Different programs output to different ports (x-fi fatal1
I am using?a Sound Blaster X-Fi Fatalty and I am in love with it. One thing I would like to see though is this. I am using my IO port that came with my card. I have speakers plugged into the IO port. I have a headset plugged into the back. The headset is plugged into both the rear headphone and microphone port. What I would like to be able to do, is have all my programs, such as Itunes and games play through my speakers but not my headset. I want programs such as ventrilo, teamspeak, etc. to only play and record through my headset. Is this currently possible, and if not, can we expect it in future drivers/firmware?
Well, the issue may or may not be the result of a bad install CD, it could be an issue on your computer preventing the CD from installing properly. That would be something to bring up with Support as they may be able to help you without you needing a new CD.
Dale
Similar Messages
-
Problem when we created the managed server to configure different ports.
I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world.
So that only admin can access admin console using admin port.
And out side clients can access my webapplication using different port.
For this i have created the managed server in weblogic.and I deployed the application on managed server.
Now admin server is running on 8001 port and my Communication Service application is running on 7001 port.
But when I tried to configure MBeans related to myCommunicationServiceApplication those were disapper on admin console. And the other wlng services are appearing on admin console.
1. Since my application deployed on managed server MBeans registration happened from myapplication hence it’s disappear on admin console.
Now If I want to configure Mbeans (related to my communication service) how can I configure it?
2. My communication service using configurationStore module and other wlng services.
When I tried to start my application on managed server I got the below error:
<Apr 28, 2009 12:22:44 PM IST> <Error> <Deployer> <BEA-149231> <dscp11166.TechMahindra.com> <Unable to set the activation state to true for the application 'wlng_nt_qualcomm_active_mediation [Version=1.0]'.
com.bea.wlcp.wlng.api.storage.configuration.ConfigurationException: Configuration store module is not available.
3. I tried to target all wlngResources to manged server by editing config.xml file.
Then all wlng services disappears on admin console. If this is the case how can I configure container/account services on wlng?
I have created the Basicweblogic domain.
Below is the config.xml for reference.
"QualcommServer" is managed server name.
Can any one please suggest me how to configure this kind of scenarios?
<server>
<name>AdminServer</name>
<machine>new_Machine_1</machine>
<listen-port>8001</listen-port>
<default-iiop-user>weblogic</default-iiop-user>
<default-iiop-password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</default-iiop-password-encrypted>
<listen-address>localhost</listen-address>
</server>
<server>
<name>QualcommServer</name>
<machine>new_Machine_1</machine>
<listen-address>localhost</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>C:\Program Files\Java\jdk1.6.0</java-home>
<class-path>C:\bea\wlng400\server\lib\weblogic.jar;C:\bea\wlng_pds400\lib\wlng\wlng.jar</class-path>
<bea-home>C:\bea</bea-home>
<username>weblogic</username>
<password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>managedserver</name>
<credential-encrypted>{3DES}9q80YuFJueVVJxoWduJA1OGhbqk14EpgQWWyTrzlmxo=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<app-deployment>
<name>wlng_nt_session#4.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_nt_session.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>interceptors</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/interceptors.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_prm</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_prm.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_nt_qualcomm_active_mediation#1.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>servers\AdminServer\upload\wlng_nt_qualcomm_active_mediation.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>new_Machine_1</name>
<node-manager>
<name>new_Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>JMSServer-AdminServer</name>
<target>AdminServer</target>
</jms-server>
<jms-system-resource>
<name>WLNGJMSResource</name>
<target>QualcommServer</target>
<descriptor-file-name>jms/wlng-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>networktier</name>
<target>AdminServer</target>
<descriptor-file-name>custom/nt.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngTierResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngTierBean</descriptor-bean-class>
</custom-resource>
<custom-resource>
<name>wlng-edr</name>
<target>AdminServer</target>
<descriptor-file-name>custom/wlng-edr.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngEdrResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngEdrBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>wlng.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>wlng.localTX.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-localTX-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Thanks,
Srinu Babu PDear Nariharan,
Today I faced a simlar issue, and this SAP Note helped me fix it: 1966807 - Duplication of AET table records in change processing
In my case, cardinality of AET table was 1:1, and I was getting duplicate PARENT_ID every time when trying to create a subsequent service request for my activity.
Regards,
Andrew -
Please help me creating a new listener with different port#.
I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done. -
How to configure SMTP on a different port?
Hi All,
We have just moved one of our BO servers to a cloud based environment and the exchange server in our new environment uses a different port instead of the default port 25.
Though we have configured all job servers in CMC to use the new port the error message we get when we schedule a report still indicates we are using port 25. Is there like a conifuration file or xml where we need to update this? If not, is there any other way to configure email destination on a different port?
We are using BO XI 3.1 SP3, MySQL repositiry, Tomcat server.
Error message we get:
server error. [Error initializing SMTP server. Return code: [TCP send failed.]. Reason: [X.Y.Z.A:25].]: [CrystalEnterprise.Smtp]
Thanks in advance...
Thanks,
Hari...Thanks for the reply. Here is my situation explained.
We have a few WebI reports that need to be scheduled as Excel and PDF on a regular basis[weekly] to few users. These schedules work fine in our test environment where the Mail server is configured on port 25. However in our production enviornment , Mail server is configured on a different port. What I can confirm is that the port is open and if I try emailing through command prompt, I can connect the exchange server and send emails.
I have changed the setting on all Job servers [Adaptive Job Server, CrystalReports Job Server, DeskI Job Server, Destinaton Job Server, LOV Job Server, Program Job Server and Publication Job server], but still the email schedules fail and I am confused because the failure message [as in my first post] says it failed over port 25. Where is it still picking up Port 25 from though I have changed the confiuration on all Job servers?
Any guidance will be greatly appreciated. -
Split outbound ORDERS idoc to different ports
Hi All,
I was wondering whether it is possible to split an outbound ORDERS idoc and have it directed to two different ports based on document type? Client requires normal PO's to be written to one XML while STO's be written to a seperate file. Look forward to your responses.
Regards,
JohnHi,
These are the exits available for Outbound ORDERS idoc.
1. ORDERS Purchase order / order MM06E001 EXIT_SAPLEINM_001 Customer enhancements
for control
record: purchasing
document, outbound
2. ORDERS Purchase order / order MM06E001 EXIT_SAPLEINM_002 Customer enhancements
to data segments,
purchasing
document, outbound
3.ORDERS Purchase order / order MM06E001 EXIT_SAPLEINM_011 Final customer enhancement
EDI purchase
order outbound
You should create the project before implementing the exits. So that the break point is going to stop over there.
Check this link to know how to find BADI -
http://www.sap-img.com/abap/how-to-find-bapi-for-particular-transaction-in-sap.htm
In your case this BADI is there for the given program. -
i already have Apache on my computer and it is on port 80. I
am pretty sure you cant install two server programs on the same
port, but it says on places on the adobe to website to not change
the port unless you know what you are doing (which I don't at this
point). Why shouldn't I? What would I need to do differently?
Thanks!If FMS isn't bound to port 80, then users behind strict
firewalls may not be able to connect to your FMS. The Flashplayer
will try port 1935 first, then port 80.
You are correct that you can't bind two devices to the same
port, but that only applies if you're trying to do it on a single
IP. If you add another IP address to your NIC, then you have two
port 80's. That would allow you to bind Apache to one IP, and FMS
to the other IP, allowing both to have access to port 80.
In the end, if you're not worried about users who can't get
through on port 1935, then there's no reason to bind to it. Just
take port 80 out of the hostport list. -
OHS not able to redirect to two different ports of the same managed server
Hi
I need to redirect to different ports of the same managed server (say M1, M2) based on the availability of the managed server. ie when managed server M1 is busy handling other requests i need to redirect my new request to M2. i already have this mechanism to find out which managed server is free.
so now the problem is if M2 is free how would i tell ohs to redirect it to M2 server??
M1,M2 both managed servers are hosted at host1.example.com.
M1 port - 8001
M2 port - 8003
my context root is /YpsSupplyPlanningEngineService/supplyPlanningEngineService
my mod_wl_ohs.conf is defined as:
<Location /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService>
SetHandler weblogic-handler
PathTrim /M1
WebLogicHost host1.example.com
WebLogicPort 8001
</Location>
<Location /M2/YpsSupplyPlanningEngineService/supplyPlanningEngineService>
SetHandler weblogic-handler
PathTrim /M2
WebLogicHost host1.example.com
WebLogicPort 8003
</Location>
when i type the url in browser as "http://<ohs_server_url>:7777/M2/YpsSupplyPlanningEngineService/supplyPlanningEngineService"
This is not working. Is there any way to do it?
Please help me here.
Thanks in advance.
Edited by: 925137 on Jul 5, 2012 2:03 AMHi Anon
thanks for replying..
Chnage from /M1 to M1 didnt work.
then I set debug ALL and set WLLogFile to full path
the log i received when i queried for request is:
2012-07-05T17:04:18.5774+05:30 ================New Request: [GET /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL HTTP/1.1] =================
2012-07-05T17:04:18.5774+05:30 Using Uri /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService
2012-07-05T17:04:18.5774+05:30 After trimming path: '/YpsSupplyPlanningEngineService/supplyPlanningEngineService'
*2012-07-05T17:04:18.5774+05:30 The final request string is '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL'*
2012-07-05T17:04:18.5774+05:30 SEARCHING id=[host1.example.com:8001] from current ID=[host1.example.com.com:8001]
2012-07-05T17:04:18.5775+05:30 The two ids matched
2012-07-05T17:04:18.5775+05:30 @@@FOUND...id=[host1.example.com.com:8001], server_name=[host1.example.com.com], server_port=[7777]
2012-07-05T17:04:18.5775+05:30 attempt #0 out of a max of 5
2012-07-05T17:04:18.5775+05:30 keepAlive = 1, canRecycle = 1
2012-07-05T17:04:18.5775+05:30 Trying a pooled connection for 'xxx.xxx.xxx.xxx/8001/8001'
2012-07-05T17:04:18.5775+05:30 getPooledConn: found a host and port/securePort match
2012-07-05T17:04:18.5775+05:30 getPooledConn: No more connections in the pool for Host[xxx.xxx.xxx.xxx] Port[8001] SecurePort[8001]
2012-07-05T17:04:18.5775+05:30 general list: trying connect to 'xxx.xxx.xxx.xxx'/8001/8001 at line 2372 for '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL'
2012-07-05T17:04:18.5776+05:30 URL::Connect: Connected successfully
2012-07-05T17:04:18.5776+05:30 SSL is not configured for this connection
2012-07-05T17:04:18.5776+05:30 Local Port of the socket is 7812
2012-07-05T17:04:18.5776+05:30 Remote Host xxx.xxx.xxx.xxx Remote Port 7812
2012-07-05T17:04:18.5776+05:30 general list: created a new connection to 'xxx.xxx.xxx.xxx'/8001 for '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL', Local port:7812
2012-07-05T17:04:18.5776+05:30 Entering method BaseProxy::sendRequest
2012-07-05T17:04:18.5776+05:30 Entering method BaseProxy::parse_headers
2012-07-05T17:04:18.5776+05:30 No of headers =5
2012-07-05T17:04:18.5776+05:30 Header from client:[User-Agent]=[Java/1.6.0_11]
2012-07-05T17:04:18.5776+05:30 Header from client:[Host]=[host1.example.com:7777]
2012-07-05T17:04:18.5776+05:30 Header from client:[Accept]=[text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2]
2012-07-05T17:04:18.5776+05:30 Header from client:[Connection]=[keep-alive]
2012-07-05T17:04:18.5776+05:30 Header from client:[ECID-Context]=[1.004l1E7Cv6mESOGLMy^Aye0007Kd00000E;kXjE1ZDLIPHUjDHCj9KSnJLTkGSRtGKRXUQRdURP5URPdUPPJLQSqPRO_VBSpGSSgPSKgHQRiPQRbLIRbPQR_JLPmMTQZLO]
2012-07-05T17:04:18.5776+05:30 Exiting method BaseProxy::parse_headers
2012-07-05T17:04:18.5776+05:30 parse_client_headers is done
2012-07-05T17:04:18.5776+05:30 Method is GET
2012-07-05T17:04:18.5777+05:30 URL::sendHeaders(): meth='GET' file='/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL' protocol='HTTP/1.1'
2012-07-05T17:04:18.5777+05:30 Header to WLS: [User-Agent]=[Java/1.6.0_11]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [Host]=[host1.example.com:7777]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [Accept]=[text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [ECID-Context]=[1.004l1E7Cv6mESOGLMy^Aye0007Kd00000E;kXjE1ZDLIPHUjDHCj9KSnJLTkGSRtGKRXUQRdURP5URPdUPPJLQSqPRO_VBSpGSSgPSKgHQRiPQRbLIRbPQR_JLPmMTQZLO]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [Connection]=[Keep-Alive]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-Proxy-SSL]=[false]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [X-Forwarded-For]=[xxx.xxx.xxx.xxx]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-PATH-TRIM]=[M1]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-Proxy-Client-IP]=[xxx.xxx.xxx.xxx]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [Proxy-Client-IP]=[xxx.xxx.xxx.xxx]
2012-07-05T17:04:18.5777+05:30 Header to WLS: [X-WebLogic-KeepAliveSecs]=[30]
2012-07-05T17:04:18.5779+05:30 About to call parseHeaders
2012-07-05T17:04:18.5779+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6366+05:30 Reader::fill(): sysRecv returned 1271
2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 200 OK]
2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: StatusLine set to [200 OK]
2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: StatusLineWithoutStatusCode set to [OK]
2012-07-05T17:04:18.6366+05:30 Header from WLS:[Date]=[Thu, 05 Jul 2012 11:34:18 GMT]
2012-07-05T17:04:18.6367+05:30 Header from WLS:[Transfer-Encoding]=[chunked]
2012-07-05T17:04:18.6367+05:30 Header from WLS:[Content-Type]=[text/xml]
2012-07-05T17:04:18.6367+05:30 Header from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
2012-07-05T17:04:18.6367+05:30 parsed all headers OK
2012-07-05T17:04:18.6367+05:30 Exiting method BaseProxy::sendRequest
2012-07-05T17:04:18.6367+05:30 sendResponse() : r->status = '200'
2012-07-05T17:04:18.6367+05:30 Hdrs to client (add):[Date]=[Thu, 05 Jul 2012 11:34:18 GMT]
2012-07-05T17:04:18.6367+05:30 Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
2012-07-05T17:04:18.6367+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6373+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6374+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6374+05:30 Reader::fill(): sysRecv returned 4048
2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4048
2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6381+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6381+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6381+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 1340
2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 385
2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 331
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 305
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 225
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 307
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 393
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 311
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 223
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 309
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 393
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 319
2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 327
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 377
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 305
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 309
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 379
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 311
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 315
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 381
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 179
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 152
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 327
2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 317
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 237
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 319
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 311
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 251
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 319
2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 233
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 325
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 261
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 315
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 239
2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 325
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 235
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 323
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 243
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 321
2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 321
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 239
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 329
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 329
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 103
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 415
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 286
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 231
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 267
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 333
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 253
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 335
2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 251
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 343
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 259
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 325
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 341
2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 353
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 331
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 265
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 327
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 263
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 335
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 261
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 337
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 255
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 345
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 279
2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 76
2012-07-05T17:04:18.6397+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 386
2012-07-05T17:04:18.6397+05:30 Reader::fill(): first=0 last=0 toRead=4096
2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 77
2012-07-05T17:04:18.6397+05:30 calling closeConn() with non-null URL* at 633
2012-07-05T17:04:18.6398+05:30 canRecycle: conn=1 status=200 isKA=1 clen=-1 isCTE=1
2012-07-05T17:04:18.6398+05:30 closeConn: pooling for 'xxx.xxx.xxx.xxx/8001'
2012-07-05T17:04:18.6398+05:30 closeConn: pooling '0'
2012-07-05T17:04:18.6398+05:30 request [YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL] processed successfully..................
2012-07-05T17:04:18.7859+05:30 BEFORE acquire_lock
2012-07-05T17:04:18.7860+05:30 AFTER acquire_lock
2012-07-05T17:04:18.7860+05:30 List size is 1
2012-07-05T17:04:18.7860+05:30 Cleaning up the list node 'host1.example.com.com:8001'list Length '1'
2012-07-05T17:04:18.7860+05:30 stale connections: KA = 20, delta = 0
The final request string generated is correct.. but still this fails in my java code (where i send request).
it gives me an error saying:
Error: java.io.FileNotFoundException: http://host1.example.com.com:7777/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL=/META-INF/wsdl/ServiceException.wsdl
javax.xml.ws.WebServiceException: java.io.FileNotFoundException: http://host1.example.com.com:7777/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL=/META-INF/wsdl/ServiceException.wsdl
Edited by: 925137 on Jul 5, 2012 4:42 AM -
How to use the same OC4j server with different port number
How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh GIn the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle -
How to use a different port in RMI
Hi ,
We cannot use default port 1099 in RMI due to some restrictions. I want to user port: 8000 instead.
Can some one please help how to use a different port?
Thanks
ArunC:\>rmiregistry.exe 8000
and in code use Naming.bind("rmi://<host>:8000", ....)
or LocateRegistry.getRegistry(host, 8000)
Genady -
Bug with using 2 certificates on a different port on the same machine
There seems to be an issue with using secure connection to the same web location but on a different port.
It is slightly difficult to recreate exactly but very often when one of the connections has been negotiated and the (self-signed) certificate added to Firefox when connecting to the same URL but placing a different port in the browser I get the error...
(Error code: sec_error_bad_signature)
It appears to get in a muddle as to which certificate should be used for which port. They have both been downloaded and the port number appears to be available in the certificate selection process but an error occurs nonetheless.I belive you can, I think my friends Apple TV is connected to their internet via an Ethernet cable, and we use Airplay sometimes using our iPads that are connected to the same network via WiFi. It should work as long as they are both connected to the same network. However, I don't have an Apple TV of my own, so don't take this as a solid answer.
-
What are the different ports required to Deploy(Run) an application in NWDS
Hi all,
We have a issue here in deploying our application in NWDS. As we are accessing our servers(from another country) thru firewalls in between, most of the ports are blocked for security reasons,henceforth, we are unable to deploy our application in NWDS.
Initially port 3601 was blocked, now its open.when i try to deploy my application , it prompts for a SDM password, after i enter it , it gives me error saying it can't process thru 50018 port.
So my query is , to build,deploy and run or debug a application in NWDS what are the different ports that needs to be accessable ?( so that i can tell my basis guys that all this specific ports need to be opened )
(Note: will the SDM port, debug port,Http port be enough to deploy and run an application)
Need your help on this
Regards,
VijayHi Arun,
Thanks for your reply, as you told port 3601, its already opened. I didnt understand about the 3200,3300,3299. Can u be more clear about why each of this port is used for? ( bcoz i need to give a reason to my Basis guys,what each port is for)
Hope this Log details of the error that I get here helps you:-
<i>Settings
SDM host : "ServerName"
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/abap1/LOCALS1/Temp/temp22390Welcome.ear
Deployment exception : Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"
Inner exception was :
Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"</i>
appreciate your valuable inputs. -
How do i group different ports for "DAQmxCreateDIChan" for a single task?
greetings.
the thing is that for "DAQmxCreateDIChan" i do this:
DAQmxErrChk (DAQmxCreateDIChan(taskHandle3,"Dev2/port0","",DAQmx_Val_ChanForAllLines));
and i can even do this
DAQmxErrChk (DAQmxCreateDIChan(taskHandle4,"Dev2/port1/line0:1","",DAQmx_Val_ChanForAllLines));
ok, in the first case it means that for taskHandle3 i will read all 8 bits from port0 in "Dev2/port0", right?
in the second case it means that for taskHadle4 i will read only line0 and line1 from port1 in"Dev2/port1", right?
once
this is explained: How can i read all 10 bits (i.e. line0 to line7 in
port0 and line0 to line1 in port1) for a single task so that in the
"DAQmxReadDigitalU32" that goes after "DAQmxCreateDIChan" i can have a
single read instead of two in the example above?
by the way, my device is a pci6229 and i'm using vc++ 2008.
thank you for reading.
ZZ
sorry for double posting...Hi ZainZeus!
The answer lies on the creation of the channel, DAQmx allows you to include different ports on the same line, that should include both ports on the same task. It should be something like this:
Dev1/port0/line0:7, Dev1/port1/line0:1
All of this must be on the same line under the " ". You can try this and check if it works.
Hope this helps.
Have a great day! -
How to configure Mail to use different ports for POP and SMTP?
I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
Any advice on how to solve this would be appreciated.Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
To recap his and my posts
SMTP:
In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
POP:
This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
Did you visit the URL I gave you previously? It even gives you screen shots. -
Multiple entries in ARD with same ip, but different ports?
I always learn so much from these forums...thanks to all of you who take the time to answer.
I established 5900/3283 for my primary mac (mac 1) behind my router at home and then configured port forwarding to have a public port of 15900 mapped to the secondary machine (mac 2) at 5900. I have dyndns set up in my router and when connecting from the outside with ARD to the dns name without specifying the port, it connects to mac 1 without problem and reports mac 1 as the name in ARD. Great, no problem.
When I add the 15900 port to the dns name, ARD still shows the mac 1 as the name, but connects to mac 2. Can I fix this to correctly reflect the name of Mac 2? Also, it does not seem possible to have two clients in the ARD list with the same ip address, but different ports. Can this be fixed? Lastly, how do I connect 15900 and 13283 ports in one listing for the port forwarded mac, i.e. how do I enter xxx.xxx.xxx.xxx:15900 and xxx.xxx.xxx.xxx:13283?
Thanks,
edAnd it's still impossible if they all have the same external IP. The whole stroy? See http://discussions.apple.com/thread.jspa?threadID=1321008&tstart=0
On option is to setup a VPN(=Virtual Private Network) as described in the thread I mentioned -
Hello,
I have three web applications on a SharePoint 2013 servers. In Central Administrators on the Application Management page where it lists all of the web applications, it shows Port 80 being used 2 3 sites. When I go to IIS, 2 of the 3 are using
different ports, 81 and 82. So, only one site IIS says is using port 80. Why is this? The host file has no entries in it. Where these web applications extended?
Thanks,
Paul
PaulHi Paul,
From the URL of the web application in Central Administration in the image, you have configured the Alternate Access Mapping for the web applications.
And the URL configured is by default using port 80 if you don’t
assign other ports for the web application, so the port is changed to 80 in Central Administration.
To be able to access the web application, you need to add binging for the web application in IIS(please make sure that you have added the host name in DNS).
For example, SharePoint – 32298, you need to create the binding for the web application in IIS as the image below:
Best regards.
Thanks
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
External display stays after removing adapter.
Hi! After having my MacBook connected to my TV earlier this week (via the Mini-DVI->TV-out adapter) the computer won't stop recognizing the TV display. When I unplug the adapter the screen on my MacBook flickers as if it is searching for displays and
-
Trouble connecting to wireless network with WRT610N
Need some help please. I have a WRT610N with 3 laptops that I am connecting to the network. I have been able to successfully connect 2 of them, but the third is a no go. I have the security set for WPA-TKIP, have a network code set; but when I ent
-
Reading from a Dual-Layer Disc
Hey y'all -- I am trying to rip some video files from the VIDEO_TS folder of a dual-layered DVD-Video (I have rights to the material) using OSEX, DVDBackup, Mac the Ripper, MPEG Streamclip, and just drag-and-drop. None of these solutions are allowing
-
Table or FM for Cost Distribution in ABAP-HR
Hi Experts, I need to find Cost Center and Internal order for an employee based on his organisation Unit. I have organisation unit ( ex: 608), they are maintaining cost center and Internal Order in PO10 tcode. Could you please let me know table or FM
-
How to Deregister dead copy of Photoshop Elements 9?
I installed Adobe Photoshop Elements 9 on a laptop which died. How can I deregister that installation now that the hard drive has been reformatted