Different templates, same blog site

Hi. I hope this hasn't been covered and I just missed it.
I have a blog with about 10 entries and I would like to change the theme on one particular entry. Can I do that without creating a whole different site? I don't see a way to readily go between themes on the same project/blog.
Thanks a lot.
Scott

Hello Scott...
Unfortunately, there isn't a way to easily switch themes between blog entries. I'm afraid this just isn't built into iWeb's abilities at this time. Depending on the theme that you have chosen though, it may be easy enough to delete the templated graphic items and change the color of things like backgrounds. If there are graphic elements that you like in another theme, you should just pretend like you are starting another blog or whatever template, and then just copy and paste the graphic elements that you like over to your blog entry page.
Anyways, just some ideas and possible workarounds to try to work around the limitations of iWeb. Give it a try and see if it will do for your situation. Best of luck to you!
James

Similar Messages

  • Using different templates for the desktop and phone versions of the same blog

    I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
    I have created both a desktop and a phone versions of the site.
    I  want to know how I can integrate the blogs that I  currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
    My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
    I  have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
    To recap my problem, I basically  need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
    Thanks.

    There can be few reason for this, including page contents links or contents used in phone/tablet version.
    Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
    Thanks,
    Sanjit

  • How to edit the same iWeb site on 2 different Macs?

    How can I edit the same iWeb site on 2 different Macs? I know we create a folder with the files, but when copying that to Mac2, iWeb on Mac2 doesn't see that folder - I can't see what the linkage is between the app's interface and the folder of site files....

    The answer is Domain.sites (extension hidden by default). You'll find this on the Mac you used to create the site at Users/YourUserName/Library/Application Support/iWeb. Copy that file to removable media and drag it to the same location on the other Mac. Launch iWeb and you'll see the site structure in the Site Organizer.
    Once you keep the Domain package in sync between the two machines everything will work smoothly no matter which you use. There's a neat tip here which may help in this respect, but you use whatever strategy you prefer:
    http://discussions.apple.com/message.jspa?messageID=1525121#1525121
    [ Visit here for iWeb Tips, Tricks and Hacks ]

  • Issue with AjaxControlToolkit for SharePoint 2013 Blog site template.

    Hi,
    Please find below the details of issue -
    History - We are working with SharePoint 2013 and we are using AjaxControlToolkit in our project. Basically this is a migration project from MOSS to SharePoint 2013. So we have migrated code MOSS to SharePoint 2013. Previously in MOSS project, AjaxControlToolkit
    was used so after migrating we have also used AjaxControlToolkit with updated version which can work in SharePoint 2013. This is working fine now.
    Scenario - There is one web application in SharePoint 2013 farm. Under this web application there are two site collections. One site collection is created with Team site template and second site collection is created with Blog site template.
    There are three feature in our wsp that we have created. One feature is at web application scope (which will do web.config modifications and it will add below entry in web.config file through SPWebConfigModification in section 'configuration/system.web/compilation/assemblies'
     <add assembly="AjaxcontrolToolkit, Version=4.5.7.725, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />  
    ). And there are two site collection features.
    Now when we deploy our solution (wsp) to web application in SharePoint 2013 farm and activate the Web.Config modification feature which is at web application level, it has added above mentioned entry in web.config file.
    Our application in first site collection is working fine which we are expecting but in the second site collection which is created using out of box Blog site template, 'comment box' and Post button are invisible as shown in below screen shot -
    If we remove below entry from web.config file -
    <add assembly="AjaxcontrolToolkit, Version=4.5.7.725, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" /> 
    and refresh the Blog site page then the Comment box and Post button is appearing again as shown in below screen shot -
    We also tried with updated versions of AjaxControlToolkit (Version=4.5.7.1005 & 4.5.7.1213) but no success.
    I will highly appreciate if you could help me in this.
    Thanks for your time.
    Thanks & Regards,
    Rajendra Gaikwad.

    Hi,
    As you said, the issue only comes with the Blog site template.
    I suggest you take a look at this blog about how to make Ajax Control Toolkit work with SharePoint 2013:
    http://andreaswijayablog.blogspot.com/2013/12/ajax-control-toolkit-with-sharepoint.html
    Another similar thread for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/60fa19fe-86a0-446b-b61f-11a82fe4287f/how-to-implement-ajax-toolkit-for-sharepoint2013?forum=sharepointdevelopment
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they
    help and unmark them if they provide no help. If you have feedback for TechNet
    Subscriber Support, contact [email protected]
    Patrick Liang
    TechNet Community Support

  • Create site Collection from site template containing blog subsite sp2013

    Hello,
    I want to create a site collection based on a `site template` that contains a `calendar app` and a `blog` subsite.
    I explain, i have a site that contains a subsite of type `blog` site and also contains a calendar in `sharepoint 2013`, i saved the site as a template and checked **`include content`**.
    However,
    when i create a new sitecollection based on that template, i get the caledar app but never the blog subsite...
    Am i missing something here? And how can we do this please?
    Thanks in advance

    Save site as Site Template only saves the individual site and its content, not the sub sites. please check below thread :
    http://social.msdn.microsoft.com/Forums/en-US/f167d3ac-afd4-407c-8108-2ae896d52752/how-to-save-site-template-with-subsites?forum=sharepointgeneralprevious
    get2pallav
    Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

  • Ldt files for different templates have same data

    i was asked to get .ldt files for different templates. I used FNDLOAD to download the files using xdotmpl.lct file. all the .ldt file when open in text has the same data. Am I doing something wrong. If the files are same why do we need seperate .ldt file for each template.

    But if you developing something and you are going to version it, then
    In case of single LDT
    ==================
    Its easy as you said, we can down load all def into one file.
    But, if one of the template def. got changed, all data gets downloaded unnecessarily .
    Single file , so you can say its easy .
    In case of multiple LDT
    ==================
    But, if one of the template def. got changed, then download that one only into ldt.
    Multiple file , little more effort is needed to create them.
    But more easy to maintain,

  • Can I reset the free partner site back to the original site template? Or, can I apply a different template to my partner site?

    Can I reset the free partner site back to the original site template? And, Or, can I apply a different template to my partner site?@

    Thank You All for your help! I found the apply templates widget but no option are given. Do I need to upload a custom template? I have my partner site all messed up.

  • Can we create same party site with same customer in different OU

    I am able to create same party sites with same customer in different Operating Unit through front end but I am not able to do so using TCA Api HZ_CUST_ACCOUNT_SITE_V2PUB.create_cust_acct_site .I am getting the below error 'Value for cust_account_id - party_site_id must be unique'.Ineed to migrate customer details from one OU to another OU and the party site number need to be same .Can anyone suggest a way in which I can do the above ?
    Reeja

    We can create multiple customer acct site across different OU pointing to same party_site_id with API's also. I am sure that you have initialise the org context in your code somewhere and thus its giving you this error. Reinitialise the org to target org before calling this API.
    Thanks
    Amit Singh

  • Data type change made to schema.xml of comments list which is part of blog site template is not reflecting in the existing site but working fine when new site is created.

    Hi,
    I have created a blog site with the available site template few days back. Now we have the requirement of having the attachments in the body of the comments section. 
    So, I updated the schema.xml of the comments list available under ../templates/blog/lists/comments/schema.xml to have rich text for the Body field.
    With this change, I created a new site and it was working fine. Change is reflected in the new blog site.
    However, this particular change is not reflected in the existing blog site. Any changes made to the schema.xml is not effecting the old blog site.
    Can anyone suggest what can be done for the change to be reflected in the old blog site?
    Thanks in Advance,
    Regards, Keerthi Suryadevara

    Hi,
    According to your post, my understanding is that you wanted to add attachments in the body of the comments section.
    You can add the the Code inside the Default list pages. For more information, you can refer to:
    Enable Attachment in SharePoint Blog post list and display the list Attachments
    In addition, you can add an enhanced rich text field to the comment list and remove the body field. Then you can insert files into comments, too.
    Here is a similar thread for your reference:
    http://sharepoint.stackexchange.com/questions/77194/how-to-add-attachments-for-comments-list-in-sharepoint-blog-2010
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • What is the best way to allow two designers, working in different locations, to have access to the same muse site?

    I'm trying to figure out the best way to share access to a muse site so that two different designers can be responsible for different features of the site. e.g., one is responsible for photo galleries, the other is responsible for shopping cart. Is there a way to do this?

    Hi
    Please check the following thread,
    How can multiple users from different locations access my Muse website files to update them?

  • Diagonal lines/questionmarks showing up on templates of entire site

    I have a huge website and don't want to have to start all over! Please help. On my iWeb, not the published site, I get all of these diagonal lines and question marks in the background. Part of the template is missing (details of stars in the kid blue template) The Web site itself doesn't have the lines, but some pictures are missing and some of the text is messed up. I don't know what to do to fix this. It has been suggested that I just eliminate the domain and start over. I pray that isn't my only option as I have spent many hours on the blog. I would greatly appreciate any help.
    Thanks, Marla
    This page will give you a clearer picture of what it looks like on the web... with pictures missing and words moved... see the snapshot to see what I see on the iWeb program itself.
    http://web.mac.com/nealbfinn/iWeb/Jackson%27s%20Site/My%20Blog/657164BB-A8CD-426 F-A8D3-DF4DD694678A.html
    I appreciate any and all help I can get.
    THanks,
    Marla
    here's the screenshot.
    http://homepage.mac.com/nealbfinn/Snapshot%202006-07-15%2014-58-45.tiff
    The lines show up on all of my pages within the iWeb program. The blog seems to be the most effected with missing pics and moved text in almost all of my blog posts... I have like 30 of them. I want to continue with the blog for my friends and family as we live on the opposite coast. We just bought an iMac and I'd like to work on my site some more, but don't know what I should do. If it is a currupt file, I don't want to bring the domain over to the new computer. I don't want to lose all of my work tho... what to do?
    If I insert a new page wiith the same template, kids blue, it does the same thing. If I insert a different template, it doesn't have the lines.
    Pleeese help me...

    Varkgirl is right!
    You have corrupted Kid Blue template, I experienced something bad (not quite like this) when I was writing the templates installer for Suzanne (sboben).
    Sorry, I didn't make the connections, but looking at your screen shoot:
    http://homepage.mac.com/nealbfinn/Snapshot%202006-07-15%2014-58-45.tiff
    and looking at iWeb Kid Blue template:
    http://www.geocities.com/[email protected]/images/kid_blue.jpg
    your screen shoot is missing the stars background (the stars on the right hand side):
    http://www.geocities.com/[email protected]/images/star_tiles.jpg
    and the image in the place holder (bottom image):
    http://www.geocities.com/[email protected]/images/place_holder.jpg
    My suggestion is, backup your home folder, your Domain.sites, and anything deems valuable, then re-install iWeb.
    Varkgirl, you have good intuition; we'll miss you .
    [edit] What do you know, I duplicated:
    http://www.geocities.com/[email protected]/images/badkidblue.jpg

  • Logic for DC selection for authentication within the same AD site

    Hello All, I am working on extending AD service from an existing data center to a new data center. As part of co-existence, I have created new DC's in the new data center but kept them as part of the AD site in the existing data center. Both the data centers
    have a 1 GB connectivity.
    What I would like to know is - would there be any internal logic in calculating which DC should a client authenticate against based on network latency or something like that ? I wanted to know if there was any way I can restrict the user workstations at
    the existing data center location (which is also the HQ location) to authenticate against the DC's available locally instead of travelling to the new DC's at the new data center, within the same AD site. I cannot make the new data center a separate AD site
    for now due to the migration challenges.
    Any inputs would be highly appreciated. Thanks in advance.

    Hi Goldy,
    I will recommend you to create a separate AD site and configure sites and services accordingly, if you dont want clients to authenticate against the new DC.
    DC locator is the service name which is responsible for assigning a logon DC to the client.
    If the DC's are in different sites you can configure the sites and services to point the client to correct DC in a site. AD authentication always distributed based on the sites and services you configured.
    You can configure ldapsrv records to authenticate against specific DC.
    Domain Controller Locator : an overview
    http://blogs.technet.com/b/arnaud_jumelet/archive/2010/07/05/domain-controller-locator-an-overview.aspx
    How DNS Support for Active Directory Works
    http://technet.microsoft.com/en-us/library/cc759550(WS.10).aspx
    LdapSrvWeight & LdapSrvPriority
    http://blogs.dirteam.com/blogs/carlos/archive/2006/05/10/How-to-lessen-your-PDC_1920_s-load.aspx 
    http://technet.microsoft.com/en-us/library/cc816793%28WS.10%29.aspx 
    How
    Domain Controllers Are Located in Windows
    http://support.microsoft.com/kb/247811
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Issue in Custom Blog site definition based on SharePoint 2010 blog site definition after migrating the sites to SharePoint 2013 and site collection upgrade

    I have created a custom blog site definition using SharePoint 2010 blog site definition with Configuration ID 31 in onet.xml (new value). This was working fine for SharePoint 2010.
    We created new SharePoint 2013 farm and deployed the all Custom solutions in
    14/15 folders. After migrating the sites to SharePoint 2013 using Content DB approach, site created previously using my custom definition are working fine.
    But after running site collection upgrade these sites stop working. When I post a comment then comments not getting listed on post detail page. However comments are getting added to Comments List but
    PostTitle column  of Comment is not getting populated.
    Also, when we create a new site in SharePoint 2013 using my custom blog template then that is also not getting provisioned.  default.aspx and look-up between post and comment list are not working.
    If any one has faced such issue then please share your findings and any solution to fix this.
    Thanks in Advance :)

    Hi ,
    According to your description, my understanding is that the blog based on custom blog site definition didn’t work correctly after migrating custom blog site definition to SharePoint 2013.
    If you customized the Onet.xml file in a previous version's site definition, you should modify some sections in the file to work in the current version, like  <BaseTypes> and  <ListTemplate>  etc. More information, please refer
    to the link below:
    http://msdn.microsoft.com/en-us/library/office/aa543837(v=office.14).aspx
    For that the PostTitle column  of Comment is not getting populated, please try to modify the view, then compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Can't post comments to Blog site

    Since .Mac switched to Me.com, I cannot see comments on my blog site.
    I can post/publish to the site from iWeb and others have said they can post comments (using Firefox, but not Safari). But when I go to view the comments, I get an error message:
    # Exception: TypeError
    # Message : Value undefined (result of expression postLinks.forEach) is not object.
    # File : Comments.js, Line:138
    I have not done anything differently in how I'm publishing the page.
    I am using Safari 3.1.2 to view the site.
    I am using iWeb '08 2.0.4 to publish the site.
    I have also tried to use Firefox (3.0.1) to see the comments, and get this error message:
    # Exception: TypeError
    # Message : postLinks.forEach is not a function
    I can see the comments if I open iWeb and read down the page. I cannot post comments using iWeb though.
    Any ideas?
    Message was edited by: Danielle Lum1

    Danielle ~ See this old thread:

  • Using different templates for different user access types.

    Hi all,
    I have an issue where we have a Page Group with lots of pages/sub-pages.
    There are three different User Groups, Internal, Customer and Supplier.
    I need to display the same content but with different templates (look and feel), one for the Internal, one for the customer and one for the supplier.
    Can this be done using Oracle Portal 10.1.14? If so, how?
    Many thanks.

    Hi,
    Yes you can do what you want to do in 10.1.4.
    You can call a procedure in your HTML Layout Template which will write some CSS. This procedure will be executed with the USERID parameter.
    Your procedure will check if the current user is a customer or a supplier and your CSS will reflect the differences (with different colors or whatever...)
    Good luck,
    Max.

Maybe you are looking for