Different BOM for each month
Hi,
The BOM is different for each month. If i make different alternatives for each month and run the LTP will it help to get the raw material requirement as per the BOM for that month. Example BOM for NOV/DEC will be not same but we want to estimate the raw material req for next year.
Kindly advise what i need to do?
Regards
ShankarR
Dear Shankar,
1.What is the business contraint in using change number functionality to address this requirement without creating any
additional alternative BOM?
2.Say you create the first alternative BOM using a change number and save all the BOM components.
3.The default valid from date will be the valid from date of the change number and valid to date will be 31.12.9999.
4.Whenever there is a BOM change use a different change number with valid from date say 25.10.2010,so using this in the
same BOM delete the components and add the new component's or make any BOM change and save.
5.For the deleted components the valid from date will be say (you have created using today's date for BOM creation)
05.10.2010 and the valid to date will be 25.10.2010.
6.What is the advantage of creating new alternative BOM?
6.How are you using the LTP results for inventory purpose,say how are you planning the raw material's requirement for the
next year based on this year's BOM?
7.LTP is not only the feasibility of material procurement,but also production that can be produced with available resource.
Check and revert
Regards
S Mangalraj
Similar Messages
-
Year Duplicated For Each Month
Hey everyone,
I am using Oracle Business Intelligence 11.1.1.6.2 currently and I have just tried to create a report, but there is a problem.
I drag & drop the year column from the Subject Area section to the right. Instead of getting:
2005
2006
2007
I get 2005 twelve times, 2006, another twelve times, etc. as if the second column shows the months. The only column I have selected from the subject area is the year column, however. There is nothing else.
Any ideas on what may be causing this? Trying different browsers didn't work.
Best Regards,
CihanBefore I try your suggestions, I have found some sort of workaround for this:
I go to Column Properties, then select Column Format. Value Suppression -> Suppress
With this selected, each year appears just once, not twelve times (once for each month).
My Fact table is joined to the Dimension table with this statement:
"YK_DISCREPANCY".""."DW"."DIM_MONTH"."MONTH" = "YK_DISCREPANCY".""."DW"."FACT_DISCREPANCY_DETAIL"."MONTH_DISCREPANCY" AND "YK_DISCREPANCY".""."DW"."DIM_MONTH"."YEAR" = "YK_DISCREPANCY".""."DW"."FACT_DISCREPANCY_DETAIL"."YEAR_DISCREPANCY"
This is most likely the reason, right?
BR -
Different restrictions for each columns
I would like to restrict each column in a standard report with different value, without using global filter.
For Ex. I have a measure field called Amount. I would like to have 12 columns namely Jan, Feb etc... and then I would like to restrict each column with Month and I need to get the data for that particular month in the column.
In this case I cant use cross tab report because crosstab doesnt support some of the features of SAP datasource at this point of time. I can create measures in SAP datasource with restriction. But performance of the query will be affected.
In case of Web Intelligence we can create a formula with where clause for each of the column. But such thing i couldnt find in crystal report.
I need experts help here.
I appreciate your help.
Thanks
RaghuFor January you would have the following
if month(yourdatefield) = 1 then
youramountfield
else
0
For February you would have the following
if month(yourdatefield) = 2 then
amount
else
0
continue on for each month. then place these fields across the report in the detail. Now for each record the value will go into the correct month column. Then you can suppress the detail section and summarize the total for each month if you want. -
I have 3 iphones, an ipod touch and an Ipad on the same itunes account. should I have a different account for each device? If so how do I get all my purchases, like music on all the devices?
You can sync as many devices as you want to the same iTunes account, there is no limit. You can have the same content on each device or different content, the choice is yours. iTunes will keep everything straight, by device, including separate backups. I'd suggest giving each device a unique name, to make things easier.
-
I have multiple emails, how do I add different signatures for each email address
I have multiple emails for different companies I work for, how do I add a different signature for each one, it seems like I have to use the same one for all of them
Thanks. I think I'm on the right track. I added the email address to my contacts and double clicked the image icon to change it, but it only lets me snap a new picture or select an image from another location. What is the folder location of the stock icons that come with Mac OSX?
-
How to use the different class for each screen as well as function.
Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
'Class objects
'UI and Di objects
Dim objForm As SAPbouiCOM.Form
'Variables
Dim strQuery As String
#End Region
#Region "Methods"
Private Function GeRate() As Double
Return Double
End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
If pVal.BeforeAction = True Then
If pVal.MenuUID = "ENV_Menu_MIB" Then
End If
Else ' Before Action False
End If
End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM -
How to configure different listener for each database in 11gR2 RAC
Hi Friends,
Current Prod Setup :
11gR2 (11.2..0.2) RAC on RHEL 5.5 with 3 SCAN Listeners on default 1521 port.
Having 4 databases which are using SCAN-IP and listening on default port only.
As per policy, we have to create separate listeners (on different port) for each database.
like,
DB1 - 1522
DB2 - 1523
DB3 - 1524
DB4 - 1525
Even If I configure 4 listeners using NETCA, how my failover & load balancing will happen using SCAN & Newly Created Listeners ???
Thanks in advance..
Regards,
ManishHi,
I tried on 11gR2 TEST RAC Server to have different listener with different port (1529) for SCAN & Node Listener & tested failover, load-balancing which was successful.
[oracle@ravish5 admin]$ cat listener.ora
LISTENER_A=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_A=ON # line added by Agent
[oracle@ravish5 admin]$ ps -ef | grep lsnr
oracle 1985 1 0 00:46 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER -inherit
oracle 1988 1 0 00:46 ? 00:00:00 /11g_database/11.2.0.2/product/home_1/bin/tnslsnr LISTENER_A -inherit
oracle 2928 1 0 01:00 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER_SCAN1 -inherit
[oracle@ravish5 admin]$ lsnrctl status LISTENER_A
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 02-MAY-2012 03:19:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))
STATUS of the LISTENER
Alias LISTENER_A
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-MAY-2012 00:46:42
Uptime 0 days 2 hr. 32 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /11g_database/11.2.0.2/product/home_1/network/admin/listener.ora
Listener Log File /11g_database/11.2.0.2/diag/tnslsnr/ravish5/listener_a/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_A)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.5)(PORT=1529)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.16)(PORT=1529)))
Services Summary...
Service "TEST" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "TESTXDB" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "srvc_test.clover.com" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter listen
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=192.
168.3.16)(PORT=1529))))
remote_listener string ravish-scan:1529
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
[oracle@ravish5 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521,1529
[oracle@ravish5 admin]$ srvctl config scan
SCAN name: ravish-scan, Network: 1/192.168.3.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /ravish-scan.clover.com/192.168.3.22
[oracle@ravish5 admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
Name: LISTENER_A
Network: 1, Owner: oracle
Home: /11g_database/11.2.0.2/product/home_1
End points: TCP:1529
[oracle@ravish5 admin]$ srvctl config service -d TEST -s srvc_test.clover.com
Service name: srvc_test.clover.com
Service is enabled
Server pool: TEST_srvc_test.clover.com
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: true
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: TEST1,TEST2
Available instances:
TEST_NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ravish-scan.clover.com)(PORT = 1529))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = srvc_test.clover.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Actually different ports for different databases are required to have separation of duties. Once Firewall enabled betwen Client & DB Server only privileged users would have access to particular database.
Regards,
Manish -
How to set up different realms for each server ?
I am using weblogic 6 sp1.I have a domain with several servers. i want to assoicate or use different custom security realm for each server.However -on weblogic console- there is no 'Target' tab in the Security node ,and no way to set up multiple Security nodes.How ca i do this (or can i)?
Main reason why is this:
Imagine situation I have 2 servers A and B both of them bellongs to domain SomeDomain.
Server A is as WebServer and server B hosts all EJBs. And server A is outside
firewall (does not have DB access). But i would like to use RDBMS realm so what
to do in this situation. Place both servers in different domains and in server
A install proxy realm for RDBS realm ?
"Tom Moreau" <[email protected]> wrote:
>
You can't have a different realm for each
server. There is only one realm for all
servers - think of it as there is only
one set of authentication & authorization
information (that is users/groups/permissions)
and it applies to all servers.
Why do you want each server to have its
own realm? If someone tries to log in,
do you want WLS to automatically route
them to a server who is capable of logging
them in? I'm having trouble understanding
why you want this feature.
Thanks,
-Tom Moreau
Rachel <[email protected]> wrote:
I am using weblogic 6 sp1.I have a domain with several servers. i want
to assoicate or use different custom security realm for each server.However
-on weblogic console- there is no 'Target' tab in the Security node
,and no way to set up multiple Security nodes.How ca i do this (or can
i)? -
MDX to dynamically create period to date for each month of current year
I need some help with MDX. I am not even sure if this is possible to do but here is what I need. Any help is greatly appreciated.
I have a Date dimension with a hierarchy defined as Year-Qtr-Month-Date
I have a measure called Rentals
Assume the current date is 10/24/2014. I want to display by month for the year 2014, the sum of rentals equivalent to the current MTD. So January would sum 1/1 thru 1/24. February would sum 2/1 thru 2/24. March would sum 3/1 thru
3/24, etc.
On the end of the current month, all months would display the sum of the whole month. I am not concerned if a month ends on the 30th or 31st. The end is end.
It needs to be dynamic enough so that if the current date is the 27th, each month would sum from the 1st to the 27th.Hi Rocko,
According to your description, you want to compare the sum amount of rentals for each month, right?
In MDX, we can use
PARALLELPERIOD function returns a member from a prior period in the same relative position as a specified member. So you can use the query like
with set Period as {[Arrival Date].[Date].[Month].&[2014]&[1]:[Arrival Date].[Date].[Month].&[2014]&[27]}
member [Arrival Date].[Date].[0] as sum({Period})
member [Total Amount N-1] as (PARALLELPERIOD([Arrival Date].[Date].[Month], 1, [Arrival Date].[Date].[Year].&[11]), [Measures].[Total Amount])
Here is a sample query on AdventureWorks cube.
SELECT ParallelPeriod ([Date].[Calendar].[Calendar Semester]
, 3
, [Date].[Calendar].[Month].[October 2003])
ON 0
FROM [Adventure Works]
Regads,
Charlie Liao
TechNet Community Support -
Qry:How to get different price for each price list (variable area) in order
1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen -
How to apply Date condition for each month in 12 month period to my SQL query
I am trying to retrieve all Outstanding Problem tickets in my Trendline SSRS report.
I need to pull the OpenDate <= Last day of last month And CloseDate >= 1st day of current month
for each month in the Last 12 months. How do I accomplish this in my query?
I must also need to pull the oustanding tickets for the next 11 months in the same query
where it will automatically pull the outstanding tickets for when a new month comes
in out of the 12 month period?
Here's a sample of my query to pull July 2013 Outstanding Problem tickets:
Select OpenDate, CloseDate, Ref_Num, Type, status
From Call_Req
Where OpenDate <= '2013-07-31 00:00:00' And CloseDate >= '2013-08-01 00:00:00'
And Type = 'P'
My Results:
OpenDate
CloseDate
Ref_Num
Type
status
6/13/2013 7:41
8/26/2013 12:41
P1726456FY13
P
CL
6/13/2013 8:17
8/23/2013 12:31
P1726612FY13
P
CL
6/13/2013 10:17
9/6/2013 16:54
P1727352FY13
P
CL
7/12/2013 10:46
9/6/2013 10:23
P1812568FY13
P
CL
7/18/2013 10:17
9/6/2013 8:53
P1830452FY13
P
CL
7/29/2013 15:54
9/6/2013 16:16
P1862906FY13
P
CL
5/17/2013 20:51
8/22/2013 9:09
P1653380FY13
P
CL
5/30/2013 13:29
8/26/2013 7:33
P1685693FY13
P
CL
7/15/2013 14:14
9/7/2013 9:42
P1818874FY13
P
CL
6/7/2013 15:49
9/6/2013 16:46
P1712265FY13
P
CL
7/18/2013 10:25
9/7/2013 9:18
P1830516FY13
P
CL
7/24/2013 16:30
8/12/2013 18:26
P1849909FY13
P
CL
Talitha DavisWould this Work?
DECLARE @now DATE = GETDATE();
WITH months(lvl, daydate)
AS (
SELECT
1,
@now
UNION ALL
SELECT
lvl + 1,
DATEADD(MONTH, -1, daydate)
FROM months
WHERE lvl < 12
), dateranges(period, opendate, closedate)
AS (
SELECT
CAST(YEAR(daydate) AS CHAR(4))
+ '-'
+ RIGHT('0' + CAST(MONTH(daydate) AS varCHAR(2)), 2),
DATEADD(DAY, 0-DAY(daydate), daydate),
DATEADD(DAY, 1-DAY(daydate), daydate)
FROM months
SELECT
b.period,
a.OpenDate,
a.CloseDate,
a.Ref_Num,
a.Type,
a.status
From Call_Req a
INNER JOIN dateranges b
ON
a.OpenDate <= b.opendate
AND
a.CloseDate >= b.closedate
WHERE Type = 'P';
Microsoft Certified Trainer & MVP on SQL Server
Please "Propose as Answer" if you got an answer on your question, and vote for it as helpful to help other user's find a solution on a similar question quicker. -
Different chart for each level hierarchy in report designer
Is there a way to display a different chart for each level of the hierarchy in a report designer? I want a different chart for each level. That is, if there are 5 nodes in level 4, I want 5 different nodes. Is there a way to do this? I tried to insert the chart inside a cell in each level, but it shows the same chart for all nodes instead of a different chart for each node.
Has any one tried using a context sensitive chart? According to this, it seems like this should be possible, but I am having no luck.
http://help.sap.com/saphelp_nw70/helpdata/en/47/a99a0a5fdb0985e10000000a42189c/frameset.htm -
Urgent !!Report Fiscal year for each Month i.e.12mnths
Hi All,
I have a cube with following details.
1.Revenue Value ==1200
2.Fiscal year==2007
3.Product type==A
But If i need to create a Dashboard Report with this Cube,
But it has display tht Fiscal Year Value 2000 for each month
Like ..KF=1200/12(months)
So i need display as follows for the graph...
MONTH JAN FEB MAR...............................DEC
REVENUE 100 100 100...................................100
THIS IS HOW MY REPORT SHLD BE EXECUTED..
But I dont have any date or month field in my cube,how can I get it for Each month as above..??????
Can any one explain me & suggest me how to proceed..???
Thnx
BI LearnerHi Voodi,
That is the only solution... which i have in my mind...Let me try it out & get back to u..
But as well I have another KF under that Revenue which display for each month & we need to run a dashboard with line diagram where one line for Revenue & another for PO which shld give a comparison for all the months...
Does this work out??
Thanks a lot for ur ideas. -
Different caption for each photo in web gallery
When you take your selected Photos from Library to WEB is it possible to have a different caption for each photo. If I select 1 photo from the import and change its caption using the caption popup in the "Image Info" pane all the image captions change even the unselected ones.
How can I change individual photos so that they will have individual captions in the web gallery?You should change the caption metadata field in the Library module. Go to the Library module, select the image you want to change the caption on, in the right panel, scroll down to the metadata section. Make sure that the popup to the left of metadata is set to "default" and you should see the standard metadata. Simply type your caption here. Then, if you've done this for all your photos, go back to your web section and make sure you set the caption popup in the image info section back to "caption", which will use the info in the caption metadata field for each photo automatically.
-
Drop Down List in a table - different options for each row
How can i have a drop down list in a table with different options for each row?
My requirement is this.. I want to display, say employee dtails in a table, and one column is employee hobbies, whcih can have multiple values and each employee may have a different list of hobbies. So how can we populate the drop down for each row, with different options?Hey. Uh, this probably isn't the answer you were looking for, but it sounds like you've got a problem with your database design there. Generally speaking, your tables shouldn't have multi-valued fields, in the relational model anyway (sql). Instead, you should look at adding a separate table like EMPLOYEE_HOBBIES. Then you have a foreign key using the employees primary key as the foreign key in the employee_hobbies table, see what I mean? I might have misunderstood your explanation though, I'm not sure.
Alternatively, you could just have hobbies as a big freeform varchar field, and don't bother to make people separate their hobbies into different fields (you'd have to abandon the drop-down listbox idea in this case). If there's no really important reason to make the distinction, then it's probably easier just to not do it.
Maybe you are looking for
-
Hello, I'm a Creative Cloud subscriber with all adobe apps and since 2 months, I can't update any apps. I've already tried the solution of uninsatlling / install Creative Cloud and also one of the apps (I unstalled / install Adobe Indesign) and I've
-
Load XML with flashvars?
Hey folks I have a flash photo gallery that uses XML to tell the flash what pics to load in and display. Works really great but I want to take it a step further and be able to specify the xml file being loaded from HTML. I guess using Flashvars unles
-
Transaction log usage grows due to replication even if I don't use replication at all
Hi The transaction log usage keeps growing a lot on my user database since few days back. the database is in full recovery model and I do transaction log backups every 10 minutes. The DB was part of Database Mirroring but I removed it. The usage was
-
How to invoke a shell script using java
Hi I am trying to invoke a shell script(unix) using java and I have tryied to load the shell using exec(cmd) and then trying to execute the shell. But it is not working. Can you please guide me on this matter.
-
How can i upgrade my powerpc g5 from OS X 10.4 to 10.5?
I have an iMac PowerPC G5 (3.0) with a processor of 1.9 GHz, 512 MB of memory, PowerMac 12,1, I´m currentrly using OS X 10.4.11. Does anyone knows if this kind of Mac can be upgrate it ? what should I do?