Differentiating the type of programs

Hi,
In ABAP, we can write normal report and types, scripts, smartforms, tables, BDC etc.
By seeing the program name, can we identify that is a script, this is smartform like that.....
Plz note that there are no naming conventions for these set of programs.
Kindly let me know if there is any way.
Regards,
Anil.

hi,
There is no specific naming conventions based on object.
But you can differentiate them based on object type.
if you check in table TADIR you can get that details.
for ex:
object  object type
report   prog
script  form
smartform  ssfo......

Similar Messages

  • Why does the type tool and note tool close my InDesign program? [was: InDesign CC technical]

    Why does the type tool and note tool close my InDesign program?

    Install the CC Desktop app, or try Help > Updates....
    If all else fails, you can try Crash | Launch, selecting Type tool, but there are other bug fixes in the update.

  • Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard  fast it lag until I cannot locked or switch off the phone

    Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard  fast it lag until I cannot locked or switch off the phone

    Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage. 

  • HT201210 The new iOS 7 download changed the screens tremendously making them difficult to read.  How can the type be darkened and enlarged?  Can you revert back to the old program?

    I downloaded iOS 7 to my iPhone. Now everything is lighter making it difficult to see. The words (letters) are smaller and the type is lighter.
    Questions:
    Is there anyway to change the type to display more distinctly as it did on the older version?
    If not, is there anyway to return to the older version?
    Also, on my weather app, my city name keeps changing to Southwood, SC. Sometimes I have both but usually the Southwood takes over my home city selection. I don't know where Southwood, SC is located and do not want it on my phone.
    Why is the app changing my selected home city  to Southwood, SC?
    How to I stop it from changing?
    Also, the top city on the weather app will not allow you to delete it. Why is this? The other additions can be deleted.

    Hi Jean4438,
    Welcome to the Support Communities!
    I made the changes below to my iPhone and have personally been delighted with how much easier everything is to read.  Hopefully they will help you as well.
    Large and bold text - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph73b89c6
    Here is the information for making changes to the Weather app:
    In most situations, you will swipe from right to left to see the Delete button.
    Weather - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph1ac0b35f
    Although this isn't your specific iPhone model, the tips and tricks in this new document may help you get started with iOS 7:
    Apple - iPhone - iPhone 4s Tips and Tricks
    http://www.apple.com/iphone-4s/tips/
    I hope this information helps ....
    Have a great day!
    - Judy

  • Questions on the SAP payment program

    Hi everyone,
    Here are general questions the SAP payment program. Even partial answers would be greatly appreciated. Thanks in advance!
    Questions:
    What are the type of accounts involved in a payment transaction? In which case a customer account could be involved?
    What could "payment proposal run" mean and imply?
    What could be done as "editing a proposal run"?
    In the "print payment media" step, what does DME stands for?
    And in general, what are the diffenrences between a posting and an FI document?
    Is the payment run launched automatically?
    Thanks again
    SB

    What are the type of accounts involved in a payment transaction? In which case a customer account could be involved?
    You will make the payments to vendors and customers accounts. Customer accounts may involve where you would like to make payment for the advance that you have received from customers.
    What could "payment proposal run" mean and imply?
    Payment proposal is nothing but SAP will give you a simulation showing what are the invoices going to be paid, what are the invoice not going to be paid (exception) due to various reasons.
    What could be done as "editing a proposal run"?
    In Editing the Payament proposal, you can block a invoice, which you would not like to make the payment. You have to create the payment block specially for the purpose of payment proposal.
    In the "print payment media" step, what does DME stands for?
    DME - Data Medium Exchange
    And in general, what are the diffenrences between a posting and an FI document?
    Posting is posting a document into the system.
    FI document is a document having debit and credit totalled. To post a document both and debit and credit must be tallied.
    Is the payment run launched automatically?
    There is no automatic launching of Automatic Payment Program. You can schedule the job in background, but I would not recommend this. I would recommend the user to enter the parameters, run proposal, execute payment run and print the media.
    Regards,
    Ravi

  • The type and the length of the members of the structures

    I am making the BC-XAL program.
    Reading `XAL_Interface_Documentation_11.pdf', now I succeeded in "Reading All Saved Monitor Sets" and "Reading All Monitors of a Monitor Set". but I can't find the type and the length of the member of the Structure BAPITNDEXT, so I cannot get the Monitoring Tree of a Monitor.
    where can I get any documents or information ?

    This is how it looks in my 46c system.
    MTSYSID         SYSYSID         CHAR      8     0R/3 System, name of R/3 System                                 
    MTMCNAME        ALMCNAME        CHAR     40     0Alert: name of monitoring context                              
    MTNUMRANGE      ALTIDNUMRG      CHAR      3     0Alert: monitoring type number range (perm., temp, ...)         
    MTUID           ALTIDUID        CHAR     10     0ALert: Unique Identifier for  Monitoring Types (used in TID)   
    MTCLASS         ALTIDMTCL       CHAR      3     0Alert: monitoring type class (perf., single msg.,...)          
    MTINDEX         ALTIDINDEX      CHAR     10     0Alert: internal handle for TID                                 
    EXTINDEX        ALTIDINDEX      CHAR     10     0Alert: internal handle for TID                                 
    ALTREENUM       ALTREENUM       INT4     10     0Alert: MT Tree info: Number of tree                            
    ALIDXINTRE      ALIDXINTRE      INT4     10     0Alert: Tree Info: Index of MT in Tree                          
    ALLEVINTRE      ALLEVINTRE      INT4     10     0Alert: Tree Info: Level of MTE in Tree                         
    ALPARINTRE      ALPARINTRE      INT4     10     0Alert: Tree Info: Index of Parent of MT in Tree                
    OBJECTNAME      ALMOBJECT       CHAR     40     0Alert: Name of Monitoring Object                               
    MTNAMESHRT      ALMTNAMESH      CHAR     40     0Alert: Short Name of Monitoring Type                           
    CUSGRPNAME      ALCUSGROUP      CHAR     40     0Alert: Customization: Name of Customization Group              
    DELIVERSTA      ALDELIVSTA      INT4     10     0Alert: MT Val: Delivery Status                                 
    HIGHALVAL       ALVALUE         INT4     10     0Alert: alert value (1 = green, 2 = yellow, ....)               
    HIGHALSEV       ALSEVERITY      INT4     10     0Alert: severity (alerts, monitoring type custom..)             
    ALSYSID         SYSYSID         CHAR      8     0R/3 System, name of R/3 System                                 
    MSEGNAME        ALMSEGNAME      CHAR     40     0Alert: name of monitoring segment                              
    ALUNIQNUM       ALAIDUID        CHAR     10     0Alert: Unique Identifier to be used in AID (char10)            
    ALINDEX         ALINDEX         CHAR     10     0Alert: internal handle                                         
    ALERTDATE       ALDATE          DATS      8     0Alert: date                                                    
    ALERTTIME       ALTIME          TIMS      6     0Alert: Time value in timeformat                                
    DUMMYALIGN      ALDUMMYC2       CHAR      2     0Alert: Dummy field. Purpose: Alignment of date/time 16 byte    
    LASTVALDAT      ALDATE          DATS      8     0Alert: date                                                    
    LASTVALTIM      ALTIME          TIMS      6     0Alert: Time value in timeformat                                
    LASTVALDUM      ALDUMMYC2       CHAR      2     0Alert: Dummy field. Purpose: Alignment of date/time 16 byte    
    ACTUALVAL       ALVALUE         INT4     10     0Alert: alert value (1 = green, 2 = yellow, ....)               
    ACTUALSEV       ALSEVERITY      INT4     10     0Alert: severity (alerts, monitoring type custom..)             
    VALSYSID        SYSYSID         CHAR      8     0R/3 System, name of R/3 System                                 
    VMSEGNAME     ALMSEGNAME     CHAR     40     0     Alert: name of monitoring segment                                  
    VALUNIQNUM     ALAIDUID     CHAR     10     0     Alert: Unique Identifier to be used in AID (char10)                                  
    VALINDEX     ALINDEX     CHAR     10     0     Alert: internal handle                                  
    VALERTDATE     ALDATE     DATS     8     0     Alert: date                                  
    VALERTTIME     ALTIME     TIMS     6     0     Alert: Time value in timeformat                                  
    VALERTDUM     ALDUMMYC2     CHAR     2     0     Alert: Dummy field. Purpose: Alignment of date/time 16 byte                                  
    COUNTOFACT     ALCNTACTAL     INT4     10     0     Alert: MT Val: Count of active Alerts                                  
    COUNTSUM     ALCNTSUMAL     INT4     10     0     Alert: MT Val: Sum of Alerts in MT                                  
    VISUSERLEV     ALVISILEVL     INT4     10     0     Alert: MTE type dev cust: Visible on user level (op,exp,dev)                                  
    TDSTATUS     ALTDSTATUS     INT4     10     0
         Alert: MT: Type Def Status
    Welcome to SDN.
    Regards,
    Rich Heilman

  • How  to add custom fields to the  sap standard  program ukm_bp_display

    How  to add new custom  fields to the  sap standard  program ukm_bp_display .
    could u  please any one help me on this?

    Hello Kumar,
    You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
    Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
    DATA: BEGIN OF gt_grid_alv OCCURS 0.
           partner LIKE but000-partner,
           credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
            INCLUDE STRUCTURE ukm_s_account.
            INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
    DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
          Gruppe Vector
            INCLUDE STRUCTURE ukm_s_bp_vector.
          Gruppe OBL = Obligo
          include structure UKM_S_BP_CMS_MALUSDSP_OUT.
            INCLUDE STRUCTURE ukm_s_display_segment.
            INCLUDE STRUCTURE ukm_s_bp_cms.
            INCLUDE STRUCTURE bus000_dat.
    *DATA:   icon(4).
          Gruppe RAST (Raster)
    DATA:
             rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
    DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
    "Summe raster 2 bis 6
    DATA:  END OF gt_grid_alv.
    Another way is you can  go  to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
    Hope this will solve yiour problems.
    Regards,
    Antony Thomas

  • The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

    App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
    I'm getting the above errors when attempting to create a remote build.
    I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

    Hi,
    I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online. 
    The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors. 
     App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
     Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
     App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
     App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
     Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
     Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
     Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
    processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
    reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
    Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
    processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
    processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
    processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
    by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
    is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
    is required by your code, you may get compilation errors.
     C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
    either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
    Backslash(\).

  • WCF :Consider marking the type with the CollectionDataContractAttribute attribute or the SerializableAttribute attribute or adding a setter to the property

    Hi All,
    Currently I am working in a WCF project here when I try to send data from WCF Project 1 to WCF project 2 I am getting the below error.
    The formatter threw an exception while trying to deserialize the message: There was an error while trying to deserialize parameter http://tempuri.org/:subscriber. The InnerException message was 'The use of type 'Integra.Business.ICC.ObjectChangeTracker'
    as a get-only collection is not supported with NetDataContractSerializer.  Consider marking the type with the CollectionDataContractAttribute attribute or the SerializableAttribute attribute or adding a setter to the property.'.  Please see InnerException
    for more details.
    I don't understand what issue this is since I am new to WCF. Please help me on this thanks in advance.

    You've posted to a forum for Microsoft Project - a project management program.  Please re-post your question to the WCF forum:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wcf
    Sorry - I cannot seem to move your post for you.
    Julie

  • Inputting an excel file to the java servlet program

    Hi,
    How can I input an excel file into the java servlet program? I am using POI HSSF programming to read the content of that excel file.I have created a form that will accept the path from the user and in the servlet program, I have called a post method to retrieve the path of the file. I am getting the path of the file as a string.Then I have to access the file to read the data. But it is not working. What should I do?.Please help me.
    I have created an html file to create a form that will ask the path of the file to be loaded into the servlet program.Please give me a solution,thanks in advance. The servlet program that receives the file is shown below. It just only take the name of the file and prints if that is ok.
    <html>
    <body bgcolor="green">
    <center>
    <form method="post"  action="http://localhost:8080/examples/servlet/Ron1">
    <table>
    <tr>
    <td><B>ENTER THE PATH OF THE FILE</td>
    <td><input type=file name="path"></td>
    </tr>
    </table>
    <input type=submit value= "submit" >
    </form>
    </body>
    </html>
    import java.io.*;
    import javax.servlet.*;
    import java.lang.*;
    import javax.servlet.http.*;
    import java.sql.*;
    import java.text.*;
    import java.util.*;
    import com.oreilly.servlet.MultipartRequest;
    import org.apache.poi.hssf.usermodel.*;
    public class Ron1 extends HttpServlet
       public void doPost(HttpServletRequest request, HttpServletResponse response)   throws IOException, ServletException
            response.setContentType("text/html");
            PrintWriter out = response.getWriter();
            String u = request.getParameter("FileToUpload");
            out.println("The Path is "+u);
            System.out.println("The path is "+u);
            MultipartRequest multi = new MultipartRequest(request,u,10 * 1024 * 1024);
            System.out.println("path is "+u);
            Enumeration files = multi.getFileNames();
            File fUploadedFile = null;
            String sFileName = "";
            out.println("path is "+u);
            while(files.hasMoreElements())
                            String name = (String)files.nextElement();
                            out.println("file is "+name);
                            sFileName = multi.getFilesystemName(name);
                            String type = multi.getContentType(name);
                            fUploadedFile = multi.getFile(name);
                    FileInputStream fis= new FileInputStream(fUploadedFile);
                   HSSFWorkbook wb=new HSSFWorkbook(fis);
                    System.out.println("The path is "+u);
                    out.println("File has identified successfully\n");
                    out.close();
       }

    Hi,
    Can you try to use classes from java.net package (URL, URLConnection) to pass the contents of excel file to servlet?
    HTH
    Vishal

  • Getting Err  : An error occurred in the message processing program.

    Hi, Im wrking with Smartforms.
    I have assigned output type LD00 ,with driver prgrm name and Smf name.
    after that executing with VL03N , its giving error .
    Output could not be issued
    Message no. VL086
    Diagnosis
    An error occurred in the message processing program.
    Procedure
    Contact your system administrator.
    ...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
    Plz have eye on it.
    <removed by moderator>
    Regards
    vivek.
    Edited by: vivekd358 on Jul 10, 2010 7:35 AM
    Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

    closed

  • Could not find a part of the path 'C:\Program Files\Update Services\Schema\

    clean SC 2012 R2 RTM.
    1. had problems with WSUS installation/post configuration
    2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
    I followed the suggestion: reinstalled WSUS using ps and wsusutil.
    I canceled WSUS configuration at recommended step. Everything looked fine.
    But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
    I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
    When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
    Any suggestions for fixing this.
    Thanks.
    Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
    This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
        SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
    Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    >Any Errors in SUPSetup.log and WSUSCtrl.log log files?
    No errors in these files. As I mentioned there is no Schema folder in  Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ 
    Here are 3 repetitive errors in WCM.log:
    1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
    2. Failed to publish client with error = 0x80070003
    3. HandleSMSClientPublication failed.
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

  • What are the SAP standard programs?

    Hi PM Guys,
    I have a question that is as below:-
    We have the following Master Data:
    1) Functional Location
    2) Equipment
    3) Equipment BOM
    4) Counter
    5) Catalog Profiles
    6) Task List
    a) General Task List
    b) Equipment Task List
    7) Maintenance Plans
    a) Time Based
    b) Performance Based
    Can you tell me the SAP standard programs available for the above master data which can be used for data migration of the above master data from the flat files into SAP system.
    Thanks in Advance,
    Vijaya Krishna

    HI
    you can find the standard program while executing the T code LSMW itself.
    type LSMW ,specify the description in the next screen select the <b>Standard batch or direct input</b> under the heading you can find the in the field <b>object</b> use F4 to find all the standard programs in SAP
    0400   Equipment         
    0410   Message (IH)      
    0420   Confirmation (IH) 
    0425   Measuring point   
    0430   Measurement Documen
    0440   Functional location
    0450   Object link       
    0460   Maintenance plan  
    0470   Equipment task list
    0480   FnctnlLoc.TaskList
    0490   Gen.task list     
    regards
    thyagarjan

  • Ho to find script and the related print program for print preview of PO

    Hi All,
    We are getting some text output on the print preview of a purchase order.
    How can we determine the driver script and the corresponding print program for this.
    Can you please guide on this.
    Thanks in advance.
    Regards,
    Sanjeet

    U Can check Driver program and form related to that program table is TNAPPR
    Goto NACE t.code
    Selct Application ---> click on output types
    then u wil get one window there select proper output type and
    double click on  processing  routines u wil get form name and related driver program name also
    Plz try this....
    Edited by: Upender Verma on Feb 9, 2009 1:33 PM
    Edited by: Upender Verma on Feb 9, 2009 1:37 PM

  • The type of RETURNING parameter must be fully specified

    Hello,
    I want to program a locall class, a method to return a table of a local type:
    TYPES:
    BEGIN OF ty_line,
       id   TYPE char10,
       txt  TYPE string,
    END OF ty_line,
    ty_line_tt type standard table of ty_line.
    CLASS cl_html DEFINITION FINAL CREATE PRIVATE.
      PUBLIC SECTION.
        CLASS-METHODS parse importing fdata        type string_table
                            returning value(fmeta) type ty_line_tt.
    ENDCLASS.                    "cl_rep DEFINITION
    Got an error as in the subject. Does that mean that the table type MUST be declared in the ABAP dictionary?
    Regards,
    Michal

    Hello Michal
    Since your static method is PUBLIC you cannot use local types in its interface. The type of the RETURNING parameter must be public as well. Thus, you have to define it in the DDIC.
    Alternatively, you could switch to the more flexible EXPORTING parameters. Or you could return you itab as data reference, e.g.:
    *& Report  ZUS_LOCAL_CLASS                                             *
    REPORT  zus_local_class                                             .
    TYPES:
    BEGIN OF ty_line,
    id TYPE char10,
    txt TYPE string,
    END OF ty_line,
    ty_line_tt TYPE STANDARD TABLE OF ty_line.
    *       CLASS cl_html DEFINITION
    CLASS cl_html DEFINITION FINAL CREATE PRIVATE.
      PUBLIC SECTION.
        CLASS-METHODS parse IMPORTING fdata TYPE string_table
    *    RETURNING value(fmeta) TYPE ty_line_tt.
        RETURNING value(data_obj) TYPE REF TO data.
    ENDCLASS. "cl_rep DEFINITION
    *       CLASS cl_html IMPLEMENTATION
    CLASS cl_html IMPLEMENTATION.
      METHOD parse.
    *   define local data
        DATA:
          lt_line_tt    TYPE ty_line_tt.
        APPEND INITIAL LINE TO lt_line_tt.
        GET REFERENCE OF lt_line_tt INTO data_obj.
      ENDMETHOD.                    "parse
    ENDCLASS.                    "cl_html IMPLEMENTATION
    Regards
      Uwe

Maybe you are looking for

  • Can't Find "DVD and CD Sharing" under Sharing

    Hello, I got a new MacBook Air a week ago, and I couldn't find "DVD and CD Sharing" under sharing in system preferences.  Is there any way to make it appear? I am trying to share the CD from a Windows computer, and I installed this on my Windows comp

  • Database partitions

    Hi, Please can anyone tell me the significance of data partitioning in terms of space issues? We have a table in our databse which will store upto 100 GB of data. This table is partitioned by range. The data from this table is not deleted anytime, bu

  • Regarding Customizing of Time Statement Form

    Hi All, I have a standard form for Time Statement which is used in ESS (portal) and that is to be customized. The Standard Form is a SmartForm and we need to make a "Z" form now. Std Form : PYXXFO_SAP_TIM_99_0001 The issue is that when we make the co

  • Std Page refresh issue

    Hi, On a standard page, I have added a column of itemtype link to a table through personalization, which shows status. On click of link, I'm calling a custom read only page (has its own custom AM and VO) in a new window. Its a simple readonly table w

  • Agent assignment problem for activity in workflow

    Hi Experts, I have created an activity task for calling MM02 transaction in my workflow. I need to send this workitem to multiple people. I am using an expression in the place of agent assignment available in Control tab of the task. Now this assignm