Different behavior of installer depending on language

Related to my efforts to have a more informative installer message when someone re-runs the same installer (see this thread), I have encountered a language-specific difference that seems fishy.
If I build two installers of the same app, one with English as the installer language and the other with Simplified Chinese as the installer language, I get a different message if I run the English installer after the Chinese one. It refuses to install, and it says: Cannot Install. <appname> Files (higher version already installed)
That is a fairly informative message - more so than the usual "no software will be installed or removed" message that arises when one re-runs the exact same installer. But it does not seem correct.
The strange thing is that nominally the packages are the same version, and the English one was built after the Chinese one, so if there were any auto-incrementing that would not explain it.  A peek at the setup.ini shows near-identical content with a different Package GUID in the [Distribution] section, a differernt [Localization} section and different GUIDs in the [Parts] section.
I'm planning to just ignore the behavior - but I'm a bit uneasy that it is a sign of potential bigger issues.
--Ian
Solved!
Go to Solution.

For some reason, when the versions of the installers are the same, but the installer languages are different, you get the same message that would be displayed if the installed application's version was higher. Note that, in general, if you try to install a different build of the distribution with the same version number, it will proceed with the installation. When the installer language is different, though, it does not install. I've filed a bug report (#323423) to address this inconsistency.
Mert A.
National Instruments

Similar Messages

  • When deleting bookmarks from Firefox, why does the program respond differently on similar installs to different computers all running OS X?

    On the subject of bookmarks...
    The following procedure works for deleting bookmarks on my MacBook Pro, my iMac, and my Mac mini...
    If the bookmark is itself a tab on the toolbar, right click on it and select delete by highlighting delete in the drop down menu that appears.
    The following procedure works for deleting bookmarks on my MacBook Pro, but not my iMac or Mac mini...
    If the toolbar tab is actually a folder containing bookmarks and possibly more folders, left click on the toolbar tab to open a drop down menu of other bookmarks/folders, highlight the one you want to delete, then right click on it and select delete by highlighting delete in the drop down menu.
    On the iMac and Mac mini, right clicking on an item in the drop down menu of bookmarks/folders has no effect. It does not produce the additional drop down menu at all.
    I can find no place to adjust this as a setting in preferences or anywhere else. Can you tell me why I am seeing a different response from the Firefox program on my MacBook Pro than I get from my other Macs?
    All Macs are configured similarly and running OS X 10.6.5. All have Firefox 3.6.13 installed.
    I realize there are many other ways to delete bookmarks from Firefox. My question is not about how to delete bookmarks, but rather why am I seeing the differing behavior from Firefox in other installs. It may well prove to be an issue within OS X rather than Firefox.

    In case you are using "Clear history when Firefox closes" then try to disable this feature.
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [ ] "Clear history when Firefox closes"
    *https://support.mozilla.org/kb/Clear+Recent+History
    Create a new profile as a test to check if your current profile is causing the problem.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Different behavior of movewindow with different windows is (xp or windows 7)

    we have a windows wpf stand alone application which must be integrated within a windows form 2.0 stand alone application. given to the particular implementation of the windows form application we decided to use a light integration trying to change the parent
    handle of the wpf main window setting  as parent the handle of a windows of the windows form 2.0 application.
    in order to reposition the wpf windows on top of the parent windows form window, we have a thread which keeps doing two operations: (1) invoke getwindowsrect on the parent windows form windows to get the parent absolute position and (2) invoke movewindow
    on the wpf main window handle to reposition the window.
    when we move the windows form window, the wpf windows follows the parent remaining in the correct position. we tested this solution with windows xp, windows 7, windows 8 in our office. when we went to the customer to complete the installation, both on a
    windows xp and on a windows 7 the behavior was different. the size of the wpf window was much bigger than the size of the windows form parent window. back in office we found the same strange behavior in windows xp wirtual machine. in order to fix the problem
    (at least partially) we had to change the operation sequence within our code as follows in the monitoring thread: (0) get parent windows position with getwindowrect (1) set the parent of the wpf main window to (null) 0 invoking setparent, (2) invoke the movewindow,
    (3) re set the parent handler of the wpf main window to the handler of the windows form window.
    with last solution it works but clearly there are more flikering when the window is moving or resizing respect to initial implementation.
    any idea about this different behavior of movewindow function? any suggestion?
    thanks
    Paolo

    Hi Paolo,
    You'll need to post it in the dedicated WPF or Windows Forms forum for more efficient responses, where you can contact the experts.
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=wpf WPF forum
    http://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winforms  Windows Forms forum
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SAP 2007A PL 35 Client Installs in Foreign Language (Chezh or Danish)

    Hi All,
    When we install SAP 2007A client on user machines where language settings are English UK, the client installs in foreign language like Czech or Danish or Greek but English.
    Any suggestions will be much appreciated.
    Regards
    Devinder

    Hi Devinder,
    There is no known cause for this behavior, however, there is a way to solve this issue.
    In the Business One folder, in the GUI folder, you could just
    add a ".bak" extension to the Danish and Czech language, then the
    program will automatically take English.
    E.g. like this: SBO_Danish (Denmark).LRF.bak
    please make a back up of your client first.
    Hope this will be helpful.
    Kind regards,
    Willy
    SAP Business One Forums team

  • I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am f

    I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
    What I don't understand is this:  I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine.  Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop.  1) Why did it work before and it's not working now?  2) Is there anything I can do that does not involve reformatting the hard drive?

    It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Mylenium

  • I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

    I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

    Hey iraravitz,
    Could you please let me know what version of OS are working on.
    You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
    So, please try installing on a drive that has been formatted with a supported file system.
    You might refer the KB doc link mentioned below for the same:
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

  • JOIN ON 2 different sets of table depending on the result of first set

    <br>
    I have a query where it returns results. I want to join this query to
    2 different sets of table depending upon the first set has a result or not.
    if first set didnt had a results or records then check for the second set.
    SELECT 
    peo.email_address,
    r.segment1 requistion_num,
    to_char(l.line_num) line_num,
    v.vendor_name supplier, 
    p.CONCATENATED_SEGMENTS category,
    to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
    TO_CHAR(l.need_by_date,'MM/DD/YYYY') need_by_date,
    pe.full_name requestor,
    l.item_description,
    pr.segment1 project_num,
    t.task_number,
    c.segment1,
    c.segment2
    FROM po_requisition_headers_all r,
         po_requisition_lines_all l,  
    (SELECT project_id,task_id,code_combination_id, distribution_id,requisition_line_id,creation_date  FROM
    (SELECT project_id,task_id,code_combination_id,distribution_id,creation_date,requisition_line_id,ROW_NUMBER ()
    OVER (PARTITION BY requisition_line_id ORDER BY requisition_line_id,distribution_id ) rn
    FROM po_req_distributions_all pod) WHERE rn = 1) d,
    gl_code_combinations c,
    POR_CATEGORY_LOV_V p,
    per_people_v7 pe,
    PA_PROJECTS_ALL pr,
    PA_TASKS_ALL_V t,
    ap_vendors_v v,
    WHERE  d.creation_date >= nvl(to_date(:DATE_LAST_CHECKED,
    'DD-MON-YYYY HH24:MI:SS'),SYSDATE-1)
    AND
    l.requisition_header_id = r.requisition_header_id
    AND l.requisition_line_id = d.requisition_line_id
    AND d.code_combination_id = c.code_combination_id
    AND r.APPS_SOURCE_CODE = 'POR'
    AND l.category_id = p.category_id
    AND r.authorization_status IN ('IN PROCESS','PRE-APPROVED','APPROVED')
    AND l.to_person_id = pe.person_id
    AND pr.project_id(+) = d.project_id
    AND t.project_id(+) = d.project_id
    AND t.task_id(+) = d.task_id
    AND v.vendor_id(+) = l.vendor_id
    and r.requisition_header_id in(
    SELECT requisition_header_id FROM po_requisition_lines_all pl                    
    GROUP BY requisition_header_id HAVING SUM(nvl(pl.quantity,0) * nvl(pl.unit_price, 0)) >=100000)
    group by
    peo.email_address,
    r.REQUISITION_HEADER_ID,
    r.segment1 ,
    to_char(l.line_num) ,
    v.vendor_name, 
    p.CONCATENATED_SEGMENTS ,
    to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
    TO_CHAR(l.need_by_date,'MM/DD/YYYY') ,
    pe.full_name ,
    l.item_description,
    c.segment1,
    c.segment2,
    pr.segment1 ,
    t.task_number
    <b>I want to join this query with this first set </b>
    SELECT b.NAME, c.segment1 CO, c.segment2 CC,
              a.org_information2 Commodity_mgr,
              b.organization_id, p.email_address
         FROM hr_organization_information a, hr_all_organization_units b, pay_cost_allocation_keyflex c, per_people_v7 p
        WHERE a.org_information_context = 'Financial Approver Information'
          AND a.organization_id = b.organization_id
           AND b.COST_ALLOCATION_KEYFLEX_ID = c.COST_ALLOCATION_KEYFLEX_ID
           and a.ORG_INFORMATION2 = p.person_id
          AND NVL (b.date_to, SYSDATE + 1) >= SYSDATE
          AND b.date_from <= SYSDATE;
    <b>if this doesnt return any result then i need to join the query with the 2nd set</b>
    select lookup_code, meaning, v.attribute1 company, v.attribute2 cc,
                decode(v.attribute3,null,null,p1.employee_number || '-' || p1.full_name) sbu_controller,
                decode(v.attribute4,null,null,p2.employee_number || '-' || p2.full_name) commodity_mgr
                from fnd_lookup_values_vl v,
                per_people_v7 p1, per_people_v7 p2
                where lookup_type = 'BIO_FIN_APPROVER_INFO'
                  and v.attribute3 = p1.person_id(+)
                and v.attribute4 = p2.person_id(+)
                order by lookup_code
    How do i do it?
    [pre]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    <br>
    I have hard coded the 2 jon sets into one using UNION ALL but if one record exists in both sets how would i diferentiate between the 2 sets.
    COUNT(*) will only give the total records.
    if there r total 14
    suppose first set gives 12 records
    second set gives 4 records.
    But i want only 14 records which could 12 from set 1 and 2 from set 2 since set1  and set2 can have common records.
    SELECT 
    peo.email_address,
    r.segment1 requistion_num,
    to_char(l.line_num) line_num,
    v.vendor_name supplier, 
    p.CONCATENATED_SEGMENTS category,
    to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
    TO_CHAR(l.need_by_date,'MM/DD/YYYY') need_by_date,
    pe.full_name requestor,
    l.item_description,
    pr.segment1 project_num,
    t.task_number,
    c.segment1,
    c.segment2
    FROM po_requisition_headers_all r,
         po_requisition_lines_all l,  
    (SELECT project_id,task_id,code_combination_id, distribution_id,requisition_line_id,creation_date  FROM
    (SELECT project_id,task_id,code_combination_id,distribution_id,creation_date,requisition_line_id,ROW_NUMBER ()
    OVER (PARTITION BY requisition_line_id ORDER BY requisition_line_id,distribution_id ) rn
    FROM po_req_distributions_all pod) WHERE rn = 1) d,
    gl_code_combinations c,
    POR_CATEGORY_LOV_V p,
    per_people_v7 pe,
    PA_PROJECTS_ALL pr,
    PA_TASKS_ALL_V t,
    ap_vendors_v v,
    WHERE  d.creation_date >= nvl(to_date(:DATE_LAST_CHECKED,
    'DD-MON-YYYY HH24:MI:SS'),SYSDATE-1)
    AND
    l.requisition_header_id = r.requisition_header_id
    AND l.requisition_line_id = d.requisition_line_id
    AND d.code_combination_id = c.code_combination_id
    AND r.APPS_SOURCE_CODE = 'POR'
    AND l.category_id = p.category_id
    AND r.authorization_status IN ('IN PROCESS','PRE-APPROVED','APPROVED')
    AND l.to_person_id = pe.person_id
    AND pr.project_id(+) = d.project_id
    AND t.project_id(+) = d.project_id
    AND t.task_id(+) = d.task_id
    AND v.vendor_id(+) = l.vendor_id
    and r.requisition_header_id in(
    SELECT requisition_header_id FROM po_requisition_lines_all pl                    
    GROUP BY requisition_header_id HAVING SUM(nvl(pl.quantity,0) * nvl(pl.unit_price, 0)) >=100000)
    group by
    peo.email_address,
    r.REQUISITION_HEADER_ID,
    r.segment1 ,
    to_char(l.line_num) ,
    v.vendor_name, 
    p.CONCATENATED_SEGMENTS ,
    to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
    TO_CHAR(l.need_by_date,'MM/DD/YYYY') ,
    pe.full_name ,
    l.item_description,
    c.segment1,
    c.segment2,
    pr.segment1 ,
    t.task_number
    UNION ALL
    SELECT 
    r.segment1 requistion_num,
    to_char(l.line_num) line_num,
    v.vendor_name supplier, 
    p.CONCATENATED_SEGMENTS category,
    to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
    TO_CHAR(l.need_by_date,'MM/DD/YYYY') need_by_date,
    pe.full_name requestor,
    l.item_description,
    pr.segment1 project_num,
    t.task_number,
    c.segment1,
    c.segment2
    FROM po_requisition_headers_all r,
         po_requisition_lines_all l,  
    (SELECT project_id,task_id,code_combination_id, distribution_id,requisition_line_id,creation_date  FROM
    (SELECT project_id,task_id,code_combination_id,distribution_id,creation_date,requisition_line_id,ROW_NUMBER ()
    OVER (PARTITION BY requisition_line_id ORDER BY requisition_line_id,distribution_id ) rn
    FROM po_req_distributions_all pod) WHERE rn = 1) d,
    gl_code_combinations c,
    POR_CATEGORY_LOV_V p,
    per_people_v7 pe,
    PA_PROJECTS_ALL pr,
    PA_TASKS_ALL_V t,
    ap_vendors_v v,
    fnd_lookup_values_vl flv,
    per_people_v7 p1,
    per_people_v7 p2
    WHERE  d.creation_date >= nvl(to_date('11-APR-2008',
    'DD-MON-YYYY HH24:MI:SS'),SYSDATE-1)
    AND
    l.requisition_header_id = r.requisition_header_id
    AND l.requisition_line_id = d.requisition_line_id
    AND d.code_combination_id = c.code_combination_id
    AND r.APPS_SOURCE_CODE = 'POR'
    AND l.org_id = 141
    AND l.category_id = p.category_id
    AND r.authorization_status IN ('IN PROCESS','PRE-APPROVED','APPROVED')
    AND l.to_person_id = pe.person_id
    AND pr.project_id(+) = d.project_id
    AND t.project_id(+) = d.project_id
    AND t.task_id(+) = d.task_id
    AND v.vendor_id(+) = l.vendor_id
    AND flv.attribute1=c.segment1
    AND flv.attribute2=c.segment2
    AND flv.lookup_type = 'BIO_FIN_APPROVER_INFO'
    and flv.attribute3 = p1.person_id(+)
    and flv.attribute4 = p2.person_id(+)
    and r.requisition_header_id in(
    SELECT requisition_header_id FROM po_requisition_lines_all pl                    
    GROUP BY requisition_header_id HAVING SUM(nvl(pl.quantity,0) * nvl(pl.unit_price, 0)) >=100000)
    group by
    r.REQUISITION_HEADER_ID,
    r.segment1 ,
    to_char(l.line_num) ,
    v.vendor_name, 
    p.CONCATENATED_SEGMENTS ,
    to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
    TO_CHAR(l.need_by_date,'MM/DD/YYYY') ,
    pe.full_name ,
    l.item_description,
    c.segment1,
    c.segment2,
    pr.segment1 ,
    t.task_number

  • ESS Benefits Generic Enrollment - Different behavior backend v/s portal

    We are using the ESS Benefits generic enrollment service for enrollment kicking off the adjustment reasons on IT 0378.
    Here is the configuration set up, trying to simplify to explain the matter. We are on ECC 6.0 with EHP2.
    1.  Configured one plan type in savings category.
    2.  Within this plan type,  configured 2 plans.
    3.  Configured all other related configuration to set up the 2 plans.
    4. Configured the adjustment reason and the appropriate plan type created in step 2.
    5.  Created the required adjustment reason on 378.
    In HRBEN0001 transaction via backendwe can  see the 2 plans configured within the plan type.
    But when Trying to enroll from ESS - only one plan can be seen for that plan type, the other plan is not shown at all.
    OK - eventually, debugged and found this piece of code in FM HR_BEN_ESS_FILL_SELECTION_DISP.  The 2 different plans are there until this piece of code takes one of them Off...
      CODE -
    3.) Reduce entries to one entry per type and period
      delete adjacent duplicates from selection_display_gt
        comparing pernr
                  barea
                  bpcat
                  pltyp
                  begda
                  sprps.
    CODE -
    This FM is called only for ESS application and not for backed program.
    What we do not understand is why is it behaving differntly on backend v/s portal.
    Any information or experience with this form any one of you will be highly appreciated.
    Thanks.

    Siddharth,
    Thanks for your reply. Yes ESS has its own FMs.  The UI, user exits, BADIs etc are different for backend v/s front end.
    What we are not clear with, is the different behavior in core functionality --  i.e. When the adjustment reason is processed from the backend using HRBEN0001 - The 2 plans within the Plan Type are available for elections. BUT the same adjustment reason for the same penr when processed from  ESS - there is just one plan available for elections.
    It's clear from the code, that it is deleting one plan and this code is within the FM which is called only from ESS.  But we are still not sure why it should behave differently i.e. 2 plans via backend v/s one plan  via ESS. 
    Wanted to see if anyone can share any information if they have a similar benefits set up .. 2 plans within one plan type FOR savings plan category and then having a adjustment reason set up.
    Regards.

  • Best way to load CSS depending on language

    What's the best way to load CSS depending on user language? If I am making a publishing site with 2 languages then how do I load particular CSS depending on language?
    I know one way to use is to use javascript (jquery) but I was thinking if there is a better way to do that?

    <SharePoint:CssRegistration name=”<% $SPUrl:/_layouts/projectname/styles/~language/master.css
    %>” runat=”server”/>
    http://lionadi.wordpress.com/2013/04/30/sharepoint-language-specific-css-loading/
    http://sharepoint.stackexchange.com/questions/54698/how-to-specify-which-css-files-to-load-in-sharepointcsslink-when-using-themes
    http://stackoverflow.com/questions/858990/how-can-i-target-css-to-a-particular-sharepoint-page-layout-file
    asp:Content ContentPlaceholderID="PlaceHolderAdditionalPageHead" runat="server">
    <link id="Link1" href="<% $SPUrl:~SiteCollection/Style Library/mystyle.css%>" runat="server" type="text/css" rel="stylesheet" />
    <SharePoint:ScriptLink id="jQueryCore" language="javascript" name="ui.core.js" runat="server"/>
    </asp:Content>

  • Different behavior with decimal data on same version of CF

    I have a linux/apache/mysql/CF MX 7 Enterprise server. I insert decimal data using the cfqueryparam that looks like
    <cfqueryparam value="#BudgetSet.BUD_SET_DETAIL_COST_PER#" CFSQLType="CF_SQL_DECIMAL">.
    No problems the decimal data does not get rounded, 123.45 inserts as 123.45.
    I'm building applications for my neighborhood association, so I'm having godaddy.com host the web site with CF and MySQL.
    Like a good developer, I took code from my CF server, moved some of the more useful programs to the godaddy.com, set up the database and started testing some apps. Now any decimal data inserted gets rounded using the same cfqueryparam syntax from my CF server (like above). The decimal data on the godaaddy.com inserts as 123.00, when I'm trying to insert 123.45, of course if I insert 123.99 I get 124.00, rounding. So I called godaddy.com and of course I get the standard technical answer "its your code". So off to testing I go. Only to determine, by not using the cfqueryparam, I could stop the rounding, more testing I determined that I need to use
    <cfqueryparam value="#BudgetSet.BUD_SET_DETAIL_COST_PER#" CFSQLType="CF_SQL_MONEY"> or
    <cfqueryparam value="#BudgetSet.BUD_SET_DETAIL_COST_PER#" CFSQLType="CF_SQL_DECIMAL" scale="2">. The version of CF @ godaddy.com is also MX 7 Enterprise. Finally the question, what in configuration could cause such different behavior ?
    Thanks for reading my short novel.

    The database drivers determine how the cfqueryparam values are
    interpreted (behind the scenes ColdFusion generates a prepared
    statement using the driver interface and sets the values using
    standard JDBC calls). Unfortunately, like you found out, not all
    drivers are created equal and have slightly different behavior or
    defaults.
    I would check and compare the driver versions.
    Mack

  • CS6 installer in Ukrainian language

    Turned Adobe site and all of download assistants, application managers and download sections upside down, but couldn't find Creative Suite CS6 installer in Ukrainian language.
    When I try to use application manager / Download Assistant - it gives me Russian language installers of separate products (but not the Creative Suite package) in russian language, when I try to install doesn't accept my ordered license:
    Adobe Design Std CS6 6.0 MLP AOO License UKR (65163306).
    Is there anybody, can help me with that?
    I ordered mentioned license, but noone can tell me where I can get a proper installer. :-(

    Silgan-UKR1 your download for your volume license will be located at https://licensing.adobe.com/.  If your e-mail address does not have access then please contact your I.T. or purchasing department to gain access.

  • Different behavior for index

    Hi.
      I have the table inl_allocations with following index:
    CREATE INDEX inl_allocations_n1 ON inl_allocations
      ( ship_header_id                  ASC,
        adjustment_num                  ASC,
        ship_line_id                    ASC )
    When running query below, we have different behaviors for indexes in different DB:
    SELECT *
      FROM INL_ALLOCATIONS CA, INL_SHIP_LINES_ALL CC
      WHERE CC.SHIP_LINE_ID = CA.SHIP_LINE_ID
      AND CC.SHIP_HEADER_ID = CA.SHIP_HEADER_ID
    1- For DB 1 (11.2.0.1.0) the explain plan for query:
                    (3)  INDEX INDEX FULL SCAN INL.INL_ALLOCATIONS_N1  [Analyzed]
                        Est. Rows: 33  Cost: 1
    2- For DB2 (11.2.0.3.0) the explain plan for query does not use the index INL_ALLOCATIONS_N1, and we have a FULL in table.
               (3)  TABLE TABLE ACCESS FULL INL.INL_ALLOCATIONS  [Analyzed]
               (3)   Blocks: 13 Est. Rows: 167 of 269  Cost: 5
    We would like to know the reason why there are differences between both environments.
    Thanks and Regards.

    many years ago Oracle used to optimize queries with a set of rules that ranked the potential access paths and finally chosed the possible operation with the highest rank. So for two systems with the same DDL Oracle would have generated the same plan. This was the rule based optimizer (RBO) and its shady ghost still dwells somewhere deep in the Oracle code. Since at least Oracle 8i (> 10 years ago) the standard optimization engine is the cost based optimizer (CBO) which uses statistics to generate execution plans: and if the data of your systems is different (or even if the data is identic but its physical order is different and changes the index clustering factor) the CBO can and will generate different plans and use or not use existing indexes.
    Regards
    Martin

  • Assigning different behaviors to instances of a symbol

    Hello all ,I want to assign different behavior (action
    script) to different instances of (a) symbole ,what should I do?I
    appreciate you .Sincerely Mohsena

    yes it works ,thank you very much for your attention!
    sincerely yours Mohsena

  • Could JavaFX Scene Builder installation depend on JRE_HOME setting?

    Hello,
    I have no privilege to install software in company computer so I copied Jre7u3 (Java Runtime 7 Update 3 ) folder from home to the company and set JRE_HOME for user variable. It still shows following info when installing Scene Builder.
    No Suitable 32-bit Java Runtime Enviroment (JRE) has been found.
    You should install:
    - Java 6 Update 29 (32-bit) or above
    OR
    - Java 7 Update 2 (32-bit) or above
    Could JavaFX Scene Builder installation depend on JRE_HOME setting or any other solutions exit for this issue? Thanks.

    Surprising. Your hardware should run Scene Builder without any trouble.
    With Java 7 U5 I run SceneBuilder 1.0 b44 on Win XP 32-bit and 1 G of RAM, with -Xmx1024m.
    Aren't you facing an issue with Java ? do you run successfully other Java applications of a comparable size ?
    You may also download the Scene Builder samples: according you've Ant and FX handy you can run them command line.
    For what is about removing or modifying the -Xmx option the answer is no, this can't be done in this release.
    Regards

  • RDCMan different behavior for different machines

    I'm using Remote Desktop Connection Manager, which has been very useful since I have to remote into so many different machines.
    I am curious though and this is more of a question than a problem, but I notice different behavior remoting into different systems.
    On some servers, I get this popup when I connect:
    On other servers, I get brought to this screen to enter my password:
    I've checked the group policy settings, registry settings, made sure I didn't have any saved credentials, makes no difference.
    Any idea why?

    RDP Session Setting:
    Console Session Settings:
    Hi,
    As per my research, that is the default behavior and it correlates for 2 different scenario “Console and RDP”. When you are performing “Console” of server then it will provide you the direct screen of server to login. But when you want to take RDP
    then it will ask you as “Windows Security” login prompt.
    Please check my words on your screenshots
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for