Difference between the Logical System n Client

Hi Guys,
  i need a some information plz help me.
what r the differences between the logical system n the client.
plz give me the detail explanation
appreciated with points
regards
kk

Hi there,
'logical system' is used to identify an individual client in a system, for ALE
communication between SAP systems. That's why you see a field for 'logical
system' in the client master data in SCC4 (table T000).
Client can be defined as commercial, organizational, and technical terms, a self-contained unit in an SAP system with separate master records and its own set of tables.
Hope it helps
Cheers
Deepanshu

Similar Messages

  • Time difference between the Identity system and Access System: OAM

    I was installing OAM. Performed the below steps.
    -installed identity server
    -installed webpass
    -setup of identity system console
    -installed policy manager
    -setup of access system console
    The above steps were successfull. Then when i was logging into Access system console, i am getting the below error:
    Error:there was a problem obtaining the userid. One possible reason for this is a time difference between the Identity system and Access systems (Policy Manager and Access system console).+
    The Identity Server, WebPass and Policy Manager are installed on the same machine.
    Userdata repository: OVD 10.1.4.3
    Policy and Config Data Repository: OID 11.1.1.3
    OAM: 10.1.4.3
    Windows2008 - 64bit
    Found document in metalink similar to this issue. suggested to change ldapmaxofreties. but didn't help.
    Any idea on this error. Please Advise.
    Thanks in advance.

    Try this::
    Check Time Difference Between Identity and Access Manager Systems
    Check the logfile in the Access Manager install directory. The default location is <$AMinstall_dir>/access/oblix/logs/oblogfile.
    If the file exists and it contains following line "skew = slack = " that means the Identity and Access Manager Web Servers are on different machines and have not synchronized time within a minute.
    Either synchronize times between the two machines within a minute's accuracy or you can increase the slack by modifying these two files: <$AMinstall_dir>/access/oblix/apps/common/bin/oblixbaseparams.lst: loginslack: <$IMinstall_dir>/identity/oblix/apps/common/bin/oblixbaseparams.xml: loginslack: where numofseconds is more than skew found in the oblogfile.
    For example, if you have following line in oblogfile "skew = 121 slack = 60", set numofseconds in the two parameter files to 130. After doing this, Stop the Identity Manager Web Server. Then stop the Identity Server. Start the Identity Server.
    Then start the Identity Manager Web Server. Start a new browser session and see if you get the same error.

  • Would there be any noticeable difference between the following system memories?

    64GB (8 x 8GB) , PC4-17000, 2133MHz (G.SKILL - x99)
    64GB (8 x 8GB) , PC4-21300, 2666MHz (G.SKILL - x99)
    If I used Pr and Ae on a regular basis, would one of those cards offer a significant advantage over the other?  I've read about them but I'm still not sure; I want your opinions.

    When you say that it's not a recommended configuration, which of these three are you referring to?
    The setup in the picture above? (In Bill Gehrke's Post)
    64GB (8 x 8GB) , PC4-17000, 2133MHz (G.SKILL - x99)
    or the
    64GB (8 x 8GB) , PC4-21300, 2666MHz (G.SKILL - x99)?

  • Error while assigning Logical System to Client

    Hi,
    I am trying to perfomr data transfer suing Idoc from SAP R/3 to PI.
    For this, I have created a logical system PD1CLNT100.
    But when I try to assign the client 100 to this Logical system through SALE, I ge the following error
    "An entry already exists with the same key SALE"
    but I am unable to see this entry in the client list in SALE.
    Please tell me where is it picking the entry from?
    regards,
    Piyush

    Hi  Piyush Mathur SAP   
    Check once again for Client 100 ... there willl be entry  (Assign the Logical System to Client)
    Check in table  V_TBDLS  for Logical Systems..
                             T000         for Clients
    Log out from the system and log in once again and check it....
    i hope Above info helps you
    Thanks
    Ramesh

  • Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

    ''duplicate of https://support.mozilla.com/en-US/questions/905881''
    Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

    Hi Kossa,
    You can also check if the issue occurs in
    Clean Boot. If the issue disappears in the Clean Boot environment, you can continue to narrow down which entry is causing the issue.
    Besides, uninstall it and re-download
    a fresh copy of FireFox to check the result. If the issue still exists, create a new user account to see if it occurs.
    If the issue persists, you can contact Mozilla Support directly and use Internet Explorer (IE) during the time.
    J
    Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
    regarding this product's performance or reliability.
    Regards,
    Linda

  • Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

    Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

    Hi O_H_I_O,
    Have you got an error code ?
    Considering it is a brand new machine ,please update the machines .To get a better performance of the machines ,we should always keep it up to date .
    There is a possibility that the DVD/CD-ROm drives driver is old or has corrupted .Please open the device manager , update or reinstall the driver to have a check.
    Apart from this ,we can run the built-in tool to a diagnostic :
    Control Panel\All Control Panel Items\Troubleshooting\All Categories\Hardware and Devices
    We also can run the following fixit tool to have a check.
    Fix problems with CD or DVD drives that can’t read or write media
    http://support.microsoft.com/mats/cd_dvd_drive_problems
    Best regards

  • Difference between the XML for the "Initial System Data" in the module ERM

    Hello,
    I wan to know what's the difference between the XML for the "Initial System Data" in the module ERM of SAP GRC AC 5.3.
    RE_init_clean_and_insert_data.xml
    RE_init_append_data.xml
    RE_init_methodology_data.xml
    And what "Initial System Data" do I have to put?? the rule set?
    I'm new in SAP GRC.
    Thank you very much.
    Pablo Mortera.

    Pablo,
        I am sorry but I am not able to get the question so I will explain as per my understanding. All of these three xml files contain necessary out of the box data which is required for ERM to function. Without this data, your ERM would not work so this is the first thing you want to do in ERM after successful installation.
    After that, you will have to create connector and landscape and then synchronize transaction code, auth objects, fields, values etc by running through each background job one by one.
    Regards,
    Alpesh

  • Error in the logical system (BW - R3 connection)

    Hey guys, i need help, actually i created a connection between BW and R3 system, but i think i wrongly assigned the details to another BW system and now whenever i tried to load the data, it's not being processed.
    And i checked and it shows me that the connecetion is between source system (538) and BW (B3T800), though my BW client is BW (BW TEST). so how do you think i can change my background users i assigned while creating the source systems, because i think, while creating the source system, i used wrong background users. So instead of connecting via logical system (BW test), its connecting via (B3T800) to SAP R3 (538).
    --> Also i tried changing the Logical system name, as i checked and showed that for my BW client now it has a entry of the BW system (B3T800) and when i tried chnging it, it let me change that, but when i went to the RSA1, SAP doesn't let me access that, saying a message "your logical system has been changed", so can i change the logical system, do you guys think my problem will be solved?
    Regards,
    Amit Jaidka

    I have checked in SM37 taking that request number and when i checked the job log , its showing
    5 LUWs confirmed and 5 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
    Lock table overflow
    Job cancelled after system exception ERROR_MESSAGE
    what is the reason for this termination in R/3.
    Thanks

  • Use and impact of the logical system (SCC4)

    An error has been made in our SAP system (production environment), transaction SCC4. The field «Logicial system» has been changed from «PRD460» to «QAS460». It has been left this way for few weeks and when we realized the mistake, we changed it back from «QAS460» to «PRD460».
    For few hours, the document numbers in MM (t-code MIGO) were generated, but were not found in t-code MB03. We were able to generate them manually in t-code SM13 and the problem was solved.
    What is the use of the «Logicial system» ? What could have been the impact on our database and on the integrity of our system of having the wrong logical system set to our production environment for few weeks ?
    Thanks.

    Hi,
    Logical System Names
    When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.                               
    A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
    Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
    Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
    You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
    Anil

  • How to change or rename the logical system name T90CLNT090 IN BI 7

    HI Expert's,
    i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
    in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
    In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
    because of this i am not able to create the source system between r/3 also.
    so how to change this source system name for T90CLNT090.
    regards
    harikrishna N

    Hi,
    Pls follow this OSS note : 325525.
    Note 325525 - Copying and renaming systems in a BW environment
    Summary
    Symptom WARNING: THIS NOTE HAS BEEN REPLACED.  FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
    You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
    Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
    Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
    Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
    Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
               Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
               Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
               Reactivate all partner agreements that carry the new logical system name after renaming.
    Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
               Solution scenario 2):
    If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                        Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                        Reactivate all partner agreements that carry the new logical system name after renaming.
    Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
    Scenario 3) You want to copy a single BW system of the group by database copy.
    Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                         Solution scenario 3)b): See Note 184754.
    Scenario 4) You want to copy a single source system of the group by database copy.
    Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
               Solution scenario 4)b): See Note 184322.
    Scenario 5) You want to import a client copy in a source system.
               Solution scenario 5): See Note 325470.
    Thanks & Regards,
    Suchitra.V

  • Difference Between the grouped column

    Hi ,
    I have matrix based report in which the columns are dynamically generated based on the month and year.
    3 filter value in the report
    quarter,
    year and
    Previous 12 months .
    Katherine community moderator reporting services helped me achieving the with a similar kind of report. Due to some difference from the previous requirement am posting a new question .
    Current Matrix Outcome :
    Desired Outcome
    Please note that the Month columns are dynamically generated so for example if the filter value is quarterly 
    3 months will be generated , march-14,april-14,may-14 and then i need to display the difference
    in new columns like march-14 - april-14 ,april-14-may-14. The column headers of the new differential columns i can achieve
    but the difference between the types on monthly basis am unable to achieve.
    Similarly it goes for the yearly and previous 12 months filter value.
    Kindly let me know if more detail is required .
    Thanks
    Priya

    Hi Priya,
    According to your description, you have a matrix in your report. Now for each month, you want to always get the difference value between current month and previous month with columns generated. Right?
    In Reporting Service, if we want to compare values of two adjacent columns in a matrix, the best way is using custom code to deal with the logic. In this scenario, we want to compare the current value with previous value. The difference value is always along
    with columns generated. So we suggest put this column inside of group instead of appending them at the end of the matrix. In this column, we can call the function defined in the custom code. We have tested this case in our local environment. Here are steps
    and screenshots for your reference:
    Put the custom code into report:
    Private queueLength As Integer = 2
    Private queueSum As Double = 0
    Private queueFull As Boolean = False
    Private idChange As String=""
    Dim queue As New System.Collections.Generic.Queue(Of Integer)
    Public Function CumulativeQueue(ByVal currentValue As Integer,id As String) As Object
    Dim removedValue As Double = 0
    If idChange <> id then
            ClearQueue()
                    idChange = id 
                    queueSum = 0 
                    queueFull = False
                    CumulativeQueue(currentValue,id)
    Else  
                    If queue.Count >= queueLength Then
                                    removedValue = queue.Dequeue()
                    End If
                    queueSum += currentValue
                    queueSum -= removedValue
                    queue.Enqueue(currentValue)
                    If queue.Count < queueLength Then
                    Return Nothing
                    ElseIf queue.Count = queueLength And queueFull = False Then
                    queueFull = True
                    Return (queueSum-currentValue-currentValue) 
                    Else
                    Return (queueSum-currentValue-currentValue) 
                    End If
    End If
    End Function
    public function ClearQueue()
    Dim i as Integer
    Dim n as Integer = Queue.Count-1
    for i=n To 0 Step-1
                    queue.Dequeue()
    next i
    End function
    Create a matrix based on your information. Put expression into corresponding position.
    A: =Code.CumulativeQueue(Fields!Amount.Value,Fields!Type.Value)
    B: =IIF(Previous(Fields!Month.Value) is nothing,"",MonthName(IIF(Previous(Fields!Month.Value) is nothing,1,Previous(Fields!Month.Value)))&" - "&MonthName(Fields!Month.Value))
    C: =MonthName(Fields!Month.Value)
    Ps : You may need to modify the custom code and expression based on the data type in your dataset.
    Create parameter for filtering data.
    Save and preview. It looks like below:
    Reference:
    SSRS 2008 R2 - Add moving average to column group
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
      

  • Difference between the design of clusters PCLx and others like RFBLG etc .

    There are a few nagging questions which I was not able to find in the forum hence i have to post a new question.
    I am a little confused about the difference between the different clusters .
    If i start with RFBLG i.e. the cluster for BSEG BSEC etc ,I can see that the tables which are part of this cluster
    can be viewed through different methods like
    1) whr usd list for RFBLG
    2) dd02l table and give the required parameters there
    now when I compare this with another so-called cluster PCL1 if find that PCL1 is not recognized as  a cluster
    and also I am not able to see the same in dd02l table when i give PCL1 and the tabtype as cluster which I was able to see
    for the RFBLG ,there are other tables similar to RFBLG .
    1) SO what is the difference between the RFBLG type of clusters and the PCLx type of cluster
    2) are pclx and rfblg..type of clusters same ?
    3) why does PCL1 shows that it is a transparent table ? where as rfblg shows in a diff way in se11
    4) i know we access data from PCL1 using import and export stmts ,DO OR CAN WE DO THE SAME FOR RFBLG
    5) I found that each and evry cluster table had diff fields ,this was kinda surprising for me as I had been thinking
    that all cluster tables need to follow a certain rule ,SO WHO DECIDES THE FIELDS OF A TABLE CLUSTER ?
    6) PCL1 has the index button enabled ,which again I think is not according to the cluster table rules?how?
    7) I understand that we can save data in form of internal tables in the PCL1 cluster ,can we do the same in RFBLG ?
    8) Can I think on lines that PCL1 and RFBLG type of cluster are two totally different types of data dictionary objects
    and the usage and implementation of both of them is different and that the design and the BASE of both of such objects
    is different .
    I know this is a long list but I am sure that answers to these questions would really require some one who has really really work hard and invested a lot of time in understanding the dictionary system.I am awaiting a few answers ,few hints and a healthy discussion till we get them .
    Thanks ...
    a

    Hello,
    1/
    BSEG is a typical Cluster Table.
    This means that the physical table BSEG does NOT exist in the database, physical data for BSEG is stored in the database (table) cluster RFBLG.
    In ABAP however you can perform selects on BSEG (with all fields from the SAP repository structure, see SE11 on BSEG), during execution the SAP database layer will translate these statements to physical selects in the RFBLG database table, so in ABAP this is transparant.
    More info :
    [http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
    2/
    PCL1, PCL2, ... are normal SAP transparent tables, however in HR they are often called HR cluster table.
    Transparent tables are SAP objects where there is also a database table with the same name that contains the physical data.
    However the PCL tables are somewhat different from normal transparent tables (data is compressed, external programs can not interpret the data, ...).
    This means that in ABAP you can not use simple SQL statements to access data in PCL tables (because of compressed format).
    In stead statements like EXPORT TO DATABASE and IMPORT FROM DATABASE need to be used.
    More info :
    [http://fuller.mit.edu/hr/cluster_tables.html|http://fuller.mit.edu/hr/cluster_tables.html]
    Wim

  • What'z the difference between the Commercial Invoices and

    What'z the difference between the Commercial Invoices and
    Invoices/Excise Invoices? Also I understand that we can combine 2~3
    invoices and can create one commercial invoice? If it is possible, how
    to create the same?
    cheers
    shalsa007....

    Hello,
    A commercial invoice is a bill for the goods from the seller to the buyer. Commercial invoices are utilized by customs officials to determine the value of the goods in order to assess customs duties and taxes.
    In general there is no standard form for a commercial invoice although they tend to contain many of the following features:
    •     seller's contact information
    •     buyer's contact information
    •     consignee's contact information (if it is different from the buyers)
    •     invoice date
    •     a unique invoice number
    •     sales terms (usually in incoterm format)
    •     payment terms
    •     currency of sale
    •     full quantities and description of merchandise (Generally this includes unit price and total price. Product descriptions should be consistent with the buyer's purchase order. Including the Harmonized System commodity codes can be helpful, especially in countries that are WTO members.)
    Excise invoice “Original for Buyer copy”, whether  prices are inclusive or exclusive of excise duty.
    The invoice in which the Excise duties are included.
    As per Indian tax system, Excise duty (16%) is payable by each manufacturing unit on the value of manufactured goods / on the value added. The manufacturing plant is supposed to submit an excise duty report on fortnightly / monthly basis. Various registers (RG1, RG23A, RG23C, PLA) are maintained for that purpose, which record all the transactions including movement of goods, cenvat credit available and cash balance available.
    In SAP, we use transaction j1id for configuration and j1iin, j2i7, j1i5, j2i5, j2i6, j1ip for creating, extracting and printing excise invoice. 
    *Please reward if this helps**
    Regards
    AK

  • What are differences between the target tablespace and the source tablespac

    The IMPDP command create so manay errors. But the EXAMPLE tablespace is transported to the target database successfully. It seems that the transported tablespace is no difference with the source tablespace.
    Why create so many errors?
    How to avoid these errors?
    What are differences between the target tablespace and the source tablespace?
    Is this datapump action really successfull?
    Thw following is the log output:
    [oracle@hostp ~]$ impdp system/oracle dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
    Import: Release 10.2.0.1.0 - Production on Sunday, 28 September, 2008 18:08:31
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    Master table "SYSTEM"."SYS_IMPORT_TABLESPACE_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_TABLESPACE_01": system/******** dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
    Processing object type TABLE_EXPORT/TABLE/TABLE
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    CREATE TABLE "OE"."CUSTOMERS" ("CUSTOMER_ID" NUMBER(6,0), "CUST_FIRST_NAME" VARCHAR2(20) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE, "CUST_LAST_NAME" VARCHAR2(20) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE, "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" , "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" , "NLS_LANGUAGE" VARCHAR2(3), "NLS_TERRITORY" VARCHAR2(30), "CREDIT_LIMIT" NUMBER(9,2), "CUST_EMAIL" VARCHAR2(30), "ACCOUNT_MGR_ID" NU
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
    CREATE TABLE "IX"."ORDERS_QUEUETABLE" ("Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" VARCHAR2(30), "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" VARCHAR2(30), "DEQ_
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported "SH"."CUSTOMERS" 9.850 MB 55500 rows
    . . imported "SH"."SUPPLEMENTARY_DEMOGRAPHICS" 695.9 KB 4500 rows
    . . imported "OE"."PRODUCT_DESCRIPTIONS" 2.379 MB 8640 rows
    . . imported "SH"."SALES":"SALES_Q4_2001" 2.257 MB 69749 rows
    . . imported "SH"."SALES":"SALES_Q1_1999" 2.070 MB 64186 rows
    . . imported "SH"."SALES":"SALES_Q3_2001" 2.129 MB 65769 rows
    . . imported "SH"."SALES":"SALES_Q1_2000" 2.011 MB 62197 rows
    . . imported "SH"."SALES":"SALES_Q1_2001" 1.964 MB 60608 rows
    . . imported "SH"."SALES":"SALES_Q2_2001" 2.050 MB 63292 rows
    . . imported "SH"."SALES":"SALES_Q3_1999" 2.166 MB 67138 rows
    Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."REGIONS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."REGIONS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."COUNTRIES" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."COUNTRIES" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."LOCATIONS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."LOCATIONS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."DEPARTMENTS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."DEPARTMENTS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOBS" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOBS" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."EMPLOYEES" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."EMPLOYEES" TO "EXAM_03"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'USER1' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOB_HISTORY" TO "USER1"
    ORA-39083: Object type OBJECT_GRANT failed to create with error:
    ORA-01917: user or role 'EXAM_03' does not exist
    Failing sql is:
    GRANT SELECT ON "HR"."JOB_HISTORY" TO "EXAM_03"
    ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
    ORA-39112: Dependent object type INDEX:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_LNAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"OE"."CUST_EMAIL_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type INDEX:"PM"."PRINTMEDIA_PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_CREDIT_LIMIT_MAX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_ID_MIN" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"PM"."PRINTMEDIA__PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"IX"."SYS_C005192" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUSTOMERS_PK" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_LNAME_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_EMAIL_IX" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"PM"."PRINTMEDIA_PK" creation failed
    Processing object type TABLE_EXPORT/TABLE/COMMENT
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
    ORA-39112: Dependent object type REF_CONSTRAINT:"OE"."CUSTOMERS_ACCOUNT_MANAGER_FK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39083: Object type REF_CONSTRAINT failed to create with error:
    ORA-00942: table or view does not exist
    Failing sql is:
    ALTER TABLE "OE"."ORDERS" ADD CONSTRAINT "ORDERS_CUSTOMER_ID_FK" FOREIGN KEY ("CUSTOMER_ID") REFERENCES "OE"."CUSTOMERS" ("CUSTOMER_ID") ON DELETE SET NULL ENABLE
    ORA-39112: Dependent object type REF_CONSTRAINT:"PM"."PRINTMEDIA_FK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    Processing object type TABLE_EXPORT/TABLE/TRIGGER
    ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
    ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
    Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
    ORA-39112: Dependent object type INDEX:"OE"."CUST_UPPER_NAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_UPPER_NAME_IX" creation failed
    Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
    Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
    ORA-39112: Dependent object type PROCACT_INSTANCE skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39083: Object type PROCACT_INSTANCE failed to create with error:
    ORA-01403: no data found
    ORA-01403: no data found
    Failing sql is:
    BEGIN
    SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_SIGNATURE_TABLE('AQ$_ORDERS_QUEUETABLE_G');COMMIT; END;
    Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_V" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_N" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_R" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_E" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
    Job "SYSTEM"."SYS_IMPORT_TABLESPACE_01" completed with 63 error(s) at 18:09:14

    Short of trying to then reverse-engineer the objects that are in the dump file (I believe Data Pump export files contain some XML representations of DDL in addition to various binary bits, making it potentially possible to try to scan the dump file for the object definitions), I would tend to assume that the export didn't include those type definitions.
    Since it looks like you're trying to set up the sample schemas, is there a reason that you wouldn't just run the sample schema setup scripts on the destination database? Why are you using Data Pump in the first place?
    Justin

  • Whats the difference between the Flash Player runtime and Adobe AIR runtime?

    Hey all. I've been into coding for about 5 years now, but I'm a recent convert to Flash development. One of the questions I have at the moment is, considering that SWF files can be run by either Adobe Flash Player OR Adobe AIR, what's the real difference between the two runtime environments? What API's and Objects exist in one environment, but not the other?
    Basically what I'm more or less trying to establish is, when would I want to develop an SWF for AIR, and when would I want to develop for Flash Player, considering that Flash Player can also execute locally (providing support for creating "desktop applications").
    Thanks in advance,
                               Jay.

    Main Difference for the user: he also has to install the AIR runtime, that is about 15MB (Flash Plugin won`t do the job alone).
    The market penetration for AIR is way below that of flash, so your user needs a good reason to install the Runtime
    Also the System requirements are much more harder, you can`t use an Air application in XPSP1 for example.
    As a rule of thumb you could say: Use Air, if you want to have the user something saved locally, with AIR you have the possibility to write any fileformat to hard disk, with flash you can only use so called Local shared objects

Maybe you are looking for