Difficulties with Screensaver settings of photographs

I am using the standard screensaver. It is set to randomly load photographs from an iPhoto folder. Problem is that photoggraphs that were taken lengthwise (as opposed to hoizoontal, or portrait as opposed to landscape) load sideways on the screen. How do I ensure that all photographs load the right way, some of them landscape, some portrait?

Thanks Roosevelt, Yes, I had closed down all of the apps before I did the re-set of all settings and had found that the shutting-down problem appeared with any app I then subsequently tried. Yes, I have done a Home/Sleep reset and this did not fix the problem. Yes, I did have to re-enter my wifi settings, and that now works again. thanks for the insight that the mail settings stay, but I can't, as yet, get to these settings! Thanks for your suggestions, and I am still trying to find some answers for my problem!
Best wishes,
Niels

Similar Messages

WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
I don't know if I have DMZ setup incorrectly, or if it's my settings.
Setup as follows:
PCX2200 modem connected via ethernet to WRT310N.
The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G.
In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest. For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of 82ms.
Here is an image of the results:
http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
"Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
MTU: Auto, which stays at 1500 when I check under status.
Advanced Routing: NAT routing enabled, Dynamic Routing disabled.
Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
Access Restrictions: None.
Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
Port Range Triggering: It does not allow me to change anything in this page.
DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:" I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.
Under QoS: WMM Enabled, No acknowledgement disabled.
Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number.
Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
Web utility access via Wireless: Enabled. Remote Access: Disabled.
UPnp: Enabled.
Allow Users to Configure: Enabled.
Allow users to Disable Internet Access: Enabled.
Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
PING 192.168.1.104 (192.168.1.104): 24 data bytes
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
--- 192.168.1.104 data statistics ---
5 Packets transmitted, 0 Packets received, 100% Packet loss
Also, when I do Traceroute Test for my Xbox's IP, I just keep getting:
traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
1 * * * 192.168.1.1 Request timed out.
2 * * * 192.168.1.1 Request timed out.
As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated.
Message Edited by CroftBond on 02-18-2010 01:09 PM

I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year. In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall. Rebooting helps for a few minutes, but the problem returns. All of the other fixes recommended on these forums did not help. I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings. If you have SPI Firewall disabled, you will never be able to ping your IP from an external address. Turn your SPI Firewall back on and test your Ping.
John

Where are Photo Screensaver settings saved?

Hi,
I need to programatically change settings for the Photo Screensaver. The registry keys used in Windows Vista no longer apply in Windows 7. I tried using a folder with an uncommon folder name to point the Photo Screensaver to so that it would be easier to find in the registry. When I do a registry search, the folder name cannot be found. Maybe this is kept in a settings file somewhere instead of the registry?
We use a custom photo deck for our screensaver and it hasn't worked well to put it in the Pictures folder. You'll end up displaying personal photos along with the custom photos. I have been making a folder in Program Files and pointing the screensaver there.
The settings I would like to be able to change are:
Use pictures from: (you browse to the folder that contains your photos)
Slide show speed: (change the transition speed of the photos)
Shuffle pictures: (I would like to be able to check this box so the photos display randomly)
If anyone knows where to find these settings, it would be greatly appreciated if you could share the location of these settings.
Thanks,
Rob

you can use this code
cls
#That string is encoded in Base64, without headers. There is a Windows API that encrypt binary arrays (the PIDL) to Base64, CryptBinaryToString. The dwFlags parameter should be set to CRYPT_STRING_BASE64.
#Our problem is the inverse, given a Base64 string (the encoded PIDL), get the decoded PIDL. There's an API for that, too!, CryptStringToBinary. The dwFlags parameter should also be set to CRYPT_STRING_BASE64.
#I think it is not hard to write a small program that uses those API's (and some more to get a "readable" path from the PIDL); ask in the MSDN forums to get directions if you get stuck.
#http://www.ms-windows.info/Help/windows-photo-screensaver-settings-19334.aspx
#http://msdn.microsoft.com/en-us/library/aa379887(v=vs.85).aspx
#BOOL WINAPI CryptBinaryToString(
# _In_ const BYTE *pbBinary,
# _In_ DWORD cbBinary,
# _In_ DWORD dwFlags,
# _Out_opt_ LPTSTR pszString,
# _Inout_ DWORD *pcchString
#http://msdn.microsoft.com/en-us/library/aa380285(v=vs.85).aspx
#BOOL WINAPI CryptStringToBinary(
# _In_ LPCTSTR pszString,
# _In_ DWORD cchString,
# _In_ DWORD dwFlags,
# _In_ BYTE *pbBinary,
# _Inout_ DWORD *pcbBinary,
# _Out_ DWORD *pdwSkip,
# _Out_ DWORD *pdwFlags
add-type @"
using System;
using System.Text;
using System.Runtime.InteropServices;
using System.Text.RegularExpressions;
public static class PIDLUtils
// funciones
[DllImport("shell32.dll")]
public static extern Int32 SHGetDesktopFolder(out IShellFolder ppshf);
[DllImport("shell32.dll")]
public static extern bool SHGetPathFromIDList(IntPtr pidl, StringBuilder pszPath);
[DllImport("crypt32.dll")]
[return: MarshalAs(UnmanagedType.Bool)]
private static extern bool CryptBinaryToString(IntPtr pcbBinary, int cbBinary, uint dwFlags, StringBuilder pszString, ref int pcchString);
[DllImport("crypt32.dll")]
[return: MarshalAs(UnmanagedType.Bool)]
private static extern bool CryptStringToBinary(string pszString, int cchString, uint dwFlags, IntPtr pbBinary, ref int pcbBinary, ref int pdwSkip, ref int pdwFlags);
// interfaces
[ComImport]
[InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
[Guid("000214E6-0000-0000-C000-000000000046")]
public interface IShellFolder
Int32 ParseDisplayName(IntPtr hwnd, IntPtr pbc, String pszDisplayName, UInt32 pchEaten, out IntPtr ppidl, UInt32 pdwAttributes);
Int32 EnumObjects(IntPtr hwnd, ESHCONTF grfFlags, out IntPtr ppenumIDList);
Int32 BindToObject(IntPtr pidl, IntPtr pbc, [In]ref Guid riid, out IntPtr ppv);
Int32 BindToStorage(IntPtr pidl, IntPtr pbc, [In]ref Guid riid, out IntPtr ppv);
Int32 CompareIDs(Int32 lParam, IntPtr pidl1, IntPtr pidl2);
Int32 CreateViewObject(IntPtr hwndOwner, [In] ref Guid riid, out IntPtr ppv);
Int32 GetAttributesOf(UInt32 cidl, [MarshalAs(UnmanagedType.LPArray, SizeParamIndex = 0)]IntPtr[] apidl, ref ESFGAO rgfInOut);
Int32 GetUIObjectOf(IntPtr hwndOwner, UInt32 cidl, [MarshalAs(UnmanagedType.LPArray, SizeParamIndex = 1)]IntPtr[] apidl, [In] ref Guid riid, UInt32 rgfReserved, out IntPtr ppv);
Int32 GetDisplayNameOf(IntPtr pidl, ESHGDN uFlags, out ESTRRET pName);
Int32 SetNameOf(IntPtr hwnd, IntPtr pidl, String pszName, ESHCONTF uFlags, out IntPtr ppidlOut);
// enumeraciones
public enum ESHCONTF
SHCONTF_FOLDERS = 0x0020,
SHCONTF_NONFOLDERS = 0x0040,
SHCONTF_INCLUDEHIDDEN = 0x0080,
SHCONTF_INIT_ON_FIRST_NEXT = 0x0100,
SHCONTF_NETPRINTERSRCH = 0x0200,
SHCONTF_SHAREABLE = 0x0400,
SHCONTF_STORAGE = 0x0800
public enum ESFGAO : uint
SFGAO_CANCOPY = 0x00000001,
SFGAO_CANMOVE = 0x00000002,
SFGAO_CANLINK = 0x00000004,
SFGAO_LINK = 0x00010000,
SFGAO_SHARE = 0x00020000,
SFGAO_READONLY = 0x00040000,
SFGAO_HIDDEN = 0x00080000,
SFGAO_FOLDER = 0x20000000,
SFGAO_FILESYSTEM = 0x40000000,
SFGAO_HASSUBFOLDER = 0x80000000,
public enum ESHGDN
SHGDN_NORMAL = 0x0000,
SHGDN_INFOLDER = 0x0001,
SHGDN_FOREDITING = 0x1000,
SHGDN_FORADDRESSBAR = 0x4000,
SHGDN_FORPARSING = 0x8000,
public enum ESTRRET : int
eeRRET_WSTR = 0x0000,
STRRET_OFFSET = 0x0001,
STRRET_CSTR = 0x0002
// constantes
private const uint CRYPT_STRING_BASE64 = 1;
// mis funciones
public static string Encode(string myClearPath)
IShellFolder folder;
IntPtr pidl;
string Pathcodificado;
Pathcodificado = "ERROR";
string myPathTextoPlano = myClearPath;
//string myPathTextoPlano = @"c:\flashtool"; // Regex.Escape(myClearPath);
// este es el folder del escritorio (raíz del espacio de nombres del shell)
if (SHGetDesktopFolder(out folder) == 0)
// pidl del archivo
//folder.ParseDisplayName(IntPtr.Zero, IntPtr.Zero, @"C:\walter\yo.png", 0, out pidl, 0);
folder.ParseDisplayName(IntPtr.Zero, IntPtr.Zero, myPathTextoPlano, 0, out pidl, 0);
// parseo el pidl para obtener sus tamaño
int k = 0;
short cb = 0;
// ONLY WORKS WITH .NET FRAMEWORK 4
// while ((k = Marshal.ReadInt16(pidl + cb)) > 0)
// cb += (short)k;
IntPtr tempIntPtr = new IntPtr(pidl.ToInt64() + cb);
while ((k = Marshal.ReadInt16(tempIntPtr)) > 0)
cb += (short)k;
tempIntPtr = new IntPtr(pidl.ToInt64() + cb);
cb += 2;
// encripto el pidl
StringBuilder sb = new StringBuilder();
int largo = 0;
CryptBinaryToString(pidl, cb, CRYPT_STRING_BASE64, null, ref largo);
sb.Capacity = largo;
if (CryptBinaryToString(pidl, cb, CRYPT_STRING_BASE64, sb, ref largo))
//Console.WriteLine(sb.ToString());
Pathcodificado = sb.ToString();
Marshal.FreeCoTaskMem(pidl);
return Pathcodificado;
public static string Decode (string myEncryptedPath)
IShellFolder folder;
// IntPtr pidl;
string PathDescodificado;
PathDescodificado = "ERROR";
string mypathEncriptado = myEncryptedPath; // Regex.Escape(myEncryptedPath);
// este es el folder del escritorio (raíz del espacio de nombres del shell)
if (SHGetDesktopFolder(out folder) == 0)
// Desencripto
int a = 0;
int b = 0;
int largo = 0;
CryptStringToBinary(mypathEncriptado, mypathEncriptado.Length, CRYPT_STRING_BASE64, IntPtr.Zero, ref largo, ref a, ref b);
// recreo el objeto
IntPtr pidl2 = Marshal.AllocCoTaskMem(largo);
//if (CryptStringToBinary(sb.ToString(), sb.Length, CRYPT_STRING_BASE64, pidl2, ref largo, ref a, ref b))
StringBuilder sb = new StringBuilder();
if (CryptStringToBinary(mypathEncriptado, mypathEncriptado.Length, CRYPT_STRING_BASE64, pidl2, ref largo, ref a, ref b))
// muestro el path proveyendo el pidl reconstruído
//sb.Clear(); Only works with .NET 4
sb.Length = 0;
sb.Capacity = 261;
SHGetPathFromIDList(pidl2, sb);
//Console.WriteLine(sb.ToString());
PathDescodificado = sb.ToString();
//Marshal.FreeCoTaskMem(pidl);
Marshal.FreeCoTaskMem(pidl2);
return PathDescodificado;
try
$MyPath = "c:\Windows"
$Encrypted = [PIDLUtils]::Encode($MyPath)
$Encrypted
$notEncrypted = [PIDLUtils]::Decode($Encrypted)
$notEncrypted
catch
$_
break

Sleep and screensaver settings

I have a problem with my screensaver settings, the computer goes to sleep after 10 minutes of inactivity.
Changed system preferences for shutdown, monitor and screensaver to never but the computer still goes to sleep after 10 minutes.
Can you advise on how to stop this from happening?

Hello there, Frustr8ted.
Great job trying to find a resolution for this on your own. There can be a few different places in Settings that can affect the sleep options on your Mac. The following article touches on a few of them in the context of Energy Saving:
OS X Yosemite: Save energy
One thing to keep in mind are the two separate settings for Computer and Display under "Energy Saver" preferences.
Thanks for reaching out to Apple Support Comunities.
Cheers,
Pedro.

Screensaver Settings Freeze

Hi,
I have a strange problem with my screensavers.When i go to the System Preferences -> Desktop and Screensaver settings,then click on screensaver tab, the windows does not allow me to click anywhere. The system preferences window freezes and i cannot select a screensaver or any of the buttons on that window. I can still go the menu on the top and select View -> Show all Preferences & it works. Desktop and wallpaper settings are also no problem.
But i cannot change the screensaver because of the above problem..
I dont have any third party screensavers apart from the one which come with mac os x. I am using the latest os x version(10.4.4). This problem existed before the upgrade as well..
Can someone please help me to resolve this?
Thanks!

Rich,
Thanks for your reply.
I have tried the 3 options you suggested :
1. Changing account : Still the same for another user also.
2. Clearing logs and repairing disks : I do this regularly, it does not help
3. Yes, i cheked the console logs today on your advice. Here is what i see in the console :
2006-01-24 16:35:10.312 System Preferences[585] * NSRunLoop
ignoring exception '* -[NSCFArray addObject:]: attempt to insert
nil' that raised during posting of delayed perform with target
4c02c90 and selector 'setup2:'
2006-01-24 16:35:10.321 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (6) beyond bounds (4)
2006-01-24 16:35:12.267 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (6) beyond bounds (4)
2006-01-24 16:35:13.006 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (6) beyond bounds (4)
2006-01-24 16:35:14.011 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (6) beyond bounds (4)
2006-01-24 16:35:14.865 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (6) beyond bounds (4)
2006-01-24 16:35:15.545 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (6) beyond bounds (4)
2006-01-24 16:35:17.204 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (6) beyond bounds (4)
2006-01-24 16:35:18.398 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
2006-01-24 16:35:18.424 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
2006-01-24 16:35:18.577 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
2006-01-24 16:35:18.603 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
2006-01-24 16:35:18.717 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
2006-01-24 16:35:18.743 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
2006-01-24 16:35:19.020 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
2006-01-24 16:35:19.160 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
2006-01-24 16:35:19.370 System Preferences[585] * -[NSCFArray
objectAtIndex:]: index (4) beyond bounds (4)
System Preferences(585,0xa000ed68) malloc: * Deallocation of a
pointer not malloced: 0xbfffddb0; This could be a double free(), or
free() called with the middle of an allocated block; Try setting
environment variable MallocHelp to see tools to help debug
System Preferences(585,0xa000ed68) malloc: * Deallocation of a
pointer not malloced: 0xbfffdc20; This could be a double free(), or
free() called with the middle of an allocated block; Try setting
environment variable MallocHelp to see tools to help debug
Does this tell you anything? Beats me..
Regards
iBook G4 Mac OS X (10.4.3)

Problem with screensaver/sleep

Ever since upgrading to Snow Leopard a few months ago, I have had a host of problems. I have given up on the freezing issue, since I've read through these forums a lot, tried practically everything, and nothing has worked.
But this is a problem I can't seem to find on other posts. Instead of my computer screen dimming, going to screensaver, then after a while to sleep as it is set up to do, it will dim and then quickly go straight to sleep. When it does this, it will not wake up. I will touch the trackpad and the cursor will show up, but the screen remains black. I am forced to reboot. Combined with the freezing issue, this can lead to several reboots a day.
Because I don't want to mess with the settings for screensaver and sleep too much, I just run Caffeine when I am using my computer. I don't see this as a permanent solution, obviously. A computer needs to sleep.

I have had the same problem since upgrading to 10.6.2 I have had my laptop for over 6 months and have never had this problem. I install 10.6.2 and now I have the problem 3-5 times a day. Once my my display/computer go to "sleep" I often have to reboot. This isn't even from shutting the lid, I generally keep the lid up and the power plug in. I found a bunch of sleep issue dealing with closing the lid, but I am not sure if the fixes for that are the same since my issue is not necessarily associated with closing the lid.
Anyway, one of the suggestions is to go into the Energy Saver prefs and uncheck the "wake for network access" option and the "automatically reduce brightness before display goes to sleep option" I just tried this today so time will tell if it works or not,

On previous iPhones you could go to settings and block the the actual text message from pooping up. Only the sender would show up. On the i4gs the sender and message show up. This is a major flaw as far as privacy. There are no options with in settings to

On previous iPhones you could go to settings and block the the actual text message from pooping up. Only the sender would show up. On the i4gs the sender and message show up. This is a major flaw as far as privacy. There are no options with in settings to stop this from happening. PLEASE TELL ME IM WRONG ???

YOU ARE WRONG.
Go to Settings > Notifications > Messages. You can turn Notifcation Center off for Messages, or select None for the alert style, and turn Show Preview off, and view in Lock Screen on or off.

HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying. The email will sit in my outbox and then at some point will send. It sometimes takes days. What is wrong with my settings?

When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying. The email will then sit in my outbox. At some point it will send but it is hardly dependable. What is wrong with my settings?

The collum to the right listed similar problems. The solution appears to be that under smtp outgoing settings the user name and password are listed as optional. I have not plugged in the information and it seems to be working. However from my office it always allowed the relaying. The true test will be when I try to respond later from the road.
Thank you for your help.

How do I disable Autocomplete COMPLETELY without messing with other settings such as with the location bar? I still like to see websites there that I've been to, without typing it in every time, but just hate the autocomplete part.

Case: When I go to Tools - Options - Privacy then Location Bar options, there should be another option to where we can disable auto-complete from the Location Bar without messing with other settings. Example #1: I click "Nothing" and then I gotta type in the website I wanna go to every single time. Example #2: I click "History & Bookmarks" and then it auto-completes. Is there any other option just to disable Auto-Complete all together??

Is inline autocomplete enabled?
See:
* http://kb.mozillazine.org/Inline_autocomplete

I purchased a text tone from Itunes. It shows up in my library, but not as a text tone. Is there a way for me to set it as a text tone for all texts? Or I am stuck with factory settings?

I purchased a text tone from Itunes. It shows up in my library, but not as a text tone. Is there a way for me to set it as a text tone for all texts? Or I am stuck with factory settings?

So it is conseidered a customized text tones even if it was purchased through iTunes? Confusing. Since I bought it through itunes as a text tone I assumed it would work. OOOPS
Thanks so much

I hate it i am fed up it so diffiuclt Why they make it so difficult with transferring photos contacts data from iphone 5s to pc .!!!!!!!!!!!!!!!!!!!!!!!!!!!

i hate it i am fed up it so diffiuclt Why they make it so difficult with transferring photos contacts data from iphone 5s to pc .!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hook the phone to the computer, open the Computer icon and look for the iPhone folder. Copy the images. Not difficult at all. Sync your contacts with Outlook through iTunes. Not really so difficult.

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

I am having difficulties with distributing a PDF Form. Acrobat X pro

I am having difficulties with distributing a PDF Form. When I click the distribute button I choose the "Manually collect responses in my email inbox option" then press next, I select the "Save a local copy and manually send it later and then I specify it's location, then press next. I then press finish. Then a little black box pops up that says creating response file and nothing is happening. Can anyone help me?

[discussion moved to PDF Forms forum]

Print out lists of formats with their settings

I would like the ability to print out a complete list of paragraph, character, table, and cross-reference formats (with their settings) for inclusion in a local style guide.

Julee,
Those files were .zip files wrapped in 7zip wrappers - very strange. Any way, I've attached the MIF_munch here in a single .zip file.
Note: the file is named Mif_munch.zip.txt to fool the upload file type restrictions. Just delete the .txt extension and unzip.
It might take a few hours or so to clear the scanning queue.

I have a photo that i originally had in my iphoto library and because i used it as my desktop background i cant remove it from my desktop and screensaver settings does anyone know how i could remove it??

i have a photo that i cant get rid of in my desktop and screensaver settings and i cant find it in my iphoto library

in iPhoto, go to the View Menu/Hidden Photos and see if your photo was Hidden.

Difficulties with Screensaver settings of photographs

Similar Messages

Maybe you are looking for