Digital input and digital output at the same time

Hi all
I have a PCI-6503 board. I have done 2 task that run simultaneously: the first one is port0_16 output and the second one is port2 input.
I get sometimes (not every times...this is strange...) error-200587 saying:
'Requested operation could not be performed, because the specified digital lines are either reserved or the device is not present in NI-DAQmx.
It is possible that these lines are reserved by another task, the device is being used through the Traditional NI-DAQ interface, or the device is being reset. You might also get the error if the specified resource is currently in use by LabVIEW network variables bound to the DAQ Channel, or if the DAQ Channel is being used in any OPC Client software.
If you are using these lines with another task, wait for the task to complete. If you are using the device through the Traditional NI-DAQ interface, and you want to use it with NI-DAQmx, reset (initialize) the device using the Traditional NI-DAQ interface. If you are resetting the device, wait for the reset to finish.'
In the attached VI i have recreated the basic structure of my real VI (the error is present even here of course...).
How can i do?
I want to have both digital input and digital output with the same PCI-6503 every single cycle... Is it possible?
Please help me!!!
Kind regards.
I love the smell of napalm in the morning
Attachments:
DIO simultaneously error.vi ‏31 KB

Hello Maverick,
Did you have any luck with the example Raven sent you?
In Raven's example, it properly passes the DAQmx task from one SubVI to another to avoid having to open the task again. These errors are likely to occur when you have multiple DAQmx calls in a VI that call the same task again without clearing the previously opened task. If at any given time you try to open a task that already is being used, you might receive an error "resource is reserved"... similar to your original example.
If you are interested, here is an awesome link that gives a detailed explanation of the LabVIEW dataflow paradigm
Learn 10 Functions in NI-DAQmx and Handle 80 Percent of Your Data Acquisition Applications
Thanks and good luck!
Jordan Randall
National Instruments Italy

Similar Messages

Using internal Speakers and optical Output at the same time ?

Hello,
is it now possible to use the internal Speakers and optical Output at the same time ?
Is this a software or hardware limitation ?
Every day im disconnecting the optical output. It can't be good for the contacts. I wont spend over 100 euros buying an external soundcard to solve this problem.
Any Ideas ?
Thanks ? best regards
mc
IMAC 24 Intel Mac OS X (10.4.8)

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
Alternatively, you can change the status to Answered.
If we use the forums properly they will work well...

G41TM-E43 - DVI and HDMI output at the same time?

I am looking to output to 2x 1920x1200 displays...nothing 3D and nothing that needs to be decoded...just some power point presentatinos and some flash within a browser window.
I am pretty sure the resolution isn't going to be a problem, but using both the DVI and HDMI ports at the same time is something I am concerned about. I am looking for people with actual knowledge that this works...no guessing please.
Regards,
Dan

Quote
I am looking for people with actual knowledge that this works...no guessing please.
The likelihood is that you won't be able to use DVI & HDMI at the same time, but you could use one or the other in conjunction with the VGA (D-Sub) port.
But as this is a user-to-user forum, and you may have to wait for someone with actual experience of this to see this thread and respond, for a definitive answer, contact MSI Support direct:
http://support.msi.com
But please do post back with the answer, as this could be useful for others in the future with the same question.

MOVED: Re: G41TM-E43 - DVI and HDMI output at the same time?

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=144229.0

Quote
I am looking for people with actual knowledge that this works...no guessing please.
The likelihood is that you won't be able to use DVI & HDMI at the same time, but you could use one or the other in conjunction with the VGA (D-Sub) port.
But as this is a user-to-user forum, and you may have to wait for someone with actual experience of this to see this thread and respond, for a definitive answer, contact MSI Support direct:
http://support.msi.com
But please do post back with the answer, as this could be useful for others in the future with the same question.

Can I Use HDMI and Thunderbolt Outputs At The Same Time? And Mac App Store Issues

I have a Mid-2011 Mac Mini. I am currently using the HDMI output with an HDMI to Digital Input for a dell monitor. If I wanted to have a second monitor, can I use the Thunderbolt output with a MiniDisplayport to VGA adapter? I know it may sound a little unclear, so if you need a clarification, pelase let me know.
Also, on the same macine, I am having trouble connecting to the Mac App Store. My internet connection is working, and I've tried going into the Keychain Access and there isn't anything with a blue plus. When I go to Store --> Sign In , the sign in widnow doesn't appear.
Thanks
Joey

Yes, that is exactly how to use dual monitors.
Optionally:
if the second monitor has DVI input, use the MiniDisplay Port to DVI adapter.
or if it has Display Port input, then all you need is a straight MiniDisplay Port to Display Port cable.
In Quick Links try Account if Sign In does not work.

Re: H57M-GD65 - DVI and HDMI output at the same time?

Hi..,
apollos here. I also am preparing my m.b. retired my 2.5 yr old abit fatal1ty f190HD matx m.b to try this (MSI H57M-ED65 w\i5 661) My plan is port out all three 'display port, 'hdmi' and sub 15.
(L.V room hdmi projector, kitchen display port monitor, bedroom vga.) hdmi no change to L.V., vga to bedroom same.
? distances only concern is 'display port' signal....it's about 20ft. Any confirmations?
thnx,
apollos

Thnx moderator henry (for the sep)
1. I didn't really 'get' the 'iX' syntx for the topic .....so any 'i' series socket....yeah makes sense .....maybe put a couple '' for denotation. and a space bar.
2. re: hjking....wasn't intentional ....just typed....'h57m' in the 'search' box. the ' G41TM-E43' only one that came up; so I ran with it.
this is more appropriate though.
m-xmas; h-nyr!!!

Airtunes - Analog and Digital output at the same time?

Howdy,
This may seem strange to ask, but can the Airport Express output audio in digital and analog formats at the same time? Is there a strange splitter cable that could do this for me?
I recently learned that most AV receivers with digital inputs cannot output digital sources to their analog zone 2 outputs. The usual work-around is to connect their digital sources to the receiver by both analog and digital cables.
Mikael

I just learned the same thing. Does connecting the digital and analog connections to your reciever work ? Did you connect them to the same source or assign different sources for each? Thanks,

How to get the sine wave sample of the input and output in the same time?

I discovered that the samples were acquired did not in the same time in my vi.Could you tell me how to get the sine wave sample of the input and output in the same time?
Output:9263;
Input:9201
Attachments:
singal requency.vi ‏104 KB

Hello Yun_Zhu,
Your VI looks like you started from an example, and you are on the right track.
To clarify are you trying to synchronize the input and the output waveforms? If you you will need to share a time base and a start trigger. Check out the synchronization examples from LabVIEW
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
HIODAQmxSyncMultiDev.png ‏70 KB

How can i synchronize analog output and analog input timings to generate and measure voltage at the same time.

how can i synchronize analog output and analog input timings to generate and measure voltage at the same time.

Read this Tutorial
http://zone.ni.com/devzone/cda/tut/p/id/3615#toc3
And also refer to this link where You have repeated this question.
PS: Please stick to one thread. That way, its easier to keep track of your query and answers

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

Is it possible to output to div monitor and s-video at the same time?

I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

This is not possible with a mini.

Problem connecting Firewire device and external HD at the same time

Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

Bluetooth keyboard K810 and mouse T630 at the same time, repeating keys and mouse starts to stutter

I use a Lenovo Thinkpad Tablet 2, Windows 8.1(core edition), x86 (32bit).
If I pair a Bluetooth keyboard K810 and mouse T630 at the same time, with Wifi On, the keyboard starts repeating the keys and the mouse starts to stutter. Especially if WiFi is under load (when downloading something).
This doesn’t happens if I pair only the keyboard, or if I pair mouse and keyboard with Wifi OFF.
If I pair a Bluetooth keyboard and use a USB mouse with Wifi ON, everything works fine.
If I pair a Bluetooth mouse and use a USB keyboard with Wifi ON, everything works fine.
I think it is an issue with two Bluetooth devices paired at the same time with Wifi ON.
So here is a summary:
BT mouse and BT keyboard / Wifi ON ----> repeating chars and the mouse starts to stutter (bug)
BT mouse and BT keyboard / Wifi OFF ----> works fine
Only BT keyboard / Wifi ON ----> works fine
Only BT mouse / Wifi ON ----> works fine
USB mouse and BT keyboard / Wifi ON ----> works fine
USB keyboard and BT mouse / Wifi ON ----> works fine
Where is the problem? Is there any solution?
Solved!
Go to Solution.

I have solved the problem. In the Wlan-Drives-Settings there is the "Bluetooth Collaboration" option. I put the value to "Disable" and now works everything like charm.
Best regards, jC
Broadcom manual:
Bluetooth Collaboration
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.

10.3 and 8.1 at the same time

I'm trying to run 10.3 and 8.1 at the same time and have had no luck so far.
I have:
installed 10.3 in a new directory, C:\bea103
I'm running 8.1 in the default C:\bea
changed the point base ports in 8.1
changed the http/https ports in 8.1 to 8001/8002
any ideas on what else I should do?
I can start on or the other. When 10.3 is running 8.1 outputs the following to the console (Class paths have been chopped for length and the start command edited for legibility):
JAVA Memory arguments: -Xms96m -Xmx256m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Starting WLS with line:
C:\bea\JROCKI~1\bin\java
     -jrockit
     -Xdebug
     -Xnoagent
     -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
     -Djava.compiler=NONE
     -Xms96m
     -Xmx256m
     -Xverify:none
     -ea
     -da:com.bea...
     -da:javelin...
     -da:weblogic...
     -Dplatform.home=C:\bea\WEBLOG~1
     -Dwls.home=C:\bea\WEBLOG~1\server
     -Dwli.home=C:\bea\WEBLOG~1\integration
     -Dlog4j.configuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml
     -Dweblogic.management.discover=true
     -Dweblogic.ProductionModeEnabled=
     -Dejbruntime.database=pointbase44
     -Dweblogic.security.SSL.ignoreHostnameVerify=false
     -Dwlw.iterativeDev=true
     -Dwlw.testConsole=true
     -Dwlw.logErrorsToConsole=true
     -Dweblogic.Name=portalServer
     -Djava.security.policy=C:\bea\WEBLOG~1\server\lib\weblogic.policy weblogic.Server
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Stopping the Weblogic Workshop debugger...
=== Debugging ===
This window is necessary for debugging code using WebLogic Workshop
Debugger Stopped.
Stopping Pointbase server...
Pointbase server stopped.
Here is the console output when 8.1 is running and I try and start 10.3 (edited as above):
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=512m -XX:MaxPermSize=160m -XX:MaxPermSize=192m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Cleaning up license and uid files
Starting Autonomy with CONTENT_SEARCH_OPTION = full
Autonomy Distributed Search Handler engine started.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
C:\bea103\JDK160~1\bin\java
     -client
     -Xdebug
     -Xnoagent
     -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
     -Djava.compiler=NONE
     -Xms512m
     -Xmx1024m
     -XX:CompileThreshold=8000
     -XX:PermSize=256m
     -XX:MaxPermSize=512m
     -XX:MaxPermSize=160m
     -XX:MaxPermSize=192m
     -Xverify:none
     -da:org.apache.xmlbeans...
     -ea
     -da:com.bea...
     -da:javelin...
     -da:weblogic...
     -ea:com.bea.wli...
     -ea:com.bea.broker...
     -ea:com.bea.sbconsole...
     -Dplatform.home=C:\bea103\WLSERV~1.3
     -Dwls.home=C:\bea103\WLSERV~1.3\server
     -Dweblogic.home=C:\bea103\WLSERV~1.3\server
     -Xmx1024m
     -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0
     -Daldsp.home=C:\bea103\odsi_10.3
     -Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl
     -Dweblogic.wsee.bind.suppressDeployErrorMessage=true
     -Dweblogic.wsee.skip.async.response=true
     -Dwcb.properties.url="file:///c|/bea103/user_projects/domains/WCB_Developer_Domain/app
     -parms/"
     -Dlog4j.configuration=file:C:\bea103\USER_P~1\domains\WCB_DE~1\apacheLog4jCfg.xml
     -Dweblogic.management.discover=true
     -Dwlw.iterativeDev=true
     -Dwlw.testConsole=true
     -Dwlw.logErrorsToConsole=true
     -Dweblogic.ext.dirs=C:\bea103\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wlp1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wli1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_cie670\profiles\default\sysext_manifest_classpath;C:\bea103\patch_alsb1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_aldsp1030\profiles\default\sysext_manifest_classpath;C:\bea103\wlportal_10.3\p13n\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\portal\lib\system;C:\bea103\wlportal_10.3\info
     -mgmt\lib\system;C:\bea103\wlportal_10.3\analytics\lib\system;C:\bea103\wlportal_10.3\apps\lib\system;C:\bea103\wlportal_10.3\info
     -mgmt\deprecated\lib\system;C:\bea103\wlportal_10.3\content
     -mgmt\lib\system
     -Dweblogic.alternateTypesDirectory=C:\bea103\wlportal_10.3\portal\lib\security
     -Dweblogic.Name=AdminServer
     -Djava.security.policy=C:\bea103\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Stopping PointBase server...
PointBase server stopped.
\Windows was unexpected at this time.
So I'm stuck, can any one point me to some documentation or anything at all to get me moving forward on this?
Thanks
John

Hi
Did you change this 8453 to someother value for one of the domains. This looks like a Pointbase DB Debug Port. First change main pointbase db port and then change this debug port value also in setDomainEnv.cmd file.
HTH
Ravi Jegga

Getting Logic master to send to both 1-2 and 3-4 at the same time

I have an native Instruments Audio Kontrol 1 'sound card' that I'm running 2 different sets of M-Audio monitors off of. My question i, can I run the master output to both 1-2 and 3-4 at the same time so I can easily check mixes on both sets of speakers without changing every single tracks output?
Also, is this possible to do in iTunes also? I can find nothing in Logic (or anywhere) that will allow this and I initially thought my device was broken until I simply choose 3-4instead of 1-2.
thanks so much!

Pancenter wrote:
Sampleconstruct wrote:
In Logic you could just setup additional sends of your Audio tracks using the send knobs and send the signal to a Bus. Set the outputs of that Bus to 3-4 and you'll have your signal played through 1-2 as well as 3-4.
Also, if any of the audio tracks used sends (reverb on a bus..etc) those would also have to be sent to the same bus as the audio tracks.
panleft-
How about routing all the outputs that are currently on Output 1-2 to a bus first then:
Option 1: Switching that bus's output between outputs 1-2 and 3-4 (for A/B comparisons)
or
Option 2: Use the Send on that bus's output to another bus, route that second bus's output to 3-4 (so both busses are sending audio to both sets of speakers simultaneously).
As an alternative, the Mackie Big Knob is a great hardware solution for routing a signal to 3 sets of speakers, allowing you to switch among them with simple button presses.
-droo

Digital input and digital output at the same time

Similar Messages

Maybe you are looking for