Difference of gui_upload and upload
difference of <b>gui_upload</b> and <b>upload</b> and <b>ws_upload</b>
hi
good
There is no difference from functionality point of view.
But when the new versions of SAP comes into picture certain objects(fun modules,tables,fields etc) will become Obsolete and the new Objects will come into picture in the place of Obsolete Fun modules and other objects
So GUI_Upload and GUI_DOWNLOAD are the newversion of function modules which are the replacement for the UPLOAD and DOWNLOAD fun modules
So we should use the New one.
So it depends on the SAP Version on which you are working
If you are still working in the Older versions of SAP like 4.0 like thing then you can use the DOWNLOAD and UPLOAD.
But if you are working on the latest versions like ECC5.0 and ECC6.0 you have to use GUI_download and GUI_UPLOAD fun modules only
reward point if helpful.
thanks
mrutyun^
Similar Messages
-
Purpose each of these is: Gui_upload and upload
Hi Friends,
Kindly let me know what the Exact Purpose each of these is: Gui_upload and upload
What is the difference between those two?
Akshitha.Hi,
UPLOAD fm is the old function module which is now obsolete. From 4.6C onwards SAP has delivered new FM's for uploading and that is GUI_UPLOAD.
the diff is UPLOAD pops up a box during runtime to accept the file path the GUI_UPLOAD does not pop up any box during runtime instead takes the path as a paramter.
This is what SAP HELP SAYS
Files on the Presentation Server
WS_UPLOAD and WS_DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. WS_UPLOAD and WS_DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
Cheers
VJ
Message was edited by:
Vijayendra Rao -
Difference between GUI_UPLOAD and WS_UPLOAD
Hi,
Please make me clear about the difference between GUI_UPLOAD and WS_UPLOAD. In which cases we need to use these modules...??
Thanks,
SatishI would suggest to always use the GUI_UPLOAD. I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES. Really, you should probably use the class/method instead of the function module.
data: filename type string.
filename = p_file.
call method cl_gui_frontend_services=>gui_upload
exporting
filename = filename
filetype = 'ASC'
changing
data_tab = iflatf
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
no_authority = 6
unknown_error = 7
bad_data_format = 8
unknown_dp_error = 12
access_denied = 13
others = 17.
Regards,
Rich Heilman -
Gui_upload and ws_upload
hi friends,
i have a small doubt i just want to know the difference betweeen
GUI_UPLOAD and WS_UPLOAD which one i have to use.
which function module is useful and most preferred.
regards
srinivasWS_UPLOAD and WS_DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. WS_UPLOAD and WS_DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation. -
About UPLOAD, GUI_UPLOAD and WS_UPLOAD
Hello Experts,
What is the difference between UPLOAD, GUI_UPLOAD and WS_UPLOAD function modules. Please send me brief answer about this on following mail id
"[email protected]"
Reward for useful answer
Thanx and regards,
Rahul TaleleI would suggest to always use the GUI_UPLOAD. I say this because this is the function module which is used in the GUI_UPLOAD method of the class CL_GUI_FRONTEND_SERVICES. Really, you should probably use the class/method instead of the function module.
data: filename type string.
filename = p_file.
call method cl_gui_frontend_services=>gui_upload
exporting
filename = filename
filetype = 'ASC'
changing
data_tab = iflatf
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
no_authority = 6
unknown_error = 7
bad_data_format = 8
unknown_dp_error = 12
access_denied = 13
others = 17.
Regards,
Rich Heilman -
What is the difference between ws_upload and gui_upload
what is the difference between ws_upload and gui_upload
what is the difference between ws_download and gui_down load
pls tell brieflyHi Kuamr,
UPLOAD and DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. UPLOAD and DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
Hope this resolves your query.
Reward all the helpful answers.
Regards -
Difference between the fms upload & gui_upload
hai ,
can anyone explain me the difference between upload and gui_upload.
thank u in advance,
venkat.Hi
There is no difference from functionality point of view.
But when the new versions of SAP comes into picture certain objects(fun modules,tables,fields etc) will become Obsolete and the new Objects will come into picture in the place of Obsolete Fun modules and other objects
So GUI_Upload and GUI_DOWNLOAD are the newversion of function modules which are the replacement for the UPLOAD and DOWNLOAD fun modules
So we should use the New one.
So it depends on the SAP Version on which you are working
If you are still working in the Older versions of SAP like 4.0 like thing then you can use the DOWNLOAD and UPLOAD.
But if you are working on the latest versions like ECC5.0 and ECC6.0 you have to use GUI_download and GUI_UPLOAD fun modules only
Regards
Anji -
What is the main difference between ws_upload and gui_upload?
Hi All,
What is the main difference between ws_upload and gui_upload?
In what contexts should we use these two function modules??
Thanks,
Creasysearch the forum before posting.
You can find lot of posts related. -
Difference between ws_upload and gui_upload
hi
could anybody tell me
what is the difference between ws_upload and gui_upload
dont say ws_upload is 4.6c version and
gui_upload is 4.7 version.
there might be some difference na thats why they migrate it.
could you plz tell me the differnce
it ll very helpful to me
thanx
kals.Hi Kalyan,
SAP 4.72 onwards system is unicode compliant.
THE WS_DOWNLOAD and WS_UPLOAD function modules are not compatible for unicode systems.
So it is replaced with this new FM GUI_UPLOAD.
There is a SAP note on this issue Note 992677 - FMs WS_DOWNLOAD & WS_UPLOAD incompatible for unicode systems
regards,nishant
please reward points if this helps. -
What is the programming (ABAP) difference between Unicode and non Unicode?
What is the programming(ABAP) difference between Unicode and non Unicode?
Edited by: NIV on Apr 12, 2010 1:29 PMHi
The difference between programming in Unicode or not Unicode is that you should consider some adjustments to make on the Program "Z" to comply with the judgments Unicode Standard.
In the past, developments in SAP using multiple systems to encode the characters of different alphabets. For example: ASCII, EBCDI, or double-byte code pages.
These coding systems mostly use 1 byte per character, which can encode up to 256 characters. However, other alphabets such as Japanese or Chinese use a larger number of characters in their alphabets. That's why the system using double-byte code page, which uses 2 bytes per character.
In order to unify the different alphabets, it was decided to implement a single coding system that uses 2 bytes per character regardless of what language is concerned. That system is called Unicode.
Unicode is also the official way to implement ISO/IEC 10646 and is supported in many operating systems and all modern browsers.
The way of verifying whether a program was adjusted or not, is through the execution of the UCCHECK transaction. Additionally, you can check by controlling syntax (making sure that this asset verification check Unicode).
The main decisions to adjust / replace are (examples):
ASSIGN H-SY-INDEX TEXT TO ASSIGN <F1> by
H-SY-INDEX TEXT (*) TO <F1>.
DATA INIT (50) VALUE '/'. by
DATA INIT (1) VALUE '/'.
DESCRIBE FIELD text LENGTH lengh2 by
DESCRIBE FIELD text LENGTH lengh2 in character mode.
T_ZSMY_DEMREG_V1 = record_tab by
record_tab TO MOVE-Corresponding t_zsmy_demreg_v1.
escape_trick = hot3. by
escape_trick-x1 = hot3.
itab_txt TYPE wt by
ITAB_TXT TYPE TABLE OF TEXTPOOL
DATA: string3 (3) TYPE X VALUE B2023 '3 'by
DATA: string3 (6) B2023 TYPE c VALUE '3 '.
OPEN DATASET file_name IN TEXT MODE by
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
or
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING DEFAULT.
CODE FROM PAGE TRANSLATE a_codepage record by
record TRANSLATE USING a_codepage.
CALL FUNCTION 'DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'WS_DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
CALL FUNCTION 'WS_UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
PERFORM USING HEAD APPEND_XFEBRE +2. by
PERFORM USING HEAD APPEND_XFEBRE +2 (98).
Best Regars
Fabio Rodriguez -
What is the difference between Interface and Conversion?
Hi friends,
Can any one teel me What is the difference between Interface and Conversion in detail.
Rewarded with points
Thanks & Regards,
Naren.Hi,
interface can be outbound i.e writing data to
application server using open dataset,transfer
or downloading data (gui_download)
inbound -> reading data from application server using
open dataset,read dataset,uploading data
using gui_upload.
conversion:BAtch data communication method
where legavy data is uploaded in SAp.
Regards
Amole -
GUI_DOWNLOAD and UPLOAD Function Modules?
Hi All,
What exactly done by GUI_DOWNLOAD and UPLOAD Function Modules?
Akshitha.What you exactly want know?
Here is the Sap documentation for both FM:
FU GUI_UPLOAD
Short Text
Upload for Data Provider
Functionality
The module loads a file from the PC to the server. Data can be transferred binarily or as text. Numbers and date fields can be interpreted according to the user settings.
Example
Binary upload: No conversion or interpretation
begin of itab,
raw(255) type x,
end of itab occurs 0.
CALL FUNCTION 'GUI_UPLOAD'
exporting
filetype = 'BIN'
filename = 'C:\DOWNLOAD.BIN'
tables
data_tab = itab.
Text upload
begin of itab,
text(255) type c,
end of itab occurs 0.
CALL FUNCTION 'GUI_UPLOAD'
exporting
filetype = 'ASC'
filename = 'C:\DOWNLOAD.TXT'
tables
data_tab = itab.
Parameters
FILENAME
FILETYPE
HAS_FIELD_SEPARATOR
HEADER_LENGTH
READ_BY_LINE
DAT_MODE
CODEPAGE
IGNORE_CERR
REPLACEMENT
CHECK_BOM
VIRUS_SCAN_PROFILE
NO_AUTH_CHECK
FILELENGTH
HEADER
DATA_TAB
Exceptions
FILE_OPEN_ERROR
FILE_READ_ERROR
NO_BATCH
GUI_REFUSE_FILETRANSFER
INVALID_TYPE
NO_AUTHORITY
UNKNOWN_ERROR
BAD_DATA_FORMAT
HEADER_NOT_ALLOWED
SEPARATOR_NOT_ALLOWED
HEADER_TOO_LONG
UNKNOWN_DP_ERROR
ACCESS_DENIED
DP_OUT_OF_MEMORY
DISK_FULL
DP_TIMEOUT
Function Group
SFES
FU GUI_DOWNLOAD
Short Text
Download an Internal Table to the PC
Functionality
Data transfer of an internal table form the server to a file on the PC. The Gui_Download module replaces the obsolete modules Ws_Download and Download. The file dialog of the download module is available in the class Cl_Gui_Frontend_Services.
Further information
TYPE-POOLS: ABAP.
Binary download table
DATA: BEGIN OF line_bin,
data(1024) TYPE X,
END OF line_bin.
DATA: data_tab_bin LIKE STANDARD TABLE OF line_bin.
Ascii download table
DATA: BEGIN OF line_asc,
text(1024) TYPE C,
END OF line_asc.
DATA: data_tab_asc LIKE STANDARD TABLE OF line_asc.
DAT download table
DATA: BEGIN OF line_dat,
Packed TYPE P,
Text(10) TYPE C,
Number TYPE I,
Date TYPE D,
Time TYPE T,
Float TYPE F,
Hex(3) TYPE X,
String TYPE String,
END OF line_dat.
DATA: data_tab_dat LIKE STANDARD TABLE OF line_dat.
Get filename
DATA: fullpath TYPE String,
filename TYPE String,
path TYPE String,
user_action TYPE I,
encoding TYPE ABAP_ENCODING.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
WINDOW_TITLE = 'Gui_Download Demo'
WITH_ENCODING = 'X'
INITIAL_DIRECTORY = 'C:\'
CHANGING
FILENAME = filename
PATH = path
FULLPATH = fullpath
USER_ACTION = user_action
FILE_ENCODING = encoding
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
IF user_action <> CL_GUI_FRONTEND_SERVICES=>ACTION_OK.
EXIT.
ENDIF.
Download variables
DATA: length TYPE I.
Binary download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = fullpath
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = length
TABLES
DATA_TAB = data_tab_bin
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
Ascii download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = fullpath
FILETYPE = 'ASC'
IMPORTING
FILELENGTH = length
TABLES
DATA_TAB = data_tab_asc
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
DAT download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = fullpath
FILETYPE = 'DAT'
IMPORTING
FILELENGTH = length
TABLES
DATA_TAB = data_tab_dat
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
Parameters
BIN_FILESIZE
FILENAME
FILETYPE
APPEND
WRITE_FIELD_SEPARATOR
HEADER
TRUNC_TRAILING_BLANKS
WRITE_LF
COL_SELECT
COL_SELECT_MASK
DAT_MODE
CONFIRM_OVERWRITE
NO_AUTH_CHECK
CODEPAGE
IGNORE_CERR
REPLACEMENT
WRITE_BOM
TRUNC_TRAILING_BLANKS_EOL
WK1_N_FORMAT
WK1_N_SIZE
WK1_T_FORMAT
WK1_T_SIZE
WRITE_EOL
FILELENGTH
DATA_TAB
FIELDNAMES
Exceptions
FILE_WRITE_ERROR
NO_BATCH
GUI_REFUSE_FILETRANSFER
INVALID_TYPE
NO_AUTHORITY
UNKNOWN_ERROR
HEADER_NOT_ALLOWED
SEPARATOR_NOT_ALLOWED
FILESIZE_NOT_ALLOWED
HEADER_TOO_LONG
DP_ERROR_CREATE
DP_ERROR_SEND
DP_ERROR_WRITE
UNKNOWN_DP_ERROR
ACCESS_DENIED
DP_OUT_OF_MEMORY
DISK_FULL
DP_TIMEOUT
FILE_NOT_FOUND
DATAPROVIDER_EXCEPTION
CONTROL_FLUSH_ERROR
Function Group
SFES -
hi all
i am using the function module GUI_UPLOAD in my code , i want to know as this FM takes file from presentation server and uploads it to application server, so on presentation server is thr any relation between OS or any files from OS are related for this FM?
Regards
Martinhi martin,
just try this code which can save ur presentation server file to the application server,
REPORT zbdc_test_open_data_set.
PARAMETERS: file(200) TYPE c.
DATA: BEGIN OF g_itab OCCURS 0,
kunnr TYPE kunnr,
land1 TYPE land1_gp,
name1 TYPE name1_gp.
DATA: END OF g_itab.
SELECT kunnr
land1
name1
FROM kna1
INTO TABLE g_itab.
OPEN DATASET file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT g_itab FROM 1 TO 3.
TRANSFER g_itab TO file.
ENDLOOP.
CLOSE DATASET file.
save and excute..
then go to t.code. al11 ->,
select home in that ->,
find ur file name(which u have given in the parameter input of the report) and double click on that, u can see details of the file..
regards.
seshu... -
Hi,
I wrote a program which used GUI_UPLOAD functionality. Now the security guy says that this is not allowed as per SOX and we need to find a alternate way for uploading data.
Can you please suggest me what options do I have.
Regards
VijayHi,
you can use ws_upload and upload functional modules.anyways ws_upload became obsolete.so you can try using upload.
regards,
deepthi reddy -
Download and upload of file to server dir (AL11)
Hello,
I have a custom program that is downloading files from application server directory (they are like templates) to user local pc. User is then modifying such files and finally upload them in another AS directory.
The program is currently making use of FM's C13Z_FILE_DOWNLOAD_BINARY and C13Z_FILE_UPLOAD_BINARY.
There was no problem until hot packages have been implemented: now such FM's are returning an error saying:
Internal program error; (YDOWNLOAD SAPLC13Z 0 C13Z_RAWDATA_WRITE)
When in debug, it appears that the FM C13Z_RAWDATA_WRITE (called by the above mentioned FM's) is checking the calling program (sy-cprog) and if this latter is not within a list of standard programs (hardcoded), then the error is thrown.
My question is: Is there another way to download and upload files without such error? Could you please share the code?
Thanks a lot for help and suggestions!
Best regards,
JFlandersHello,
Please see note 1809258 - Internal program error; ( <program name> SAPLC13Z 0 C13Z_RAWDATA_READ )
A possibile solution is to use cl_gui_frontend_services class methods like gui_download and gui_upload, for instance:
TYPES: t_line(1) type x.
DATA: i_tab TYPE STANDARD TABLE OF t_line,
i_wa(1) type x.
OPEN DATASET lv_file_appl FOR INPUT IN BINARY MODE.
DO.
CLEAR i_wa.
READ DATASET lv_file_appl INTO i_wa.
IF SY-SUBRC <> 0.
EXIT.
ELSE.
APPEND i_wa TO i_tab.
ENDIF.
ENDDO.
CLOSE DATASET lv_file_appl.
DATA: lv_fn TYPE string.
lv_fn = lv_file_name.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
filename = lv_fn
filetype = 'BIN'
append = ' '
CHANGING
data_tab = i_tab
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 24.
* old functioanlity
* CALL FUNCTION 'C13Z_FILE_DOWNLOAD_BINARY'
* EXPORTING
* i_file_front_end = lv_file_name
* i_file_appl = lv_file_appl
* i_file_overwrite = 'X'
** IMPORTING
** E_FLG_OPEN_ERROR = false
** E_OS_MESSAGE = lv_message
* EXCEPTIONS
* fe_file_open_error = 1
* fe_file_exists = 2
* fe_file_write_error = 3
* ap_no_authority = 4
* ap_file_open_error = 5
* ap_file_empty = 6
* OTHERS = 7
This is for the download, similarly should be done for the upload.
Hope this could help. Let me know if further details are needed.
Thank you and bye,
Flavio
Maybe you are looking for
-
How do I set an iTunes song as a ringtone on the 4s?
Hi, Is it possible to set a song downloaded from iTunes as my ringtone? sat ages trying to do it and i have a horrible feeling you can't. Any advice would be great :-) Lisa
-
In which table are stored the data of a set created by GS01?
Hi All, could anyone tell me in which table are stored the data of a set created by GS01? Thanks
-
Can I get the notebook replaced / screen replaced if i have a single dead pixel?
Hi,I have a 2 days old notebook, and there's a stuck pixel (red) on the display.It's an expensive notebook, costs more than a thousand dollars, and HP website tells me I cannot get it fixed or replaced if i have just a single bad pixel.I'm HATING my
-
New image video preset only NTSC but I need PAL, how do I change?
I am creating titles for a 720 PAL video (25fps) for the first time. Photoshop only has a default of NTSC 29.97 and no option for 720 PAL 25fps. How do I change this? I'm running Photoshop CS5 extended. Mark
-
ITunes/QuickTime on Windows 7 - HD Playback Stutter
I can't seem to properly playback HD video files in iTunes or QuickTime without the whole file stuttering. System Specs: Core i7-920 6GB RAM 80GB Intel SSD 1TB Western Digital Black HDD nVidia GTX 460 768MB Windows 7 64-bit iTunes 10.4.1.10 Quicktime