Digital or Analog

I recently obtain a used Toshiba 32AF45 television and can't locate a manual for it. The RF coaxial jack is broken off, but I'm still able to use the RCA jacks to hook-up the kids Wii and DVD and get a great picture, but I would like to get a converter box that has the RF coaxial jack to connect a DVR cable box to the TV.. Wil this type of connection hurt the TV., since I don't know if the 32AF45 TV. is analog or digital. Can some one point me in the right direction, before I do something really stupid. Thanks for any help offered.
P.S.. Set was manufactured June 2005

If you are asking specifically about the telephone portion of Fios service, yes it is analog at the point your telephone or device is plugged into the jack.  If that is not what you were asking about, please be more specific about what you need to do or know.

Similar Messages

  • 32" Toshiba Regza - can i used digital to analog optical audio converter?

    32AV700A - 32" Toshiba Regza
    Can I use digital to analog optical audio converter?
    My objective is not to use LCD TV internal speakers as it's really bad since the the speakers are on the back. If i use the digital optical cable and plug in to the converter, can all my DVD and other devices connected to the LCD TV play to 1 external audio source instead internal speakers?

    Thanks for the suggestion.
    I got a bit more noise but still no coherent sound.
    What next?

  • Do we have Digital to Analog converter with high current output?

    Do we have Digital to Analog converter with high current output? I need 8 channels and each channel has at least 100mA current output.Thanks!

    I have never heard of such a device. You will probably need to follow the D/A with an amplifer for each channel.
    What is the voltage range and speed required? Any special protection requirements (such as current limiting)?
    Lynn

  • Dual Monitor (digital vs. analog) and LR2

    I have both digital and analog on my video card. Where should I place the
    main program on the digital or analog monitor?

    > Where should I place the main program on the digital or analog monitor?
    That would depend entirely on the quality of the monitor. Let us know more ... including how you intend to calibrate either (altho today's calib systems can generally do either, but sometimes not both).

  • Array of different (digital and analog) values into multigraph

    Hello everyone,
    So I have an array with a timestamp on the first column, either "off" or "on" string on the second column, and a number value string on another. The columns are based of variables that reads data based on an update rate. My question is, what is the easiest way to separate these values into a digital and analog graphs. This is because the number values are so high that the "off" and "on" signal is being pushed down as the y-axis auto-scales. I'm hoping that I can use a multigraph, but the multigraph puts the data in one graph (since it's one array). 
    Any suggestions or help is appreciated.

    Hi jachy25, 
    Below is a link to a KnowledgeBase article that goes over how to use stacked plots in LabVIEW.
    http://digital.ni.com/public.nsf/allkb/21E8163F259DA2058625703B007511AA
    The second link contains a lot of general information on configuring graphs and charts in LabVIEW, and is a useful document to have when configuring plots.
    http://zone.ni.com/reference/en-XX/help/371361L-01/lvconcepts/customizing_graphs_and_charts/
    I hope this information helps!
    Regards,
    Kelly B.
    Applications Engineering
    National Instruments

  • AD5541/5542 Digital-to-Analog converters from Analog DEvices

    Dear Friends,
    Does anybody have experience programming in Labview the AD5541 or
    AD5542 boards (Digital-to-Analog converters) from Analog Devices (http://www.analog.com/en/prod/0%2C2877%2CAD5541%2C00.html)?
    LabView code examples or description of the general approach to this task would be much appreciated!
    Thanks in advance

    ampm <[email protected]> wrote in news:[email protected]:
    > Update: My PXI system has NI-6534 board which I can use
    > for digital output. But I need to perform Digital-to-Analog conversion
    > by the remote AD5541 board.Is there a way to do this?
    That's a chip, not a board. Get the data sheet, look at the logic
    diagrams, and you should be able to bit-bang the three logic inputs (well,
    two plus a chip select) with your 6534.
    Alternatively, the chip uses SPI communication. You can probably find some
    help by searching for SPI on the NI site. It also looks like a third party
    has a $200 solution the will let you do this via a parallel port, complete
    with labview drivers, at http://www.calbay.com/product16.html
    Scott
    Reverse name to reply

  • Using Air Port for music...do I need a digital to analog converter

    I want to play my iTunes library on my old stereo using my iPod Touch as a remote control (that works well with my Bose Wave Radio).  My old stereo is an analog system. When I plug the output of my Air Port Express into my stereo though RCA cable, do I need to use a Digital to Analog Converter (DAC) or is there a DAC as part of the Air Port Express???
    Many thanks,
    Twinz

    After doing a little more digging, I find that using a Toslink cable out of the AirPort Express and into a quality external DAC, and then using RCAs to connect to my pre-amp will get much better results out of my stereo. Evidently the DAC in the AirtPort is not great quality.  So, what I'm going to do is hook up the stereo through the AirPort and listen.  If it sounds bad, I'll spring for a decent external DAC.  Many thanks!

  • Apple TV great on older DVI TV w/ simple digital to analog audio converter

    I bought a Digital to Analog Converter (DAC) for $59.95 to convert optical audio (via Toslink) to RCA analog stereo jacks.
    Device I purchased was a DAC-2016 S/PDIF to Analog RCA cnvt.
    Very compact!
    Also, bought a Belkin Toslink cable for $19.95 at the local Apple Store.
    Works perfectly with my HDTV that only has DVI and Component inputs (plus coax, component, etc.)
    I just bought it last month.
    Googled it a minute ago. Price seems to have gone back up to $89.95. (List price is $99.95.) Not available right now. Maybe Apple TV caused it to sell out.
    Let me know if any of you can find this item in stock anywhere or have another solution. I have a friend who has an older HDTV with DVI inputs.
    Thanks,
    Alan

    Finally realized that it was the Gefen box not working!?!?!?  I went to the store and asked them to try it out and they had trouble too. Another Gefen was tried and it worked. They all said they had never seen a defective one before. Thanks anyway for your help. It was appreciated!

  • Breakoutbo​x for Digital and Analog Output

    Hallo everybody
    i need  to design a breakout box with BNC and SMD connectors for Digital and Analog output (the DAQ cards we use are  PXI-6723 for analog and PXI 6259 mostly for the digital an fast AO Channels) I am looking for tutorials and info material for that. On what I have to pay attention what would be a good circuit diagramm design and so on.
    Maybe you could give me some tips where I can find good Material about that.
    Sebastian

    Hello Sebastian
    first of all I'll need some more information about your intention. What exactly are you going to do? Do you want to connect, or divide signals? (Which signals?)
    Maybe if you have a look in the manuals of the cards, you'll get closer to this. Here you can find out the pin assignment of the cards.
    Manuals and specification:
    PXI-6723:
    http://www.ni.com/pdf/manuals/370822c.pdf
    http://www.ni.com/pdf/products/us/04-3513-301-101-​DLR.pdf
    PXI-6259
    http://www.ni.com/pdf/products/us/044063301101dlr.​pdf
    http://www.ni.com/pdf/manuals/371291h.pdf
    Regarding
    Gregor Allexi

  • Can digital and analog channels be simultaneously accessed

    Hi,
    Is it possible to simultaneously access digital and analog channels on
    a Multifunction DAQ (such as NI-4351) by issuing commands from parallel
    threads using LabWindows/CVI (5.5.1)?
    John.

    Hi JAH,
    I have no experiance with this product, so can not give you a definative answer.
    The best I can do is to suggest you try it, if it does not work then you most likely can not do what you want.
    Also what version of the driver are you using, I have checked the
    download page and version 2.1 only works for CVI 6 or higher and LV 7
    or higher.
    Regards
    JamesC
    NIUK AE

  • Problem Receiving Digital and Analog Channels- 22LV610U

    I have a LCD/DVD combo TV model 22LV610U and had satellite tv for over a year and the tv worked great! After shutting off the satellite, I wanted to only receive the local channels via antenna. I bought a new RadioShack Indoor TV antenna ( to receive basic UHF, VHF and FM radio signals to HDTV and FM HD Radio signals)...
    After setting it up, I still only saw snow...I tried setting up the channels through the menu, and was not picking up any signals. I was also unable to view the "DTV Settings" options for Digital Signal...
    Do I need a different kind of antenna? I called Toshiba customer service and was told the HDTV antenna would not be compatible, however, ALL channels are now digital and must be received through this kind of antenna...
    Help, Im in a pickle Thanks!

    If you are using a STB, then you should connect it with an HDMI cable or component cable as you did.
    However, you do not need to autoprogram your TV if you are using an HDMI or component or composite or any other indirect connection. That is because the STB is acting as the tuner; it will automatically receive channel information as part of its on-screen graphics. All the HDMI connection is doing is delivering that video feed to your TV.
    Therefore, what you need to do is press the "input" button on your TV remote and select HDMI, or component, whatever you are using. Then you control the channels using your STB remote, not your TV remote, which changes the channels on your STB, not your TV. Again, your TV is only receiving the video from your STB, it's not directly changing the channel itself. It's like having a VCR and turning your TV to channel 3 in the old days; you just need to pick up the video.
    The reason why, when you tried hooking the TV up directly to the wall with coax is because most FiOS programming is encrypted digital. That is why the STB is needed to "unscramble" the channels and output them to your TV along with all of its on-screen graphics and program guide. Therefore, if you connect coax directly to the TV, the only channels you will receive are local channels (i.e. CBS, NBC, PBS), the ones that Verizon cannot by law encrypt. The reason why some of those channels are "16-2" or "17-214" is because digital broadcasting, as opposed to analog (think the digital transition last summer) uses "sub-channels," which are the -XXX. Verizon can assign whatever number they want to their encrypted programming (i.e. ESPN HD can be 214-1445) because the STB will read that channel and display it within it's own system as Ch. 570.

  • Sony digital8 camcorder via firewire port, is it digital or analog?

    hi all,
    I was successful to view & record from my Sony digital8 cam via firewire port. I'd like to know, is this connection analog or digital? Has anyone been successful to record, back up and edit their precious home videos on a G4 PowerMac? And how many DVD discs will it take on a full Digital8 cartridge?
    Thanks for your help
    Web dude

    is this connection analog or digital?
    A Firewire port is all digital.
    Has anyone been successful to record, back up and edit their precious home videos on a G4 PowerMac?
    Yes. Before the G5 came out, many people used G4s (and some still do) to edit not only home videos, but commercial television programs as well.
    how many DVD discs will it take on a full Digital8 cartridge?
    A standard DVD-5 (single layer disc) will hold about two hours of DVD-Video ... video AFTER it's been properly compressed to meet the DVD-Video standard.
    However, if you're asking about raw footage (not compressed more than it was recorded), you should be able to get close to 14 minutes of footage per 4.7gb disc. Digital8 uses the DV codec which requires about 13.3gb per hour of footage. If you recorded the tape in SP mode, you should be able to get just over 1 hour of footage per tape.
    -DH

  • Connecting 5700 with laptops' only digital AND analog output

    Hi everyone!
    Although I'm an experienced creative user this is the first time I'm posting. I looked trough the forums but I couldn't find any answer to my question and I hope this is not the "n"th time it is asked...
    I have Inspire 5700 Digital speakers and I recently bought a Sony VAIO VGN-FES laptop, with an Intel 945PM Express chipset, which features Intel HD audio. In the sound setup utility of Sigmatel HD audio, there is even an option to enable digital SPDIF output, which I enabled. But when I connect the digital din cable to my laptops only output jack (headphones...) I have no sound at all...
    I thought that it may be due to the fact that the jack is not digital only. But I still want to have real digital 5.1 audio. So could anyone tell me how I can do that?
    Thanks beforehand!

    Addlclove,
    in the sony forums the answer I recieved was that the headphone jack was normally 2.1 analog, but I didn't receive a fulfilling answer to my query about the reason to the spdif setting in the setup utility and the chipsets features. That's why I came here The only output I have on the computer is the one for the headpohes. But there is a docking station that I could buy, having an optical out.
    And Jason-CL,
    You're right, I used to have an Audigy, and I understand that you're saying that I can't do it through the headphone jack, right?
    astarem
    "hope..."

  • Fast multi-channel digital to analog converter

    Hello,
    I’m a PhD student working in a mechanics laboratory in France (LMT Cachan) and one of the goals of my thesis is to control a hydraulic testing machine using digital image correlation techniques. In order to do this, I need to take a photo of a sample, process it, extract 4 parameters and send them to the testing machine. This process needs to be repeated at a frequency of approximately 80Hz. We need a device to send these values from a Linux computer to the 4 analog entries of the machine (0-10V, 0.5 mA) by coaxial BNC cable. We managed to do this for one channel using an USB connected oscilloscope by sending a continuous current by changing the offset using C++. The problem is that this solution is too slow and has only one channel.
    For this we would need a device that has a viable and fast connection (Ethernet, PCI, even USB if recommended) that can send data from a Linux computer (ideally using C++) with a latency of around 1ms, frequency of at least 100Hz, precision of 0.1% and on 4 synchronized analog outputs. Given that I am not particularly specialized in the field of electronics, researching such a device among the large quantity of items produced by your firm proves to be a difficult task.
    I would like to know if you have a product that fits our needs and if similar purpose programming has already been done (or could easily be done) to send data from a linux computer to analog outputs (using C++ ideally).
    Best regards,
    Ionut Prisacari       

    Hi,
    I advise you to call our Sales Services 01 57 66 24 24
    They can provide you some advise and find the correct DAQ Board. Nevertheless starting with your requirements, most of them can work in your case.
    Thanks
     

  • Digital vs Analog audio meters

    hi,
    so i'm dumping from final cut to a digital betacam tape and wanted to know if anyone has a rule of thumb when setting your sound levels on the deck compared to the bars and tone's level in final cut.
    thanks.

    Is this a trick question?
    Digital Betacam format supports four channels of 20-bit/48kHz digital audio.
    If on the other hand you want to know about outputting digital audio to analog then there are digital levels used to correspond to 0 dB on an analog meter:
    1. –12 dBFS: This level is often used for 16-bit audio such as DV audio, and for projects
    with compressed dynamic ranges, such as those for television or radio.
    2. –18 or –20 dBFS: This level is more common on projects with higher dynamic range,
    such as professional post-production workflows using 20- or 24-bit audio.

Maybe you are looking for

  • Using the built-in camera as a webcam

    Hello all. I would like a way to keep an eye on my puppy while I am at work. Ideally, I would be able to open my mac and point the camera towards his cage and be able to see that through a website, like a webcam. Is this possible? Thanks for the help

  • Up-To-Date Program confirmation, over 24th hours still nothing.

    Has anyone got their App Store code yet? It's been over 24 hours and still haven't hear a word. Emailed Tunes Store/ Mac App Store Customer Support about it and told me to email uptodate support and haven't heard back. Just wondering how long it usua

  • Error in a view query

    Hi, I'm triyng to create a view but I couldn't due to I have the following error: ora-00904: esml.sml_obsol_movimientos.cosicltr. Invalid identifier. The view is: select obm.cosicltr, case obm.cosicltr when 'AL' then count(obm.cosicltr) when 'LI' the

  • Half of pic being cut off in FCP

    Hi, I am a high school student working on a documentary for our island and am new to FCP, so all answers are welcome and all hints to working with FCP are greatly appreciated. but my main problem is this: Whenever I open a still image picture in Fina

  • Forgot security answers and rescue email

    I WANT TO MAKE A IN APP PURCHASES AND IT ASK ME TO FILL IN THE SECURITY ANSWER, I FORGOT MY APPLE ID SECURITY ANSWERS AND RESCUE EMAIL TOO, ALSO TRY CALLED SUPPORT CENTER BUT THE SUPPORT CENTER IS CLOSE. WHAT CAN I DO NOW ? PLASE HELP ME (T-T)