Different Versions of CR DLL ??

Hello,
in a viewer project with:
Visual Studio 2008 (9.0.21022.8 RTM)
Crystal Reports 2008 SP3 + FixPack 3.1 (CR Developer 12.3.1.684)
For example:
in Visual Studio
Name: CrystalDecisions.CrystalReports.Engine
Typ: .NET
Version: 12.0.2000.0
Local copy: false
Path: C:\Programme\Business Objekt\Common\4.0\managed\dotnet2\CrystalDecisions.CrystalReports.Engine.dll
in Filesystem
Version: 12.3.1101.684
Path: C:\Programme\Business Objekt\Common\4.0\managed\dotnet2\CrystalDecisions.CrystalReports.Engine.dll
Why does Visual Studio shows a different version number.

Hello,
The version 12.0.2000.0 corresponds to the DLL version of Crystal Reports 2008.
And The version 12.3.1101.684 corresponds to the file version of Crystal Reports 2008 SP3.
The file version changes with every service pack install, but the DLL version which corresponds to the entire product, remains the same.
Take a look at the different DLL and File versions of crystal Reports in KBase [1215826|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7b6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333833323336%7d.do]
Thanks,
Bhushan.

Similar Messages

DBACOCKPIT There are different versions of ODBC32.dll in use

Hi all,
In dbacockpit if you go to Configuration and SQL Server Setup Check.
Got this error u201CThere are different versions of ODBC32.dll in useu201D
How do I fix this?

Hi Gareth Bosman,
For exact information about ODBC32.dll versions used, go to ST04 --> Diagnostics --> DISP+WORK DLLs
Here you can find the exact hostnames and all different versions of ODBC32.dll used.
Check and take the corrective steps either by updating MDAC or applying microsoft's recommended patches for that particular host only.
By the way, as per my observations, even continuing with multiple versions of ODBC32.dll will not affect smooth working of your application. you can update it at later times also.
Regards
Surjit

VS 2005 with CR XI R2 version 11 managed DLLs and Viewer

I have a development PC with VS 2005 and I need to interface with CR XI R2 reports.
I wanted to take advantage of Dynamic Graphic Location in CR XI (which the flavor of CR that came with VS 2005 does not have).
I installed CR XI R2 but still found the reference from VS 2005 to the engine was 10.2.51. Similar, the CR Viewer in VS 2005 was 10.2.51
If I build the rpt in CR XI and then run it in a VS project, because the engine is version 10, it ignores the logic wrt dynamic graphic location by formula.
In an attempt to fix, I then built and ran an install that had CR XI merge module. I think this then placed version 11.5.9710.1332s of CR such as CrystalDecisions.CrystalReports.Engine.dll on my PC (but not in GAC). i.e. I found version 11 objects under C:\Program Files\Business Objects\Common\3.5\managed, that I don't think were there before - and if they were I don't know how to get them there again. I did originally install CR XI off a disk that was not R2 - perhaps it was from that? I dunno.
I then referenced the ver 11 engine (and related dlls) in my VS 05 project it seemed to work fine.
My next problem was to get the CR Viewer to work. So, similar to the engine fix, I added the ver 11 viewer to my VS toolbar and manually referenced the ver 11 dlls.
At first this seemed to work - but after I saved and opened another project in VS, when I tried to do the same thing (use ver 11 viewer and reference ver 11 dlls) I got :
Could not load file or assembly 'CrystalDecisions.VSDesigner, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
I even get this now when I go back to my initial project I tried this in (that did work at first).
So then I went to a clean PC, and installed VS 2005 (including the CR that comes with it), then installed CR XI R2.
That put me back to square one - where I have VS 2005, but it references version 10 CR dlls and viewer (and it doesn't have any of the .NET ver 11 managed dlls).
What is the proper way to get VS 2005 CR references and CR viewer in VS 2005 upgraded so I can take advantage of XI R2 ?
Edited by: al smyth on Aug 13, 2008 10:49 PM

I have given up and found a different solution.
Upgrade to Crystal Reports 2008 (version 12).
The install detected Visual Studio and seemlessly integrated the assemblies and controls.
BTW - I was very impressed with the install logic and interface in this regard.
Nightmare over.
My understanding of how such an issue came to be is that it is a case of chicken and egg.
In my adventures trying to find an answer, I read that when MS was creating VS 2005, it had to have a commitment date and cut off from CR.
By the time VS 2005 was released CR had advanced and as a result they were out of sync (although I don't understand why I couldn't find any patch or update to VS 05 that would have put the assemblies for managed code in sync with CR XI R2)
So now CR releases CR 2008, and it has finally 'caught up' and provides the needed detection and SDK updates for VS (i.e. now the egg and the chicken co-exist).
I had read a few times on problems such as mine to "uninstall CR and then reinstall". I had done this, and I had tried also on a totally clean PC (in both cases 1st install VS w CR, then install CR XI R2). No dice
I had also read that it could have been because of the flavor of CR (professional vs developer or whatever). But that didn't seem to make sense because I thought CR now basically comes in one flavor - but I don't know exactly when that started.
Thanks to Mark for giving a reply and specifying exact file version and assembly version numbers.
I'll leave this as unanswered for a while just in case there's some poor S.O.B (son of a banker) who cannot upgrade to CR 2008 and is having similar problems.
Now, back to our regularly scheduled programming....

Install different versions of Site Studio Designer...

Hi all,
I have to install different versions of the product in the same machine (Site Studio Designer 7.7 (currently installed) and Site Studio Designer 10g).
When I am trying to install 10g version, I get a message to delete the previous version, and I can not install.
I have seen that there are ways to run different versions already installed on your PC (running scripts pointing to the dll files for each version), but can not find anything on the previous step to install them.
Can anyone help me?
Thanks in advance

Hi all,
In case anyone has the same error, I've got a possible solution.
I have changed the directory name of the Stellent Site Studio Designer 7.7. I tried to install de new version (10gR3), and I clicked 'Yes' to uninstall the previous version.
The new installation was successfully.
The, I had created a script to register their separate DLLs before launching. So you'll need to create a batch file for each Designer and put the following:
C:\WINDOWS\system32\REGSVR32 /s "C:\Archivos de programa\Stellent Site Studio\Designer\7.7\SSHelp.dll"
C:\WINDOWS\system32\REGSVR32 /s "C:\Archivos de programa\Stellent Site Studio\Designer\7.7\SSHtmlTidy.dll"
C:\WINDOWS\system32\REGSVR32 /s "C:\Archivos de programa\Stellent Site Studio\Designer\7.7\SSLoggerEngine.dll"
C:\WINDOWS\system32\REGSVR32 /s "C:\Archivos de programa\Stellent Site Studio\Designer\7.7\SSWebBrowserEx.dll"
"C:\Archivos de programa\Stellent Site Studio\Designer\7.7\SiteStudioDesigner.exe"
and similar for 10gR3 version, as indicated in the next thread: Site Studio Designer Install on windows 7 - 64 bit
Regards.

Difference between 620 version and 640 version of librfc32.dll

Hi,
What is the difference between librfc32.dll (620 version) and librfc32.dll( 640 version).
If I built my application with librfc32.dll(620 version) can I deploy it in a environment where librfc32.dll(640 version) is used.
please let me know if my application will break or face some problems.
Could you please reply as soon as possible , we are facing problem with production environment, just want to confirrm if this could be the root cause.
Thanks
Sivasankari

hi sivashankari,
librfc32.dll troubles
Once you are working with SAP BW BEx tool and accessing different version of SAP BW you might encounter an error in BEx Query Designer says: "Run-time error '-2147417848 (800010108)': Automation error The object invoked has disconnected from its clients". BEx Query Designer crashes afterwards.
Solution is to replace the RFC library librfc32.dll stored in your \WINDOWS\system32 on the client PC with a proper version depends on you SAP GUI version:
620: Version >= 6206.6.1938.4727 (620x.x.x.4727).
640: Version >= 6400.3.79.4740 (640x.x.x.4740).
710: check the newest patch of SAP GUI .
regards
karthik
reward me points if usefull

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running the current version. The backup file should be restored to a server with version '14.0.0.6106' or later

while Restoring a Site Collection from a different server i got below error in SharePoint 2010.
Kindly let me know , which patch i have to install along with the download link please. i am unable to find the correct patch to download..
Thanks in Advance,
Tarun
TARUN

Hi,
According to your post, my understanding is that you get an error when you restore a site collection from a different server in SharePoint 2010.
I recommend that you can try to click the “KB2536599” for SharePoint 2010 version 14.0.0.6106 to download the patch from the following links and install the patch in your environment.
http://blogs.technet.com/b/moss_it/archive/2011/08/15/lista-di-versioni-di-sharepoint-server-2010-o-sharepoint-foundation-2010-wss-4-0.aspx
http://support.microsoft.com/kb/2536599
After the installation, you need to run the Configuration Wizard. Later you should be able to restore this site collection successfully.
For more information, you can refer to:
https://ammarfassy.wordpress.com/2012/11/29/restore-spsite-your-backup-is-from-a-different-version/
https://social.technet.microsoft.com/Forums/en-US/cb9fb524-2a65-4a59-8f09-fc86366dd1c2/restore-errorversion-of-14006106-in-power-shell?forum=sharepointdevelopmentprevious
http://blogs.technet.com/b/stefan_gossner/archive/2011/07/12/june-2011-cu-for-sharepoint-2010-has-been-re-released.aspx
http://www.sharepointdesignerstepbystep.com/blog/SitePages/SharePoint%20versions.aspx
Best Regards,
Yumi Fu

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running The backup file should be restored to a server with version '12.0.0.6318' or later.

am trying to restore the bak file into a new site collection in my sp 2010 standalone env.
am getting error
PS C:\Windows\system32> stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C:\mBKUPCOPY\Sharepoint_bankup.bak"
STSADM.EXE : Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running
the current version. The backup file should be restored to a server with version '12.0.0.6318' or later.
At line:1 char:1
+ stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C: ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Your backup is ...6318' or later.:String) [], RemoteException
+ FullyQualifiedErrorId : NativeCommandError

As stated in the other thread on this topic you can't restore a 2007 backup to 2010, it needs to be upgraded.
https://social.technet.microsoft.com/Forums/en-US/31c70f0a-5d89-4308-895b-af0c2b249114/restore-the-site-collection-from-moss-2007-to-sp-2010-site-collec?forum=sharepointadminprevious

Have just been told by BT that I need a new/different version of Thunderbird to work with the new BTMail system (used to be BTYahooMail) - do I?

I have had btinternet email for years, and Thunderbird for a long time too and have been happy with both. Unfortunately, I am not technical enough to understand most of the help or instructions on the Thunderbird support/info pages, but did manage to get TB set up in the first place (ages ago) and it seems to have worked well since. However, on Friday both of my BT accounts (two numbers, therefore two sets of BT email addresses) were moved over to the new BT Mail from the old BT Yahoo mail. I was unable to log in to one of them, but the other one was fine - I had some 'screen sharing' help from a BT technical chap to sort it out. However, Thunderbird was unable to conect with the email servers. I told BT and the tech chap tried to sort it out on the screen share, but was unable to (and I was unable to follow what he was doing). Some months ago, I made some changes, as requested by BT, to enable the transfer to go smoothly (!) but the man changed some things on Friday, I think, as well. He was unable to fix the TB problem and I can't figure it out at all, and the lady from BT Tech help who I spoke to this morning (and who had managed to sort out my BTID log-in problem, thankfully) had a look and suggested that maybe I needed an updated/new/different version of TB or 'another email'. Well, I'd really like to stay with Thunderbird and was hoping someone here could explain it in plain english for me, please? I was wondering what would happen, supposing I need to download an updated/different version, if I did that and then sort of re-installed my existing BT email addresses (just as if I was starting again with Thunderbird)? I do hope there is someone here who can help - please - I'm rather fond of that little blue bird. Thank you.

Just add the account again.
File|New|Existing Mail Account…
There should be no need to delete or reinstall anything. Re-installing Thunderbird itself is rarely useful, since doing this doesn't delete account data. Don't delete the old yahoo-based account until you're sure that everything you need to keep is in the new criticalpath-based account.
CriticalPath is the name of the business providing email services to bt.com.
Some not very reassuring reading [http://www.theregister.co.uk/2014/03/13/bt_likely_to_have_breached_data_protection_act_after_email_accounts_were_allegedly_compromised_over_http_and_details_kept_in_log_files/ here].
You'd think bt could run their own email service, wouldn't you? Yahoo was generally seen as a poor choice. I'm not sure that criticalpath is any better.

Could there be independent VI paths for different versions of LabVIEW?

Hello,
When jumping between different versions of LabVIEW (6.1, 7.1, 8.5) it is annoying that the current path for one becomes the current path for the other.
If I am working with LV 7.1 in a folder dedicated to 7.1 VI's, and then open LV 8.5, I don't want 8.5 to go to that 7.1 folder by default. Alternately. if I was working in LV 8.5, closed it out, and then I click on a 7.1 VI, I don't want it to open in LV 8.5.
I've tried changing the path options in each version of LabVIEW, but that doesn't seem to help. Is there any way of isolating these folder paths from one another? One of our newer LV guys accidently opened some 7.1 code in 8.5.1 and then saved it. Luckily, I had archived code to return to, but it could have been a disaster.
Thanks for any ideas,
McSynth

You're actually asking two different questions.
The first question has to do with which version of LabVIEW gets launched when you double-click a file. This is an operating system thing. The one that gets launched is the last one that got used. (Your first question will be: can this be changed? Answer: Change the operating system. Or, play around with the registry each time you quit out LabVIEW.)
The second question has to do with search paths. These are independent. However, a VI will contain information about its subVIs in terms of where to find them. This is not a function of LabVIEW, as it is a function of the VI. Thus, it will make no difference which version of LabVIEW you use to open the VI. You can, if you wish, modify the search paths that LabVIEW uses to find VIs for each version of LabVIEW from the Tools->Options menu. However, this will not eliminate the problem, and your best bet is to keep those backups frequent.

How can I distribute an application using Reprot generation Toolkit for MS Office for different versions of MS Office?

I want to create an application which uses the Report Generation Toolkit for Microsoft Office. The office version of the target machine depends on what my customer has installed.
From several discussions I have seen that the installer detects which version I have on my development machine. I'm not able to hold three or four machines with different versions (97,2000,2002,XP).
I decided to do the following software architecture:
I create a LLB MakeReport.llb with a VI called MakeReport.vi. With VI server I will start MakeReport.vi in MakeReport.llb. Over a named queue I will send a command from my application to MakeReport.vi. Then the report will be
printed.
I will create this LLB by saving MakeReport.vi with File>>Save with options...>>Application distribution. All neccessary VIs will be in the LLB.
I will hold different directories for each version. I can create different version of the LLB. During installation of my application the LLB for the right version will be copied from the CD to the application folder.
I know I will be restricted in testing my report in only one version and hoping it will be good in the other versions.
I think that the difference lays only in the word and excel related llbs.
1. Will my software architecture work or is it obviously wrong?
2. How will I get all versions from the toolkit CD?
3. Which is the registry key I must read to get the right version (a minor question, if somebody knows I do not need to search for myself).
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

How can I save different versions in iMovie 11 (plus angry rant)

Sigh.
My fiancee is sitting in front of the computer crying because iMove just messed up her project. The project that was basically done. The project she has to hand in tomorrow morning (it is midnight right now).
Who knows what happened. Things apparently just jumped around and no amount of undoing is getting her back to where she wants to be (apparently she used undo, then tried to fix things, then tried to undo again).
Which leads me to:
*** was Apple thinking when they removed the ability to save a file? Seriously! Both of us are experienced computer users and both of us are in the (very vital) habit of saving multiple versions of a file. We don't save a version every 10 seconds, and we don't save a version for every insignificant change. But we do save versions whenever we feel we have hit a milestone. And we would have done exactly that had there been some obvious way to do it in iMovie.
OSX Lion (the first version of OSX that desperately makes me want to downgrade) is supposed to autosave so that you don't have to. But iMove 11 apparently cannot do even this simple thing. As far as I can tell you work on your project and it is the *only* version of this project you can ever work on. If you make a change, you can either:
live with it
or
linearly undo as long as you have not quit the program. Heaven forbid that it crashes or (like it just did right now) stops playing back audio and you have to quit and restart.
There must be a way of saving different versions of your project so that you aren't messing with your one and only precious copy every time you make an edit. Please tell me there is. Or how do I get to the autosaved versions? It is probably too late for her now (she has to redo most of the project to get the audio to line up again) but for future reference we could use some help.
Sigh. Now I have to go help her. I feel so bad for her and I pretty much want to chuck the freaking computer through Apple's living room window right now.

Sorry for your frustration.
Here are two tips that may help in the future.
To save a version, use FILE/DUPLICATE PROJECT http://help.apple.com/imovie/#mov3a61c0ec
You might also consider using Time Machine backups.

How can I run two different versions of Firefox, the latest does not work with an important site I need to use?

With the latest version of Firefox I cannot send "Quick Mails" to my students using the college's ANGEL system. I had to uninstall it and go to an earlier version. I prefer the newest rev.
Any way to run two different versions. It does not have to be simultaniously. Seems to be a problem on both my Mac and XP systems.
Thanks,
Kim

Currently I don't think there is a way to run two version of firefox at the same time. But you can install Firefox Beta or Aurora instead (which is build for future release for firefox) and help test it! Here's the link:
http://www.mozilla.org/en-US/firefox/channel/

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

How to use two different versions of the same jar within one project

Hi everybody!
I have a big problem while integrating different web service clients within one bigger java project. Both implemetations need some jar files to work but demand different version. So, i would like to know if there is any way to tell which implementation should use which version! Anyhow i add those jars to the classpath makes working only one or the other webservice working but never both! Any ideas somebody?
Best regrads,
Stefan G�tz

Of course do have the jar files different names but the classes inside of them are the same ... means that the standard system classloader can distinguish them. When you add a jar to a classpath the name actually dosent matter.... any other ideas, please?
PD.: i tryed to add a manifest file to the one jar which makes use of one of the dublicated jars to specify which jar to take direcly but it makes no difference since once classes loaded they cant be distinguish ....see:
http://java.sun.com/docs/books/tutorial/ext/basics/load.html

Different Versions of CR DLL ??

Similar Messages

Maybe you are looking for