'Digital Output Only' option not work

When I have that option ticked on I still get audio from analog output.Message Edited by vazel on 04-30-2008 06:39 PM

is a red light shining out of the port were external speakers/headphones plug in?

Similar Messages

  • Send to Audition - Work Area Only option not working as expected

    Just an odd one I came across today and can't see why it is doing this.
    Have part of a sequence that needs to have some work done on the audio so I mark in and out points (and also set my work area to the part in question) and then choose Edit > Edit in Adobe Audition. This then gives me the dialog box and I choose the Work Area only option. However, when Audition opens I get the small section of audio that I need but it has a huge blank space in front of it?? Anyone know what this is happening? I assume it is the area of timeline from Premiere that is ahead of the section I wish to work on but can't see why this needs to be brought in like this.
    Can anyone advise please if I am following the workflow correctly.
    Cheers
    Alex

    As it turns out, setting this up was simple, one I figured out the "imsimta program" thing.
    Here's what I did to get this working.
    1. Created the following shell script named "deliver-listserv" in the /var/opt/SUNWmsgsr/site-programs directory:
    #!/bin/ksh
    #       Script to invoke the LISTSERV lsv_amin command when a
    # message is sent to a mailing list.
    LISTSERV_HOME=~listserv
    LSV_AMIN=$LISTSERV_HOME/bin/lsv_amin
    SPOOL_DIR=$LISTSERV_HOME/spool
    listAddress=$1
    listAddress=${listAddress%+listserv}
    if [ "$listAddress" = "" ];then
            exit 1
    fi
    exec $LSV_AMIN $SPOOL_DIR $listAddress2. Set the permissions of the above script to 755.
    3. Added this program to the list of approved programs using the imsimta program command:
    imsimta program -a -m listserv -p deliver-listserv -e postmaster -g "%s"4. For each list in question, created a mailbox for all of the addresses required by LISTSERV (in this case, test, owner-test, test-request, test-search-request, test-server, test-signoff-request, and test-subscribe-request).
    5. For each of the mailboxes created in #5, set the mail delivery options to run the message using the listserv method defined in #3 by checking the "Enable the following programs" checkbox and specifying "listserv" in the command text box. This sets the following attributes in the mailbox's LDAP entry:
    mailDeliveryOption: program
    mailProgramDeliveryInfo: listservThat's all it takes. Since I specified the "-g" option to supply the username when the program is called, the string "test+listserv" is passed to my script, where I simply strip off the "+listserv" and then invoke the lsv_amin program to handle the delivery. Darned if it didn't work on the first try!
    Bill

  • Dtt3500 and Audigy Gamer, digital output only 2 channel unless its D

    Ok I recieved a response concerning my last comment but unfortunatly it did not answer my question at all. I have a DTT3500 and a sound blaster Audigy Gamer hooked up with the digital out to the /8 din adapter. I try the advanced 3d demo that came with the Audigy software and I only hear the front 2 channels, no center and no rears. The demo where you move the little icons and sound moves along with it. I have 5. activated in my windows control center along with audioHQ and digital out only is selected. my DTT3500 has 4./5. digital selected along with dolby digital/pcm audio and digital in. I am not getting the effect of multisurround at all. My center works and my rears work because playing music I can use all 5 speakers. When I use the analogue outputs I hear multisurround from the advanced 3d demo but my center doesnt work. The analogue setup sounds better but without a center channel its useless to me. Am I doing something wrong? I am using the adapter and digital DIN, what gives? The only reason I noticed I wasnt getting surround was while playing games nothing comes from behind you even on 5. games. The goldmine demo doesnt even work right, when the bird flys behind you it disappears but there is still sound from the rears. Analogue fixes this without a center but the manual and setup say to use the digital din. Do I just have a setting wrong? I would like to experiance the full capacity of multispeakers in my games.

    Dennis,
    With these speakers the connection that I would suggest would be to use the Digital out on the back of the sound card into the DIN Input on the DTT3500's. This will require a converter cable for /8'' Minidin to standard DIN which can be purchased from here:
    http://us.creative.com/products/prod...0&product=0375
    You will also need a standard DIN cable (one should have shipped with your DTT3500's).
    This should give you 5. with digital output only enabled on the Audigy.
    Jeremy

  • HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system

    HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system
    Please help, if any one knows any solution.

    Hi @Firoskhan,
    Welcome to the HP Forums!
    I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
    Hope this helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • No "Digital Output Only" opti

    Hey guys, I have an Audigy 2 Value, and I am trying to output via the digital out, I have the mono to coax cable and everything ready into my receiver but I don't have the option in my controls to tick "Digital Output Only", which is what I have heard I have to do?
    Anyone have any ideas why it isn't there? Or how I can get it there?
    Thanks in advance.Message Edited by SubElement on 02--2006 0:04 AM

    No one?

  • Email notifications are the only thing NOT working!!!

    Email notifications are the only thing NOT working!!! Everything is set up correctly. The form works and the person submitting gets a message, but I don't. I tried 3 different email addresses and still not working. Any real fix for this?

    Hello:
    Try resetting the PRAM.
    Barry

  • HT1277 How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info Messages on server.

    How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info > Messages on server. What am I doing wrong?

    Mail > Preferences… > Accounts > Advanced > Remove copy from server after retrieving a message

  • Wifi option not working in my i phone 4s ios 7.0.2, how to fix it

    wifi option not working in my i phone 4s ios 7.0.2, how to fix it

    Now my wifi is working but not showing the wifi logo on the top

  • Windows key inoperative dv7-4285 windows 7 - 64 bit. only key not working

    Windows key inoperative dv7-4285 Windows 7 - 64 bit. The Windows key is the only key not working.

    Thanks for the information,
    I have a couple of suggestions that may help with this issue. My first suggestion would be to uninstall and reinstall the drivers for the keyboard.
    Follow these steps to do that:
    Click the "Start Menu"
    Type "Device" in the search box under all programs
    Select "Device Manager"
    Click "Keyboards"
    Remove all devices under keyboards by right clicking and selecting" uninstall" on each device
    Restart the computer
    How long has the button not been working?
    Are there any other keys not working or producing the wrong character?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Toggle 'digital output only"--Is there a way to create a shortc

    Hi,I have Audigy SE with Digital I/O module. I run optical cable from the digital i/o module to my home theater. I also run 3.5 mm cable from green output of audigy card to my vintage 995 Altec Lansing analog 2.0 speakers. The idea is to be able to switch to little speakers and still hear the computer while the wife watches the television. The downside is that switching requires going through the control panel and several steps to un-check the digital output only box in the Audigy properties. Is there a way to write a program to toggle the digital/analog output from a single desktop shortcut/button?ThanksB

    Check the source code of gegeg's fix for digital-out resetting (it's a sticky thread). The program turns on the digital out but it can be modified to toggle it.

  • How do I resolve: Field Selection dialog [Pick... button] in "Mark as read-only" section of Signed tab for Digital Signature field is not working

    I am using Acrobat Pro X on Windows 7 Enterprise x64 to create a form. When I have a simple form with a few fields, I am able to use the "Pick..." button to select the fields I want to select, but in a more complex form (20 fields with 3 Signature fields) The Field Selection dialog does not work. I can make the selections, but they are not saved. Removing fields does not resolve issue. IF I start with a blank form and add a few fields, the dialog will work, but after adding more, it quits working. Reader XI is also installed.

    And that is why many responders use only the custom JavaScript calculation option.
    The UI for the select fields and simplified field nations are only a way to pass field names to a JavaScript function that performs the actual calculation. Sometimes these functions call other functions and pass the parameters can lead to errors in the attempted code.
    I would start to learn code JavaScript for Acrobat.
    The pick field dialog is for performing calculations involving sums, products, averages, minimum, and maximum. I am not sure how that would work with a digital signature. Once a signature is applied the form fields could be locked.

  • No internal speakers | digital output only | red light from audio jack

    I plugged in a stereo through analogue mini jack to the headphone socket of my mac book pro. When i unplugged the stereo, the internal speakers failed to work. There is now a red light coming from the jack as if a "digital output" is plugged into the socket. But no digital output has ever been plugged into the socket - and I have no control of mute or volume settings.
    When I plug headphones in, they work fine and I have control of mute and volume settings. Once the headphones are removed I am automatically set back to "digital output" with no control over mute or volume, and no audio from m internal speakers.
    I have tried changing the settings in system preferences/sound/settings/output ... but there is no option other than "digital output". I suppose I would like to select "internal speakers" but there is no option for this. And like I stated earlier, the jack is lit up red.
    I've tried software updates, restarts, disk utilities (permissions and repairs including repairing with the startup disk), plugging and unplugging, but to no avail.
    When I try to change the volume on the keyboard's volume controls I get the "no entry" sign under the volume bar and have no control (as if it were stuck on mute).
    The only thing I can think of is that I forced a mini jack into the headphone socket too hard so I'm worried that I've damaged the hardware.
    Could this have caused the problem? Or is this a software issue? Any help would be appreciated.
    In short I have no sound from the internal speakers.

    Same here. I don't remember doing anything out of the ordinary. I was working in Parallels on getting a AM station to stream via some web interface. Next time I went to play sound on the internal speakers, no go.
    I've tried zapping the PRAM, toggling the headphone jack and the toothpick thing. Nothing seems to work.
    I've also noticed that I get sound in my headphones in iTunes but not in Garageband (someone had suggested that starting up Garageband would reset things.
    Any other ideas out there?
    Is there a file that could get corrupted that I could switch out of my back up?

  • Output speakers do not work, have a red light coming out of my headph. jack

    My headphone jack works but theres a red light coming out of my headphone jack when its unplugged and my internal speakers will not work...anybody have an idea? Tried system preferences and says no options for selected audio and cant get any sound for my built in output speakers and my volume display in my bar is faded....HELP!

    @Spencer
    I know this thread was marked answered but thought I should chime in since my MBP (2.66Ghz Late '08, bought May '09) started to exhibit this behavior. I was getting "No Output" greyed out speaker images and the red light coming out from the headphone jack. It's been intermittent but finally wouldn't go away so I figured I'd contact Appe.
    This afternoon I called Applecare and was advised to take it to the Apple store... no questions asked, no troubleshooting steps, just told me to take it to the store and even offered to make me an appt. I was able to get an appointment at the genius bar same day (literally 2 hours after I hung up the phone). My wife took a ride with me and we headed down there.
    When I showed the technician she tested it and then went to the back room to double check something. When she came back she told me that it was hardware related and needed to be sent in for service. I am under warranty so it was no skin off my back but I will need to be without the machine for a few days.
    I agree with Rod to take it in, esp. if you're still under warranty. I should also mention that this only started happening a few weeks ago but the red light part was rather sudden.
    Good luck!

  • 'Get All New Data Request by Request' option not working Between DSO n Cube

    Hi BI's..
             Could anyone please tell me why the option ' Get one Request only' and  'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
    Scenario:
    I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to  'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
    Regards,
    Sari.

    Hi,
    How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
    Delta Init. Extraction from...
    - Active Table (with archive)
    - Active Table (without archive)
    - Archive ( full extraction only)
    - Change Log
    Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
    Hope that helps.
    Regards
    Mr Kapadia
    *Assigning points is the way to say thanks*

  • InfoPath 2013 - Rich Text box - Expand to show all text option not working

    I have create an InfoPath form and created a view which will be used for printing. I have a rich text box in this print view and the scroll option for this rich text box is set to "Expand to show all text". However, it is not working and it doesn't
    expand the size of the text box based on the content length.
    same thing used to work in InfoPath 2010.
    Any suggestions?
    Thanks,
    Neelesh

    Hi Wendy,
    Here are the steps I have used:
    1. On default view added a rich text box.
    2. Created another view called Print and mapped it to the same Field which I added to default view
    3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
    view. Also set the height of the rich text box to auto.
    4. Set the print views as the print view for default view
    5. Deployed the form to SharePoint Form Library
    6. Opened the form in browser
    7. Entered the content in the rich text box in default view. It expands well if I have much content
    8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
    I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
    It does work fine in InfoPath client.
    Thanks.

Maybe you are looking for