the initial research i came to know that we will need MS Project Professional to syn task lists on SharePoint. We are looking at a solution where all the Project Leaders (Across the world) can update
    their project statuses online using SharePoint (right now this is being done manually).
    I then came to know that we can access MS Project on SharePoint using MS Project Server. I am now not able to decide on which one to choose. So I want to know the major differences between MS Project server
    and MS Project professional. Which one would full fill my requirements. I cannot limit my requirements to only updates. but also would want to add some extra features like Site Mail box and Project Issues log, so that my Project Management is more effective
    and is better.
    Please answer at earliest
    Regards
    Srikar Gundabathula 

    Srikar --
    Microsoft Project Server 2013 is an enterprise project management (EPM) application in which all data is stored in a SQL Server database.  This EPM software application allows organizations to manage dozens, hundreds, or thousands of projects and
    to manage dozens, hundreds, or thousands of resources as well.  To use Project Server 2013, your PMs would each need a copy of Microsoft Project Professional 2013 and would use this software to plan their projects and to save and publish the projects
    to Project Server.  Your team members and executives would use their Internet Explorer to access the web-based user interface to Project Server 2013 called Project Web App, or PWA for short.
    In PWA, your team members can use either The Timesheet page or the Tasks page to report progress on their task assignments.  In PWA, your PMs would be able to see the updates from their team members and be able to approve those updates.  Once
    approved, the task updates are applied to the appropriate project so that the PM does NOT have to retype the updates.  For executives, PWA offers the Project Center page which shows the portfolio of published projects in Project Server, where they can
    see the current status of each project.
    Beyond this, Project Server also includes a Business Intelligence Center where your Project Server administrator can create very customized reports for various audiences.  In brief, there is a LOT of power in Project Server 2013.  If you think
    you might want to use it, you have two options:  (1) Buy the software, install it yourself, set it up yourself, and maintain it yourself, or (2) contract with Microsoft to use Project Online, which is a hosted version of Project Server 2013 that is maintained
    by Microsoft in the cloud.
    You can learn even more about Project Server 2013 at the following link:
    http://office.microsoft.com/en-us/project/project-portfolio-management-for-the-enterprise-project-server-FX103802061.aspx
    Hope this helps.
    Dale A. Howard [MVP]

  • What is Difference between SXMB_MONI and SXMB_MONITOR?

    what is Difference between SXMB_MONI and SXMB_MONITOR?
    Can any explain to this question.please?

    Hello,
    Both are same.
    SXMB_MONI is area menu which will contain all multiple transactions pertaining to monitoring.
    SXMB_MONI contains some functions viz monitoring for Bridging, Archived Msgs, Job overview, persistence layer analysis.
    SXI_monitor directly leads to the message monitoring for the IS, which is part of the SXMB_MONI.
    SXI_MONITOR directly executes the monitoring report.
    Thanks,
    Satya

  • What is the difference between SAP NW PI7.1 and PI7.1 EHP1

    We have a customer using SAP PI7.1 EHP1. The application to be deployed
    isdeveloped on SAP Netweaver PI 7.1 SP06.
    We need to know if application developed and transported from PI7.1 is
    compatible with EHP1?
    Below are the Components used by the application .
    1) SSL communication using SOAP adapter
    2) Java mapping , Graphical mapping , XSLT mapping
    3) Customised EJB modules
    4) Adapter framework
    5) ALE layer for IDoc communication from ERP to PI
    6) RFC lookups to PI system and ERP system.
    Questions
    1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
    2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
    Regards,
    Sneha

    Hi,
    EHP Pi7.1 new
    IPv6 Support in SAP Systems (new)
    Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
    High Availability (New)   Locate the document in its SAP Library structure
    Use
    A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
    [Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
    Message Packaging (New)
    Monitoring Milestones (New)   Locate the document in its SAP Library structure
    Use
    You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
    check  given Link
    http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
    Regards,
    Amit

  • Color differences between Camera RAW 6.2 and Photoshop CS5

    Hi,
    I have got two problems:
    Everytime I open a raw file in Camera Raw, the picture is a bit darker than in Photoshop. The difference is very annoying...
    and, apart from that,
       2. The pictures in Adobe Bridge look much more saturated and darker than in Camera RAW or Photoshop. The result of my research was, that I have to go to "Edit -> Bridge Color Pre-Settings" and choose the right color-management. But when I klick on the button, it says that the function is something like deactivated. Someone said, I have to buy the entire Creative Suite to activate this function? Is that true?
    The color profile I work with: sRGB
    I already updated Bridge, Camera RAW and Photoshop. But the problem still exists...
    Does anyone know the problems and may help me?
    Thanks a lot!
    -Aldo

    Thanks for your replies.
    A few minutes ago I calibrated my display again. Now, the difference between ACR and Photoshop seems to be even greater.
    When the calibration was finished, the software offered a before/after-button (Before and after calibration). The "Before-image" was much more dark than the "after-image". Just as dark as the photo is in ACR(!).
    Maybe there's a connection. I think Photoshop uses the right profile (the profile generated by the Spyder2Express), but ACR uses some different wrong profile.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    Chris Cox wrote:
    Hmm, they should be the same.
    How did you calibrate your display?  Where did the display profile come from?
    The profile called "Spyder2express.icm" was saved in C:\Windows\System32\spool\drivers\color

  • Difference between EDN-DB and EDN-JMS implementation

    Experts,
    Looking for a difference between EDN-DB and EDN-JMS implementation. We have EDN implementation going on, where multiple source systems will be publishing business events. Events can be published using SOA Suite or JMS Bridge from AQ and MQ. In this scenario which implementation approach is suited better ?

    Oracle Apps Adapter can be used for many other products other than E-Business Suite (JD Edwards E1, OTM, and others).  The apps adapter was mainly used in ERP systems and was strong when you needed have added functionality other than just polling a db for a status / calling a stored procedure...  It could connect out to other business services, xml gateways and so-on.
    From a technical aspect / development perspective I always thought of that the Oracle Apps Adapter simplifies the development but, may is not flexible. The App Adapter's strength is the services that are difficult to integrate with (business services, xml gateway). If you need to hook in to these types of services, use the APPS adapter. (Again like it is named the "Apps Adapter" its for interacting w/ other applications to enable real-time processing / functionality. 
    That being said the dbAdapter can be very powerful but, like it is named is database focused (to poll some table to know when to kick off other logic and enable real-time functionality through database interaction.
    Looking at the Oracle 12C Roadmap I had heard that there is more planned for the Oracle Apps Adapter moving forward, especially as Anuj said in the "Financial Apps" side of the isle at Oracle. Who knows what is real and what isn't though =]
    Hope this helps!
    -Luke

Maybe you are looking for